[torch.compile] Add compile-only mode

Summary
=======

This PR is on the way to overlapping torch.compile and weight loading. See [design doc]([https://docs.google.com/document/d/1hssZeQv_lJlKqOr0vfpoqEUNn4ASGHVRB9a49yhcY6E/edit?tab=t.0](https://docs.google.com/document/d/1hssZeQv_lJlKqOr0vfpoqEUNn4ASGHVRB9a49yhcY6E/edit?tab=t.0)) and [proof-of-concept PR](https://github.com/vllm-project/vllm/pull/36072) and [RFC](https://github.com/vllm-project/vllm/issues/34956)

- Adds `vllm compile <model> [options]` CLI command and `vllm.compile_model()` Python API
- These APIs populate vLLM's torch.compile cache and do nothing else. A subsequent `vllm serve` call can read from the cache and perform a warm start.
- They also use minimal GPU memory. This is accomplished through a combination of using FakeTensors (tensors with no storage that report device correctly) and Meta tensors (tensors with no storage that report device="meta"). Note that there is still some minimal GPU memory allocation (< 10 Mb, from GPUModelRunner runtime buffers), I did not go track down all of it, but I'm also not sure it matters.
- In the future we can extend "vllm compile" to more than just torch.compile; for example, if vLLM uses triton kernels, or JIT'ed flashinfer kernels, `vllm compile` may also just compile those and saved the compiled artifacts somewhere.

How it works
============
- `FakeModelLoader` wraps the real model loader. It initializes weights on `meta` device and runs weight post-processing on meta tensors.
- Before torch.compile tracing, `swap_meta_params_to_fake()` converts meta params to FakeTensors. This is required so that torch.compile sees Tensors with the correct devices.
- In theory we should also get the FakeModelLoader to give us FakeTensors, but FakeTensors do not yet support the type of Tensor subclasses that vLLM uses.
- We raise the `CompilationDone` exception after cache artifacts are saved to avoid executing with fake tensors. (calling torch.compile performs both the compilation and an initial run of invoking the compiled artifact with the inputs)
- `EngineCore` early-returns after `compile_or_warm_up_model`, skipping KV cache allocation, scheduler, and sampler setup

Test plan
=========
- Added tests for compile_only cold start followed by a warm start. The tests verify that the compile_only cold start uses no GPU memory, and the warm start does end up reading from the cache.

Future work
===========
In the following order:
- add an option to overlap torch.compile and weight loading. The main process will do weight loading while spawning a new process to do compile-only work (that does not use gpu memory)
- Extend this design to more weight loading schemes. For example, we currently support no weight processing. This will involve getting the additional weight processing to support meta tensors.

Signed-off-by: Richard Zou <zou3519@gmail.com>

.buildkite/ci_config.yaml

@@ -8,8 +8,8 @@ run_all_patterns:
   - "CMakeLists.txt"
   - "requirements/common.txt"
   - "requirements/cuda.txt"
-  - "requirements/build/cuda.txt"
-  - "requirements/test/cuda.txt"
+  - "requirements/build.txt"
+  - "requirements/test.txt"
   - "setup.py"
   - "csrc/"
   - "cmake/"

.buildkite/ci_config_intel.yaml

@@ -6,8 +6,8 @@ run_all_patterns:
   - "CMakeLists.txt"
   - "requirements/common.txt"
   - "requirements/xpu.txt"
-  - "requirements/build/cuda.txt"
-  - "requirements/test/cuda.txt"
+  - "requirements/build.txt"
+  - "requirements/test.txt"
   - "setup.py"
   - "csrc/"
   - "cmake/"

.buildkite/hardware_tests/amd.yaml

@@ -5,6 +5,7 @@ steps:
     depends_on: []
     device: amd_cpu
     no_plugin: true
+    soft_fail: true
     commands:
     - >
       docker build

.buildkite/hardware_tests/cpu.yaml

@@ -46,7 +46,7 @@ steps:
   - tests/models/language/pooling/
   commands:
     - |
-      bash .buildkite/scripts/hardware_ci/run-cpu-test.sh 40m "
+      bash .buildkite/scripts/hardware_ci/run-cpu-test.sh 30m "
       pytest -x -v -s tests/models/language/generation -m cpu_model
       pytest -x -v -s tests/models/language/pooling -m cpu_model"
 
@@ -69,11 +69,11 @@ steps:
       pytest -x -v -s tests/quantization/test_compressed_tensors.py::test_compressed_tensors_w8a8_logprobs
       pytest -x -v -s tests/quantization/test_cpu_wna16.py"
       
-- label: CPU-Distributed Tests (PP+TP)
+- label: CPU-Distributed Tests
   depends_on: []
   device: intel_cpu
   no_plugin: true
-  source_file_dependencies: &cpu_distributed_deps
+  source_file_dependencies:
   - csrc/cpu/shm.cpp
   - vllm/v1/worker/cpu_worker.py
   - vllm/v1/worker/gpu_worker.py
@@ -82,21 +82,10 @@ steps:
   - vllm/platforms/cpu.py
   - vllm/distributed/parallel_state.py
   - vllm/distributed/device_communicators/cpu_communicator.py
-  - .buildkite/scripts/hardware_ci/run-cpu-distributed-smoke-test.sh
   commands:
     - |
       bash .buildkite/scripts/hardware_ci/run-cpu-test.sh 10m "
-      bash .buildkite/scripts/hardware_ci/run-cpu-distributed-smoke-test.sh tp_pp"
-
-- label: CPU-Distributed Tests (DP+TP)
-  depends_on: []
-  device: intel_cpu
-  no_plugin: true
-  source_file_dependencies: *cpu_distributed_deps
-  commands:
-    - |
-      bash .buildkite/scripts/hardware_ci/run-cpu-test.sh 10m "
-      bash .buildkite/scripts/hardware_ci/run-cpu-distributed-smoke-test.sh dp_tp"
+      bash .buildkite/scripts/hardware_ci/run-cpu-distributed-smoke-test.sh"
 
 - label: CPU-Multi-Modal Model Tests %N
   depends_on: []
@@ -110,7 +99,7 @@ steps:
     - |
       bash .buildkite/scripts/hardware_ci/run-cpu-test.sh 45m "
       pytest -x -v -s tests/models/multimodal/generation --ignore=tests/models/multimodal/generation/test_pixtral.py -m cpu_model --num-shards=$$BUILDKITE_PARALLEL_JOB_COUNT --shard-id=$$BUILDKITE_PARALLEL_JOB"
-  parallelism: 3
+  parallelism: 2
 
 - label: "Arm CPU Test"
   depends_on: []

.buildkite/image_build/image_build.sh

@@ -92,8 +92,8 @@ check_and_skip_if_image_exists() {
 }
 
 ecr_login() {
-    aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin "$REGISTRY" || true
-    aws ecr get-login-password --region us-east-1 | docker login --username AWS --password-stdin 936637512419.dkr.ecr.us-east-1.amazonaws.com || true
+    aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin "$REGISTRY"
+    aws ecr get-login-password --region us-east-1 | docker login --username AWS --password-stdin 936637512419.dkr.ecr.us-east-1.amazonaws.com
 }
 
 prepare_cache_tags() {
@@ -192,7 +192,6 @@ export BUILDKITE_COMMIT
 export PARENT_COMMIT
 export IMAGE_TAG
 export IMAGE_TAG_LATEST
-export COMMIT="${COMMIT:-${BUILDKITE_COMMIT}}"
 export CACHE_FROM
 export CACHE_FROM_BASE_BRANCH
 export CACHE_FROM_MAIN

.buildkite/image_build/image_build_cpu.sh

@@ -11,7 +11,7 @@ REPO=$2
 BUILDKITE_COMMIT=$3
 
 # authenticate with AWS ECR
-aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin "$REGISTRY" || true
+aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin "$REGISTRY"
 
 # skip build if image already exists
 if [[ -z $(docker manifest inspect "$REGISTRY"/"$REPO":"$BUILDKITE_COMMIT"-cpu) ]]; then

.buildkite/image_build/image_build_cpu_arm64.sh

@@ -11,7 +11,7 @@ REPO=$2
 BUILDKITE_COMMIT=$3
 
 # authenticate with AWS ECR
-aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin "$REGISTRY" || true
+aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin "$REGISTRY"
 
 # skip build if image already exists
 if [[ -z $(docker manifest inspect "$REGISTRY"/"$REPO":"$BUILDKITE_COMMIT"-arm64-cpu) ]]; then

.buildkite/image_build/image_build_torch_nightly.sh

@@ -1,68 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-
-# Build a vLLM test image with PyTorch nightly installed.
-# Called by the pipeline generator's "vLLM Against PyTorch Nightly" group.
-
-if [[ $# -lt 5 ]]; then
-  echo "Usage: $0 <registry> <repo> <commit> <branch> <image_tag>"
-  exit 1
-fi
-
-REGISTRY=$1
-REPO=$2
-BUILDKITE_COMMIT=$3
-BRANCH=$4
-IMAGE_TAG=$5
-
-# --- Arguments ---
-echo "--- :mag: Arguments"
-echo "REGISTRY: ${REGISTRY}"
-echo "REPO: ${REPO}"
-echo "BUILDKITE_COMMIT: ${BUILDKITE_COMMIT}"
-echo "BRANCH: ${BRANCH}"
-echo "IMAGE_TAG: ${IMAGE_TAG}"
-
-# --- ECR login ---
-echo "--- :key: ECR login"
-aws ecr-public get-login-password --region us-east-1 \
-  | docker login --username AWS --password-stdin "$REGISTRY"
-aws ecr get-login-password --region us-east-1 \
-  | docker login --username AWS --password-stdin 936637512419.dkr.ecr.us-east-1.amazonaws.com
-
-# --- Set up buildx ---
-echo "--- :docker: Setting up buildx"
-docker buildx create --name vllm-builder --driver docker-container --use || true
-docker buildx inspect --bootstrap
-docker buildx ls
-
-# --- Skip if image already exists ---
-echo "--- :mag: Checking if image already exists"
-if docker manifest inspect "$IMAGE_TAG" >/dev/null 2>&1; then
-  echo "Image found: $IMAGE_TAG — skipping build"
-  exit 0
-fi
-echo "Image not found, proceeding with build..."
-
-# --- CUDA 13.0 for nightly builds ---
-# Nightly CI uses CUDA 13.0 while regular CI stays on CUDA 12.9
-NIGHTLY_CUDA_VERSION="13.0.2"
-NIGHTLY_BUILD_BASE_IMAGE="nvidia/cuda:${NIGHTLY_CUDA_VERSION}-devel-ubuntu22.04"
-NIGHTLY_FINAL_BASE_IMAGE="nvidia/cuda:${NIGHTLY_CUDA_VERSION}-base-ubuntu22.04"
-
-echo "--- :docker: Building torch nightly image (CUDA ${NIGHTLY_CUDA_VERSION})"
-docker buildx build --file docker/Dockerfile \
-  --build-arg max_jobs=16 \
-  --build-arg buildkite_commit="$BUILDKITE_COMMIT" \
-  --build-arg USE_SCCACHE=1 \
-  --build-arg PYTORCH_NIGHTLY=1 \
-  --build-arg CUDA_VERSION="${NIGHTLY_CUDA_VERSION}" \
-  --build-arg BUILD_BASE_IMAGE="${NIGHTLY_BUILD_BASE_IMAGE}" \
-  --build-arg FINAL_BASE_IMAGE="${NIGHTLY_FINAL_BASE_IMAGE}" \
-  --build-arg torch_cuda_arch_list="8.0 8.9 9.0 10.0 12.0" \
-  --tag "$IMAGE_TAG" \
-  --push \
-  --target test \
-  --progress plain .
-
-echo "--- :white_check_mark: Torch nightly image build complete: $IMAGE_TAG"

.buildkite/intel_jobs/engine_intel.yaml

@@ -1,21 +0,0 @@
-group: Engine Intel
-depends_on:
-  - image-build-xpu
-steps:
-- label: Engine (1 GPU)
-  timeout_in_minutes: 30
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/v1/engine/
-    - tests/v1/engine/
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'cd tests &&
-      pytest -v -s v1/engine --ignore v1/engine/test_preprocess_error_handling.py'

.buildkite/intel_jobs/kernels_intel.yaml

@@ -1,21 +0,0 @@
-group: Kernels Intel
-depends_on: 
-  - image-build-xpu
-steps:
-- label: vLLM IR Tests
-  timeout_in_minutes: 30
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/ir
-    - vllm/kernels
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'cd tests &&
-      pytest -v -s kernels/ir'

.buildkite/intel_jobs/lora_intel.yaml

@@ -1,129 +0,0 @@
-group: LoRA Intel
-depends_on:
-  - image-build-xpu
-steps:
-- label: LoRA Runtime + Utils
-  timeout_in_minutes: 45
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/lora
-    - tests/lora
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'cd tests &&
-      pytest -v -s lora/test_layers.py &&
-      pytest -v -s lora/test_lora_checkpoints.py &&
-      (pytest -v -s lora/test_lora_functions.py --deselect="tests/lora/test_lora_functions.py::test_lora_functions_sync" --deselect="tests/lora/test_lora_functions.py::test_lora_functions_async" || true) &&
-      pytest -v -s lora/test_lora_huggingface.py &&
-      pytest -v -s lora/test_lora_manager.py &&
-      pytest -v -s lora/test_lora_utils.py &&
-      pytest -v -s lora/test_peft_helper.py &&
-      pytest -v -s lora/test_resolver.py &&
-      pytest -v -s lora/test_utils.py &&
-      (pytest -v -s lora/test_add_lora.py --deselect="tests/lora/test_add_lora.py::test_add_lora" || true) &&
-      (pytest -v -s lora/test_worker.py --deselect="tests/lora/test_worker.py::test_worker_apply_lora" || true)'
-
-- label: LoRA Fused/MoE Kernels
-  timeout_in_minutes: 45
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/lora
-    - tests/lora
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'cd tests &&
-      pytest -v -s lora/test_fused_moe_lora_kernel.py && 
-      pytest -v -s lora/test_moe_lora_align_sum.py'
-
-- label: LoRA Punica Kernels
-  timeout_in_minutes: 45
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/lora
-    - tests/lora
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'cd tests &&
-      set -o pipefail &&
-      pytest -v -s lora/test_punica_ops.py --deselect="tests/lora/test_punica_ops.py::test_kernels[shrink-0-xpu:0-dtype0-2-2049-64-32-32]" --deselect="tests/lora/test_punica_ops.py::test_kernels_hidden_size[expand-0-xpu:0-dtype1-2-64000-32-4-4]" --deselect="tests/lora/test_punica_ops.py::test_kernels[shrink-0-xpu:0-dtype0-1-2049-128-1-32]" --deselect="tests/lora/test_punica_ops.py::test_kernels[shrink-0-xpu:0-dtype0-1-2049-256-1-4]" --deselect="tests/lora/test_punica_ops.py::test_kernels[shrink-0-xpu:0-dtype0-1-2049-256-8-4]" --deselect="tests/lora/test_punica_ops.py::test_kernels[expand-0-xpu:0-dtype0-3-2049-128-8-16]" --deselect="tests/lora/test_punica_ops.py::test_kernels[shrink-0-xpu:0-dtype0-1-2049-128-8-32]" --deselect="tests/lora/test_punica_ops.py::test_kernels[expand-0-xpu:0-dtype1-1-2049-256-128-32]" --deselect="tests/lora/test_punica_ops.py::test_kernels_hidden_size[shrink-0-xpu:0-dtype0-3-64256-32-4-4]" --deselect="tests/lora/test_punica_ops.py::test_kernels_hidden_size[shrink-0-xpu:0-dtype1-2-29696-32-4-4]" --deselect="tests/lora/test_punica_ops.py::test_kernels_hidden_size[shrink-0-xpu:0-dtype1-3-49408-32-4-4]" --deselect="tests/lora/test_punica_ops.py::test_kernels_hidden_size[shrink-0-xpu:0-dtype0-2-16384-32-4-4]" --deselect="tests/lora/test_punica_ops.py::test_kernels_hidden_size[expand-0-xpu:0-dtype0-2-51328-32-4-4]" --deselect="tests/lora/test_punica_ops.py::test_kernels_hidden_size[expand-0-xpu:0-dtype1-1-102656-32-4-4]"'
-
-- label: LoRA Punica FP8/XPU Ops
-  timeout_in_minutes: 45
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/lora
-    - tests/lora
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'cd tests &&
-      pytest -v -s lora/test_punica_ops_fp8.py &&
-      pytest -v -s lora/test_punica_xpu_ops.py'
-
-- label: LoRA Models
-  timeout_in_minutes: 45
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/lora
-    - tests/lora
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'cd tests &&
-      (pytest -v -s lora/test_mixtral.py --deselect="tests/lora/test_mixtral.py::test_mixtral_lora[4]" || true) &&
-      pytest -v -s lora/test_quant_model.py --deselect="tests/lora/test_quant_model.py::test_quant_model_lora[model0]" --deselect="tests/lora/test_quant_model.py::test_quant_model_lora[model1]" --deselect="tests/lora/test_quant_model.py::test_quant_model_tp_equality[model0]" &&
-      pytest -v -s lora/test_qwen35_densemodel_lora.py &&
-      pytest -v -s lora/test_transformers_model.py'
-
-- label: LoRA Multimodal
-  timeout_in_minutes: 45
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/lora
-    - tests/lora
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'cd tests &&
-      pytest -v -s lora/test_default_mm_loras.py && 
-      (pytest -v -s lora/test_qwen3_unembed.py || true) &&
-      pytest -v -s lora/test_whisper.py'

.buildkite/intel_jobs/misc_intel.yaml

@@ -1,55 +0,0 @@
-group: Miscellaneous Intel
-depends_on:
-  - image-build-xpu
-steps:
-- label: V1 Core + KV + Metrics
-  timeout_in_minutes: 30
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/
-    - tests/v1/core
-    - tests/v1/executor
-    - tests/v1/kv_offload
-    - tests/v1/worker
-    - tests/v1/kv_connector/unit
-    - tests/v1/metrics
-    - tests/entrypoints/openai/correctness/test_lmeval.py
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'pip install -r requirements/kv_connectors.txt &&
-      export VLLM_WORKER_MULTIPROC_METHOD=spawn &&
-      cd tests &&
-      pytest -v -s v1/executor'
-
-- label: V1 Sample + Logits
-  timeout_in_minutes: 30
-  device: intel_gpu
-  no_plugin: true
-  working_dir: "."
-  env:
-    REGISTRY: "public.ecr.aws/q9t5s3a7"
-    REPO: "vllm-ci-test-repo"
-    VLLM_TEST_DEVICE: "xpu"
-  source_file_dependencies:
-    - vllm/
-    - tests/v1/sample
-    - tests/v1/logits_processors
-    - tests/v1/test_oracle.py
-    - tests/v1/test_request.py
-    - tests/v1/test_outputs.py
-  commands:
-    - >-
-      bash .buildkite/scripts/hardware_ci/run-intel-test.sh
-      'export VLLM_WORKER_MULTIPROC_METHOD=spawn &&
-      cd tests &&
-      pytest -v -s v1/logits_processors &&
-      pytest -v -s v1/test_oracle.py &&
-      pytest -v -s v1/test_request.py &&
-      pytest -v -s v1/test_outputs.py'

.buildkite/intel_jobs/test-intel.yaml

@@ -35,7 +35,6 @@ steps:
         python3 examples/basic/offline_inference/generate.py --model facebook/opt-125m --block-size 64 --enforce-eager -tp 2 --distributed-executor-backend mp &&
         python3 examples/basic/offline_inference/generate.py --model facebook/opt-125m --block-size 64 --enforce-eager --attention-backend=TRITON_ATTN &&
         python3 examples/basic/offline_inference/generate.py --model facebook/opt-125m --block-size 64 --enforce-eager --quantization fp8 &&
-        python3 examples/basic/offline_inference/generate.py --model facebook/opt-125m --block-size 64 --enforce-eager --kv-cache-dtype fp8 &&
         python3 examples/basic/offline_inference/generate.py --model superjob/Qwen3-4B-Instruct-2507-GPTQ-Int4 --block-size 64 --enforce-eager --max-model-len 8192 &&
         python3 examples/basic/offline_inference/generate.py --model ibm-research/PowerMoE-3b --block-size 64 --enforce-eager -tp 2 &&
         python3 examples/basic/offline_inference/generate.py --model ibm-research/PowerMoE-3b --block-size 64 --enforce-eager -tp 2 --enable-expert-parallel'
@@ -57,9 +56,9 @@ steps:
         'cd tests &&
         pytest -v -s v1/core --ignore=v1/core/test_reset_prefix_cache_e2e.py --ignore=v1/core/test_scheduler_e2e.py &&
         pytest -v -s v1/engine --ignore=v1/engine/test_output_processor.py &&
-        pytest -v -s v1/sample --ignore=v1/sample/test_logprobs.py --ignore=v1/sample/test_logprobs_e2e.py -k "not test_topk_only and not test_topp_only and not test_topk_and_topp" &&
+        pytest -v -s v1/sample --ignore=v1/sample/test_logprobs.py --ignore=v1/sample/test_logprobs_e2e.py &&
         pytest -v -s v1/worker --ignore=v1/worker/test_gpu_model_runner.py --ignore=v1/worker/test_worker_memory_snapshot.py &&
         pytest -v -s v1/structured_output &&
         pytest -v -s v1/test_serial_utils.py &&
         pytest -v -s v1/spec_decode --ignore=v1/spec_decode/test_max_len.py --ignore=v1/spec_decode/test_tree_attention.py --ignore=v1/spec_decode/test_speculators_eagle3.py --ignore=v1/spec_decode/test_acceptance_length.py &&
-        pytest -v -s v1/kv_connector/unit --ignore=v1/kv_connector/unit/test_multi_connector.py --ignore=v1/kv_connector/unit/test_example_connector.py --ignore=v1/kv_connector/unit/test_lmcache_integration.py --ignore=v1/kv_connector/unit/test_hf3fs_client.py --ignore=v1/kv_connector/unit/test_hf3fs_connector.py --ignore=v1/kv_connector/unit/test_hf3fs_metadata_server.py'
+        pytest -v -s v1/kv_connector/unit --ignore=v1/kv_connector/unit/test_multi_connector.py --ignore=v1/kv_connector/unit/test_nixl_connector.py --ignore=v1/kv_connector/unit/test_example_connector.py --ignore=v1/kv_connector/unit/test_lmcache_integration.py'

.buildkite/lm-eval-harness/configs/Meta-Llama-4-Maverick-17B-128E-Instruct-FP8.yaml

@@ -1,9 +1,6 @@
 # For hf script, without -t option (tensor parallel size).
 # bash .buildkite/lm-eval-harness/run-lm-eval-mmlupro-vllm-baseline.sh -m meta-llama/Llama-4-Maverick-17B-128E-Instruct-FP8 -l 250 -t 8 -f 5
 model_name: "meta-llama/Llama-4-Maverick-17B-128E-Instruct-FP8"
-required_gpu_arch:
-  - gfx942
-  - gfx950
 tasks:
 - name: "mmlu_pro"
   metrics:

.buildkite/lm-eval-harness/configs/Qwen2.5-VL-3B-Instruct-FP8-dynamic.yaml

@@ -1,9 +1,6 @@
 # For vllm script, with -t option (tensor parallel size)
 # bash .buildkite/lm-eval-harness/run-lm-eval-gsm-vllm-baseline.sh -m RedHatAI/Qwen2.5-VL-3B-Instruct-FP8-Dynamic -l 1319 -t 1
 model_name: "RedHatAI/Qwen2.5-VL-3B-Instruct-FP8-Dynamic"
-required_gpu_arch:
-  - gfx942
-  - gfx950
 tasks:
 - name: "gsm8k"
   metrics:

.buildkite/lm-eval-harness/configs/Qwen3-235B-A22B-Instruct-2507-FP8.yaml

@@ -1,7 +1,4 @@
 model_name: "Qwen/Qwen3-235B-A22B-Instruct-2507-FP8"
-required_gpu_arch:
-  - gfx942
-  - gfx950
 tasks:
   - name: "mmlu_pro"
     metrics:

.buildkite/lm-eval-harness/configs/models-small-rocm.txt

@@ -1,6 +1,5 @@
 Qwen2.5-1.5B-Instruct.yaml
 Meta-Llama-3.2-1B-Instruct-INT8-compressed-tensors.yaml
-Meta-Llama-3-8B-Instruct-INT8-compressed-tensors-asym.yaml
 Meta-Llama-3-8B-Instruct-nonuniform-compressed-tensors.yaml
 Qwen2.5-VL-3B-Instruct-FP8-dynamic.yaml
 Qwen1.5-MoE-W4A16-compressed-tensors.yaml

.buildkite/lm-eval-harness/test_lm_eval_correctness.py

@@ -13,7 +13,6 @@ import os
 from contextlib import contextmanager
 
 import lm_eval
-import pytest
 import yaml
 
 from vllm.platforms import current_platform
@@ -90,40 +89,9 @@ def launch_lm_eval(eval_config, tp_size):
     return results
 
 
-def _check_rocm_gpu_arch_requirement(eval_config):
-    """Skip the test if the model requires a ROCm GPU arch not present.
-
-    Model YAML configs can specify::
-
-        required_gpu_arch:
-          - gfx942
-          - gfx950
-
-    The check only applies on ROCm.  On other platforms (e.g. CUDA) the
-    field is ignored so that shared config files work for both NVIDIA and
-    AMD CI pipelines.
-    """
-    required_archs = eval_config.get("required_gpu_arch")
-    if not required_archs:
-        return
-
-    if not current_platform.is_rocm():
-        return
-
-    from vllm.platforms.rocm import _GCN_ARCH  # noqa: E402
-
-    if not any(arch in _GCN_ARCH for arch in required_archs):
-        pytest.skip(
-            f"Model requires GPU arch {required_archs}, "
-            f"but detected arch is '{_GCN_ARCH}'"
-        )
-
-
 def test_lm_eval_correctness_param(config_filename, tp_size):
     eval_config = yaml.safe_load(config_filename.read_text(encoding="utf-8"))
 
-    _check_rocm_gpu_arch_requirement(eval_config)
-
     results = launch_lm_eval(eval_config, tp_size)
 
     rtol = eval_config.get("rtol", DEFAULT_RTOL)

.buildkite/release-pipeline.yaml

@@ -1,13 +1,3 @@
-# CUDA architecture lists — following PyTorch RELEASE.md
-# (https://github.com/pytorch/pytorch/blob/main/RELEASE.md)
-# SM86 included for broader Ampere coverage; SM89 for marlin fp8 support
-env:
-  CUDA_ARCH_X86: "7.5 8.0 8.6 8.9 9.0 10.0 12.0+PTX"
-  # aarch64 only architectures: 8.7 for Orin, 11.0 for Thor (since CUDA 13)
-  CUDA_ARCH_AARCH64: "8.0 8.7 8.9 9.0 10.0 11.0 12.0+PTX"
-  CUDA_ARCH_X86_CU129: "7.5 8.0 8.6 8.9 9.0 10.0 12.0"
-  CUDA_ARCH_AARCH64_CU129: "8.0 8.7 8.9 9.0 10.0 12.0"
-
 steps:
   - input: "Provide Release version here"
     id: input-release-version
@@ -24,7 +14,9 @@ steps:
         agents:
           queue: arm64_cpu_queue_release
         commands:
-          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=12.9.1 --build-arg torch_cuda_arch_list=\"${CUDA_ARCH_AARCH64_CU129}\" --tag vllm-ci:build-image --target build --progress plain -f docker/Dockerfile ."
+          # #NOTE: torch_cuda_arch_list is derived from upstream PyTorch build files here:
+          # https://github.com/pytorch/pytorch/blob/main/.ci/aarch64_linux/aarch64_ci_build.sh#L7
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=12.9.1 --build-arg torch_cuda_arch_list='8.7 8.9 9.0 10.0+PTX 12.0' --tag vllm-ci:build-image --target build --progress plain -f docker/Dockerfile ."
           - "mkdir artifacts"
           - "docker run --rm -v $(pwd)/artifacts:/artifacts_host vllm-ci:build-image bash -c 'cp -r dist /artifacts_host && chmod -R a+rw /artifacts_host'"
           - "bash .buildkite/scripts/upload-nightly-wheels.sh"
@@ -37,10 +29,12 @@ steps:
         agents:
           queue: arm64_cpu_queue_release
         commands:
-          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=13.0.2 --build-arg torch_cuda_arch_list=\"${CUDA_ARCH_AARCH64}\" --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.2-devel-ubuntu22.04  --tag vllm-ci:build-image --target build --progress plain -f docker/Dockerfile ."
+          # #NOTE: torch_cuda_arch_list is derived from upstream PyTorch build files here:
+          # https://github.com/pytorch/pytorch/blob/main/.ci/aarch64_linux/aarch64_ci_build.sh#L7
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=13.0.1 --build-arg torch_cuda_arch_list='8.7 8.9 9.0 10.0+PTX 12.0' --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.1-devel-ubuntu22.04  --tag vllm-ci:build-image --target build --progress plain -f docker/Dockerfile ."
           - "mkdir artifacts"
           - "docker run --rm -v $(pwd)/artifacts:/artifacts_host vllm-ci:build-image bash -c 'cp -r dist /artifacts_host && chmod -R a+rw /artifacts_host'"
-          - "bash .buildkite/scripts/upload-nightly-wheels.sh"
+          - "bash .buildkite/scripts/upload-nightly-wheels.sh manylinux_2_35"
         env:
           DOCKER_BUILDKIT: "1"
 
@@ -53,7 +47,7 @@ steps:
           - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg GIT_REPO_CHECK=1 --build-arg VLLM_BUILD_ACL=ON --tag vllm-ci:build-image --target vllm-build --progress plain -f docker/Dockerfile.cpu ."
           - "mkdir artifacts"
           - "docker run --rm -v $(pwd)/artifacts:/artifacts_host vllm-ci:build-image bash -c 'cp -r dist /artifacts_host && chmod -R a+rw /artifacts_host'"
-          - "bash .buildkite/scripts/upload-nightly-wheels.sh"
+          - "bash .buildkite/scripts/upload-nightly-wheels.sh manylinux_2_35"
         env:
           DOCKER_BUILDKIT: "1"
 
@@ -63,10 +57,10 @@ steps:
         agents:
           queue: cpu_queue_release
         commands:
-          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=12.9.1 --build-arg torch_cuda_arch_list=\"${CUDA_ARCH_X86_CU129}\" --tag vllm-ci:build-image --target build --progress plain -f docker/Dockerfile ."
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=12.9.1 --tag vllm-ci:build-image --target build --progress plain -f docker/Dockerfile ."
           - "mkdir artifacts"
           - "docker run --rm -v $(pwd)/artifacts:/artifacts_host vllm-ci:build-image bash -c 'cp -r dist /artifacts_host && chmod -R a+rw /artifacts_host'"
-          - "bash .buildkite/scripts/upload-nightly-wheels.sh"
+          - "bash .buildkite/scripts/upload-nightly-wheels.sh manylinux_2_31"
         env:
           DOCKER_BUILDKIT: "1"
 
@@ -76,10 +70,10 @@ steps:
         agents:
           queue: cpu_queue_release
         commands:
-          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=13.0.2 --build-arg torch_cuda_arch_list=\"${CUDA_ARCH_X86}\" --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.2-devel-ubuntu22.04 --tag vllm-ci:build-image --target build --progress plain -f docker/Dockerfile ."
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=13.0.1 --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.1-devel-ubuntu22.04 --tag vllm-ci:build-image --target build --progress plain -f docker/Dockerfile ."
           - "mkdir artifacts"
           - "docker run --rm -v $(pwd)/artifacts:/artifacts_host vllm-ci:build-image bash -c 'cp -r dist /artifacts_host && chmod -R a+rw /artifacts_host'"
-          - "bash .buildkite/scripts/upload-nightly-wheels.sh"
+          - "bash .buildkite/scripts/upload-nightly-wheels.sh manylinux_2_35"
         env:
           DOCKER_BUILDKIT: "1"
 
@@ -92,7 +86,7 @@ steps:
           - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg GIT_REPO_CHECK=1 --build-arg VLLM_CPU_X86=true --tag vllm-ci:build-image --target vllm-build --progress plain -f docker/Dockerfile.cpu ."
           - "mkdir artifacts"
           - "docker run --rm -v $(pwd)/artifacts:/artifacts_host vllm-ci:build-image bash -c 'cp -r dist /artifacts_host && chmod -R a+rw /artifacts_host'"
-          - "bash .buildkite/scripts/upload-nightly-wheels.sh"
+          - "bash .buildkite/scripts/upload-nightly-wheels.sh manylinux_2_35"
         env:
           DOCKER_BUILDKIT: "1"
 
@@ -104,205 +98,99 @@ steps:
     commands:
       - "bash .buildkite/scripts/generate-and-upload-nightly-index.sh"
 
-  - block: "Unblock to build release Docker images"
-    depends_on: ~
-    key: block-build-release-images
-    if: build.env("NIGHTLY") != "1"
-
   - group: "Build release Docker images"
     key: "build-release-images"
-    depends_on: block-build-release-images
-    allow_dependency_failure: true
     steps:
-      - label: "Build release image - x86_64 - CUDA 13.0"
+      - label: "Build release image - x86_64 - CUDA 12.9"
         depends_on: ~
         id: build-release-image-x86
         agents:
           queue: cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - |
-            DOCKER_BUILDKIT=1 docker build \
-              $(bash .buildkite/scripts/docker-build-metadata-args.sh) \
-              --build-arg max_jobs=16 \
-              --build-arg USE_SCCACHE=1 \
-              --build-arg GIT_REPO_CHECK=1 \
-              --build-arg CUDA_VERSION=13.0.2 \
-              --build-arg torch_cuda_arch_list="${CUDA_ARCH_X86}" \
-              --build-arg INSTALL_KV_CONNECTORS=true \
-              --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.2-devel-ubuntu22.04 \
-              --target vllm-openai \
-              --progress plain \
-              -f docker/Dockerfile .
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=12.9.1 --build-arg FLASHINFER_AOT_COMPILE=true --build-arg INSTALL_KV_CONNECTORS=true --tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m) --target vllm-openai --progress plain -f docker/Dockerfile ."
           - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)"
           # re-tag to default image tag and push, just in case arm64 build fails
           - "docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m) public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT"
           - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT"
 
-      - label: "Build release image - aarch64 - CUDA 13.0"
+      - label: "Build release image - aarch64 - CUDA 12.9"
         depends_on: ~
         id: build-release-image-arm64
         agents:
           queue: arm64_cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - |
-            DOCKER_BUILDKIT=1 docker build \
-              $(bash .buildkite/scripts/docker-build-metadata-args.sh) \
-              --build-arg max_jobs=16 \
-              --build-arg USE_SCCACHE=1 \
-              --build-arg GIT_REPO_CHECK=1 \
-              --build-arg CUDA_VERSION=13.0.2 \
-              --build-arg torch_cuda_arch_list="${CUDA_ARCH_AARCH64}" \
-              --build-arg INSTALL_KV_CONNECTORS=true \
-              --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.2-devel-ubuntu22.04 \
-              --target vllm-openai \
-              --progress plain \
-              -f docker/Dockerfile .
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=12.9.1 --build-arg FLASHINFER_AOT_COMPILE=true --build-arg torch_cuda_arch_list='8.7 8.9 9.0 10.0+PTX 12.0' --build-arg INSTALL_KV_CONNECTORS=true --tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m) --target vllm-openai --progress plain -f docker/Dockerfile ."
           - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)"
 
-      - label: "Build release image - x86_64 - CUDA 12.9"
+      - label: "Build release image - x86_64 - CUDA 13.0"
         depends_on: ~
-        id: build-release-image-x86-cuda-12-9
+        id: build-release-image-x86-cuda-13-0
         agents:
           queue: cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - |
-            DOCKER_BUILDKIT=1 docker build \
-              $(bash .buildkite/scripts/docker-build-metadata-args.sh cu129) \
-              --build-arg max_jobs=16 \
-              --build-arg USE_SCCACHE=1 \
-              --build-arg GIT_REPO_CHECK=1 \
-              --build-arg CUDA_VERSION=12.9.1 \
-              --build-arg torch_cuda_arch_list="${CUDA_ARCH_X86_CU129}" \
-              --build-arg INSTALL_KV_CONNECTORS=true \
-              --target vllm-openai \
-              --progress plain \
-              -f docker/Dockerfile .
-          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu129"
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=13.0.1 --build-arg INSTALL_KV_CONNECTORS=true --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.1-devel-ubuntu22.04 --tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130 --target vllm-openai --progress plain -f docker/Dockerfile ."
+          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130"
           # re-tag to default image tag and push, just in case arm64 build fails
-          - "docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu129 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu129"
-          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu129"
+          - "docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu130"
+          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu130"
 
-      - label: "Build release image - aarch64 - CUDA 12.9"
+      - label: "Build release image - aarch64 - CUDA 13.0"
         depends_on: ~
-        id: build-release-image-arm64-cuda-12-9
+        id: build-release-image-arm64-cuda-13-0
         agents:
           queue: arm64_cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - |
-            DOCKER_BUILDKIT=1 docker build \
-              $(bash .buildkite/scripts/docker-build-metadata-args.sh cu129) \
-              --build-arg max_jobs=16 \
-              --build-arg USE_SCCACHE=1 \
-              --build-arg GIT_REPO_CHECK=1 \
-              --build-arg CUDA_VERSION=12.9.1 \
-              --build-arg torch_cuda_arch_list="${CUDA_ARCH_AARCH64_CU129}" \
-              --build-arg INSTALL_KV_CONNECTORS=true \
-              --target vllm-openai \
-              --progress plain \
-              -f docker/Dockerfile .
-          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu129"
+          # compute capability 12.0 for RTX-50 series / RTX PRO 6000 Blackwell, 12.1 for DGX Spark
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=13.0.1 --build-arg torch_cuda_arch_list='8.7 8.9 9.0 10.0+PTX 12.0 12.1' --build-arg INSTALL_KV_CONNECTORS=true --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.1-devel-ubuntu22.04 --tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130 --target vllm-openai --progress plain -f docker/Dockerfile ."
+          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130"
 
-      - label: "Build release image - x86_64 - CUDA 13.0 - Ubuntu 24.04"
+      - label: "Build release image - x86_64 - CUDA 12.9 - Ubuntu 24.04"
         depends_on: ~
         id: build-release-image-x86-ubuntu2404
         agents:
           queue: cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - |
-            DOCKER_BUILDKIT=1 docker build \
-              $(bash .buildkite/scripts/docker-build-metadata-args.sh ubuntu2404) \
-              --build-arg max_jobs=16 \
-              --build-arg USE_SCCACHE=1 \
-              --build-arg GIT_REPO_CHECK=1 \
-              --build-arg CUDA_VERSION=13.0.2 \
-              --build-arg UBUNTU_VERSION=24.04 \
-              --build-arg GDRCOPY_OS_VERSION=Ubuntu24_04 \
-              --build-arg torch_cuda_arch_list="${CUDA_ARCH_X86}" \
-              --build-arg INSTALL_KV_CONNECTORS=true \
-              --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.2-devel-ubuntu24.04 \
-              --target vllm-openai \
-              --progress plain \
-              -f docker/Dockerfile .
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=12.9.1 --build-arg UBUNTU_VERSION=24.04 --build-arg GDRCOPY_OS_VERSION=Ubuntu24_04 --build-arg FLASHINFER_AOT_COMPILE=true --build-arg torch_cuda_arch_list='8.7 8.9 9.0 10.0+PTX 12.0' --build-arg INSTALL_KV_CONNECTORS=true --tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-ubuntu2404 --target vllm-openai --progress plain -f docker/Dockerfile ."
           - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-ubuntu2404"
           - "docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-ubuntu2404 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-ubuntu2404"
           - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-ubuntu2404"
 
-      - label: "Build release image - aarch64 - CUDA 13.0 - Ubuntu 24.04"
+      - label: "Build release image - aarch64 - CUDA 12.9 - Ubuntu 24.04"
         depends_on: ~
         id: build-release-image-arm64-ubuntu2404
         agents:
           queue: arm64_cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - |
-            DOCKER_BUILDKIT=1 docker build \
-              $(bash .buildkite/scripts/docker-build-metadata-args.sh ubuntu2404) \
-              --build-arg max_jobs=16 \
-              --build-arg USE_SCCACHE=1 \
-              --build-arg GIT_REPO_CHECK=1 \
-              --build-arg CUDA_VERSION=13.0.2 \
-              --build-arg UBUNTU_VERSION=24.04 \
-              --build-arg GDRCOPY_OS_VERSION=Ubuntu24_04 \
-              --build-arg torch_cuda_arch_list="${CUDA_ARCH_AARCH64}" \
-              --build-arg INSTALL_KV_CONNECTORS=true \
-              --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.2-devel-ubuntu24.04 \
-              --target vllm-openai \
-              --progress plain \
-              -f docker/Dockerfile .
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=12.9.1 --build-arg UBUNTU_VERSION=24.04 --build-arg GDRCOPY_OS_VERSION=Ubuntu24_04 --build-arg FLASHINFER_AOT_COMPILE=true --build-arg torch_cuda_arch_list='8.7 8.9 9.0 10.0+PTX 12.0' --build-arg INSTALL_KV_CONNECTORS=true --tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-ubuntu2404 --target vllm-openai --progress plain -f docker/Dockerfile ."
           - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-ubuntu2404"
 
-      - label: "Build release image - x86_64 - CUDA 12.9 - Ubuntu 24.04"
+      - label: "Build release image - x86_64 - CUDA 13.0 - Ubuntu 24.04"
         depends_on: ~
-        id: build-release-image-x86-cuda-12-9-ubuntu2404
+        id: build-release-image-x86-cuda-13-0-ubuntu2404
         agents:
           queue: cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - |
-            DOCKER_BUILDKIT=1 docker build \
-              $(bash .buildkite/scripts/docker-build-metadata-args.sh cu129-ubuntu2404) \
-              --build-arg max_jobs=16 \
-              --build-arg USE_SCCACHE=1 \
-              --build-arg GIT_REPO_CHECK=1 \
-              --build-arg CUDA_VERSION=12.9.1 \
-              --build-arg UBUNTU_VERSION=24.04 \
-              --build-arg GDRCOPY_OS_VERSION=Ubuntu24_04 \
-              --build-arg torch_cuda_arch_list="${CUDA_ARCH_X86_CU129}" \
-              --build-arg INSTALL_KV_CONNECTORS=true \
-              --target vllm-openai \
-              --progress plain \
-              -f docker/Dockerfile .
-          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu129-ubuntu2404"
-          - "docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu129-ubuntu2404 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu129-ubuntu2404"
-          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu129-ubuntu2404"
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=13.0.1 --build-arg UBUNTU_VERSION=24.04 --build-arg GDRCOPY_OS_VERSION=Ubuntu24_04 --build-arg FLASHINFER_AOT_COMPILE=true --build-arg torch_cuda_arch_list='8.7 8.9 9.0 10.0+PTX 12.0 12.1' --build-arg INSTALL_KV_CONNECTORS=true --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.1-devel-ubuntu24.04 --tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130-ubuntu2404 --target vllm-openai --progress plain -f docker/Dockerfile ."
+          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130-ubuntu2404"
+          - "docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130-ubuntu2404 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu130-ubuntu2404"
+          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu130-ubuntu2404"
 
-      - label: "Build release image - aarch64 - CUDA 12.9 - Ubuntu 24.04"
+      - label: "Build release image - aarch64 - CUDA 13.0 - Ubuntu 24.04"
         depends_on: ~
-        id: build-release-image-arm64-cuda-12-9-ubuntu2404
+        id: build-release-image-arm64-cuda-13-0-ubuntu2404
         agents:
           queue: arm64_cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - |
-            DOCKER_BUILDKIT=1 docker build \
-              $(bash .buildkite/scripts/docker-build-metadata-args.sh cu129-ubuntu2404) \
-              --build-arg max_jobs=16 \
-              --build-arg USE_SCCACHE=1 \
-              --build-arg GIT_REPO_CHECK=1 \
-              --build-arg CUDA_VERSION=12.9.1 \
-              --build-arg UBUNTU_VERSION=24.04 \
-              --build-arg GDRCOPY_OS_VERSION=Ubuntu24_04 \
-              --build-arg torch_cuda_arch_list="${CUDA_ARCH_AARCH64_CU129}" \
-              --build-arg INSTALL_KV_CONNECTORS=true \
-              --target vllm-openai \
-              --progress plain \
-              -f docker/Dockerfile .
-          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu129-ubuntu2404"
+          - "DOCKER_BUILDKIT=1 docker build --build-arg max_jobs=16 --build-arg USE_SCCACHE=1 --build-arg GIT_REPO_CHECK=1 --build-arg CUDA_VERSION=13.0.1 --build-arg UBUNTU_VERSION=24.04 --build-arg GDRCOPY_OS_VERSION=Ubuntu24_04 --build-arg FLASHINFER_AOT_COMPILE=true --build-arg torch_cuda_arch_list='8.7 8.9 9.0 10.0+PTX 12.0 12.1' --build-arg INSTALL_KV_CONNECTORS=true --build-arg BUILD_BASE_IMAGE=nvidia/cuda:13.0.1-devel-ubuntu24.04 --tag public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130-ubuntu2404 --target vllm-openai --progress plain -f docker/Dockerfile ."
+          - "docker push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-$(uname -m)-cu130-ubuntu2404"
 
       - block: "Build release image for x86_64 CPU"
         key: block-cpu-release-image-build
@@ -343,7 +231,7 @@ steps:
   - group: "Publish release images"
     key: "publish-release-images"
     steps:
-      - label: "Create multi-arch manifest - CUDA 13.0"
+      - label: "Create multi-arch manifest - CUDA 12.9"
         depends_on:
           - build-release-image-x86
           - build-release-image-arm64
@@ -355,7 +243,7 @@ steps:
           - "docker manifest create public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-x86_64 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-aarch64 --amend"
           - "docker manifest push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT"
 
-      - label: "Annotate release workflow - CUDA 13.0"
+      - label: "Annotate release workflow - CUDA 12.9"
         depends_on:
           - create-multi-arch-manifest
         id: annotate-release-workflow
@@ -364,19 +252,19 @@ steps:
         commands:
           - "bash .buildkite/scripts/annotate-release.sh"
 
-      - label: "Create multi-arch manifest - CUDA 12.9"
+      - label: "Create multi-arch manifest - CUDA 13.0"
         depends_on:
-          - build-release-image-x86-cuda-12-9
-          - build-release-image-arm64-cuda-12-9
-        id: create-multi-arch-manifest-cuda-12-9
+          - build-release-image-x86-cuda-13-0
+          - build-release-image-arm64-cuda-13-0
+        id: create-multi-arch-manifest-cuda-13-0
         agents:
           queue: small_cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - "docker manifest create public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu129 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-x86_64-cu129 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-aarch64-cu129 --amend"
-          - "docker manifest push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu129"
+          - "docker manifest create public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu130 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-x86_64-cu130 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-aarch64-cu130 --amend"
+          - "docker manifest push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu130"
 
-      - label: "Create multi-arch manifest - CUDA 13.0 - Ubuntu 24.04"
+      - label: "Create multi-arch manifest - CUDA 12.9 - Ubuntu 24.04"
         depends_on:
           - build-release-image-x86-ubuntu2404
           - build-release-image-arm64-ubuntu2404
@@ -388,17 +276,17 @@ steps:
           - "docker manifest create public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-ubuntu2404 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-x86_64-ubuntu2404 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-aarch64-ubuntu2404 --amend"
           - "docker manifest push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-ubuntu2404"
 
-      - label: "Create multi-arch manifest - CUDA 12.9 - Ubuntu 24.04"
+      - label: "Create multi-arch manifest - CUDA 13.0 - Ubuntu 24.04"
         depends_on:
-          - build-release-image-x86-cuda-12-9-ubuntu2404
-          - build-release-image-arm64-cuda-12-9-ubuntu2404
-        id: create-multi-arch-manifest-cuda-12-9-ubuntu2404
+          - build-release-image-x86-cuda-13-0-ubuntu2404
+          - build-release-image-arm64-cuda-13-0-ubuntu2404
+        id: create-multi-arch-manifest-cuda-13-0-ubuntu2404
         agents:
           queue: small_cpu_queue_release
         commands:
           - "aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws/q9t5s3a7"
-          - "docker manifest create public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu129-ubuntu2404 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-x86_64-cu129-ubuntu2404 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-aarch64-cu129-ubuntu2404 --amend"
-          - "docker manifest push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu129-ubuntu2404"
+          - "docker manifest create public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu130-ubuntu2404 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-x86_64-cu130-ubuntu2404 public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-aarch64-cu130-ubuntu2404 --amend"
+          - "docker manifest push public.ecr.aws/q9t5s3a7/vllm-release-repo:$BUILDKITE_COMMIT-cu130-ubuntu2404"
 
       - label: "Publish nightly multi-arch image to DockerHub"
         depends_on:
@@ -418,16 +306,16 @@ steps:
           DOCKER_BUILDKIT: "1"
           DOCKERHUB_USERNAME: "vllmbot"
 
-      - label: "Publish nightly multi-arch image to DockerHub - CUDA 12.9"
+      - label: "Publish nightly multi-arch image to DockerHub - CUDA 13.0"
         depends_on:
-          - create-multi-arch-manifest-cuda-12-9
+          - create-multi-arch-manifest-cuda-13-0
         if: build.env("NIGHTLY") == "1"
         agents:
           queue: small_cpu_queue_release
         commands:
-          - "bash .buildkite/scripts/push-nightly-builds.sh cu129"
+          - "bash .buildkite/scripts/push-nightly-builds.sh cu130"
           # Clean up old nightly builds (keep only last 14)
-          - "bash .buildkite/scripts/cleanup-nightly-builds.sh cu129-nightly-"
+          - "bash .buildkite/scripts/cleanup-nightly-builds.sh cu130-nightly-"
         plugins:
           - docker-login#v3.0.0:
               username: vllmbot
@@ -729,8 +617,6 @@ steps:
   - label: ":docker: Build release image - x86_64 - ROCm"
     id: build-rocm-release-image
     depends_on:
-      - step: block-build-release-images
-        allow_failure: true
       - step: build-rocm-base-wheels
         allow_failure: false
     agents:

.buildkite/scripts/annotate-release.sh

@@ -13,12 +13,12 @@ ROCM_BASE_CACHE_KEY=$(.buildkite/scripts/cache-rocm-base-wheels.sh key)
 buildkite-agent annotate --style 'info' --context 'release-workflow' << EOF
 To download the wheel (by commit):
 \`\`\`
-aws s3 cp s3://vllm-wheels/${BUILDKITE_COMMIT}/vllm-${RELEASE_VERSION}-cp38-abi3-manylinux_2_35_x86_64.whl .
-aws s3 cp s3://vllm-wheels/${BUILDKITE_COMMIT}/vllm-${RELEASE_VERSION}-cp38-abi3-manylinux_2_35_aarch64.whl .
+aws s3 cp s3://vllm-wheels/${BUILDKITE_COMMIT}/vllm-${RELEASE_VERSION}-cp38-abi3-manylinux_2_31_x86_64.whl .
+aws s3 cp s3://vllm-wheels/${BUILDKITE_COMMIT}/vllm-${RELEASE_VERSION}-cp38-abi3-manylinux_2_31_aarch64.whl .
 
-(Optional) For CUDA 12.9:
-aws s3 cp s3://vllm-wheels/${BUILDKITE_COMMIT}/vllm-${RELEASE_VERSION}+cu129-cp38-abi3-manylinux_2_31_x86_64.whl .
-aws s3 cp s3://vllm-wheels/${BUILDKITE_COMMIT}/vllm-${RELEASE_VERSION}+cu129-cp38-abi3-manylinux_2_31_aarch64.whl .
+(Optional) For CUDA 13.0:
+aws s3 cp s3://vllm-wheels/${BUILDKITE_COMMIT}/vllm-${RELEASE_VERSION}+cu130-cp38-abi3-manylinux_2_35_x86_64.whl .
+aws s3 cp s3://vllm-wheels/${BUILDKITE_COMMIT}/vllm-${RELEASE_VERSION}+cu130-cp38-abi3-manylinux_2_35_aarch64.whl .
 
 (Optional) For CPU:
 aws s3 cp s3://vllm-wheels/${BUILDKITE_COMMIT}/vllm-${RELEASE_VERSION}+cpu-cp38-abi3-manylinux_2_35_x86_64.whl .
@@ -33,8 +33,8 @@ To download and upload the image:
 
 docker pull public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-x86_64
 docker pull public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-aarch64
-docker pull public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-x86_64-cu129
-docker pull public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-aarch64-cu129
+docker pull public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-x86_64-cu130
+docker pull public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-aarch64-cu130
 docker pull public.ecr.aws/q9t5s3a7/vllm-release-repo:${ROCM_BASE_CACHE_KEY}-rocm-base
 docker pull public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-rocm
 docker pull public.ecr.aws/q9t5s3a7/vllm-cpu-release-repo:v${RELEASE_VERSION}
@@ -50,11 +50,11 @@ docker tag vllm/vllm-openai:x86_64 vllm/vllm-openai:v${RELEASE_VERSION}-x86_64
 docker push vllm/vllm-openai:latest-x86_64
 docker push vllm/vllm-openai:v${RELEASE_VERSION}-x86_64
 
-docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-x86_64-cu129 vllm/vllm-openai:x86_64-cu129
-docker tag vllm/vllm-openai:x86_64-cu129 vllm/vllm-openai:latest-x86_64-cu129
-docker tag vllm/vllm-openai:x86_64-cu129 vllm/vllm-openai:v${RELEASE_VERSION}-x86_64-cu129
-docker push vllm/vllm-openai:latest-x86_64-cu129
-docker push vllm/vllm-openai:v${RELEASE_VERSION}-x86_64-cu129
+docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-x86_64-cu130 vllm/vllm-openai:x86_64-cu130
+docker tag vllm/vllm-openai:x86_64-cu130 vllm/vllm-openai:latest-x86_64-cu130
+docker tag vllm/vllm-openai:x86_64-cu130 vllm/vllm-openai:v${RELEASE_VERSION}-x86_64-cu130
+docker push vllm/vllm-openai:latest-x86_64-cu130
+docker push vllm/vllm-openai:v${RELEASE_VERSION}-x86_64-cu130
 
 docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-aarch64 vllm/vllm-openai:aarch64
 docker tag vllm/vllm-openai:aarch64 vllm/vllm-openai:latest-aarch64
@@ -62,11 +62,11 @@ docker tag vllm/vllm-openai:aarch64 vllm/vllm-openai:v${RELEASE_VERSION}-aarch64
 docker push vllm/vllm-openai:latest-aarch64
 docker push vllm/vllm-openai:v${RELEASE_VERSION}-aarch64
 
-docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-aarch64-cu129 vllm/vllm-openai:aarch64-cu129
-docker tag vllm/vllm-openai:aarch64-cu129 vllm/vllm-openai:latest-aarch64-cu129
-docker tag vllm/vllm-openai:aarch64-cu129 vllm/vllm-openai:v${RELEASE_VERSION}-aarch64-cu129
-docker push vllm/vllm-openai:latest-aarch64-cu129
-docker push vllm/vllm-openai:v${RELEASE_VERSION}-aarch64-cu129
+docker tag public.ecr.aws/q9t5s3a7/vllm-release-repo:${BUILDKITE_COMMIT}-aarch64-cu130 vllm/vllm-openai:aarch64-cu130
+docker tag vllm/vllm-openai:aarch64-cu130 vllm/vllm-openai:latest-aarch64-cu130
+docker tag vllm/vllm-openai:aarch64-cu130 vllm/vllm-openai:v${RELEASE_VERSION}-aarch64-cu130
+docker push vllm/vllm-openai:latest-aarch64-cu130
+docker push vllm/vllm-openai:v${RELEASE_VERSION}-aarch64-cu130
 
 ## ROCm
 
@@ -104,11 +104,11 @@ docker manifest create vllm/vllm-openai:v${RELEASE_VERSION} vllm/vllm-openai:v${
 docker manifest push vllm/vllm-openai:latest
 docker manifest push vllm/vllm-openai:v${RELEASE_VERSION}
 
-docker manifest rm vllm/vllm-openai:latest-cu129
-docker manifest create vllm/vllm-openai:latest-cu129 vllm/vllm-openai:latest-x86_64-cu129 vllm/vllm-openai:latest-aarch64-cu129
-docker manifest create vllm/vllm-openai:v${RELEASE_VERSION}-cu129 vllm/vllm-openai:v${RELEASE_VERSION}-x86_64-cu129 vllm/vllm-openai:v${RELEASE_VERSION}-aarch64-cu129
-docker manifest push vllm/vllm-openai:latest-cu129
-docker manifest push vllm/vllm-openai:v${RELEASE_VERSION}-cu129
+docker manifest rm vllm/vllm-openai:latest-cu130
+docker manifest create vllm/vllm-openai:latest-cu130 vllm/vllm-openai:latest-x86_64-cu130 vllm/vllm-openai:latest-aarch64-cu130
+docker manifest create vllm/vllm-openai:v${RELEASE_VERSION}-cu130 vllm/vllm-openai:v${RELEASE_VERSION}-x86_64-cu130 vllm/vllm-openai:v${RELEASE_VERSION}-aarch64-cu130
+docker manifest push vllm/vllm-openai:latest-cu130
+docker manifest push vllm/vllm-openai:v${RELEASE_VERSION}-cu130
 
 docker manifest rm vllm/vllm-openai-cpu:latest || true
 docker manifest create vllm/vllm-openai-cpu:latest vllm/vllm-openai-cpu:latest-x86_64 vllm/vllm-openai-cpu:latest-arm64

.buildkite/scripts/check-ray-compatibility.sh

@@ -29,7 +29,7 @@ if python3 -c "import torch; assert torch.version.hip" 2>/dev/null; then
         TORCH_INDEX_URL=""
     fi
 else
-    TORCH_INDEX_URL="https://download.pytorch.org/whl/cu130"
+    TORCH_INDEX_URL="https://download.pytorch.org/whl/cu129"
 fi
 echo ">>> Using PyTorch index: ${TORCH_INDEX_URL:-PyPI default}"
 

.buildkite/scripts/detect-manylinux-tag.py

@@ -1,142 +0,0 @@
-#!/usr/bin/env python3
-# SPDX-License-Identifier: Apache-2.0
-# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
-"""Detect the manylinux platform tag for a wheel and rename it in place.
-
-vLLM's build images produce wheels with the generic ``linux_<arch>`` platform
-tag, which installers like ``pip`` won't accept off PyPI/our index. We need to
-rewrite the platform tag to the appropriate ``manylinux_<major>_<minor>_<arch>``
-before uploading.
-
-Historically the tag was hard-coded per build (``manylinux_2_31`` for the
-Ubuntu 20.04-based image, ``manylinux_2_35`` for the Ubuntu 22.04-based
-images). That is brittle: bumping the base image silently produces wheels
-labelled with the wrong glibc requirement. This script asks ``auditwheel``
-to derive the tag from the symbol versions actually referenced by the
-binaries inside the wheel, so the label tracks reality.
-
-We can't simply call ``auditwheel repair`` -- it tries to graft external
-shared libraries into the wheel and fails on vLLM's CUDA/cuBLAS dependencies.
-Instead we use ``auditwheel.wheel_abi.analyze_wheel_abi`` directly, which is
-the same call that powers ``auditwheel show``, and read off
-``winfo.sym_policy.name``.
-
-Usage:
-    detect-manylinux-tag.py <wheel_path>
-
-The wheel is renamed in place; the new path is printed on stdout. All
-diagnostics go to stderr so callers can capture stdout safely.
-"""
-
-from __future__ import annotations
-
-import argparse
-import sys
-from pathlib import Path
-
-from auditwheel.error import (
-    AuditwheelError,
-    NonPlatformWheelError,
-    WheelToolsError,
-)
-from auditwheel.wheel_abi import analyze_wheel_abi
-from auditwheel.wheeltools import get_wheel_architecture, get_wheel_libc
-
-
-def detect_platform_tag(wheel_path: Path) -> str:
-    """Return the most precise platform tag the wheel is consistent with.
-
-    Mirrors ``auditwheel show`` but returns ``sym_policy`` rather than
-    ``overall_policy``: we only care about the glibc symbol versions used,
-    not about other policy axes (ISA extensions, blacklist, etc.) that
-    ``overall_policy`` folds in.
-    """
-    fn = wheel_path.name
-
-    try:
-        arch = get_wheel_architecture(fn)
-    except (WheelToolsError, NonPlatformWheelError):
-        # Architecture isn't deducible from the filename; let auditwheel
-        # infer it from the ELF binaries inside the wheel.
-        arch = None
-
-    try:
-        libc = get_wheel_libc(fn)
-    except WheelToolsError:
-        # An unrepaired wheel uses ``linux_<arch>``, which doesn't encode
-        # libc. Let auditwheel infer it from the ELF binaries.
-        libc = None
-
-    winfo = analyze_wheel_abi(
-        libc,
-        arch,
-        wheel_path,
-        frozenset(),
-        disable_isa_ext_check=False,
-        allow_graft=False,
-    )
-    return winfo.sym_policy.name
-
-
-def rename_wheel(wheel_path: Path, new_platform_tag: str) -> Path:
-    """Rename the wheel in place, replacing only its platform tag."""
-    # Wheel filename per PEP 427:
-    #   {distribution}-{version}(-{build})?-{python}-{abi}-{platform}.whl
-    # The platform tag is always the last ``-``-separated token before
-    # ``.whl``. Compound tags like ``manylinux_2_31_x86_64`` use ``_`` as the
-    # internal separator, so ``-``-splitting is unambiguous.
-    parts = wheel_path.stem.split("-")
-    if len(parts) < 5:
-        raise ValueError(f"Unrecognised wheel filename: {wheel_path.name}")
-    parts[-1] = new_platform_tag
-    new_path = wheel_path.with_name("-".join(parts) + ".whl")
-    if new_path != wheel_path:
-        wheel_path.rename(new_path)
-    return new_path
-
-
-def main() -> int:
-    parser = argparse.ArgumentParser(
-        description="Detect a wheel's manylinux platform tag with "
-        "auditwheel and rename the wheel in place."
-    )
-    parser.add_argument(
-        "wheel",
-        type=Path,
-        help="Path to the wheel to inspect and rename.",
-    )
-    args = parser.parse_args()
-
-    wheel_path: Path = args.wheel
-    if not wheel_path.is_file():
-        print(f"error: {wheel_path} is not a file", file=sys.stderr)
-        return 1
-
-    # Catch the things that ``analyze_wheel_abi`` and ``rename_wheel`` can
-    # raise: any subclass of ``AuditwheelError`` (pure-Python wheels,
-    # invalid libc, malformed wheels), filesystem errors, or our own
-    # ``ValueError`` for an unrecognised wheel filename. Print a single
-    # ``ERROR_TYPE: message`` line to stderr instead of a Python
-    # traceback, which is much friendlier in CI logs.
-    try:
-        new_tag = detect_platform_tag(wheel_path)
-        print(f"detected platform tag: {new_tag}", file=sys.stderr)
-        new_path = rename_wheel(wheel_path, new_tag)
-    except (AuditwheelError, ValueError, OSError) as e:
-        print(
-            f"error: failed to retag {wheel_path.name}: {type(e).__name__}: {e}",
-            file=sys.stderr,
-        )
-        return 2
-
-    if new_path != wheel_path:
-        print(f"renamed {wheel_path.name} -> {new_path.name}", file=sys.stderr)
-    else:
-        print(f"wheel already tagged {new_tag}", file=sys.stderr)
-
-    print(new_path)
-    return 0
-
-
-if __name__ == "__main__":
-    sys.exit(main())

.buildkite/scripts/docker-build-metadata-args.sh

@@ -1,54 +0,0 @@
-#!/bin/bash
-# Emit docker build flags for release image provenance metadata.
-# Keep this helper best-effort: missing Buildkite metadata should fall back to
-# local/default values instead of blocking the Docker build.
-
-# Variant examples: "", "cu129", "ubuntu2404", "cu129-ubuntu2404".
-variant="${1:-}"
-variant_suffix="${variant:+-${variant}}"
-
-image_name="${VLLM_DOCKER_IMAGE_NAME:-vllm/vllm-openai}"
-staging_repo="${VLLM_STAGING_IMAGE_REPO:-public.ecr.aws/q9t5s3a7/vllm-release-repo}"
-build_commit="${VLLM_BUILD_COMMIT:-${BUILDKITE_COMMIT:-unknown}}"
-build_pipeline="${VLLM_BUILD_PIPELINE:-${BUILDKITE_PIPELINE_ID:-${BUILDKITE_PIPELINE_SLUG:-local}}}"
-build_url="${VLLM_BUILD_URL:-${BUILDKITE_BUILD_URL:-}}"
-tag_commit="${BUILDKITE_COMMIT:-${build_commit}}"
-
-if [[ -n "${BUILDKITE:-}" || -n "${BUILDKITE_COMMIT:-}" ]]; then
-  release_version="${RELEASE_VERSION:-}"
-  if command -v buildkite-agent >/dev/null 2>&1; then
-    release_version="${release_version:-$(buildkite-agent meta-data get release-version 2>/dev/null)}"
-  fi
-  release_version="${release_version#v}"
-  release_version="${release_version:-${tag_commit}}"
-
-  staging_image_ref="${staging_repo}:${tag_commit}-$(uname -m)${variant_suffix}"
-
-  if [[ "${NIGHTLY:-}" == "1" ]]; then
-    if [[ -z "${variant}" ]]; then
-      image_tag="${image_name}:nightly-${tag_commit}"
-    elif [[ "${variant}" == cu* ]]; then
-      cuda_variant="${variant%%-*}"
-      remaining_variant="${variant#${cuda_variant}}"
-      image_tag="${image_name}:${cuda_variant}-nightly-${tag_commit}${remaining_variant}"
-    else
-      image_tag="${image_name}:nightly-${tag_commit}${variant_suffix}"
-    fi
-  else
-    image_tag="${image_name}:v${release_version}${variant_suffix}"
-  fi
-else
-  image_tag="${VLLM_IMAGE_TAG:-local/vllm-openai:dev}"
-  staging_image_ref="${image_tag}"
-fi
-
-emit_arg() {
-  printf -- "--build-arg %s=%s " "$1" "$2"
-}
-
-emit_arg VLLM_BUILD_COMMIT "${build_commit}"
-emit_arg VLLM_BUILD_PIPELINE "${build_pipeline}"
-emit_arg VLLM_BUILD_URL "${build_url}"
-# This is the intended public tag. The final digest is only known after push.
-emit_arg VLLM_IMAGE_TAG "${image_tag}"
-printf -- "--tag %s " "${staging_image_ref}"

.buildkite/scripts/generate-and-upload-nightly-index.sh

@@ -9,14 +9,21 @@ set -ex
 
 BUCKET="vllm-wheels"
 INDICES_OUTPUT_DIR="indices"
-DEFAULT_VARIANT_ALIAS="cu130" # align with vLLM_MAIN_CUDA_VERSION in vllm/envs.py
+DEFAULT_VARIANT_ALIAS="cu129" # align with vLLM_MAIN_CUDA_VERSION in vllm/envs.py
+PYTHON="${PYTHON_PROG:-python3}" # try to read from env var, otherwise use python3
 SUBPATH=$BUILDKITE_COMMIT
 S3_COMMIT_PREFIX="s3://$BUCKET/$SUBPATH/"
 
-# Select python3 (>= 3.12) -- local if available, else a docker fallback.
-# shellcheck source=lib/select-python.sh
-source .buildkite/scripts/lib/select-python.sh
-select_python
+# detect if python3.12+ is available
+has_new_python=$($PYTHON -c "print(1 if __import__('sys').version_info >= (3,12) else 0)")
+if [[ "$has_new_python" -eq 0 ]]; then
+    # use new python from docker
+    docker pull python:3-slim
+    PYTHON="docker run --rm -v $(pwd):/app -w /app python:3-slim python3"
+fi
+
+echo "Using python interpreter: $PYTHON"
+echo "Python version: $($PYTHON --version)"
 
 # ======== generate and upload indices ========
 

.buildkite/scripts/hardware_ci/run-amd-test.sh

@@ -35,6 +35,23 @@ export PYTHONPATH=".."
 # Helper Functions
 ###############################################################################
 
+wait_for_clean_gpus() {
+  local timeout=${1:-300}
+  local start=$SECONDS
+  echo "--- Waiting for clean GPU state (timeout: ${timeout}s)"
+  while true; do
+    if grep -q clean /opt/amdgpu/etc/gpu_state; then
+      echo "GPUs state is \"clean\""
+      return
+    fi
+    if (( SECONDS - start >= timeout )); then
+      echo "Error: GPUs did not reach clean state within ${timeout}s" >&2
+      exit 1
+    fi
+    sleep 3
+  done
+}
+
 cleanup_docker() {
   # Get Docker's root directory
   docker_root=$(docker info -f '{{.DockerRootDir}}')
@@ -348,12 +365,19 @@ apply_rocm_test_overrides() {
 ###############################################################################
 
 # --- GPU initialization ---
+echo "--- Confirming Clean Initial State"
+wait_for_clean_gpus
+
 echo "--- ROCm info"
 rocminfo
 
 # --- Docker housekeeping ---
 cleanup_docker
 
+echo "--- Resetting GPUs"
+echo "reset" > /opt/amdgpu/etc/gpu_state
+wait_for_clean_gpus
+
 # --- Pull test image ---
 echo "--- Pulling container"
 image_name="rocm/vllm-ci:${BUILDKITE_COMMIT}"

.buildkite/scripts/hardware_ci/run-cpu-distributed-smoke-test.sh

@@ -3,37 +3,42 @@ set -euox pipefail
 export VLLM_CPU_CI_ENV=0
 export VLLM_CPU_KVCACHE_SPACE=1 # avoid OOM
 
-MODE=${1:-all}
+echo "--- PP+TP"
+vllm serve meta-llama/Llama-3.2-3B-Instruct -tp=2 -pp=2 --max-model-len=4096 &
+server_pid=$!
+timeout 600 bash -c "until curl localhost:8000/v1/models > /dev/null 2>&1; do sleep 1; done" || exit 1
+vllm bench serve \
+    --backend vllm \
+    --dataset-name random \
+    --model meta-llama/Llama-3.2-3B-Instruct \
+    --num-prompts 20 \
+    --result-dir ./test_results \
+    --result-filename tp_pp.json \
+    --save-result \
+    --endpoint /v1/completions
+kill -s SIGTERM $server_pid; wait $server_pid || true
+failed_req=$(jq '.failed' ./test_results/tp_pp.json)
+if [ "$failed_req" -ne 0 ]; then
+  echo "Some requests were failed!"
+  exit 1
+fi
 
-run_scenario() {
-    local label="$1" result_file="$2"
-    shift 2
-    echo "--- $label"
-    vllm serve meta-llama/Llama-3.2-3B-Instruct "$@" --max-model-len=4096 &
-    local server_pid=$!
-    timeout 600 bash -c "until curl localhost:8000/v1/models > /dev/null 2>&1; do sleep 1; done" || exit 1
-    vllm bench serve \
-        --backend vllm \
-        --dataset-name random \
-        --model meta-llama/Llama-3.2-3B-Instruct \
-        --num-prompts 20 \
-        --result-dir ./test_results \
-        --result-filename "$result_file" \
-        --save-result \
-        --endpoint /v1/completions
-    kill -s SIGTERM "$server_pid"; wait "$server_pid" || true
-    if [ "$(jq '.failed' "./test_results/$result_file")" -ne 0 ]; then
-        echo "Some requests were failed in $label!"
-        exit 1
-    fi
-}
-
-case "$MODE" in
-    tp_pp) run_scenario "PP+TP" tp_pp.json -tp=2 -pp=2 ;;
-    dp_tp) run_scenario "DP+TP" dp_tp.json -tp=2 -dp=2 ;;
-    all)
-        run_scenario "PP+TP" tp_pp.json -tp=2 -pp=2
-        run_scenario "DP+TP" dp_tp.json -tp=2 -dp=2
-        ;;
-    *) echo "ERROR: unknown mode '$MODE' (expected: tp_pp | dp_tp | all)" >&2; exit 1 ;;
-esac
+echo "--- DP+TP"
+vllm serve meta-llama/Llama-3.2-3B-Instruct -tp=2 -dp=2 --max-model-len=4096 &
+server_pid=$!
+timeout 600 bash -c "until curl localhost:8000/v1/models > /dev/null 2>&1; do sleep 1; done" || exit 1
+vllm bench serve \
+    --backend vllm \
+    --dataset-name random \
+    --model meta-llama/Llama-3.2-3B-Instruct \
+    --num-prompts 20 \
+    --result-dir ./test_results \
+    --result-filename dp_pp.json \
+    --save-result \
+    --endpoint /v1/completions
+kill -s SIGTERM $server_pid; wait $server_pid || true
+failed_req=$(jq '.failed' ./test_results/dp_pp.json)
+if [ "$failed_req" -ne 0 ]; then
+  echo "Some requests were failed!"
+  exit 1
+fi

.buildkite/scripts/hardware_ci/run-cpu-test-arm.sh

@@ -51,7 +51,6 @@ function cpu_tests() {
     set -e
     pytest -x -v -s tests/kernels/test_onednn.py
     pytest -x -v -s tests/kernels/attention/test_cpu_attn.py
-    pytest -x -v -s tests/kernels/core/test_cpu_activation.py
     pytest -x -v -s tests/kernels/moe/test_moe.py -k test_cpu_fused_moe_basic"
 
   # basic online serving

.buildkite/scripts/hardware_ci/run-cpu-test.sh

@@ -16,5 +16,5 @@ echo "--- :docker: Building Docker image"
 docker build --progress plain --tag "$IMAGE_NAME" --target vllm-test -f docker/Dockerfile.cpu .
 
 # Run the image, setting --shm-size=4g for tensor parallel.
-docker run --rm --cpuset-cpus="$CORE_RANGE" --cpuset-mems="$NUMA_NODE" -v ~/.cache/huggingface:/root/.cache/huggingface --privileged=true -e HF_TOKEN -e VLLM_CPU_KVCACHE_SPACE=16 -e VLLM_CPU_CI_ENV=1 -e VLLM_CPU_SIM_MULTI_NUMA=1 -e VLLM_CPU_ATTN_SPLIT_KV=0 --shm-size=4g "$IMAGE_NAME" \
+docker run --rm --cpuset-cpus="$CORE_RANGE" --cpuset-mems="$NUMA_NODE" -v ~/.cache/huggingface:/root/.cache/huggingface --privileged=true -e HF_TOKEN -e VLLM_CPU_KVCACHE_SPACE=16 -e VLLM_CPU_CI_ENV=1 -e VLLM_CPU_SIM_MULTI_NUMA=1 --shm-size=4g "$IMAGE_NAME" \
         timeout "$TIMEOUT_VAL" bash -c "set -euox pipefail; echo \"--- Print packages\"; pip list; echo \"--- Running tests\"; ${TEST_COMMAND}"

.buildkite/scripts/hardware_ci/run-hpu-test.sh

@@ -42,7 +42,7 @@ WORKDIR /workspace/vllm
 ENV no_proxy=localhost,127.0.0.1
 ENV PT_HPU_ENABLE_LAZY_COLLECTIVES=true
 
-RUN bash -c 'pip install -r <(sed "/^torch/d" requirements/build/cuda.txt)'
+RUN bash -c 'pip install -r <(sed "/^torch/d" requirements/build.txt)'
 RUN VLLM_TARGET_DEVICE=empty pip install --no-build-isolation -e .
 RUN pip install git+https://github.com/vllm-project/vllm-gaudi.git
 

.buildkite/scripts/hardware_ci/run-intel-test.sh

@@ -25,100 +25,22 @@ export PYTHONPATH=".."
 ###############################################################################
 
 cleanup_docker() {
-  # Share the same lock with image pull to avoid cleanup/pull races on one node.
-  local docker_lock="/tmp/docker-pull.lock"
-  exec 9>"$docker_lock"
-  flock 9
-
   docker_root=$(docker info -f '{{.DockerRootDir}}')
   if [ -z "$docker_root" ]; then
     echo "Failed to determine Docker root directory." >&2
-    flock -u 9
-    return 1
+    exit 1
   fi
   echo "Docker root directory: $docker_root"
 
   disk_usage=$(df "$docker_root" | tail -1 | awk '{print $5}' | sed 's/%//')
   threshold=70
   if [ "$disk_usage" -gt "$threshold" ]; then
-    echo "Disk usage is above $threshold%. Running aggressive CI image cleanup..."
-    cleanup_old_ci_images "${REGISTRY}/${REPO}" "${image_name}" "${DOCKER_IMAGE_CLEANUP_HOURS:-72}" 1
+    echo "Disk usage is above $threshold%. Cleaning up Docker images and volumes..."
+    docker image prune -f
+    docker volume prune -f && docker system prune --force --filter "until=72h" --all
+    echo "Docker images and volumes cleanup completed."
   else
-    echo "Disk usage is below $threshold%. Checking old CI images anyway."
-    cleanup_old_ci_images "${REGISTRY}/${REPO}" "${image_name}" "${DOCKER_IMAGE_CLEANUP_HOURS:-72}" 0
-  fi
-  echo "Old CI image cleanup completed."
-
-  flock -u 9
-}
-
-cleanup_old_ci_images() {
-  local repo_prefix="$1"
-  local current_image_ref="$2"
-  local ttl_hours="$3"
-  local aggressive_cleanup="$4"
-
-  if [[ -z "$repo_prefix" || "$repo_prefix" == "/" ]]; then
-    echo "Skip old-image cleanup: invalid repo prefix '${repo_prefix}'"
-    return 0
-  fi
-
-  if ! [[ "$ttl_hours" =~ ^[0-9]+$ ]]; then
-    echo "Invalid DOCKER_IMAGE_CLEANUP_HOURS='${ttl_hours}', fallback to 72"
-    ttl_hours=72
-  fi
-
-  local now_epoch cutoff_epoch
-  now_epoch=$(date +%s)
-  cutoff_epoch=$((now_epoch - ttl_hours * 3600))
-
-  local -a used_image_ids
-  mapfile -t used_image_ids < <(docker ps -aq | xargs -r docker inspect --format '{{.Image}}' | sort -u)
-
-  local removed_count=0
-  local examined_count=0
-  declare -A seen_ids=()
-
-  while read -r image_ref image_id; do
-    [[ -z "$image_ref" || -z "$image_id" ]] && continue
-    ((examined_count++))
-
-    # Keep the image this job is going to use.
-    if [[ "$image_ref" == "$current_image_ref" ]]; then
-      continue
-    fi
-
-    # Avoid duplicate deletes when multiple tags point to same image id.
-    if [[ -n "${seen_ids[$image_id]:-}" ]]; then
-      continue
-    fi
-    seen_ids[$image_id]=1
-
-    # Never delete images that are used by any container on this node.
-    if printf '%s\n' "${used_image_ids[@]}" | grep -qx "$image_id"; then
-      continue
-    fi
-
-    local created created_epoch
-    created=$(docker image inspect -f '{{.Created}}' "$image_id" 2>/dev/null || true)
-    [[ -z "$created" ]] && continue
-    created_epoch=$(date -d "$created" +%s 2>/dev/null || true)
-    [[ -z "$created_epoch" ]] && continue
-
-    if (( created_epoch < cutoff_epoch )) || [[ "$aggressive_cleanup" == "1" ]]; then
-      if docker image rm -f "$image_id" >/dev/null 2>&1; then
-        ((removed_count++))
-      fi
-    fi
-  done < <(docker image ls --no-trunc "$repo_prefix" --format '{{.Repository}}:{{.Tag}} {{.ID}}')
-
-  # Also trim old dangling layers; this is safe and does not remove referenced images.
-  docker image prune -f --filter "until=${ttl_hours}h" >/dev/null 2>&1 || true
-
-  if [[ "$aggressive_cleanup" == "1" ]]; then
-    echo "Examined ${examined_count} images under ${repo_prefix}, removed ${removed_count} unused images under disk pressure."
-  else
-    echo "Examined ${examined_count} images under ${repo_prefix}, removed ${removed_count} old images (>${ttl_hours}h)."
+    echo "Disk usage is below $threshold%. No cleanup needed."
   fi
 }
 
@@ -318,6 +240,7 @@ fi
 cleanup_docker
 
 aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin "$REGISTRY"
+aws ecr get-login-password --region us-east-1 | docker login --username AWS --password-stdin 936637512419.dkr.ecr.us-east-1.amazonaws.com
 
 # --- Build or pull test image ---
 IMAGE="${IMAGE_TAG_XPU:-${image_name}}"
@@ -343,6 +266,8 @@ fi
 
 remove_docker_container() {
   docker rm -f "${container_name}" || true
+  docker image rm -f "${image_name}" || true
+  docker system prune -f || true
 }
 trap remove_docker_container EXIT
 
@@ -358,7 +283,6 @@ docker run \
     --ipc=host \
     --privileged \
     -v /dev/dri/by-path:/dev/dri/by-path \
-    -v ${HOME}/.cache/huggingface:/root/.cache/huggingface \
     --entrypoint="" \
     -e "HF_TOKEN=${HF_TOKEN:-}" \
     -e "ZE_AFFINITY_MASK=${ZE_AFFINITY_MASK:-}" \

.buildkite/scripts/hardware_ci/run-xpu-test.sh

@@ -12,7 +12,9 @@ docker build -t "${image_name}" -f docker/Dockerfile.xpu .
 
 # Setup cleanup
 remove_docker_container() {
-  docker rm -f "${container_name}" || true
+  docker rm -f "${container_name}" || true;
+  docker image rm -f "${image_name}" || true;
+  docker system prune -f || true;
 }
 trap remove_docker_container EXIT
 
@@ -48,6 +50,6 @@ docker run \
     pytest -v -s v1/worker --ignore=v1/worker/test_gpu_model_runner.py --ignore=v1/worker/test_worker_memory_snapshot.py
     pytest -v -s v1/structured_output
     pytest -v -s v1/spec_decode --ignore=v1/spec_decode/test_max_len.py --ignore=v1/spec_decode/test_tree_attention.py --ignore=v1/spec_decode/test_speculators_eagle3.py --ignore=v1/spec_decode/test_acceptance_length.py
-    pytest -v -s v1/kv_connector/unit --ignore=v1/kv_connector/unit/test_multi_connector.py --ignore=v1/kv_connector/unit/test_example_connector.py --ignore=v1/kv_connector/unit/test_lmcache_integration.py --ignore=v1/kv_connector/unit/test_hf3fs_client.py --ignore=v1/kv_connector/unit/test_hf3fs_connector.py --ignore=v1/kv_connector/unit/test_hf3fs_metadata_server.py
+    pytest -v -s v1/kv_connector/unit --ignore=v1/kv_connector/unit/test_multi_connector.py --ignore=v1/kv_connector/unit/test_nixl_connector.py --ignore=v1/kv_connector/unit/test_example_connector.py --ignore=v1/kv_connector/unit/test_lmcache_integration.py -k "not (test_register_kv_caches and FLASH_ATTN and True)"
     pytest -v -s v1/test_serial_utils.py
 '

.buildkite/scripts/lib/manylinux.sh

@@ -1,127 +0,0 @@
-#!/usr/bin/env bash
-# SPDX-License-Identifier: Apache-2.0
-# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
-#
-# Shared helper for rewriting a wheel's platform tag from the generic
-# ``linux_<arch>`` to the correct ``manylinux_<major>_<minor>_<arch>``.
-# After sourcing, call ``apply_manylinux_tag <wheel>`` on each wheel
-# that still carries the generic tag; the renamed path is printed on
-# stdout (logs go to stderr).
-#
-# Why a pinned Docker container instead of using whatever Python
-# happens to be on the agent:
-#   - vLLM's release agents are heterogeneous -- they don't agree on
-#     a Python minor version, and we can't rely on a particular
-#     ``auditwheel`` being installed.
-#   - ``detect-manylinux-tag.py`` reads ``auditwheel.wheel_abi`` and
-#     ``Policy.sym_policy``, which are *internal* APIs without a
-#     stability promise. Pinning both Python and auditwheel makes the
-#     detected tag a function of the inputs alone, and shifts version
-#     bumps from "implicit drift" to "deliberate, retested change".
-#   - Other release scripts (``generate-and-upload-nightly-index.sh``,
-#     ``upload-rocm-wheels.sh``) already use the python:3-slim image
-#     when the agent's interpreter is too old; this is the same idea
-#     made stricter.
-#
-# To keep the per-wheel cost down (the ROCm upload retags ~10 wheels
-# each run), we install auditwheel into a long-lived helper container
-# once on source, then ``docker exec`` into it for each call.
-#
-# Trap behaviour:
-# - Sourcing installs an EXIT trap that calls ``manylinux_cleanup`` to
-#   tear down the helper container. Any EXIT trap that was already in
-#   place when this file was sourced is captured and run AFTER our
-#   cleanup, so we don't silently clobber it.
-# - If a caller sets a new EXIT trap *after* sourcing, that trap will
-#   replace ours; in that case the caller should call
-#   ``manylinux_cleanup`` from their own handler.
-
-if [[ -n "${_MANYLINUX_LIB_SOURCED:-}" ]]; then
-    return 0
-fi
-_MANYLINUX_LIB_SOURCED=1
-
-# Pin both sides. Bump these deliberately and re-run a representative
-# wheel from each build target through the detection.
-_MANYLINUX_PYTHON_IMAGE="python:3.12-slim"
-_MANYLINUX_AUDITWHEEL_VERSION="6.6.0"
-
-# Resolve our own directory (and the sibling detect script) using the
-# canonical, symlink-resolved path. The container mounts cwd at the
-# same absolute path on both sides, so all paths we hand to it -- the
-# script, the wheel -- must canonicalise to a location under cwd.
-_MANYLINUX_LIB_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd -P)"
-_MANYLINUX_DETECT_SCRIPT="$(cd "${_MANYLINUX_LIB_DIR}/.." && pwd -P)/detect-manylinux-tag.py"
-_MANYLINUX_CWD="$(pwd -P)"
-
-docker pull --quiet "$_MANYLINUX_PYTHON_IMAGE" >/dev/null
-
-# Spin up a long-lived helper container so we install auditwheel once
-# and then ``docker exec`` into it for each wheel.
-#
-# The container runs as root so ``pip install`` can write into the
-# system site-packages; individual ``docker exec`` calls below pin
-# themselves to the host UID so any file rename happens with host
-# ownership, not root.
-_MANYLINUX_CONTAINER="$(docker run -d --rm \
-    -v "$_MANYLINUX_CWD:$_MANYLINUX_CWD" \
-    -w "$_MANYLINUX_CWD" \
-    "$_MANYLINUX_PYTHON_IMAGE" \
-    sleep infinity)"
-docker exec "$_MANYLINUX_CONTAINER" \
-    pip install --quiet --disable-pip-version-check \
-    --root-user-action=ignore \
-    "auditwheel==${_MANYLINUX_AUDITWHEEL_VERSION}"
-
-# Public cleanup -- safe to call multiple times.
-manylinux_cleanup() {
-    if [[ -n "${_MANYLINUX_CONTAINER:-}" ]]; then
-        docker rm -f "$_MANYLINUX_CONTAINER" >/dev/null 2>&1 || true
-        _MANYLINUX_CONTAINER=""
-    fi
-}
-
-# Capture any EXIT trap that was already in place so we can chain to
-# it rather than overwrite it. ``trap -p EXIT`` prints the handler in
-# eval-able form (``trap -- 'CMD' EXIT``) or nothing if unset; we
-# strip the wrapper to recover ``CMD``. Handles the common case --
-# CMDs without embedded single quotes -- and degrades gracefully (we
-# still run our own cleanup) for the pathological case.
-_manylinux_prev_exit_trap_cmd=""
-_manylinux_existing_exit_trap="$(trap -p EXIT)"
-if [[ -n "$_manylinux_existing_exit_trap" ]]; then
-    _tmp="${_manylinux_existing_exit_trap#trap -- \'}"
-    _manylinux_prev_exit_trap_cmd="${_tmp%\' EXIT}"
-    unset _tmp
-fi
-unset _manylinux_existing_exit_trap
-
-_manylinux_run_exit_chain() {
-    manylinux_cleanup
-    if [[ -n "$_manylinux_prev_exit_trap_cmd" ]]; then
-        eval "$_manylinux_prev_exit_trap_cmd"
-    fi
-}
-trap _manylinux_run_exit_chain EXIT
-
-# Detect the manylinux platform tag for a single wheel and rename it
-# in place, printing the renamed wheel path on stdout. Returns
-# non-zero on failure (which under ``set -e`` propagates to caller).
-#
-# The wheel must be reachable via a path under the host cwd so it's
-# visible inside the helper container; in CI the wheels always live
-# under ``artifacts/`` so this is fine.
-apply_manylinux_tag() {
-    local wheel="$1"
-    local abs_wheel
-    abs_wheel="$(realpath "$wheel")"
-    local new_wheel
-    new_wheel="$(docker exec -u "$(id -u):$(id -g)" \
-        "$_MANYLINUX_CONTAINER" \
-        python "$_MANYLINUX_DETECT_SCRIPT" "$abs_wheel")"
-    if [[ -z "$new_wheel" || ! -f "$new_wheel" ]]; then
-        echo "apply_manylinux_tag: detect-manylinux-tag.py did not produce a valid wheel path for $wheel" >&2
-        return 1
-    fi
-    printf '%s\n' "$new_wheel"
-}

.buildkite/scripts/lib/select-python.sh

@@ -1,41 +0,0 @@
-#!/usr/bin/env bash
-# SPDX-License-Identifier: Apache-2.0
-# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
-#
-# Pick a Python interpreter for buildkite scripts: prefer a local
-# ``python3`` if it is recent enough (>= 3.12), otherwise fall back to
-# a one-shot Docker container running ``python:3-slim``. After
-# ``select_python`` returns, ``$PYTHON`` is set in the caller's shell
-# and is safe to use as a command (e.g. ``$PYTHON some_script.py``).
-#
-# The 3.12 threshold matches what the existing nightly-index work
-# expects -- typing features used by ``generate-nightly-index.py``.
-# This helper does not pin the *minor* version; if you need stricter
-# reproducibility (e.g. relying on auditwheel internals), invoke
-# Docker yourself with a pinned tag rather than calling this.
-
-if [[ -n "${_SELECT_PYTHON_LIB_SOURCED:-}" ]]; then
-    return 0
-fi
-_SELECT_PYTHON_LIB_SOURCED=1
-
-# Sets ``PYTHON`` in the caller's shell and exports it. Idempotent --
-# calling twice is safe and the second call simply re-runs the probe.
-select_python() {
-    local py="${PYTHON_PROG:-python3}"
-    local has_new_python
-    has_new_python=$("$py" -c \
-        "print(1 if __import__('sys').version_info >= (3,12) else 0)" \
-        2>/dev/null || echo 0)
-    if [[ "$has_new_python" -eq 0 ]]; then
-        # ``-u $(id -u):$(id -g)`` so files created via the container
-        # end up owned by the host user, not root.
-        docker pull python:3-slim
-        PYTHON="docker run --rm -u $(id -u):$(id -g) -v $(pwd):/app -w /app python:3-slim python3"
-    else
-        PYTHON="$py"
-    fi
-    export PYTHON
-    echo "Using python interpreter: $PYTHON"
-    echo "Python version: $($PYTHON --version)"
-}

.buildkite/scripts/scheduled_integration_test/qwen30b_a3b_fp8_dp4_async_eplb.sh

@@ -1,55 +0,0 @@
-#!/usr/bin/env bash
-set -euxo pipefail
-
-# args: [THRESHOLD] [NUM_QUESTIONS] [START_PORT]
-THRESHOLD=${1:-0.8}
-NUM_Q=${2:-1319}
-PORT=${3:-8050}
-OUT_DIR=${OUT_DIR:-/tmp/vllm-scheduled}
-mkdir -p "${OUT_DIR}"
-
-wait_for_server() {
-  local port=$1
-  timeout 600 bash -c '
-    until curl -sf "http://127.0.0.1:'"$port"'/health" > /dev/null; do
-      sleep 1
-    done'
-}
-
-MODEL="Qwen/Qwen3-30B-A3B-FP8"
-BACK="allgather_reducescatter"
-
-cleanup() {
-  if [[ -n "${SERVER_PID:-}" ]] && kill -0 "${SERVER_PID}" 2>/dev/null; then
-    kill "${SERVER_PID}" 2>/dev/null || true
-    for _ in {1..20}; do
-      kill -0 "${SERVER_PID}" 2>/dev/null || break
-      sleep 0.5
-    done
-    kill -9 "${SERVER_PID}" 2>/dev/null || true
-  fi
-}
-trap cleanup EXIT
-
-VLLM_DEEP_GEMM_WARMUP=skip \
-vllm serve "$MODEL" \
---enforce-eager \
---data-parallel-size 4 \
---enable-expert-parallel \
---enable-eplb \
---all2all-backend "$BACK" \
---eplb-config '{"window_size":20, "step_interval":100, "use_async":true}' \
---trust-remote-code \
---max-model-len 2048 \
---port "$PORT" &
-SERVER_PID=$!
-wait_for_server "$PORT"
-
-TAG=$(echo "$MODEL" | tr '/: \\n' '_____')
-OUT="${OUT_DIR}/${TAG}_${BACK}.json"
-python3 tests/evals/gsm8k/gsm8k_eval.py --host http://127.0.0.1 --port "$PORT" --num-questions "${NUM_Q}" --save-results "${OUT}"
-python3 - <<PY
-import json; acc=json.load(open('${OUT}'))['accuracy']
-print(f"${MODEL} ${BACK}: accuracy {acc:.3f}")
-assert acc >= ${THRESHOLD}, f"${MODEL} ${BACK} accuracy {acc}"
-PY

.buildkite/scripts/tool_call/run-bfcl-eval.sh

@@ -28,7 +28,6 @@
 #   BFCL_MAX_MODEL_LEN  - Max model length (default: 4096)
 #   BFCL_PORT           - Server port (default: 8000)
 #   BFCL_REASONING_PARSER - Reasoning parser name (default: disabled)
-#   BFCL_TEMPERATURE    - Temperature (default: 0.0)
 #   BFCL_EXTRA_ARGS     - Additional vLLM server args
 
 set -euo pipefail
@@ -44,7 +43,6 @@ TP_SIZE="${BFCL_TP_SIZE:-1}"
 MAX_MODEL_LEN="${BFCL_MAX_MODEL_LEN:-4096}"
 PORT="${BFCL_PORT:-8000}"
 REASONING_PARSER="${BFCL_REASONING_PARSER:-}"
-TEMPERATURE="${BFCL_TEMPERATURE:-0.0}"
 EXTRA_ARGS="${BFCL_EXTRA_ARGS:-}"
 
 # Set up output directory
@@ -141,7 +139,7 @@ echo "vLLM server is ready. (started in ${SECONDS_WAITED}s)"
 # be patched in-process so BFCL knows to use the OpenAI-compatible handler
 # against our local vLLM server.
 bfcl_exit_code=0
-python3 - "$MODEL" "$TEST_CATEGORY" "$NUM_THREADS" "$PORT" "$API_TYPE" "$TEMPERATURE" "$OUTPUT_DIR" << 'PYEOF' || bfcl_exit_code=$?
+python3 - "$MODEL" "$TEST_CATEGORY" "$NUM_THREADS" "$PORT" "$API_TYPE" "$OUTPUT_DIR" << 'PYEOF' || bfcl_exit_code=$?
 import os
 import sys
 
@@ -150,8 +148,7 @@ test_category = sys.argv[2]
 num_threads = int(sys.argv[3])
 port = sys.argv[4]
 api_type = sys.argv[5]
-temperature = float(sys.argv[6])
-output_dir = sys.argv[7] if len(sys.argv) > 7 and sys.argv[7] else os.getcwd()
+output_dir = sys.argv[6] if len(sys.argv) > 6 and sys.argv[6] else os.getcwd()
 
 os.environ["OPENAI_BASE_URL"] = f"http://localhost:{port}/v1"
 os.environ["OPENAI_API_KEY"] = "dummy"
@@ -207,7 +204,6 @@ gen_kwargs["model"] = [model]
 gen_kwargs["test_category"] = [c.strip() for c in test_category.split(",")]
 gen_kwargs["skip_server_setup"] = True
 gen_kwargs["num_threads"] = num_threads
-gen_kwargs["temperature"] = temperature
 generate(**gen_kwargs)
 
 # ---- evaluate ----

.buildkite/scripts/upload-nightly-wheels.sh

@@ -2,18 +2,14 @@
 
 set -ex
 
-# Upload a single wheel to S3, after detecting and applying the appropriate
-# manylinux platform tag with auditwheel.
+# Upload a single wheel to S3 (rename linux -> manylinux).
 # Index generation is handled separately by generate-and-upload-nightly-index.sh.
 
-# shellcheck source=lib/manylinux.sh
-source .buildkite/scripts/lib/manylinux.sh
-
 BUCKET="vllm-wheels"
 SUBPATH=$BUILDKITE_COMMIT
 S3_COMMIT_PREFIX="s3://$BUCKET/$SUBPATH/"
 
-# ========= locate the wheel ==========
+# ========= collect, rename & upload the wheel ==========
 
 # Assume wheels are in artifacts/dist/*.whl
 wheel_files=(artifacts/dist/*.whl)
@@ -25,9 +21,19 @@ if [[ ${#wheel_files[@]} -ne 1 ]]; then
 fi
 wheel="${wheel_files[0]}"
 
-# ========= detect manylinux tag and rename ==========
+# default build image uses ubuntu 20.04, which corresponds to manylinux_2_31
+# we also accept params as manylinux tag
+# refer to https://github.com/mayeut/pep600_compliance?tab=readme-ov-file#acceptable-distros-to-build-wheels
+manylinux_version="${1:-manylinux_2_31}"
 
-wheel="$(apply_manylinux_tag "$wheel")"
+# Rename 'linux' to the appropriate manylinux version in the wheel filename
+if [[ "$wheel" != *"linux"* ]]; then
+  echo "Error: Wheel filename does not contain 'linux': $wheel"
+  exit 1
+fi
+new_wheel="${wheel/linux/$manylinux_version}"
+mv -- "$wheel" "$new_wheel"
+wheel="$new_wheel"
 echo "Renamed wheel to: $wheel"
 
 # Extract the version from the wheel

.buildkite/scripts/upload-rocm-wheels.sh

@@ -20,6 +20,10 @@ BUCKET="${S3_BUCKET:-vllm-wheels}"
 ROCM_SUBPATH="rocm/${BUILDKITE_COMMIT}"
 S3_COMMIT_PREFIX="s3://$BUCKET/$ROCM_SUBPATH/"
 INDICES_OUTPUT_DIR="rocm-indices"
+PYTHON="${PYTHON_PROG:-python3}"
+
+# ROCm uses manylinux_2_35 (Ubuntu 22.04 based)
+MANYLINUX_VERSION="manylinux_2_35"
 
 echo "========================================"
 echo "ROCm Wheel Upload Configuration"
@@ -30,21 +34,19 @@ echo "Commit: $BUILDKITE_COMMIT"
 echo "Branch: $BUILDKITE_BRANCH"
 echo "========================================"
 
-# ======== Part 0: Setup Python and helpers ========
+# ======== Part 0: Setup Python ========
 
-# Pick a Python interpreter for index generation -- local if recent
-# enough, else a one-shot docker fallback.
-# shellcheck source=lib/select-python.sh
-source .buildkite/scripts/lib/select-python.sh
-select_python
+# Detect if python3.12+ is available
+has_new_python=$($PYTHON -c "print(1 if __import__('sys').version_info >= (3,12) else 0)" 2>/dev/null || echo 0)
+if [[ "$has_new_python" -eq 0 ]]; then
+    # Use new python from docker
+    # Use --user to ensure files are created with correct ownership (not root)
+    docker pull python:3-slim
+    PYTHON="docker run --rm --user $(id -u):$(id -g) -v $(pwd):/app -w /app python:3-slim python3"
+fi
 
-# Set up auditwheel-in-a-container for the manylinux retagging step.
-# Distinct from select_python: ``manylinux.sh`` deliberately pins both
-# the Python and auditwheel versions (the script reads auditwheel
-# internals) and so always runs in a known-good container regardless
-# of what's on the agent.
-# shellcheck source=lib/manylinux.sh
-source .buildkite/scripts/lib/manylinux.sh
+echo "Using python interpreter: $PYTHON"
+echo "Python version: $($PYTHON --version)"
 
 # ======== Part 1: Collect and prepare wheels ========
 
@@ -61,18 +63,11 @@ if [ "$WHEEL_COUNT" -eq 0 ]; then
     exit 1
 fi
 
-# Detect the appropriate manylinux platform tag for any wheel that still
-# carries the generic ``linux_<arch>`` tag, and rename it in place. We use
-# auditwheel via ``apply_manylinux_tag`` (see lib/manylinux.sh) rather than
-# a hard-coded ``manylinux_2_35`` string so that the label tracks the actual
-# glibc symbol versions used by the binaries (and stays correct if the
-# rocm_base image is rebased).
-#
-# The ``linux``/``manylinux`` filter below skips both pre-tagged wheels
-# (e.g. upstream torch) and pure-Python ``-any.whl`` wheels.
+# Rename linux to manylinux in wheel filenames
 for wheel in all-rocm-wheels/*.whl; do
     if [[ "$wheel" == *"linux"* ]] && [[ "$wheel" != *"manylinux"* ]]; then
-        new_wheel="$(apply_manylinux_tag "$wheel")"
+        new_wheel="${wheel/linux/$MANYLINUX_VERSION}"
+        mv -- "$wheel" "$new_wheel"
         echo "Renamed: $(basename "$wheel") -> $(basename "$new_wheel")"
     fi
 done

.buildkite/test_areas/attention.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: V1 attention (H100)
-  key: v1-attention-h100
   timeout_in_minutes: 30
   device: h100
   source_file_dependencies:
@@ -15,7 +14,6 @@ steps:
     - pytest -v -s v1/attention
 
 - label: V1 attention (B200)
-  key: v1-attention-b200
   timeout_in_minutes: 30
   device: b200
   source_file_dependencies:

.buildkite/test_areas/basic_correctness.yaml

@@ -3,9 +3,7 @@ depends_on:
   - image-build
 steps:
 - label: Basic Correctness
-  key: basic-correctness
   timeout_in_minutes: 30
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/basic_correctness/test_basic_correctness

.buildkite/test_areas/benchmarks.yaml

@@ -3,9 +3,7 @@ depends_on:
   - image-build
 steps:
 - label: Benchmarks CLI Test
-  key: benchmarks-cli-test
   timeout_in_minutes: 20
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/benchmarks/
@@ -13,7 +11,6 @@ steps:
   - pytest -v -s benchmarks/
 
 - label: Attention Benchmarks Smoke Test (B200)
-  key: attention-benchmarks-smoke-test-b200
   device: b200
   num_gpus: 2
   optional: true

.buildkite/test_areas/compile.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: Sequence Parallel Correctness Tests (2 GPUs)
-  key: sequence-parallel-correctness-tests-2-gpus
   timeout_in_minutes: 50
   working_dir: "/vllm-workspace/"
   num_devices: 2
@@ -18,7 +17,6 @@ steps:
   - pytest -v -s tests/compile/correctness_e2e/test_sequence_parallel.py
 
 - label: Sequence Parallel Correctness Tests (2xH100)
-  key: sequence-parallel-correctness-tests-2xh100
   timeout_in_minutes: 50
   working_dir: "/vllm-workspace/"
   device: h100
@@ -29,7 +27,6 @@ steps:
   - pytest -v -s tests/compile/correctness_e2e/test_sequence_parallel.py
 
 - label: AsyncTP Correctness Tests (2xH100)
-  key: asynctp-correctness-tests-2xh100
   timeout_in_minutes: 50
   working_dir: "/vllm-workspace/"
   device: h100
@@ -40,7 +37,6 @@ steps:
   - pytest -v -s tests/compile/correctness_e2e/test_async_tp.py
 
 - label: AsyncTP Correctness Tests (B200)
-  key: asynctp-correctness-tests-b200
   timeout_in_minutes: 50
   working_dir: "/vllm-workspace/"
   device: b200
@@ -51,7 +47,6 @@ steps:
   - pytest -v -s tests/compile/correctness_e2e/test_async_tp.py
 
 - label: Distributed Compile Unit Tests (2xH100)
-  key: distributed-compile-unit-tests-2xh100
   timeout_in_minutes: 20
   working_dir: "/vllm-workspace/"
   device: h100
@@ -65,7 +60,6 @@ steps:
   - pytest -s -v tests/compile/passes/distributed
 
 - label: Fusion and Compile Unit Tests (2xB200)
-  key: fusion-and-compile-unit-tests-2xb200
   timeout_in_minutes: 20
   working_dir: "/vllm-workspace/"
   device: b200
@@ -78,7 +72,6 @@ steps:
   - vllm/v1/attention/backends/flashinfer.py
   - vllm/compilation/ # TODO(luka) limit to vllm/compilation/passes
   - tests/compile/passes/test_fusion_attn.py
-  - tests/compile/passes/test_mla_attn_quant_fusion.py
   - tests/compile/passes/test_silu_mul_quant_fusion.py
   - tests/compile/passes/distributed/test_fusion_all_reduce.py
   - tests/compile/fullgraph/test_full_graph.py
@@ -86,7 +79,6 @@ steps:
     # b200 runners are limited, so we limit the tests to the minimum set only supported on Blackwell
     - nvidia-smi
     - pytest -v -s tests/compile/passes/test_fusion_attn.py -k FLASHINFER
-    - pytest -v -s tests/compile/passes/test_mla_attn_quant_fusion.py
     - pytest -v -s tests/compile/passes/test_silu_mul_quant_fusion.py
     # this runner has 2 GPUs available even though num_devices=2 is not set
     - pytest -v -s tests/compile/passes/distributed/test_fusion_all_reduce.py
@@ -95,7 +87,6 @@ steps:
     - pytest -v -s tests/compile/fullgraph/test_full_graph.py::test_fp8_kv_scale_compile
 
 - label: Fusion E2E Quick (H100)
-  key: fusion-e2e-quick-h100
   timeout_in_minutes: 15
   working_dir: "/vllm-workspace/"
   device: h100
@@ -114,7 +105,6 @@ steps:
     - pytest -v -s tests/compile/fusions_e2e/test_tp1_quant.py -k "inductor_partition and not +rms_norm and +quant_fp8 and (qwen3 or deepseek)"
 
 - label: Fusion E2E Config Sweep (H100)
-  key: fusion-e2e-config-sweep-h100
   timeout_in_minutes: 30
   working_dir: "/vllm-workspace/"
   device: h100
@@ -134,7 +124,6 @@ steps:
     - pytest -v -s tests/compile/fusions_e2e/test_tp1_quant.py -k "llama-3"
 
 - label: Fusion E2E Config Sweep (B200)
-  key: fusion-e2e-config-sweep-b200
   timeout_in_minutes: 30
   working_dir: "/vllm-workspace/"
   device: b200
@@ -148,7 +137,6 @@ steps:
     - pytest -v -s tests/compile/fusions_e2e/test_tp1_quant.py -k "inductor_partition and (FLASHINFER and not +rms_norm and (not +quant_fp8 or +quant_fp8 and (qwen3 or deepseek)) or llama-3)"
 
 - label: Fusion E2E TP2 Quick (H100)
-  key: fusion-e2e-tp2-quick-h100
   timeout_in_minutes: 20
   working_dir: "/vllm-workspace/"
   device: h100
@@ -166,7 +154,6 @@ steps:
     - pytest -v -s tests/compile/fusions_e2e/test_tp2_async_tp.py -k "inductor_partition and not +rms_norm and (not +quant_fp8 or +quant_fp8 and (qwen3 or deepseek))"
 
 - label: Fusion E2E TP2 AR-RMS Config Sweep (H100)
-  key: fusion-e2e-tp2-ar-rms-config-sweep-h100
   timeout_in_minutes: 40
   working_dir: "/vllm-workspace/"
   device: h100
@@ -186,7 +173,6 @@ steps:
     - pytest -v -s tests/compile/fusions_e2e/test_tp2_ar_rms.py -k "llama-3"
 
 - label: Fusion E2E TP2 AsyncTP Config Sweep (H100)
-  key: fusion-e2e-tp2-asynctp-config-sweep-h100
   timeout_in_minutes: 40
   working_dir: "/vllm-workspace/"
   device: h100
@@ -206,7 +192,6 @@ steps:
     - pytest -v -s tests/compile/fusions_e2e/test_tp2_async_tp.py -k "llama-3"
 
 - label: Fusion E2E TP2 (B200)
-  key: fusion-e2e-tp2-b200
   timeout_in_minutes: 20
   working_dir: "/vllm-workspace/"
   device: b200

.buildkite/test_areas/cuda.yaml

@@ -3,9 +3,7 @@ depends_on:
   - image-build
 steps:
 - label: Platform Tests (CUDA)
-  key: platform-tests-cuda
   timeout_in_minutes: 15
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/cuda
@@ -14,7 +12,6 @@ steps:
     - pytest -v -s cuda/test_platform_no_cuda_init.py
 
 - label: Cudagraph
-  key: cudagraph
   timeout_in_minutes: 20
   source_file_dependencies:
   - tests/v1/cudagraph

.buildkite/test_areas/disaggregated.yaml

@@ -1,106 +0,0 @@
-group: Disaggregated
-depends_on: 
-  - image-build
-steps:
-- label: Distributed NixlConnector PD accuracy (4 GPUs)
-  key: distributed-nixlconnector-pd-accuracy-4-gpus
-  timeout_in_minutes: 30
-  working_dir: "/vllm-workspace/tests"
-  num_devices: 4
-  source_file_dependencies:
-    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
-    - tests/v1/kv_connector/nixl_integration/
-  commands:
-    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
-    - bash v1/kv_connector/nixl_integration/config_sweep_accuracy_test.sh
-- label: Distributed FlashInfer NixlConnector PD accuracy (4 GPUs)
-  key: distributed-flashinfer-nixlconnector-pd-accuracy-4-gpus
-  timeout_in_minutes: 30
-  working_dir: "/vllm-workspace/tests"
-  num_devices: 4
-  source_file_dependencies:
-    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
-    - tests/v1/kv_connector/nixl_integration/
-  commands:
-    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
-    - FLASHINFER=1 bash v1/kv_connector/nixl_integration/config_sweep_accuracy_test.sh
-
-- label: DP EP Distributed NixlConnector PD accuracy tests (4 GPUs)
-  key: dp-ep-distributed-nixlconnector-pd-accuracy-tests-4-gpus
-  timeout_in_minutes: 30
-  working_dir: "/vllm-workspace/tests"
-  num_devices: 4
-  source_file_dependencies:
-    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
-    - tests/v1/kv_connector/nixl_integration/
-  commands:
-    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
-    - DP_EP=1 bash v1/kv_connector/nixl_integration/config_sweep_accuracy_test.sh
-
-- label: CrossLayer KV layout Distributed NixlConnector PD accuracy tests (4 GPUs)
-  key: crosslayer-kv-layout-distributed-nixlconnector-pd-accuracy-tests-4-gpus
-  timeout_in_minutes: 30
-  working_dir: "/vllm-workspace/tests"
-  num_devices: 4
-  source_file_dependencies:
-    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
-    - tests/v1/kv_connector/nixl_integration/
-  commands:
-    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
-    - CROSS_LAYERS_BLOCKS=True bash v1/kv_connector/nixl_integration/config_sweep_accuracy_test.sh
-
-- label: Hybrid SSM NixlConnector PD accuracy tests (4 GPUs)
-  key: hybrid-ssm-nixlconnector-pd-accuracy-tests-4-gpus
-  timeout_in_minutes: 20
-  working_dir: "/vllm-workspace/tests"
-  num_devices: 4
-  source_file_dependencies:
-    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
-    - tests/v1/kv_connector/nixl_integration/
-  commands:
-    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
-    - HYBRID_SSM=1 bash v1/kv_connector/nixl_integration/config_sweep_accuracy_test.sh
-
-- label: MultiConnector (Nixl+Offloading) PD accuracy (2 GPUs)
-  key: multiconnector-nixl-offloading-pd-accuracy-2-gpus
-  timeout_in_minutes: 30
-  working_dir: "/vllm-workspace/tests"
-  num_devices: 2
-  source_file_dependencies:
-    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
-    - vllm/distributed/kv_transfer/kv_connector/v1/multi_connector.py
-    - vllm/distributed/kv_transfer/kv_connector/v1/offloading_connector.py
-    - vllm/distributed/kv_transfer/kv_connector/v1/offloading/
-    - tests/v1/kv_connector/nixl_integration/
-  commands:
-    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
-    - bash v1/kv_connector/nixl_integration/run_multi_connector_accuracy_test.sh
-
-- label: NixlConnector PD + Spec Decode acceptance (2 GPUs)
-  key: nixlconnector-pd-spec-decode-acceptance-2-gpus
-  timeout_in_minutes: 30
-  device: a100
-  working_dir: "/vllm-workspace/tests"
-  num_devices: 2
-  source_file_dependencies:
-    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
-    - vllm/v1/worker/kv_connector_model_runner_mixin.py
-    - tests/v1/kv_connector/nixl_integration/
-  commands:
-    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
-    - bash v1/kv_connector/nixl_integration/spec_decode_acceptance_test.sh
-
-- label: MultiConnector (Nixl+Offloading) PD edge cases (2 GPUs)
-  key: multiconnector-nixl-offloading-pd-edge-cases-2-gpus
-  timeout_in_minutes: 30
-  working_dir: "/vllm-workspace/tests"
-  num_devices: 2
-  source_file_dependencies:
-    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
-    - vllm/distributed/kv_transfer/kv_connector/v1/multi_connector.py
-    - vllm/distributed/kv_transfer/kv_connector/v1/offloading_connector.py
-    - vllm/distributed/kv_transfer/kv_connector/v1/offloading/
-    - tests/v1/kv_connector/nixl_integration/
-  commands:
-    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
-    - bash v1/kv_connector/nixl_integration/run_multi_connector_edge_case_test.sh

.buildkite/test_areas/distributed.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: Distributed Comm Ops
-  key: distributed-comm-ops
   timeout_in_minutes: 20
   working_dir: "/vllm-workspace/tests"
   num_devices: 2
@@ -17,7 +16,6 @@ steps:
   - pytest -v -s distributed/test_shm_storage.py
 
 - label: Distributed DP Tests (2 GPUs)
-  key: distributed-dp-tests-2-gpus
   timeout_in_minutes: 20
   working_dir: "/vllm-workspace/tests"
   num_devices: 2
@@ -39,7 +37,6 @@ steps:
   - DP_SIZE=2 pytest -v -s entrypoints/openai/test_multi_api_servers.py
 
 - label: Distributed Compile + RPC Tests (2 GPUs)
-  key: distributed-compile-rpc-tests-2-gpus
   timeout_in_minutes: 20
   working_dir: "/vllm-workspace/tests"
   num_devices: 2
@@ -62,7 +59,6 @@ steps:
   - pytest -v -s ./compile/test_wrapper.py
 
 - label: Distributed Torchrun + Shutdown Tests (2 GPUs)
-  key: distributed-torchrun-shutdown-tests-2-gpus
   timeout_in_minutes: 20
   working_dir: "/vllm-workspace/tests"
   num_devices: 2
@@ -85,7 +81,6 @@ steps:
   - pytest -v -s v1/worker/test_worker_memory_snapshot.py
 
 - label: Distributed Torchrun + Examples (4 GPUs)
-  key: distributed-torchrun-examples-4-gpus
   timeout_in_minutes: 30
   working_dir: "/vllm-workspace"
   num_devices: 4
@@ -93,8 +88,9 @@ steps:
   - vllm/distributed/
   - tests/distributed/test_torchrun_example.py
   - tests/distributed/test_torchrun_example_moe.py
+  - examples/offline_inference/rlhf_colocate.py
   - examples/rl/
-  - tests/examples/features/data_parallel/data_parallel_offline.py
+  - tests/examples/offline_inference/data_parallel.py
   commands:
   # https://github.com/NVIDIA/nccl/issues/1838
   - export NCCL_CUMEM_HOST_ENABLE=0
@@ -111,13 +107,12 @@ steps:
   # test with torchrun tp=2 and dp=2 with ep
   - TP_SIZE=2 DP_SIZE=2 ENABLE_EP=1 torchrun --nproc-per-node=4 tests/distributed/test_torchrun_example_moe.py
   # test with internal dp
-  - python3 examples/features/data_parallel/data_parallel_offline.py --enforce-eager
+  - python3 examples/offline_inference/data_parallel.py --enforce-eager
   # rlhf examples
   - VLLM_ALLOW_INSECURE_SERIALIZATION=1 python3 examples/rl/rlhf_nccl.py
   - VLLM_ALLOW_INSECURE_SERIALIZATION=1 python3 examples/rl/rlhf_ipc.py
 
 - label: Distributed DP Tests (4 GPUs)
-  key: distributed-dp-tests-4-gpus
   timeout_in_minutes: 30
   working_dir: "/vllm-workspace/tests"
   num_devices: 4
@@ -138,7 +133,6 @@ steps:
   - pytest -v -s distributed/test_utils.py
 
 - label: Distributed Compile + Comm (4 GPUs)
-  key: distributed-compile-comm-4-gpus
   timeout_in_minutes: 30
   working_dir: "/vllm-workspace/tests"
   num_devices: 4
@@ -160,28 +154,24 @@ steps:
   - pytest -v -s distributed/test_multiproc_executor.py::test_multiproc_executor_multi_node
 
 - label: Distributed Tests (8 GPUs)(H100)
-  key: distributed-tests-8-gpus-h100
   timeout_in_minutes: 10
   device: h100
   num_devices: 8
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
-  - examples/features/torchrun/torchrun_dp_example_offline.py
+  - examples/offline_inference/torchrun_dp_example.py
   - vllm/config/parallel.py
   - vllm/distributed/
   - vllm/v1/engine/llm_engine.py
   - vllm/v1/executor/uniproc_executor.py
   - vllm/v1/worker/gpu_worker.py
-  - tests/distributed/test_mnnvl_alltoall.py
-
   commands:
   # https://github.com/NVIDIA/nccl/issues/1838
   - export NCCL_CUMEM_HOST_ENABLE=0
   # test with torchrun tp=2 and dp=4 with ep
-  - torchrun --nproc-per-node=8 ../examples/features/torchrun/torchrun_dp_example_offline.py --tp-size=2 --pp-size=1 --dp-size=4 --enable-ep
+  - torchrun --nproc-per-node=8 ../examples/offline_inference/torchrun_dp_example.py --tp-size=2 --pp-size=1 --dp-size=4 --enable-ep
 
 - label: Distributed Tests (4 GPUs)(A100)
-  key: distributed-tests-4-gpus-a100
   device: a100
   optional: true
   num_devices: 4
@@ -196,7 +186,6 @@ steps:
   - pytest -v -s -x lora/test_mixtral.py
 
 - label: Distributed Tests (2 GPUs)(H100)
-  key: distributed-tests-2-gpus-h100
   timeout_in_minutes: 15
   device: h100
   optional: true
@@ -205,13 +194,10 @@ steps:
   commands:
     - pytest -v -s tests/distributed/test_context_parallel.py
     - VLLM_ALLOW_INSECURE_SERIALIZATION=1 python3 examples/rl/rlhf_async_new_apis.py
-    - VLLM_USE_DEEP_GEMM=1 VLLM_LOGGING_LEVEL=DEBUG python3 examples/features/data_parallel/data_parallel_offline.py --model=Qwen/Qwen1.5-MoE-A2.7B -tp=1 -dp=2 --max-model-len=2048 --all2all-backend=deepep_high_throughput
+    - VLLM_USE_DEEP_GEMM=1 VLLM_LOGGING_LEVEL=DEBUG python3 examples/offline_inference/data_parallel.py --model=Qwen/Qwen1.5-MoE-A2.7B -tp=1 -dp=2 --max-model-len=2048 --all2all-backend=deepep_high_throughput
     - pytest -v -s tests/v1/distributed/test_dbo.py
-    - VLLM_ALLOW_INSECURE_SERIALIZATION=1 pytest -v -s tests/distributed/test_weight_transfer.py
-    - pytest -v -s tests/distributed/test_packed_tensor.py
 
 - label: Distributed Tests (2 GPUs)(B200)
-  key: distributed-tests-2-gpus-b200
   device: b200
   optional: true
   working_dir: "/vllm-workspace/"
@@ -220,12 +206,8 @@ steps:
     - pytest -v -s tests/distributed/test_context_parallel.py
     - pytest -v -s tests/distributed/test_nccl_symm_mem_allreduce.py
     - pytest -v -s tests/v1/distributed/test_dbo.py
-    - pytest -v -s tests/distributed/test_mnnvl_alltoall.py
-
-    
 
 - label: 2 Node Test (4 GPUs)
-  key: 2-node-test-4-gpus
   timeout_in_minutes: 30
   working_dir: "/vllm-workspace/tests"
   num_devices: 2
@@ -238,12 +220,68 @@ steps:
   - vllm/executor/
   - vllm/model_executor/models/
   - tests/distributed/
-  - tests/examples/features/data_parallel/data_parallel_offline.py
+  - tests/examples/offline_inference/data_parallel.py
   commands:
-    - ./.buildkite/scripts/run-multi-node-test.sh /vllm-workspace/tests 2 2 $IMAGE_TAG "VLLM_TEST_SAME_HOST=0 torchrun --nnodes 2 --nproc-per-node=2 --rdzv_backend=c10d --rdzv_endpoint=192.168.10.10 distributed/test_same_node.py | grep 'Same node test passed' && NUM_NODES=2 torchrun --nnodes 2 --nproc-per-node=2 --rdzv_backend=c10d --rdzv_endpoint=192.168.10.10 distributed/test_node_count.py | grep 'Node count test passed' && python3 ../examples/features/data_parallel/data_parallel_offline.py -dp=2 -tp=1 --dp-num-nodes=2 --dp-node-rank=0 --dp-master-addr=192.168.10.10 --dp-master-port=12345 --enforce-eager --trust-remote-code && VLLM_MULTI_NODE=1 pytest -v -s distributed/test_multi_node_assignment.py && VLLM_MULTI_NODE=1 pytest -v -s distributed/test_pipeline_parallel.py" "VLLM_TEST_SAME_HOST=0 torchrun --nnodes 2 --nproc-per-node=2 --rdzv_backend=c10d --rdzv_endpoint=192.168.10.10 distributed/test_same_node.py | grep 'Same node test passed' && NUM_NODES=2 torchrun --nnodes 2 --nproc-per-node=2 --rdzv_backend=c10d --rdzv_endpoint=192.168.10.10 distributed/test_node_count.py | grep 'Node count test passed' && python3 ../examples/features/data_parallel/data_parallel_offline.py -dp=2 -tp=1 --dp-num-nodes=2 --dp-node-rank=1 --dp-master-addr=192.168.10.10 --dp-master-port=12345 --enforce-eager --trust-remote-code"
+    - ./.buildkite/scripts/run-multi-node-test.sh /vllm-workspace/tests 2 2 $IMAGE_TAG "VLLM_TEST_SAME_HOST=0 torchrun --nnodes 2 --nproc-per-node=2 --rdzv_backend=c10d --rdzv_endpoint=192.168.10.10 distributed/test_same_node.py | grep 'Same node test passed' && NUM_NODES=2 torchrun --nnodes 2 --nproc-per-node=2 --rdzv_backend=c10d --rdzv_endpoint=192.168.10.10 distributed/test_node_count.py | grep 'Node count test passed' && python3 ../examples/offline_inference/data_parallel.py -dp=2 -tp=1 --dp-num-nodes=2 --dp-node-rank=0 --dp-master-addr=192.168.10.10 --dp-master-port=12345 --enforce-eager --trust-remote-code && VLLM_MULTI_NODE=1 pytest -v -s distributed/test_multi_node_assignment.py && VLLM_MULTI_NODE=1 pytest -v -s distributed/test_pipeline_parallel.py" "VLLM_TEST_SAME_HOST=0 torchrun --nnodes 2 --nproc-per-node=2 --rdzv_backend=c10d --rdzv_endpoint=192.168.10.10 distributed/test_same_node.py | grep 'Same node test passed' && NUM_NODES=2 torchrun --nnodes 2 --nproc-per-node=2 --rdzv_backend=c10d --rdzv_endpoint=192.168.10.10 distributed/test_node_count.py | grep 'Node count test passed' && python3 ../examples/offline_inference/data_parallel.py -dp=2 -tp=1 --dp-num-nodes=2 --dp-node-rank=1 --dp-master-addr=192.168.10.10 --dp-master-port=12345 --enforce-eager --trust-remote-code"
+
+- label: Distributed NixlConnector PD accuracy (4 GPUs)
+  timeout_in_minutes: 30
+  working_dir: "/vllm-workspace/tests"
+  num_devices: 4
+  source_file_dependencies:
+    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
+    - tests/v1/kv_connector/nixl_integration/
+  commands:
+    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
+    - bash v1/kv_connector/nixl_integration/config_sweep_accuracy_test.sh
+
+- label: DP EP Distributed NixlConnector PD accuracy tests (4 GPUs)
+  timeout_in_minutes: 30
+  working_dir: "/vllm-workspace/tests"
+  num_devices: 4
+  source_file_dependencies:
+    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
+    - tests/v1/kv_connector/nixl_integration/
+  commands:
+    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
+    - DP_EP=1 bash v1/kv_connector/nixl_integration/config_sweep_accuracy_test.sh
+
+- label: CrossLayer KV layout Distributed NixlConnector PD accuracy tests (4 GPUs)
+  timeout_in_minutes: 30
+  working_dir: "/vllm-workspace/tests"
+  num_devices: 4
+  source_file_dependencies:
+    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
+    - tests/v1/kv_connector/nixl_integration/
+  commands:
+    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
+    - CROSS_LAYERS_BLOCKS=True bash v1/kv_connector/nixl_integration/config_sweep_accuracy_test.sh
+
+- label: Hyrbid SSM NixlConnector PD accuracy tests (4 GPUs)
+  timeout_in_minutes: 20
+  working_dir: "/vllm-workspace/tests"
+  num_devices: 4
+  source_file_dependencies:
+    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
+    - tests/v1/kv_connector/nixl_integration/
+  commands:
+    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
+    - HYBRID_SSM=1 bash v1/kv_connector/nixl_integration/config_sweep_accuracy_test.sh
+
+- label: NixlConnector PD + Spec Decode acceptance (2 GPUs)
+  timeout_in_minutes: 30
+  device: a100
+  working_dir: "/vllm-workspace/tests"
+  num_devices: 2
+  source_file_dependencies:
+    - vllm/distributed/kv_transfer/kv_connector/v1/nixl_connector.py
+    - vllm/v1/worker/kv_connector_model_runner_mixin.py
+    - tests/v1/kv_connector/nixl_integration/
+  commands:
+    - uv pip install --system -r /vllm-workspace/requirements/kv_connectors.txt
+    - bash v1/kv_connector/nixl_integration/spec_decode_acceptance_test.sh
 
 - label: Pipeline + Context Parallelism (4 GPUs)
-  key: pipeline-context-parallelism-4-gpus
   timeout_in_minutes: 60
   working_dir: "/vllm-workspace/tests"
   num_devices: 4
@@ -256,24 +294,3 @@ steps:
   commands:
   - pytest -v -s distributed/test_pp_cudagraph.py
   - pytest -v -s distributed/test_pipeline_parallel.py
-
-- label: RayExecutorV2 (4 GPUs)
-  key: rayexecutorv2-4-gpus
-  timeout_in_minutes: 60
-  working_dir: "/vllm-workspace/tests"
-  num_devices: 4
-  source_file_dependencies:
-  - vllm/v1/executor/ray_executor_v2.py
-  - vllm/v1/executor/abstract.py
-  - vllm/v1/executor/multiproc_executor.py
-  - tests/distributed/test_ray_v2_executor.py
-  - tests/distributed/test_ray_v2_executor_e2e.py
-  - tests/distributed/test_pipeline_parallel.py
-  - tests/basic_correctness/test_basic_correctness.py
-  commands:
-  - export VLLM_USE_RAY_V2_EXECUTOR_BACKEND=1
-  - export NCCL_CUMEM_HOST_ENABLE=0
-  - pytest -v -s distributed/test_ray_v2_executor.py
-  - pytest -v -s distributed/test_ray_v2_executor_e2e.py
-  - pytest -v -s distributed/test_pipeline_parallel.py -k "ray"
-  - TARGET_TEST_SUITE=L4 pytest -v -s basic_correctness/test_basic_correctness.py -k "ray"

.buildkite/test_areas/docker.yaml

@@ -1,16 +0,0 @@
-group: Docker
-depends_on:
-  - image-build-cpu
-steps:
-- label: Docker Build Metadata
-  timeout_in_minutes: 10
-  device: cpu-small
-  source_file_dependencies:
-    - .buildkite/release-pipeline.yaml
-    - .buildkite/scripts/docker-build-metadata-args.sh
-    - docker/Dockerfile
-    - docker/Dockerfile.cpu
-    - docker/docker-bake.hcl
-    - tests/tools/test_docker_build_metadata_args.py
-  commands:
-    - pytest -v -s tools/test_docker_build_metadata_args.py

.buildkite/test_areas/e2e_integration.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: DeepSeek V2-Lite Accuracy
-  key: deepseek-v2-lite-accuracy
   timeout_in_minutes: 60
   device: h100
   optional: true
@@ -13,7 +12,6 @@ steps:
   - bash .buildkite/scripts/scheduled_integration_test/deepseek_v2_lite_ep_eplb.sh 0.25 200 8010
 
 - label: Qwen3-30B-A3B-FP8-block Accuracy
-  key: qwen3-30b-a3b-fp8-block-accuracy
   timeout_in_minutes: 60
   device: h100
   optional: true
@@ -23,7 +21,6 @@ steps:
   - bash .buildkite/scripts/scheduled_integration_test/qwen30b_a3b_fp8_block_ep_eplb.sh 0.8 200 8020
 
 - label: Qwen3-30B-A3B-FP8-block Accuracy (B200)
-  key: qwen3-30b-a3b-fp8-block-accuracy-b200
   timeout_in_minutes: 60
   device: b200
   optional: true
@@ -32,18 +29,7 @@ steps:
   commands:
   - bash .buildkite/scripts/scheduled_integration_test/qwen30b_a3b_fp8_block_ep_eplb.sh 0.8 200 8020 2 1
 
-- label: Qwen3-30B-A3B-FP8 DP4 Async EPLB Accuracy
-  key: qwen3-30b-a3b-fp8-dp4-async-eplb-accuracy
-  timeout_in_minutes: 60
-  device: h100
-  optional: true
-  num_devices: 4
-  working_dir: "/vllm-workspace"
-  commands:
-  - bash .buildkite/scripts/scheduled_integration_test/qwen30b_a3b_fp8_dp4_async_eplb.sh 0.8 200 8050
-
 - label: DeepSeek V2-Lite Prefetch Offload Accuracy (H100)
-  key: deepseek-v2-lite-prefetch-offload-accuracy-h100
   timeout_in_minutes: 60
   device: h100
   optional: true

.buildkite/test_areas/engine.yaml

@@ -3,9 +3,7 @@ depends_on:
   - image-build
 steps:
 - label: Engine
-  key: engine
   timeout_in_minutes: 15
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/engine
@@ -17,7 +15,6 @@ steps:
   - pytest -v -s engine test_sequence.py test_config.py test_logger.py test_vllm_port.py
 
 - label: Engine (1 GPU)
-  key: engine-1-gpu
   timeout_in_minutes: 30
   source_file_dependencies:
     - vllm/v1/engine/
@@ -27,9 +24,7 @@ steps:
     - pytest -v -s v1/engine --ignore v1/engine/test_preprocess_error_handling.py
 
 - label: e2e Scheduling (1 GPU)
-  key: e2e-scheduling-1-gpu
   timeout_in_minutes: 30
-  device: h200_18gb
   source_file_dependencies:
     - vllm/v1/
     - tests/v1/e2e/general/
@@ -37,7 +32,6 @@ steps:
     - pytest -v -s v1/e2e/general/test_async_scheduling.py
 
 - label: e2e Core (1 GPU)
-  key: e2e-core-1-gpu
   timeout_in_minutes: 30
   source_file_dependencies:
     - vllm/v1/
@@ -46,7 +40,6 @@ steps:
     - pytest -v -s v1/e2e/general --ignore v1/e2e/general/test_async_scheduling.py
 
 - label: V1 e2e (2 GPUs)
-  key: v1-e2e-2-gpus
   timeout_in_minutes: 60 # TODO: Fix timeout after we have more confidence in the test stability
   optional: true
   num_devices: 2
@@ -63,7 +56,6 @@ steps:
       - image-build-amd
 
 - label: V1 e2e (4 GPUs)
-  key: v1-e2e-4-gpus
   timeout_in_minutes: 60 # TODO: Fix timeout after we have more confidence in the test stability
   optional: true
   num_devices: 4
@@ -80,7 +72,6 @@ steps:
       - image-build-amd
 
 - label: V1 e2e (4xH100)
-  key: v1-e2e-4xh100
   timeout_in_minutes: 60
   device: h100
   num_devices: 4

.buildkite/test_areas/entrypoints.yaml

@@ -2,8 +2,7 @@ group: Entrypoints
 depends_on: 
   - image-build
 steps:
-- label: Entrypoints Unit Tests
-  key: entrypoints-unit-tests
+- label: Entrypoints Unit Tests  
   timeout_in_minutes: 10
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
@@ -14,7 +13,6 @@ steps:
   - pytest -v -s entrypoints/ --ignore=entrypoints/llm --ignore=entrypoints/rpc --ignore=entrypoints/sleep --ignore=entrypoints/serve/instrumentator --ignore=entrypoints/openai --ignore=entrypoints/offline_mode --ignore=entrypoints/test_chat_utils.py  --ignore=entrypoints/pooling
 
 - label: Entrypoints Integration (LLM)
-  key: entrypoints-integration-llm
   timeout_in_minutes: 40
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
@@ -28,7 +26,6 @@ steps:
   - pytest -v -s entrypoints/offline_mode # Needs to avoid interference with other tests
 
 - label: Entrypoints Integration (API Server openai - Part 1)
-  key: entrypoints-integration-api-server-openai-part-1
   timeout_in_minutes: 50
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
@@ -46,7 +43,6 @@ steps:
 
 
 - label: Entrypoints Integration (API Server openai - Part 2)
-  key: entrypoints-integration-api-server-openai-part-2
   timeout_in_minutes: 50
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
@@ -64,9 +60,7 @@ steps:
       - image-build-amd
 
 - label: Entrypoints Integration (API Server openai - Part 3)
-  key: entrypoints-integration-api-server-openai-part-3
   timeout_in_minutes: 50
-  device: h200_18gb
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
   - vllm/
@@ -77,7 +71,6 @@ steps:
   - pytest -v -s entrypoints/openai --ignore=entrypoints/openai/chat_completion --ignore=entrypoints/openai/completion --ignore=entrypoints/openai/speech_to_text/ --ignore=entrypoints/openai/correctness/ --ignore=entrypoints/openai/tool_parsers/ --ignore=entrypoints/openai/responses --ignore=entrypoints/openai/test_multi_api_servers.py
 
 - label: Entrypoints Integration (API Server 2)
-  key: entrypoints-integration-api-server-2
   timeout_in_minutes: 130
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
@@ -92,7 +85,6 @@ steps:
   - pytest -v -s tool_use
 
 - label: Entrypoints Integration (Pooling)
-  key: entrypoints-integration-pooling
   timeout_in_minutes: 50
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
@@ -103,7 +95,6 @@ steps:
   - pytest -v -s entrypoints/pooling
 
 - label: Entrypoints Integration (Responses API)
-  key: entrypoints-integration-responses-api
   timeout_in_minutes: 50
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
@@ -113,9 +104,7 @@ steps:
   - pytest -v -s entrypoints/openai/responses
 
 - label: OpenAI API Correctness
-  key: openai-api-correctness
   timeout_in_minutes: 30
-  device: h200_18gb
   source_file_dependencies:
   - csrc/
   - vllm/entrypoints/openai/

.buildkite/test_areas/expert_parallelism.yaml

@@ -3,9 +3,7 @@ depends_on:
   - image-build
 steps:
 - label: EPLB Algorithm
-  key: eplb-algorithm
   timeout_in_minutes: 15
-  device: h200_18gb
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
   - vllm/distributed/eplb
@@ -16,7 +14,6 @@ steps:
   - pytest -v -s distributed/test_eplb_utils.py
 
 - label: EPLB Execution # 17min
-  key: eplb-execution
   timeout_in_minutes: 27
   working_dir: "/vllm-workspace/tests"
   num_devices: 4
@@ -28,7 +25,6 @@ steps:
   - pytest -v -s distributed/test_eplb_spec_decode.py
 
 - label: Elastic EP Scaling Test
-  key: elastic-ep-scaling-test
   timeout_in_minutes: 20
   device: h100
   working_dir: "/vllm-workspace/tests"

.buildkite/test_areas/kernels.yaml

@@ -2,58 +2,29 @@ group: Kernels
 depends_on: 
   - image-build
 steps:
-- label: vLLM IR Tests
-  key: vllm-ir-tests
-  timeout_in_minutes: 10
-  device: h200_18gb
-  working_dir: "/vllm-workspace/"
-  source_file_dependencies:
-    - vllm/ir
-    - vllm/kernels
-  commands:
-    - pytest -v -s tests/ir
-    - pytest -v -s tests/kernels/ir
-
 - label: Kernels Core Operation Test
-  key: kernels-core-operation-test
   timeout_in_minutes: 75
   source_file_dependencies:
   - csrc/
   - tests/kernels/core
+  - tests/kernels/test_top_k_per_row.py
   - tests/kernels/test_concat_mla_q.py
   commands:
-    - pytest -v -s kernels/core --ignore=kernels/core/test_minimax_reduce_rms.py  kernels/test_concat_mla_q.py
-
-- label: Kernels MiniMax Reduce RMS Test (2 GPUs)
-  key: kernels-minimax-reduce-rms-test-2-gpus
-  timeout_in_minutes: 15
-  num_devices: 2
-  device: h100
-  source_file_dependencies:
-  - csrc/minimax_reduce_rms_kernel.cu
-  - csrc/minimax_reduce_rms_kernel.h
-  - vllm/model_executor/layers/mamba/linear_attn.py
-  - vllm/model_executor/layers/mamba/lamport_workspace.py
-  - tests/kernels/core/test_minimax_reduce_rms.py
-  commands:
-    - pytest -v -s kernels/core/test_minimax_reduce_rms.py
+    - pytest -v -s kernels/core kernels/test_top_k_per_row.py kernels/test_concat_mla_q.py
 
 - label: Kernels Attention Test %N
-  key: kernels-attention-test
   timeout_in_minutes: 35
   source_file_dependencies:
   - csrc/attention/
   - vllm/v1/attention
     # TODO: remove this dependency (https://github.com/vllm-project/vllm/issues/32267)
   - vllm/model_executor/layers/attention
-  - vllm/utils/flashinfer.py
   - tests/kernels/attention
   commands:
     - pytest -v -s kernels/attention --shard-id=$$BUILDKITE_PARALLEL_JOB --num-shards=$$BUILDKITE_PARALLEL_JOB_COUNT
   parallelism: 2
 
 - label: Kernels Quantization Test %N
-  key: kernels-quantization-test
   timeout_in_minutes: 90
   source_file_dependencies:
   - csrc/quantization/
@@ -64,7 +35,6 @@ steps:
   parallelism: 2
 
 - label: Kernels MoE Test %N
-  key: kernels-moe-test
   timeout_in_minutes: 25
   source_file_dependencies:
   - csrc/quantization/cutlass_w8a8/moe/
@@ -80,7 +50,6 @@ steps:
   parallelism: 5
 
 - label: Kernels Mamba Test
-  key: kernels-mamba-test
   timeout_in_minutes: 45
   source_file_dependencies:
   - csrc/mamba/
@@ -89,18 +58,7 @@ steps:
   commands:
     - pytest -v -s kernels/mamba
 
-- label: Kernels KDA Test
-  timeout_in_minutes: 20
-  source_file_dependencies:
-  - vllm/model_executor/layers/fla/ops/kda.py
-  - vllm/model_executor/layers/fla/ops/chunk_delta_h.py
-  - vllm/model_executor/layers/fla/ops/l2norm.py
-  - tests/kernels/test_kda.py
-  commands:
-    - pytest -v -s kernels/test_kda.py
-
 - label: Kernels DeepGEMM Test (H100)
-  key: kernels-deepgemm-test-h100
   timeout_in_minutes: 45
   device: h100
   num_devices: 1
@@ -113,16 +71,13 @@ steps:
   - tests/kernels/moe/test_deepgemm.py
   - tests/kernels/moe/test_batched_deepgemm.py
   - tests/kernels/attention/test_deepgemm_attention.py
-  - tests/quantization/test_cutlass_w4a16.py
   commands:
     - pytest -v -s kernels/quantization/test_block_fp8.py
     - pytest -v -s kernels/moe/test_deepgemm.py
     - pytest -v -s kernels/moe/test_batched_deepgemm.py
     - pytest -v -s kernels/attention/test_deepgemm_attention.py
-    - pytest -v -s quantization/test_cutlass_w4a16.py
 
 - label: Kernels (B200)
-  key: kernels-b200
   timeout_in_minutes: 30
   working_dir: "/vllm-workspace/"
   device: b200
@@ -140,7 +95,6 @@ steps:
   - vllm/v1/attention/backends/mla/flashinfer_mla.py
   - vllm/v1/attention/selector.py
   - vllm/platforms/cuda.py
-  - tests/kernels/test_top_k_per_row.py
   commands:
     - nvidia-smi
     - python3 examples/basic/offline_inference/chat.py
@@ -151,7 +105,6 @@ steps:
     - pytest -v -s tests/kernels/attention/test_flashinfer_trtllm_attention.py
     - pytest -v -s tests/kernels/attention/test_cutlass_mla_decode.py
     - pytest -v -s tests/kernels/attention/test_flashinfer_mla_decode.py
-    - pytest -v -s tests/kernels/test_top_k_per_row.py
     # Quantization
     - pytest -v -s tests/kernels/quantization/test_cutlass_scaled_mm.py -k 'fp8'
     - pytest -v -s tests/kernels/quantization/test_nvfp4_quant.py
@@ -162,7 +115,6 @@ steps:
     - pytest -v -s tests/kernels/quantization/test_nvfp4_qutlass.py
     - pytest -v -s tests/kernels/quantization/test_mxfp4_qutlass.py
     - pytest -v -s tests/kernels/moe/test_nvfp4_moe.py
-    - pytest -v -s tests/kernels/moe/test_mxfp4_moe.py
     - pytest -v -s tests/kernels/moe/test_ocp_mx_moe.py
     - pytest -v -s tests/kernels/moe/test_flashinfer.py
     - pytest -v -s tests/kernels/moe/test_flashinfer_moe.py
@@ -171,19 +123,17 @@ steps:
     - pytest -v -s tests/models/quantization/test_nvfp4.py
 
 - label: Kernels Helion Test
-  key: kernels-helion-test
   timeout_in_minutes: 30
   device: h100
   source_file_dependencies:
   - vllm/utils/import_utils.py
   - tests/kernels/helion/
   commands:
-    - pip install helion==1.0.0
+    - pip install helion
     - pytest -v -s kernels/helion/
 
  
 - label: Kernels FP8 MoE Test (1 H100)
-  key: kernels-fp8-moe-test-1-h100
   timeout_in_minutes: 90
   device: h100
   num_devices: 1
@@ -200,7 +150,6 @@ steps:
     - pytest -v -s kernels/moe/test_triton_moe_ptpc_fp8.py
 
 - label: Kernels FP8 MoE Test (2 H100s)
-  key: kernels-fp8-moe-test-2-h100s
   timeout_in_minutes: 90
   device: h100
   num_devices: 2
@@ -210,7 +159,6 @@ steps:
     - pytest -v -s kernels/moe/test_deepep_moe.py
 
 - label: Kernels Fp4 MoE Test (B200)
-  key: kernels-fp4-moe-test-b200
   timeout_in_minutes: 60
   device: b200
   num_devices: 1
@@ -220,37 +168,3 @@ steps:
     - pytest -v -s kernels/moe/test_flashinfer_moe.py
     - pytest -v -s kernels/moe/test_nvfp4_moe.py
     - pytest -v -s kernels/moe/test_ocp_mx_moe.py
-
-
-- label: Kernels FusedMoE Layer Test (2 H100s)
-  key: kernels-fusedmoe-layer-test-2-h100s
-  timeout_in_minutes: 90
-  device: h100
-  num_devices: 2
-  source_file_dependencies:
-  - csrc/quantization/cutlass_w8a8/moe/
-  - csrc/moe/
-  - tests/kernels/moe
-  - vllm/model_executor/layers/fused_moe/
-  - vllm/model_executor/layers/quantization/
-  - vllm/distributed/device_communicators/
-  - vllm/config
-  commands:
-    - pytest -v -s kernels/moe/test_moe_layer.py
-
-
-- label: Kernels FusedMoE Layer Test (2 B200s)
-  key: kernels-fusedmoe-layer-test-2-b200s
-  timeout_in_minutes: 90
-  device: b200
-  num_devices: 2
-  source_file_dependencies:
-  - csrc/quantization/cutlass_w8a8/moe/
-  - csrc/moe/
-  - tests/kernels/moe
-  - vllm/model_executor/layers/fused_moe/
-  - vllm/model_executor/layers/quantization/
-  - vllm/distributed/device_communicators/
-  - vllm/config
-  commands:
-    - pytest -v -s kernels/moe/test_moe_layer.py

.buildkite/test_areas/lm_eval.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: LM Eval Small Models
-  key: lm-eval-small-models
   timeout_in_minutes: 75
   source_file_dependencies:
   - csrc/
@@ -25,7 +24,6 @@ steps:
 #   - pytest -s -v test_lm_eval_correctness.py --config-list-file=configs/models-large.txt --tp-size=4
 
 - label: LM Eval Large Models (4 GPUs)(H100)
-  key: lm-eval-large-models-4-gpus-h100
   device: h100
   optional: true
   num_devices: 4
@@ -38,7 +36,6 @@ steps:
     - pytest -s -v test_lm_eval_correctness.py --config-list-file=configs/models-large-hopper.txt --tp-size=4
 
 - label: LM Eval Small Models (B200)
-  key: lm-eval-small-models-b200
   timeout_in_minutes: 120
   device: b200
   optional: true
@@ -49,7 +46,6 @@ steps:
   - pytest -s -v evals/gsm8k/test_gsm8k_correctness.py --config-list-file=configs/models-blackwell.txt
 
 - label: LM Eval Qwen3.5 Models (B200)
-  key: lm-eval-qwen3-5-models-b200
   timeout_in_minutes: 120
   device: b200
   optional: true
@@ -66,7 +62,6 @@ steps:
   - pytest -s -v evals/gsm8k/test_gsm8k_correctness.py --config-list-file=configs/models-qwen35-blackwell.txt
 
 - label: LM Eval Large Models (H200)
-  key: lm-eval-large-models-h200
   timeout_in_minutes: 60
   device: h200
   optional: true
@@ -75,7 +70,6 @@ steps:
     - pytest -s -v evals/gsm8k/test_gsm8k_correctness.py --config-list-file=configs/models-h200.txt
 
 - label: MoE Refactor Integration Test (H100 - TEMPORARY)
-  key: moe-refactor-integration-test-h100-temporary
   device: h100
   optional: true
   num_devices: 2
@@ -83,7 +77,6 @@ steps:
     - pytest -s -v evals/gsm8k/test_gsm8k_correctness.py --config-list-file=evals/gsm8k/configs/moe-refactor/config-h100.txt
   
 - label: MoE Refactor Integration Test (B200 - TEMPORARY)
-  key: moe-refactor-integration-test-b200-temporary
   device: b200
   optional: true
   num_devices: 2
@@ -91,7 +84,6 @@ steps:
     - pytest -s -v evals/gsm8k/test_gsm8k_correctness.py --config-list-file=evals/gsm8k/configs/moe-refactor/config-b200.txt
 
 - label: MoE Refactor Integration Test (B200 DP - TEMPORARY)
-  key: moe-refactor-integration-test-b200-dp-temporary
   device: b200
   optional: true
   num_devices: 2
@@ -99,19 +91,7 @@ steps:
     - pytest -s -v evals/gsm8k/test_gsm8k_correctness.py --config-list-file=evals/gsm8k/configs/moe-refactor-dp-ep/config-b200.txt
 
 
-- label: LM Eval TurboQuant KV Cache
-  key: lm-eval-turboquant-kv-cache
-  timeout_in_minutes: 75
-  source_file_dependencies:
-  - vllm/model_executor/layers/quantization/turboquant/
-  - vllm/v1/attention/backends/turboquant_attn.py
-  - vllm/v1/attention/ops/triton_turboquant_decode.py
-  - vllm/v1/attention/ops/triton_turboquant_store.py
-  commands:
-  - pytest -s -v evals/gsm8k/test_gsm8k_correctness.py --config-list-file=evals/gsm8k/configs/models-turboquant.txt
-
 - label: GPQA Eval (GPT-OSS) (H100)
-  key: gpqa-eval-gpt-oss-h100
   timeout_in_minutes: 120
   device: h100
   optional: true
@@ -125,7 +105,6 @@ steps:
     - pytest -s -v evals/gpt_oss/test_gpqa_correctness.py --config-list-file=configs/models-h100.txt
 
 - label: GPQA Eval (GPT-OSS) (B200)
-  key: gpqa-eval-gpt-oss-b200
   timeout_in_minutes: 120
   device: b200
   optional: true

.buildkite/test_areas/lora.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: LoRA %N
-  key: lora
   timeout_in_minutes: 30
   source_file_dependencies:
   - vllm/lora
@@ -14,7 +13,6 @@ steps:
 
 
 - label: LoRA TP (Distributed)
-  key: lora-tp-distributed
   timeout_in_minutes: 30
   num_devices: 4
   source_file_dependencies:

.buildkite/test_areas/misc.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: V1 Spec Decode
-  key: v1-spec-decode
   timeout_in_minutes: 30
   source_file_dependencies:
     - vllm/
@@ -19,9 +18,7 @@ steps:
       - image-build-amd
 
 - label: V1 Sample + Logits
-  key: v1-sample-logits
   timeout_in_minutes: 30
-  device: h200_18gb
   source_file_dependencies:
     - vllm/
     - tests/v1/sample
@@ -43,7 +40,6 @@ steps:
       - image-build-amd
 
 - label: V1 Core + KV + Metrics
-  key: v1-core-kv-metrics
   timeout_in_minutes: 30
   source_file_dependencies:
     - vllm/
@@ -74,7 +70,6 @@ steps:
       - image-build-amd
 
 - label: V1 Others (CPU)
-  key: v1-others-cpu
   depends_on:
     - image-build-cpu
   source_file_dependencies:
@@ -90,9 +85,7 @@ steps:
     - pytest -v -s -m 'cpu_test' v1/metrics
 
 - label: Regression
-  key: regression
   timeout_in_minutes: 20
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/test_regression
@@ -102,7 +95,6 @@ steps:
   working_dir: "/vllm-workspace/tests" # optional
 
 - label: Examples
-  key: examples
   timeout_in_minutes: 45
   working_dir: "/vllm-workspace/examples"
   source_file_dependencies:
@@ -119,22 +111,21 @@ steps:
     - python3 basic/offline_inference/embed.py
     - python3 basic/offline_inference/score.py
     # for multi-modal models
-    - python3 generate/multimodal/audio_language_offline.py --seed 0
-    - python3 generate/multimodal/vision_language_offline.py --seed 0
-    - python3 generate/multimodal/vision_language_multi_image_offline.py --seed 0
-    - python3 generate/multimodal/encoder_decoder_multimodal_offline.py --model-type whisper --seed 0
+    - python3 offline_inference/audio_language.py --seed 0
+    - python3 offline_inference/vision_language.py --seed 0
+    - python3 offline_inference/vision_language_multi_image.py --seed 0
+    - python3 offline_inference/encoder_decoder_multimodal.py --model-type whisper --seed 0
      # for pooling models
     - python3 pooling/embed/vision_embedding_offline.py --seed 0
     # for features demo
-    - python3 features/automatic_prefix_caching/prefix_caching_offline.py
+    - python3 offline_inference/prefix_caching.py
     - python3 offline_inference/llm_engine_example.py
     - python3 others/tensorize_vllm_model.py --model facebook/opt-125m serialize --serialized-directory /tmp/ --suffix v1 && python3 others/tensorize_vllm_model.py --model facebook/opt-125m deserialize --path-to-tensors /tmp/vllm/facebook/opt-125m/v1/model.tensors
-    - python3 features/speculative_decoding/spec_decode_offline.py --test --method eagle --num_spec_tokens 3 --dataset-name hf --dataset-path philschmid/mt-bench --num-prompts 80 --temp 0 --top-p 1.0 --top-k -1 --tp 1 --enable-chunked-prefill --max-model-len 2048
+    - python3 offline_inference/spec_decode.py --test --method eagle --num_spec_tokens 3 --dataset-name hf --dataset-path philschmid/mt-bench --num-prompts 80 --temp 0 --top-p 1.0 --top-k -1 --tp 1 --enable-chunked-prefill --max-model-len 2048
     # https://github.com/vllm-project/vllm/pull/26682 uses slightly more memory in PyTorch 2.9+ causing this test to OOM in 1xL4 GPU
-    - python3 features/speculative_decoding/spec_decode_offline.py --test --method eagle3 --num_spec_tokens 3 --dataset-name hf --dataset-path philschmid/mt-bench --num-prompts 80 --temp 0 --top-p 1.0 --top-k -1 --tp 1 --enable-chunked-prefill --max-model-len 1536
+    - python3 offline_inference/spec_decode.py --test --method eagle3 --num_spec_tokens 3 --dataset-name hf --dataset-path philschmid/mt-bench --num-prompts 80 --temp 0 --top-p 1.0 --top-k -1 --tp 1 --enable-chunked-prefill --max-model-len 1536
 
 - label: Metrics, Tracing (2 GPUs)
-  key: metrics-tracing-2-gpus
   timeout_in_minutes: 20
   num_devices: 2
   source_file_dependencies:
@@ -149,7 +140,6 @@ steps:
   - pytest -v -s v1/tracing
 
 - label: Python-only Installation
-  key: python-only-installation
   depends_on: ~
   timeout_in_minutes: 20
   source_file_dependencies:
@@ -159,7 +149,6 @@ steps:
   - bash standalone_tests/python_only_compile.sh
 
 - label: Async Engine, Inputs, Utils, Worker
-  key: async-engine-inputs-utils-worker
   timeout_in_minutes: 50
   source_file_dependencies:
   - vllm/
@@ -172,8 +161,7 @@ steps:
   - pytest -v -s utils_
 
 - label: Async Engine, Inputs, Utils, Worker, Config (CPU)
-  key: async-engine-inputs-utils-worker-config-cpu
-  depends_on:
+  depends_on: 
   - image-build-cpu
   timeout_in_minutes: 30
   source_file_dependencies:
@@ -186,7 +174,6 @@ steps:
   - tests/renderers
   - tests/standalone_tests/lazy_imports.py
   - tests/tokenizers_
-  - tests/reasoning
   - tests/tool_parsers
   - tests/transformers_utils
   - tests/config
@@ -200,13 +187,11 @@ steps:
   - pytest -v -s -m 'cpu_test' multimodal
   - pytest -v -s renderers
   - pytest -v -s tokenizers_
-  - pytest -v -s reasoning --ignore=reasoning/test_seedoss_reasoning_parser.py --ignore=reasoning/test_glm4_moe_reasoning_parser.py --ignore=reasoning/test_gemma4_reasoning_parser.py
   - pytest -v -s tool_parsers
   - pytest -v -s transformers_utils
   - pytest -v -s config
 
 - label: Batch Invariance (H100)
-  key: batch-invariance-h100
   timeout_in_minutes: 30
   device: h100
   source_file_dependencies:
@@ -222,7 +207,6 @@ steps:
     - VLLM_TEST_MODEL=Qwen/Qwen3-30B-A3B-Thinking-2507-FP8 pytest -v -s v1/determinism/test_batch_invariance.py::test_v1_generation_is_deterministic_across_batch_sizes_with_needle[FLASH_ATTN]
 
 - label: Batch Invariance (B200)
-  key: batch-invariance-b200
   timeout_in_minutes: 30
   device: b200
   source_file_dependencies:
@@ -236,10 +220,8 @@ steps:
     - pytest -v -s v1/determinism/test_rms_norm_batch_invariant.py
     - VLLM_TEST_MODEL=deepseek-ai/DeepSeek-V2-Lite-Chat pytest -v -s v1/determinism/test_batch_invariance.py::test_v1_generation_is_deterministic_across_batch_sizes_with_needle[TRITON_MLA]
     - VLLM_TEST_MODEL=Qwen/Qwen3-30B-A3B-Thinking-2507-FP8 pytest -v -s v1/determinism/test_batch_invariance.py::test_v1_generation_is_deterministic_across_batch_sizes_with_needle[FLASH_ATTN]
-    - pytest -v -s v1/determinism/test_nvfp4_batch_invariant.py
   
 - label: Acceptance Length Test (Large Models) # optional
-  key: acceptance-length-test-large-models
   timeout_in_minutes: 25
   gpu: h100
   optional: true

.buildkite/test_areas/model_executor.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: Model Executor
-  key: model-executor
   timeout_in_minutes: 35
   source_file_dependencies:
   - vllm/engine/arg_utils.py

.buildkite/test_areas/model_runner_v2.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: Model Runner V2 Core Tests
-  key: model-runner-v2-core-tests
   timeout_in_minutes: 45
   source_file_dependencies:
   - vllm/v1/worker/gpu/
@@ -26,16 +25,14 @@ steps:
   - pytest -v -s entrypoints/llm/test_struct_output_generate.py -k "xgrammar and not speculative_config6 and not speculative_config7 and not speculative_config8 and not speculative_config0"
 
 - label: Model Runner V2 Examples
-  key: model-runner-v2-examples
   timeout_in_minutes: 45
   working_dir: "/vllm-workspace/examples"
   source_file_dependencies:
     - vllm/v1/worker/gpu/
     - vllm/v1/core/sched/
     - vllm/v1/worker/gpu_worker.py
+    - examples/offline_inference/
     - examples/basic/offline_inference/
-    - examples/generate/multimodal/
-    - examples/features/
     - examples/pooling/embed/vision_embedding_offline.py
     - examples/others/tensorize_vllm_model.py
   commands:
@@ -47,22 +44,21 @@ steps:
     #- python3 basic/offline_inference/generate.py --model meta-llama/Llama-2-13b-chat-hf --cpu-offload-gb 10  # TODO
     #- python3 basic/offline_inference/embed.py   # TODO
     # for multi-modal models
-    - python3 generate/multimodal/audio_language_offline.py --seed 0
-    - python3 generate/multimodal/vision_language_offline.py --seed 0
-    - python3 generate/multimodal/vision_language_multi_image_offline.py --seed 0
-    - python3 generate/multimodal/encoder_decoder_multimodal_offline.py --model-type whisper --seed 0
+    - python3 offline_inference/audio_language.py --seed 0
+    - python3 offline_inference/vision_language.py --seed 0
+    - python3 offline_inference/vision_language_multi_image.py --seed 0
+    - python3 offline_inference/encoder_decoder_multimodal.py --model-type whisper --seed 0
     # for pooling models
     - python3 pooling/embed/vision_embedding_offline.py --seed 0
     # for features demo
-    - python3 features/automatic_prefix_caching/prefix_caching_offline.py
+    - python3 offline_inference/prefix_caching.py
     - python3 offline_inference/llm_engine_example.py
     - python3 others/tensorize_vllm_model.py --model facebook/opt-125m serialize --serialized-directory /tmp/ --suffix v1 && python3 others/tensorize_vllm_model.py --model facebook/opt-125m deserialize --path-to-tensors /tmp/vllm/facebook/opt-125m/v1/model.tensors
-    - python3 features/speculative_decoding/spec_decode_offline.py --test --method eagle --num_spec_tokens 3 --dataset-name hf --dataset-path philschmid/mt-bench --num-prompts 80 --temp 0 --top-p 1.0 --top-k -1 --tp 1 --enable-chunked-prefill --max-model-len 2048
+    - python3 offline_inference/spec_decode.py --test --method eagle --num_spec_tokens 3 --dataset-name hf --dataset-path philschmid/mt-bench --num-prompts 80 --temp 0 --top-p 1.0 --top-k -1 --tp 1 --enable-chunked-prefill --max-model-len 2048
     # https://github.com/vllm-project/vllm/pull/26682 uses slightly more memory in PyTorch 2.9+ causing this test to OOM in 1xL4 GPU
-    - python3 features/speculative_decoding/spec_decode_offline.py --test --method eagle3 --num_spec_tokens 3 --dataset-name hf --dataset-path philschmid/mt-bench --num-prompts 80 --temp 0 --top-p 1.0 --top-k -1 --tp 1 --enable-chunked-prefill --max-model-len 1536
+    - python3 offline_inference/spec_decode.py --test --method eagle3 --num_spec_tokens 3 --dataset-name hf --dataset-path philschmid/mt-bench --num-prompts 80 --temp 0 --top-p 1.0 --top-k -1 --tp 1 --enable-chunked-prefill --max-model-len 1536
 
 - label: Model Runner V2 Distributed (2 GPUs)
-  key: model-runner-v2-distributed-2-gpus
   timeout_in_minutes: 45
   working_dir: "/vllm-workspace/tests"
   num_devices: 2
@@ -82,8 +78,8 @@ steps:
     - TP_SIZE=1 DP_SIZE=2 pytest -v -s v1/distributed/test_async_llm_dp.py -k "not ray"
     - TP_SIZE=1 DP_SIZE=2 pytest -v -s v1/distributed/test_eagle_dp.py
 
+# These require fix https://github.com/vllm-project/vllm/pull/36280
 - label: Model Runner V2 Pipeline Parallelism (4 GPUs)
-  key: model-runner-v2-pipeline-parallelism-4-gpus
   timeout_in_minutes: 60
   working_dir: "/vllm-workspace/tests"
   num_devices: 4
@@ -99,20 +95,17 @@ steps:
     - pytest -v -s distributed/test_pp_cudagraph.py -k "not ray"
 
 - label: Model Runner V2 Spec Decode
-  key: model-runner-v2-spec-decode
   timeout_in_minutes: 30
   working_dir: "/vllm-workspace/tests"
   source_file_dependencies:
   - vllm/v1/worker/gpu/
   - vllm/v1/worker/gpu_worker.py
   - tests/v1/spec_decode/test_max_len.py
-  - tests/v1/spec_decode/test_probabilistic_rejection_sampler_utils.py
   - tests/v1/spec_decode/test_synthetic_rejection_sampler_utils.py
   - tests/v1/e2e/spec_decode/test_spec_decode.py
   commands:
   - set -x
   - export VLLM_USE_V2_MODEL_RUNNER=1
   - pytest -v -s v1/spec_decode/test_max_len.py -k "eagle or mtp"
-  - pytest -v -s v1/spec_decode/test_probabilistic_rejection_sampler_utils.py
   - pytest -v -s v1/spec_decode/test_synthetic_rejection_sampler_utils.py
   - pytest -v -s v1/e2e/spec_decode/test_spec_decode.py -k "eagle or mtp"

.buildkite/test_areas/models_basic.yaml

@@ -1,9 +1,8 @@
 group: Models - Basic
-depends_on:
+depends_on: 
   - image-build
 steps:
 - label: Basic Models Tests (Initialization)
-  key: basic-models-tests-initialization
   timeout_in_minutes: 45
   torch_nightly: true
   source_file_dependencies:
@@ -13,12 +12,10 @@ steps:
   commands:
     # Run a subset of model initialization tests
     - pytest -v -s models/test_initialization.py::test_can_initialize_small_subset
-  mirror:
-    torch_nightly: {}
 
 - label: Basic Models Tests (Extra Initialization) %N
-  key: basic-models-tests-extra-initialization
   timeout_in_minutes: 45
+  torch_nightly: true
   source_file_dependencies:
   - vllm/model_executor/models/
   - tests/models/test_initialization.py
@@ -29,11 +26,8 @@ steps:
     # test.) Also run if model initialization test file is modified
     - pytest -v -s models/test_initialization.py -k 'not test_can_initialize_small_subset' --num-shards=$$BUILDKITE_PARALLEL_JOB_COUNT --shard-id=$$BUILDKITE_PARALLEL_JOB
   parallelism: 2
-  mirror:
-    torch_nightly: {}
 
 - label: Basic Models Tests (Other)
-  key: basic-models-tests-other
   timeout_in_minutes: 45
   source_file_dependencies:
   - vllm/
@@ -47,11 +41,10 @@ steps:
       device: mi325_1
       depends_on:
       - image-build-amd
-
+    
 
 - label: Basic Models Test (Other CPU) # 5min
-  key: basic-models-test-other-cpu
-  depends_on:
+  depends_on: 
   - image-build-cpu
   timeout_in_minutes: 10
   source_file_dependencies:
@@ -63,7 +56,6 @@ steps:
     - pytest -v -s models/test_utils.py models/test_vision.py
 
 - label: Transformers Nightly Models
-  key: transformers-nightly-models
   working_dir: "/vllm-workspace/"
   optional: true
   soft_fail: true
@@ -74,22 +66,6 @@ steps:
     - pytest -v -s tests/models/multimodal/processing/
     - pytest -v -s tests/models/multimodal/test_mapping.py
     - python3 examples/basic/offline_inference/chat.py
-    - python3 examples/generate/multimodal/vision_language_offline.py --model-type qwen2_5_vl
+    - python3 examples/offline_inference/vision_language.py --model-type qwen2_5_vl
     # Whisper needs spawn method to avoid deadlock
-    - VLLM_WORKER_MULTIPROC_METHOD=spawn python3 examples/generate/multimodal/audio_language_offline.py --model-type whisper
-
-- label: Transformers Backward Compatibility Models Test
-  key: transformers-backward-compatibility-models-test
-  working_dir: "/vllm-workspace/"
-  optional: true
-  soft_fail: true
-  commands:
-    - pip install transformers==4.57.5
-    - pytest -v -s tests/models/test_initialization.py
-    - pytest -v -s tests/models/test_transformers.py
-    - pytest -v -s tests/models/multimodal/processing/
-    - pytest -v -s tests/models/multimodal/test_mapping.py
-    - python3 examples/basic/offline_inference/chat.py
-    - python3 examples/generate/multimodal/vision_language_offline.py --model-type qwen2_5_vl
-    # Whisper needs spawn method to avoid deadlock
-    - VLLM_WORKER_MULTIPROC_METHOD=spawn python3 examples/generate/multimodal/audio_language_offline.py --model-type whisper
+    - VLLM_WORKER_MULTIPROC_METHOD=spawn python3 examples/offline_inference/audio_language.py --model-type whisper

.buildkite/test_areas/models_distributed.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: Distributed Model Tests (2 GPUs)
-  key: distributed-model-tests-2-gpus
   timeout_in_minutes: 50
   working_dir: "/vllm-workspace/tests"
   num_devices: 2
@@ -19,6 +18,5 @@ steps:
   # Avoid importing model tests that cause CUDA reinitialization error
   - pytest models/test_transformers.py -v -s -m 'distributed(num_gpus=2)'
   - pytest models/language -v -s -m 'distributed(num_gpus=2)'
-  - pytest models/multimodal/generation/test_phi4siglip.py -v -s -m 'distributed(num_gpus=2)'
-  - pytest models/multimodal -v -s -m 'distributed(num_gpus=2)' --ignore models/multimodal/generation/test_whisper.py --ignore models/multimodal/generation/test_phi4siglip.py
+  - pytest models/multimodal -v -s -m 'distributed(num_gpus=2)' --ignore models/multimodal/generation/test_whisper.py
   - VLLM_WORKER_MULTIPROC_METHOD=spawn pytest models/multimodal/generation/test_whisper.py -v -s -m 'distributed(num_gpus=2)'

.buildkite/test_areas/models_language.yaml

@@ -1,10 +1,10 @@
 group: Models - Language
-depends_on:
+depends_on: 
   - image-build
 steps:
 - label: Language Models Tests (Standard)
-  key: language-models-tests-standard
   timeout_in_minutes: 25
+  torch_nightly: true
   source_file_dependencies:
   - vllm/
   - tests/models/language
@@ -12,12 +12,10 @@ steps:
     # Test standard language models, excluding a subset of slow tests
     - pip freeze | grep -E 'torch'
     - pytest -v -s models/language -m 'core_model and (not slow_test)'
-  mirror:
-    torch_nightly: {}
 
 - label: Language Models Tests (Extra Standard) %N
-  key: language-models-tests-extra-standard
   timeout_in_minutes: 45
+  torch_nightly: true
   source_file_dependencies:
   - vllm/model_executor/models/
   - tests/models/language/pooling/test_embedding.py
@@ -29,12 +27,10 @@ steps:
     - pip freeze | grep -E 'torch'
     - pytest -v -s models/language -m 'core_model and slow_test' --num-shards=$$BUILDKITE_PARALLEL_JOB_COUNT --shard-id=$$BUILDKITE_PARALLEL_JOB
   parallelism: 2
-  mirror:
-    torch_nightly: {}
 
 - label: Language Models Tests (Hybrid) %N
-  key: language-models-tests-hybrid
   timeout_in_minutes: 75
+  torch_nightly: true
   source_file_dependencies:
   - vllm/
   - tests/models/language/generation
@@ -42,15 +38,12 @@ steps:
     # Install fast path packages for testing against transformers
     # Note: also needed to run plamo2 model in vLLM
     - uv pip install --system --no-build-isolation 'git+https://github.com/state-spaces/mamba@v2.3.0'
-    - uv pip install --system --no-build-isolation 'git+https://github.com/Dao-AILab/causal-conv1d@v1.6.0'
+    - uv pip install --system --no-build-isolation 'git+https://github.com/Dao-AILab/causal-conv1d@v1.5.2'
     # Shard hybrid language model tests
     - pytest -v -s models/language/generation -m hybrid_model --num-shards=$$BUILDKITE_PARALLEL_JOB_COUNT --shard-id=$$BUILDKITE_PARALLEL_JOB
   parallelism: 2
-  mirror:
-    torch_nightly: {}
 
 - label: Language Models Test (Extended Generation) # 80min
-  key: language-models-test-extended-generation
   timeout_in_minutes: 110
   optional: true
   source_file_dependencies:
@@ -60,7 +53,7 @@ steps:
     # Install fast path packages for testing against transformers
     # Note: also needed to run plamo2 model in vLLM
     - uv pip install --system --no-build-isolation 'git+https://github.com/state-spaces/mamba@v2.3.0'
-    - uv pip install --system --no-build-isolation 'git+https://github.com/Dao-AILab/causal-conv1d@v1.6.0'
+    - uv pip install --system --no-build-isolation 'git+https://github.com/Dao-AILab/causal-conv1d@v1.5.2'
     - pytest -v -s models/language/generation -m '(not core_model) and (not hybrid_model)'
   mirror:
     amd:
@@ -69,13 +62,11 @@ steps:
       - image-build-amd
       commands:
       - uv pip install --system --no-build-isolation 'git+https://github.com/AndreasKaratzas/mamba@fix-rocm-7.0-warp-size-constexpr'
-      - uv pip install --system --no-build-isolation 'git+https://github.com/Dao-AILab/causal-conv1d@v1.6.0'
+      - uv pip install --system --no-build-isolation 'git+https://github.com/Dao-AILab/causal-conv1d@v1.5.2'
       - pytest -v -s models/language/generation -m '(not core_model) and (not hybrid_model)'
 
 - label: Language Models Test (PPL)
-  key: language-models-test-ppl
   timeout_in_minutes: 110
-  device: h200_18gb
   optional: true
   source_file_dependencies:
   - vllm/
@@ -84,7 +75,6 @@ steps:
     - pytest -v -s models/language/generation_ppl_test
 
 - label: Language Models Test (Extended Pooling)  # 36min
-  key: language-models-test-extended-pooling
   timeout_in_minutes: 50
   optional: true
   source_file_dependencies:
@@ -99,9 +89,7 @@ steps:
       - image-build-amd
 
 - label: Language Models Test (MTEB)
-  key: language-models-test-mteb
   timeout_in_minutes: 110
-  device: h200_18gb
   optional: true
   source_file_dependencies:
   - vllm/

.buildkite/test_areas/models_multimodal.yaml

@@ -3,9 +3,7 @@ depends_on:
   - image-build
 steps:
 - label: "Multi-Modal Models (Standard) 1: qwen2"
-  key: multi-modal-models-standard-1-qwen2
   timeout_in_minutes: 45
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/models/multimodal
@@ -20,9 +18,7 @@ steps:
       - image-build-amd
 
 - label: "Multi-Modal Models (Standard) 2: qwen3 + gemma"
-  key: multi-modal-models-standard-2-qwen3-gemma
   timeout_in_minutes: 45
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/models/multimodal
@@ -30,7 +26,6 @@ steps:
     - pip install git+https://github.com/TIGER-AI-Lab/Mantis.git
     - pytest -v -s models/multimodal/generation/test_common.py -m core_model -k "qwen3 or gemma"
     - pytest -v -s models/multimodal/generation/test_qwen2_5_vl.py -m core_model
-    - pytest -v -s models/multimodal/generation/test_vit_cudagraph.py -m core_model
   mirror:
     amd:
       device: mi325_1
@@ -38,7 +33,6 @@ steps:
       - image-build-amd
 
 - label: "Multi-Modal Models (Standard) 3: llava + qwen2_vl"
-  key: multi-modal-models-standard-3-llava-qwen2-vl
   timeout_in_minutes: 45
   source_file_dependencies:
   - vllm/
@@ -54,15 +48,13 @@ steps:
       - image-build-amd
 
 - label: "Multi-Modal Models (Standard) 4: other + whisper"
-  key: multi-modal-models-standard-4-other-whisper
   timeout_in_minutes: 45
   source_file_dependencies:
   - vllm/
   - tests/models/multimodal
   commands:
     - pip install git+https://github.com/TIGER-AI-Lab/Mantis.git
-    - pytest -v -s models/multimodal -m core_model --ignore models/multimodal/generation/test_common.py --ignore models/multimodal/generation/test_ultravox.py --ignore models/multimodal/generation/test_qwen2_5_vl.py --ignore models/multimodal/generation/test_qwen2_vl.py --ignore models/multimodal/generation/test_whisper.py  --ignore models/multimodal/generation/test_memory_leak.py --ignore models/multimodal/processing
-    - pytest models/multimodal/generation/test_memory_leak.py -m core_model
+    - pytest -v -s models/multimodal -m core_model --ignore models/multimodal/generation/test_common.py --ignore models/multimodal/generation/test_ultravox.py --ignore models/multimodal/generation/test_qwen2_5_vl.py --ignore models/multimodal/generation/test_qwen2_vl.py --ignore models/multimodal/generation/test_whisper.py --ignore models/multimodal/processing
     - cd .. && VLLM_WORKER_MULTIPROC_METHOD=spawn pytest -v -s tests/models/multimodal/generation/test_whisper.py -m core_model  # Otherwise, mp_method="spawn" doesn't work
   mirror:
     amd:
@@ -71,8 +63,7 @@ steps:
       - image-build-amd
 
 - label: Multi-Modal Processor (CPU)
-  key: multi-modal-processor-cpu
-  depends_on:
+  depends_on: 
   - image-build-cpu
   timeout_in_minutes: 60
   source_file_dependencies:
@@ -85,9 +76,7 @@ steps:
     - pytest -v -s models/multimodal/processing --ignore models/multimodal/processing/test_tensor_schema.py
 
 - label: Multi-Modal Processor # 44min
-  key: multi-modal-processor
   timeout_in_minutes: 60
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/models/multimodal
@@ -97,7 +86,6 @@ steps:
     - pytest -v -s models/multimodal/processing/test_tensor_schema.py
 
 - label: Multi-Modal Accuracy Eval (Small Models) # 50min
-  key: multi-modal-accuracy-eval-small-models
   timeout_in_minutes: 70
   working_dir: "/vllm-workspace/.buildkite/lm-eval-harness"
   source_file_dependencies:
@@ -108,7 +96,6 @@ steps:
   - pytest -s -v test_lm_eval_correctness.py --config-list-file=configs/models-mm-small.txt --tp-size=1
 
 - label: Multi-Modal Models (Extended Generation 1)
-  key: multi-modal-models-extended-generation-1
   optional: true
   source_file_dependencies:
   - vllm/
@@ -125,7 +112,6 @@ steps:
       - image-build-amd
 
 - label: Multi-Modal Models (Extended Generation 2)
-  key: multi-modal-models-extended-generation-2
   optional: true
   source_file_dependencies:
   - vllm/
@@ -135,7 +121,6 @@ steps:
     - pytest -v -s models/multimodal/generation/test_common.py -m 'split(group=0) and not core_model'
 
 - label: Multi-Modal Models (Extended Generation 3)
-  key: multi-modal-models-extended-generation-3
   optional: true
   source_file_dependencies:
   - vllm/
@@ -145,9 +130,7 @@ steps:
     - pytest -v -s models/multimodal/generation/test_common.py -m 'split(group=1) and not core_model'
 
 - label: Multi-Modal Models (Extended Pooling)
-  key: multi-modal-models-extended-pooling
   optional: true
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/models/multimodal/pooling

.buildkite/test_areas/plugins.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: Plugin Tests (2 GPUs)
-  key: plugin-tests-2-gpus
   timeout_in_minutes: 60
   working_dir: "/vllm-workspace/tests"
   num_devices: 2

.buildkite/test_areas/pytorch.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: PyTorch Compilation Unit Tests
-  key: pytorch-compilation-unit-tests
   timeout_in_minutes: 10
   source_file_dependencies:
     - vllm/
@@ -19,7 +18,6 @@ steps:
   - "find compile/ -maxdepth 1 -name 'test_*.py' -print0 | xargs -0 -n1 -I{} pytest -s -v '{}'"
 
 - label: PyTorch Compilation Unit Tests (H100)
-  key: pytorch-compilation-unit-tests-h100
   timeout_in_minutes: 30
   device: h100
   num_devices: 1
@@ -30,7 +28,6 @@ steps:
   - "find compile/h100/ -name 'test_*.py' -print0 | xargs -0 -n1 -I{} pytest -s -v '{}'"
 
 - label: PyTorch Compilation Passes Unit Tests
-  key: pytorch-compilation-passes-unit-tests
   timeout_in_minutes: 20
   source_file_dependencies:
     - vllm/
@@ -39,7 +36,6 @@ steps:
   - pytest -s -v compile/passes --ignore compile/passes/distributed
 
 - label: PyTorch Fullgraph Smoke Test
-  key: pytorch-fullgraph-smoke-test
   timeout_in_minutes: 35
   source_file_dependencies:
   - vllm/
@@ -52,9 +48,7 @@ steps:
   - "find compile/fullgraph/ -name 'test_*.py' -not -name 'test_full_graph.py' -print0 | xargs -0 -n1 -I{} pytest -s -v '{}'"
 
 - label: PyTorch Fullgraph
-  key: pytorch-fullgraph
   timeout_in_minutes: 30
-  device: h200_18gb
   source_file_dependencies:
   - vllm/
   - tests/compile
@@ -63,13 +57,11 @@ steps:
   - pytest -v -s compile/fullgraph/test_full_graph.py -k 'not test_fp8_kv_scale_compile'
 
 - label: Pytorch Nightly Dependency Override Check # 2min
-  key: pytorch-nightly-dependency-override-check
   # if this test fails, it means the nightly torch version is not compatible with some
   # of the dependencies. Please check the error message and add the package to whitelist
   # in /vllm/tools/pre_commit/generate_nightly_torch_test.py
-  device: h200_18gb
   soft_fail: true
   source_file_dependencies:
-  - requirements/test/nightly-torch.txt
+  - requirements/nightly_torch_test.txt
   commands:
   - bash standalone_tests/pytorch_nightly_dependency.sh

.buildkite/test_areas/quantization.yaml

@@ -1,28 +1,26 @@
 group: Quantization
-depends_on:
+depends_on: 
   - image-build
 steps:
 - label: Quantization
-  key: quantization
   timeout_in_minutes: 90
   source_file_dependencies:
   - csrc/
   - vllm/model_executor/layers/quantization
   - tests/quantization
   commands:
-  # temporary install here since we need nightly, will move to requirements/test/cuda.in
+  # temporary install here since we need nightly, will move to requirements/test.in
   # after torchao 0.12 release, and pin a working version of torchao nightly here
 
   # since torchao nightly is only compatible with torch nightly currently
   # https://github.com/pytorch/ao/issues/2919, we'll have to skip new torchao tests for now
   # we can only upgrade after this is resolved
   # TODO(jerryzh168): resolve the above comment
-  - uv pip install --system torchao==0.17.0 --index-url https://download.pytorch.org/whl/cu130
+  - uv pip install --system torchao==0.14.1 --index-url https://download.pytorch.org/whl/cu129
   - uv pip install --system conch-triton-kernels
   - VLLM_TEST_FORCE_LOAD_FORMAT=auto pytest -v -s quantization/ --ignore quantization/test_blackwell_moe.py
 
 - label: Quantized MoE Test (B200)
-  key: quantized-moe-test-b200
   timeout_in_minutes: 60
   working_dir: "/vllm-workspace/"
   device: b200
@@ -40,7 +38,6 @@ steps:
     - pytest -s -v tests/quantization/test_blackwell_moe.py
 
 - label: Quantized Models Test
-  key: quantized-models-test
   timeout_in_minutes: 60
   source_file_dependencies:
   - vllm/model_executor/layers/quantization

.buildkite/test_areas/ray_compat.yaml

@@ -3,12 +3,10 @@ depends_on:
   - image-build
 steps:
 - label: Ray Dependency Compatibility Check
-  key: ray-dependency-compatibility-check
   # Informational only — does not block the pipeline.
   # If this fails, it means the PR introduces a dependency that
   # conflicts with Ray's dependency constraints.
   # See https://github.com/vllm-project/vllm/issues/33599
-  device: h200_18gb
   soft_fail: true
   timeout_in_minutes: 10
   source_file_dependencies:

.buildkite/test_areas/samplers.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: Samplers Test
-  key: samplers-test
   timeout_in_minutes: 75
   source_file_dependencies:
   - vllm/model_executor/layers
@@ -11,9 +10,7 @@ steps:
   - tests/samplers
   - tests/conftest.py
   commands:
-    # VLLM_USE_FLASHINFER_SAMPLER defaults to 1 now, so we need to pin both
-    # values explicitly to still cover the PyTorch-native (Triton) path.
-    - VLLM_USE_FLASHINFER_SAMPLER=0 pytest -v -s samplers
+    - pytest -v -s samplers
     - VLLM_USE_FLASHINFER_SAMPLER=1 pytest -v -s samplers
   mirror:
     amd:

.buildkite/test_areas/spec_decode.yaml

@@ -3,21 +3,7 @@ depends_on:
   - image-build
 steps:
 - label: Spec Decode Eagle
-  key: spec-decode-eagle
   timeout_in_minutes: 30
-  device: h200_18gb
-  source_file_dependencies:
-    - vllm/v1/spec_decode/
-    - vllm/v1/worker/gpu/spec_decode/
-    - tests/v1/e2e/spec_decode/
-  commands:
-    - pytest -v -s v1/e2e/spec_decode -k "eagle_correctness"
-
-- label: Spec Decode Eagle Nightly B200
-  key: spec-decode-eagle-nightly-b200
-  timeout_in_minutes: 30
-  device: b200
-  optional: true
   source_file_dependencies:
     - vllm/v1/spec_decode/
     - vllm/v1/worker/gpu/spec_decode/
@@ -26,9 +12,7 @@ steps:
     - pytest -v -s v1/e2e/spec_decode -k "eagle_correctness"
 
 - label: Spec Decode Speculators + MTP
-  key: spec-decode-speculators-mtp
   timeout_in_minutes: 30
-  device: h200_18gb
   source_file_dependencies:
     - vllm/v1/spec_decode/
     - vllm/v1/worker/gpu/spec_decode/
@@ -37,23 +21,8 @@ steps:
   commands:
     - pytest -v -s v1/e2e/spec_decode -k "speculators or mtp_correctness"
 
-- label: Spec Decode Speculators + MTP Nightly B200
-  key: spec-decode-speculators-mtp-nightly-b200
-  timeout_in_minutes: 30
-  device: b200
-  optional: true
-  source_file_dependencies:
-    - vllm/v1/spec_decode/
-    - vllm/v1/worker/gpu/spec_decode/
-    - vllm/transformers_utils/configs/speculators/
-    - tests/v1/e2e/spec_decode/
-  commands:
-    - pytest -v -s v1/e2e/spec_decode -k "speculators or mtp_correctness"
-  
 - label: Spec Decode Ngram + Suffix
-  key: spec-decode-ngram-suffix
   timeout_in_minutes: 30
-  device: h200_18gb
   source_file_dependencies:
     - vllm/v1/spec_decode/
     - vllm/v1/worker/gpu/spec_decode/
@@ -62,51 +31,10 @@ steps:
     - pytest -v -s v1/e2e/spec_decode -k "ngram or suffix"
 
 - label: Spec Decode Draft Model
-  key: spec-decode-draft-model
   timeout_in_minutes: 30
-  device: h200_18gb
   source_file_dependencies:
     - vllm/v1/spec_decode/
     - vllm/v1/worker/gpu/spec_decode/
     - tests/v1/e2e/spec_decode/
   commands:
     - pytest -v -s v1/e2e/spec_decode -k "draft_model or no_sync or batch_inference"
-
-- label: Spec Decode Draft Model Nightly B200
-  key: spec-decode-draft-model-nightly-b200
-  timeout_in_minutes: 30
-  device: b200
-  optional: true
-  source_file_dependencies:
-    - vllm/v1/spec_decode/
-    - vllm/v1/worker/gpu/spec_decode/
-    - tests/v1/e2e/spec_decode/
-  commands:
-    - pytest -v -s v1/e2e/spec_decode -k "draft_model or no_sync or batch_inference"
-
-- label: DFlash Speculators Correctness
-  key: dflash-speculators-correctness
-  timeout_in_minutes: 30
-  device: h100
-  optional: true
-  num_devices: 1
-  source_file_dependencies:
-    - vllm/v1/spec_decode/
-    - vllm/model_executor/models/qwen3_dflash.py
-    - tests/v1/spec_decode/test_speculators_dflash.py
-  commands:
-    - export VLLM_ALLOW_INSECURE_SERIALIZATION=1
-    - pytest -v -s v1/spec_decode/test_speculators_dflash.py -m slow_test
-
-- label: Spec Decode MTP hybrid (B200)
-  timeout_in_minutes: 30
-  device: b200
-  optional: true
-  source_file_dependencies:
-    - vllm/v1/spec_decode/
-    - vllm/v1/worker/gpu/spec_decode/
-    - vllm/model_executor/models/qwen3_5.py
-    - vllm/model_executor/models/qwen3_5_mtp.py
-    - tests/v1/e2e/spec_decode/
-  commands:
-    - pytest -v -s v1/e2e/spec_decode -k "qwen3_5-hybrid"

.buildkite/test_areas/weight_loading.yaml

@@ -3,7 +3,6 @@ depends_on:
   - image-build
 steps:
 - label: Weight Loading Multiple GPU  # 33min
-  key: weight-loading-multiple-gpu
   timeout_in_minutes: 45
   working_dir: "/vllm-workspace/tests"
   num_devices: 2

.github/CODEOWNERS

@@ -3,7 +3,7 @@
 
 # This lists cover the "core" components of vLLM that require careful review
 /vllm/compilation @zou3519 @youkaichao @ProExpertProg @BoyuanFeng @vadiklyutiy
-/vllm/distributed/kv_transfer @NickLucche @ApostaC @orozery @xuechendi
+/vllm/distributed/kv_transfer @NickLucche @ApostaC @orozery
 /vllm/lora @jeejeelee
 /vllm/model_executor/layers/attention @LucasWilkinson @MatthewBonanni
 /vllm/model_executor/layers/fused_moe @mgoin @pavanimajety
@@ -13,9 +13,6 @@
 /vllm/model_executor/layers/rotary_embedding.py @vadiklyutiy
 /vllm/model_executor/model_loader @22quinn
 /vllm/model_executor/layers/batch_invariant.py @yewentao256 
-/vllm/ir @ProExpertProg
-/vllm/kernels/ @ProExpertProg @tjtanaa
-/vllm/kernels/helion @ProExpertProg @zou3519
 /vllm/multimodal @DarkLight1337 @ywang96 @NickLucche @tjtanaa
 /vllm/vllm_flash_attn @LucasWilkinson @MatthewBonanni
 CMakeLists.txt @tlrmchlsmth @LucasWilkinson
@@ -44,9 +41,8 @@ CMakeLists.txt @tlrmchlsmth @LucasWilkinson
 /vllm/pooling_params.py @noooop @DarkLight1337
 /vllm/tokenizers @DarkLight1337 @njhill
 /vllm/renderers @DarkLight1337 @njhill
-/vllm/reasoning @aarnphm @chaunceyjiang @sfeng33 @bbrowning
-/vllm/tool_parsers @aarnphm @chaunceyjiang @sfeng33 @bbrowning
-/vllm/parser @aarnphm @chaunceyjiang @sfeng33 @bbrowning
+/vllm/reasoning @aarnphm @chaunceyjiang
+/vllm/tool_parsers @aarnphm @chaunceyjiang
 
 # vLLM V1
 /vllm/v1/attention @LucasWilkinson @MatthewBonanni
@@ -78,7 +74,6 @@ CMakeLists.txt @tlrmchlsmth @LucasWilkinson
 /tests/entrypoints @DarkLight1337 @robertgshaw2-redhat @aarnphm @NickLucche
 /tests/evals @mgoin @vadiklyutiy
 /tests/kernels @mgoin @tlrmchlsmth @WoosukKwon @yewentao256
-/tests/kernels/ir @ProExpertProg @tjtanaa
 /tests/models @DarkLight1337 @ywang96
 /tests/multimodal @DarkLight1337 @ywang96 @NickLucche
 /tests/quantization @mgoin @robertgshaw2-redhat @yewentao256 @pavanimajety
@@ -92,10 +87,7 @@ CMakeLists.txt @tlrmchlsmth @LucasWilkinson
 /tests/v1/kv_connector/nixl_integration @NickLucche
 /tests/v1/kv_connector @ApostaC @orozery
 /tests/v1/kv_offload @ApostaC @orozery
-/tests/v1/determinism @yewentao256
-/tests/reasoning @aarnphm @chaunceyjiang @sfeng33 @bbrowning
-/tests/tool_parsers @aarnphm @chaunceyjiang @sfeng33 @bbrowning
-/tests/tool_use @aarnphm @chaunceyjiang @sfeng33 @bbrowning
+/tests/v1/determinism @yewentao256 
 
 # Transformers modeling backend
 /vllm/model_executor/models/transformers @hmellor
@@ -124,16 +116,16 @@ mkdocs.yaml @hmellor
 /tools/pre_commit @hmellor
 
 # CPU
-/vllm/v1/worker/cpu* @bigPYJ1151 @xuechendi
+/vllm/v1/worker/cpu* @bigPYJ1151
 /csrc/cpu @bigPYJ1151
-/vllm/platforms/cpu.py @bigPYJ1151 @xuechendi
+/vllm/platforms/cpu.py @bigPYJ1151
 /cmake/cpu_extension.cmake @bigPYJ1151
-/docker/Dockerfile.cpu @bigPYJ1151 @xuechendi
+/docker/Dockerfile.cpu @bigPYJ1151
 
 # Intel GPU
-/vllm/v1/worker/xpu* @jikunshang @xuechendi
-/vllm/platforms/xpu.py @jikunshang @xuechendi
-/docker/Dockerfile.xpu @jikunshang @xuechendi
+/vllm/v1/worker/xpu* @jikunshang
+/vllm/platforms/xpu.py @jikunshang
+/docker/Dockerfile.xpu @jikunshang
 
 # Nemotron-specific files
 /vllm/model_executor/models/*nemotron* @tomeras91

.github/PULL_REQUEST_TEMPLATE.md

@@ -15,6 +15,7 @@ PLEASE FILL IN THE PR DESCRIPTION HERE ENSURING ALL CHECKLIST ITEMS (AT THE BOTT
 - [ ] The test plan, such as providing test command.
 - [ ] The test results, such as pasting the results comparison before and after, or e2e results
 - [ ] (Optional) The necessary documentation update, such as updating `supported_models.md` and `examples` for a new model.
+- [ ] (Optional) Release notes update. If your change is user facing, please update the release notes draft in the [Google Doc](https://docs.google.com/document/d/1YyVqrgX4gHTtrstbq8oWUImOyPCKSGnJ7xtTpmXzlRs/edit?tab=t.0).
 </details>
 
 **BEFORE SUBMITTING, PLEASE READ <https://docs.vllm.ai/en/latest/contributing>** (anything written below this line will be removed by GitHub Actions)

.github/mergify.yml

@@ -18,7 +18,7 @@ pull_request_rules:
 - name: comment-pre-commit-failure
   description: Comment on PR when pre-commit check fails
   conditions:
-    - check-failure=pre-commit
+    - status-failure=pre-commit
     - -closed
     - -draft
   actions:
@@ -51,7 +51,7 @@ pull_request_rules:
 - name: comment-dco-failure
   description: Comment on PR when DCO check fails
   conditions:
-    - check-failure=dco
+    - status-failure=dco
     - -closed
     - -draft
   actions:
@@ -83,8 +83,8 @@ pull_request_rules:
     - or:
       - files~=^examples/.*deepseek.*\.py
       - files~=^tests/.*deepseek.*\.py
+      - files~=^vllm/entrypoints/openai/tool_parsers/.*deepseek.*\.py
       - files~=^vllm/model_executor/models/.*deepseek.*\.py
-      - files~=^vllm/tool_parsers/.*deepseek.*\.py
       - files~=^vllm/reasoning/.*deepseek.*\.py
       - files~=^vllm/transformers_utils/.*deepseek.*\.py
       - title~=(?i)DeepSeek
@@ -110,10 +110,9 @@ pull_request_rules:
     - or:
       - files~=^examples/.*llama.*\.py
       - files~=^tests/.*llama.*\.py
+      - files~=^vllm/entrypoints/openai/tool_parsers/llama.*\.py
       - files~=^vllm/model_executor/models/.*llama.*\.py
-      - files~=^vllm/reasoning/.*llama.*\.py
-      - files~=^vllm/tool_parsers/.*llama.*\.py
-      - files~=^vllm/transformers_utils/.*llama.*\.py
+      - files~=^vllm/transformers_utils/configs/.*llama.*\.py
       - title~=(?i)llama
   actions:
     label:
@@ -134,23 +133,6 @@ pull_request_rules:
       add:
         - multi-modality
 
-- name: label-mistral
-  description: Automatically apply mistral label
-  conditions:
-    - label != stale
-    - or:
-      - files~=^examples/.*mistral.*\.py
-      - files~=^tests/.*mistral.*\.py
-      - files~=^vllm/model_executor/models/.*mistral.*\.py
-      - files~=^vllm/reasoning/.*mistral.*\.py
-      - files~=^vllm/tool_parsers/.*mistral.*\.py
-      - files~=^vllm/transformers_utils/.*mistral.*\.py
-      - title~=(?i)Mistral
-  actions:
-    label:
-      add:
-        - mistral
-
 - name: label-new-model
   description: Automatically apply new-model label
   conditions:
@@ -185,9 +167,7 @@ pull_request_rules:
       - files~=^examples/.*qwen.*\.py
       - files~=^tests/.*qwen.*\.py
       - files~=^vllm/model_executor/models/.*qwen.*\.py
-      - files~=^vllm/tool_parsers/.*qwen.*\.py
       - files~=^vllm/reasoning/.*qwen.*\.py
-      - files~=^vllm/transformers_utils/.*qwen.*\.py
       - title~=(?i)Qwen
   actions:
     label:
@@ -262,9 +242,8 @@ pull_request_rules:
       - files~=^docker/Dockerfile.xpu
       - files~=^\\.buildkite/intel_jobs/
       - files=\.buildkite/ci_config_intel.yaml
-      - files=vllm/model_executor/layers/fused_moe/experts/xpu_moe.py
+      - files=vllm/model_executor/layers/fused_moe/xpu_fused_moe.py
       - files=vllm/model_executor/kernels/linear/mixed_precision/xpu.py
-      - files=vllm/model_executor/kernels/linear/mxfp8/xpu.py
       - files=vllm/model_executor/kernels/linear/scaled_mm/xpu.py
       - files=vllm/distributed/device_communicators/xpu_communicator.py
       - files=vllm/v1/attention/backends/mla/xpu_mla_sparse.py
@@ -272,7 +251,6 @@ pull_request_rules:
       - files=vllm/v1/worker/xpu_worker.py
       - files=vllm/v1/worker/xpu_model_runner.py
       - files=vllm/_xpu_ops.py
-      - files=vllm/kernels/xpu_ops.py
       - files~=^vllm/lora/ops/xpu_ops
       - files=vllm/lora/punica_wrapper/punica_xpu.py
       - files=vllm/platforms/xpu.py
@@ -280,6 +258,7 @@ pull_request_rules:
       - title~=(?i)XPU
       - title~=(?i)Intel
       - title~=(?i)BMG
+      - title~=(?i)Arc
   actions:
     label:
       add:
@@ -308,7 +287,8 @@ pull_request_rules:
       - files=benchmarks/benchmark_serving_structured_output.py
       - files=benchmarks/run_structured_output_benchmark.sh
       - files=docs/features/structured_outputs.md
-      - files=^examples/features/structured_outputs/
+      - files=examples/offline_inference/structured_outputs.py
+      - files=examples/online_serving/structured_outputs/structured_outputs.py
       - files~=^tests/v1/structured_output/
       - files=tests/entrypoints/llm/test_struct_output_generate.py
       - files~=^vllm/v1/structured_output/
@@ -324,7 +304,7 @@ pull_request_rules:
     - or:
       - files~=^vllm/v1/spec_decode/
       - files~=^tests/v1/spec_decode/
-      - files=^examples/features/speculative_decoding/
+      - files~=^examples/.*(spec_decode|mlpspeculator|eagle|speculation).*\.py
       - files~=^vllm/model_executor/models/.*eagle.*\.py
       - files=vllm/model_executor/models/mlp_speculator.py
       - files~=^vllm/transformers_utils/configs/(eagle|medusa|mlp_speculator)\.py
@@ -388,24 +368,27 @@ pull_request_rules:
       - files~=^tests/entrypoints/anthropic/.*tool.*
       - files~=^vllm/tool_parsers/
       - files=docs/features/tool_calling.md
-      - files~=^examples/tool_calling/
+      - files~=^examples/tool_chat_*
+      - files=examples/offline_inference/chat_with_tools.py
+      - files=examples/online_serving/openai_chat_completion_client_with_tools_required.py
+      - files=examples/online_serving/openai_chat_completion_tool_calls_with_reasoning.py
+      - files=examples/online_serving/openai_chat_completion_client_with_tools.py
   actions:
     label:
       add:
         - tool-calling
 
-- name: auto-rebase to keep merge candidate within 1 day behind main
+- name: auto-rebase if approved, ready, and 40 commits behind main
   conditions:
     - base = main
     - label=ready
     - "#approved-reviews-by >= 1"
-    - "#commits-behind >= 50"
-    - "#check-failure = 0"
+    - "#commits-behind >= 40"
     - -closed
     - -draft
     - -conflict
   actions:
-    update: {}
+    rebase: {}
 
 - name: ping author on conflicts and add 'needs-rebase' label
   conditions:

.github/workflows/issue_autolabel.yml

@@ -320,25 +320,20 @@ jobs:
           script: |
             // Configuration: Map labels to GitHub users to CC
             // You can add multiple users per label, and multiple label configurations
-            // {users} will be replaced with @mentions
             const ccConfig = {
               rocm: {
-                users: ['hongxiayang', 'tjtanaa', 'vllmellm'],
-                message: 'CC {users} for ROCm-related issue',
-              },
-              mistral: {
-                users: ['patrickvonplaten', 'juliendenize', 'andylolu2'],
-                message: 'CC {users} for Mistral-related issue',
+                users: ['hongxiayang', 'tjtanaa', 'vllmellm'],  // Add more users as needed: ['user1', 'user2', 'user3']
+                message: 'CC {users} for ROCm-related issue'  // {users} will be replaced with @mentions
               },
               // Add more label -> user mappings here
               // Example:
               // cuda: {
               //   users: ['user1', 'user2'],
-              //   message: 'CC {users} for CUDA-related issue',
+              //   message: 'CC {users} for CUDA-related issue'
               // },
               // performance: {
               //   users: ['perfexpert'],
-              //   message: 'CC {users} for performance issue',
+              //   message: 'CC {users} for performance issue'
               // },
             };
             

.github/workflows/macos-smoke-test.yml

@@ -32,7 +32,7 @@ jobs:
 
       - name: Install dependencies and build vLLM
         run: |
-          uv pip install -r requirements/build/cpu.txt --index-strategy unsafe-best-match
+          uv pip install -r requirements/cpu-build.txt --index-strategy unsafe-best-match
           uv pip install -r requirements/cpu.txt --index-strategy unsafe-best-match
           uv pip install -e . --no-build-isolation
         env:
@@ -45,7 +45,6 @@ jobs:
       - name: Smoke test vllm serve
         run: |
           # Start server in background
-          VLLM_CPU_KVCACHE_SPACE=1 \
           vllm serve Qwen/Qwen3-0.6B \
             --max-model-len=2K \
             --load-format=dummy \

.github/workflows/new_pr_bot.yml

@@ -62,14 +62,14 @@ jobs:
             const prAuthor = context.payload.pull_request.user.login;
 
             const { data: searchResults } = await github.rest.search.issuesAndPullRequests({
-              q: `repo:${owner}/${repo} type:pr is:merged author:${prAuthor}`,
+              q: `repo:${owner}/${repo} type:pr author:${prAuthor}`,
               per_page: 1,
             });
 
-            const mergedPRCount = searchResults.total_count;
-            console.log(`Found ${mergedPRCount} merged PRs by ${prAuthor}`);
+            const authorPRCount = searchResults.total_count;
+            console.log(`Found ${authorPRCount} PRs by ${prAuthor}`);
 
-            if (mergedPRCount === 0) {
+            if (authorPRCount === 1) {
               console.log(`Posting welcome comment for first-time contributor: ${prAuthor}`);
               await github.rest.issues.createComment({
                 owner,
@@ -98,5 +98,5 @@ jobs:
                 ].join('\n'),
               });
             } else {
-              console.log(`Skipping comment for ${prAuthor} - not a first-time contributor (${mergedPRCount} merged PRs)`);
+              console.log(`Skipping comment for ${prAuthor} - not their first PR (${authorPRCount} PRs found)`);
             }

.github/workflows/pre-commit.yml

@@ -2,7 +2,6 @@ name: pre-commit
 
 on:
   pull_request:
-    types: [opened, synchronize, reopened, labeled]
   push:
     branches: [main]
 
@@ -29,7 +28,6 @@ jobs:
           });
 
           const hasReadyLabel = pr.labels.some(l => l.name === 'ready');
-          const hasVerifiedLabel = pr.labels.some(l => l.name === 'verified');
 
           const { data: mergedPRs } = await github.rest.search.issuesAndPullRequests({
             q: `repo:${context.repo.owner}/${context.repo.repo} is:pr is:merged author:${pr.user.login}`,
@@ -37,10 +35,10 @@ jobs:
           });
           const mergedCount = mergedPRs.total_count;
 
-          if (hasReadyLabel || hasVerifiedLabel || mergedCount >= 4) {
-            core.info(`Check passed: verified label=${hasVerifiedLabel}, ready label=${hasReadyLabel}, 4+ merged PRs=${mergedCount >= 4}`);
+          if (hasReadyLabel || mergedCount >= 4) {
+            core.info(`Check passed: ready label=${hasReadyLabel}, 4+ merged PRs=${mergedCount >= 4}`);
           } else {
-            core.setFailed(`PR must have the 'verified' or 'ready' (which also triggers tests) label or the author must have at least 4 merged PRs (found ${mergedCount}).`);
+            core.setFailed(`PR must have the 'ready' label or the author must have at least 4 merged PRs (found ${mergedCount}).`);
           }
 
   pre-commit:

.github/workflows/scripts/build.sh

@@ -9,12 +9,12 @@ PATH=${cuda_home}/bin:$PATH
 LD_LIBRARY_PATH=${cuda_home}/lib64:$LD_LIBRARY_PATH
 
 # Install requirements
-$python_executable -m pip install -r requirements/build/cuda.txt -r requirements/cuda.txt
+$python_executable -m pip install -r requirements/build.txt -r requirements/cuda.txt
 
 # Limit the number of parallel jobs to avoid OOM
 export MAX_JOBS=1
 # Make sure release wheels are built for the following architectures
-export TORCH_CUDA_ARCH_LIST="7.5 8.0 8.6 8.9 9.0 10.0 12.0+PTX"
+export TORCH_CUDA_ARCH_LIST="7.0 7.5 8.0 8.6 8.9 9.0+PTX"
 
 bash tools/check_repo.sh
 

.gitignore

@@ -12,9 +12,6 @@ vllm/third_party/triton_kernels/*
 # FlashMLA interface copied from source
 vllm/third_party/flashmla/flash_mla_interface.py
 
-# DeepGEMM vendored package built from source
-vllm/third_party/deep_gemm/
-
 # triton jit
 .triton
 
@@ -29,7 +26,6 @@ __pycache__/
 # Distribution / packaging
 .Python
 build/
-!requirements/build/
 cmake-build-*/
 CMakeUserPresets.json
 develop-eggs/
@@ -237,7 +233,6 @@ ep_kernels_workspace/
 
 # Allow tracked library source folders under submodules (e.g., benchmarks/lib)
 !vllm/benchmarks/lib/
-!.buildkite/scripts/lib/
 
 # Generated gRPC protobuf files (compiled at build time from vllm_engine.proto)
 vllm/grpc/vllm_engine_pb2.py

.pre-commit-config.yaml

@@ -39,24 +39,15 @@ repos:
   rev: 0.11.1
   hooks:
     - id: pip-compile
-      args: [
-        requirements/test/cuda.in,
-        -c, requirements/cuda.txt,
-        -o, requirements/test/cuda.txt,
-        --index-strategy, unsafe-best-match,
-        --torch-backend, cu130,
-        --python-platform, x86_64-manylinux_2_28,
-        --python-version, "3.12",
-      ]
-      files: ^requirements/(common|cuda|test/cuda)\.(in|txt)$
+      args: [requirements/test.in, -c, requirements/common.txt, -o, requirements/test.txt, --index-strategy, unsafe-best-match, --torch-backend, cu129, --python-platform, x86_64-manylinux_2_28, --python-version, "3.12"]
+      files: ^requirements/test\.(in|txt)$
     - id: pip-compile
       alias: pip-compile-rocm
       name: pip-compile-rocm
       args: [
-        requirements/test/rocm.in,
-        -c, requirements/rocm.txt,
-        -o, requirements/test/rocm.txt,
+        requirements/rocm-test.in, -o, requirements/rocm-test.txt,
         --index-strategy, unsafe-best-match,
+        -c, requirements/rocm.txt,
         --python-platform, x86_64-manylinux_2_28,
         --python-version, "3.12",
         # Exclude torch and CUDA/NVIDIA packages
@@ -68,76 +59,30 @@ repos:
         --no-emit-package, cuda-pathfinder,
         --no-emit-package, cuda-toolkit,
         --no-emit-package, cupy-cuda12x,
-        # nvidia packages (unsuffixed / unified naming)
         --no-emit-package, nvidia-cublas,
         --no-emit-package, nvidia-cuda-cupti,
         --no-emit-package, nvidia-cuda-nvrtc,
         --no-emit-package, nvidia-cuda-runtime,
-        --no-emit-package, nvidia-cudnn,
+        --no-emit-package, nvidia-cudnn-cu13,
         --no-emit-package, nvidia-cufft,
         --no-emit-package, nvidia-cufile,
         --no-emit-package, nvidia-curand,
         --no-emit-package, nvidia-cusolver,
         --no-emit-package, nvidia-cusparse,
-        --no-emit-package, nvidia-cusparselt,
-        --no-emit-package, nvidia-nccl,
-        --no-emit-package, nvidia-nvjitlink,
-        --no-emit-package, nvidia-nvshmem,
-        --no-emit-package, nvidia-nvtx,
-        # nvidia cu12 packages
-        --no-emit-package, nvidia-cublas-cu12,
-        --no-emit-package, nvidia-cuda-cupti-cu12,
-        --no-emit-package, nvidia-cuda-nvrtc-cu12,
-        --no-emit-package, nvidia-cuda-runtime-cu12,
-        --no-emit-package, nvidia-cudnn-cu12,
-        --no-emit-package, nvidia-cufft-cu12,
-        --no-emit-package, nvidia-cufile-cu12,
-        --no-emit-package, nvidia-curand-cu12,
-        --no-emit-package, nvidia-cusolver-cu12,
-        --no-emit-package, nvidia-cusparse-cu12,
-        --no-emit-package, nvidia-cusparselt-cu12,
-        --no-emit-package, nvidia-nccl-cu12,
-        --no-emit-package, nvidia-nvjitlink-cu12,
-        --no-emit-package, nvidia-nvshmem-cu12,
-        --no-emit-package, nvidia-nvtx-cu12,
-        # nvidia cu13 packages
-        --no-emit-package, nvidia-cublas-cu13,
-        --no-emit-package, nvidia-cuda-cupti-cu13,
-        --no-emit-package, nvidia-cuda-nvrtc-cu13,
-        --no-emit-package, nvidia-cuda-runtime-cu13,
-        --no-emit-package, nvidia-cudnn-cu13,
-        --no-emit-package, nvidia-cufft-cu13,
-        --no-emit-package, nvidia-cufile-cu13,
-        --no-emit-package, nvidia-curand-cu13,
-        --no-emit-package, nvidia-cusolver-cu13,
-        --no-emit-package, nvidia-cusparse-cu13,
         --no-emit-package, nvidia-cusparselt-cu13,
         --no-emit-package, nvidia-nccl-cu13,
-        --no-emit-package, nvidia-nvjitlink-cu13,
+        --no-emit-package, nvidia-nvjitlink,
         --no-emit-package, nvidia-nvshmem-cu13,
-        --no-emit-package, nvidia-nvtx-cu13,
+        --no-emit-package, nvidia-nvtx,
       ]
-      files: ^requirements/(common|rocm|test/rocm)\.(in|txt)$
-    - id: pip-compile
-      alias: pip-compile-xpu
-      name: pip-compile-xpu
-      args: [
-        requirements/test/xpu.in,
-        -c, requirements/xpu.txt,
-        -o, requirements/test/xpu.txt,
-        --index-strategy, unsafe-best-match,
-        --torch-backend, xpu,
-        --python-platform, x86_64-manylinux_2_39,
-        --python-version, "3.12",
-      ]
-      files: ^requirements/(common|xpu|test/xpu)\.(in|txt)$
+      files: ^requirements/rocm-test\.(in|txt)$
 - repo: local
   hooks:
   - id: format-torch-nightly-test
-    name: reformat test/nightly-torch.txt to be in sync with test/cuda.in
+    name: reformat nightly_torch_test.txt to be in sync with test.in
     language: python
     entry: python tools/pre_commit/generate_nightly_torch_test.py
-    files: ^requirements/test/cuda\.(in|txt)$
+    files: ^requirements/test\.(in|txt)$
   - id: mypy-local
     name: Run mypy locally for lowest supported Python version
     entry: python tools/pre_commit/mypy.py 0 "3.10"

AGENTS.md

@@ -72,11 +72,11 @@ uv pip install -e . --torch-backend=auto
 
 ```bash
 # Install test dependencies.
-# requirements/test/cuda.txt is pinned to x86_64; on other platforms, use the
+# requirements/test.txt is pinned to x86_64; on other platforms, use the
 # unpinned source file instead:
-uv pip install -r requirements/test/cuda.in    # resolves for current platform
+uv pip install -r requirements/test.in    # resolves for current platform
 # Or on x86_64:
-uv pip install -r requirements/test/cuda.txt
+uv pip install -r requirements/test.txt
 
 # Run a specific test file (use .venv/bin/python directly;
 # `source activate` does not persist in non-interactive shells):

CMakeLists.txt

@@ -34,10 +34,10 @@ install(CODE "set(CMAKE_INSTALL_LOCAL_ONLY TRUE)" ALL_COMPONENTS)
 # Supported python versions.  These versions will be searched in order, the
 # first match will be selected.  These should be kept in sync with setup.py.
 #
-set(PYTHON_SUPPORTED_VERSIONS "3.10" "3.11" "3.12" "3.13" "3.14")
+set(PYTHON_SUPPORTED_VERSIONS "3.10" "3.11" "3.12" "3.13")
 
 # Supported AMD GPU architectures.
-set(HIP_SUPPORTED_ARCHS "gfx906;gfx908;gfx90a;gfx942;gfx950;gfx1030;gfx1100;gfx1101;gfx1102;gfx1103;gfx1150;gfx1151;gfx1152;gfx1153;gfx1200;gfx1201")
+set(HIP_SUPPORTED_ARCHS "gfx906;gfx908;gfx90a;gfx942;gfx950;gfx1030;gfx1100;gfx1101;gfx1150;gfx1151;gfx1152;gfx1153;gfx1200;gfx1201")
 
 # ROCm installation prefix. Default to /opt/rocm but allow override via
 # -DROCM_PATH=/your/rocm/path when invoking cmake.
@@ -56,8 +56,8 @@ endif()
 # requirements.txt files and should be kept consistent.  The ROCm torch
 # versions are derived from docker/Dockerfile.rocm
 #
-set(TORCH_SUPPORTED_VERSION_CUDA "2.11.0")
-set(TORCH_SUPPORTED_VERSION_ROCM "2.11.0")
+set(TORCH_SUPPORTED_VERSION_CUDA "2.10.0")
+set(TORCH_SUPPORTED_VERSION_ROCM "2.10.0")
 
 #
 # Try to find python package with an executable that exactly matches
@@ -94,15 +94,12 @@ find_package(Torch REQUIRED)
 # This check must happen after find_package(Torch) because that's when CMAKE_CUDA_COMPILER_VERSION gets defined
 if(DEFINED CMAKE_CUDA_COMPILER_VERSION AND
    CMAKE_CUDA_COMPILER_VERSION VERSION_GREATER_EQUAL 13.0)
-   # starting from CUDA 12.9 and Blackwell (10.0), we use family-specific targets (10.0f, 12.0f, etc)
-   # to support the whole generation without specifying all sub-architectures
-   # see: https://developer.nvidia.com/blog/nvidia-blackwell-and-nvidia-cuda-12-9-introduce-family-specific-architecture-features/
-  set(CUDA_SUPPORTED_ARCHS "7.5;8.0;8.6;8.7;8.9;9.0;10.0;11.0;12.0")
+  set(CUDA_SUPPORTED_ARCHS "7.5;8.0;8.6;8.7;8.9;9.0;10.0;11.0;12.0;12.1")
 elseif(DEFINED CMAKE_CUDA_COMPILER_VERSION AND
    CMAKE_CUDA_COMPILER_VERSION VERSION_GREATER_EQUAL 12.8)
-  set(CUDA_SUPPORTED_ARCHS "7.5;8.0;8.6;8.7;8.9;9.0;10.0;10.1;10.3;12.0;12.1")
+  set(CUDA_SUPPORTED_ARCHS "7.0;7.2;7.5;8.0;8.6;8.7;8.9;9.0;10.0;10.1;12.0;12.1")
 else()
-  set(CUDA_SUPPORTED_ARCHS "7.0;7.5;8.0;8.6;8.7;8.9;9.0")
+  set(CUDA_SUPPORTED_ARCHS "7.0;7.2;7.5;8.0;8.6;8.7;8.9;9.0")
 endif()
 
 #
@@ -228,8 +225,8 @@ if(VLLM_GPU_LANG STREQUAL "HIP")
   # Certain HIP functions are marked as [[nodiscard]], yet vllm ignores the result which generates
   # a lot of warnings that always mask real issues. Suppressing until this is properly addressed.
   #
-  set(CMAKE_${VLLM_GPU_LANG}_FLAGS "${CMAKE_${VLLM_GPU_LANG}_FLAGS} -Wno-unused-result -Wno-unused-value")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-unused-result -Wno-unused-value")
+  set(CMAKE_${VLLM_GPU_LANG}_FLAGS "${CMAKE_${VLLM_GPU_LANG}_FLAGS} -Wno-unused-result")
+  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-unused-result")
 endif()
 
 #
@@ -302,7 +299,6 @@ set(VLLM_EXT_SRC
   "csrc/quantization/w8a8/int8/scaled_quant.cu"
   "csrc/quantization/w8a8/fp8/common.cu"
   "csrc/quantization/fused_kernels/fused_layernorm_dynamic_per_token_quant.cu"
-  "csrc/quantization/fused_kernels/fused_silu_mul_block_quant.cu"
   "csrc/quantization/gguf/gguf_kernel.cu"
   "csrc/quantization/activation_kernels.cu"
   "csrc/cuda_utils_kernels.cu"
@@ -310,10 +306,6 @@ set(VLLM_EXT_SRC
   "csrc/torch_bindings.cpp")
 
 if(VLLM_GPU_LANG STREQUAL "CUDA")
-  list(APPEND VLLM_EXT_SRC
-    "csrc/minimax_reduce_rms_kernel.cu"
-    "csrc/fused_deepseek_v4_qnorm_rope_kv_insert_kernel.cu")
-
   SET(CUTLASS_ENABLE_HEADERS_ONLY ON CACHE BOOL "Enable only the header library")
 
   # Set CUTLASS_REVISION. Used for FetchContent. Also fixes some bogus messages when building.
@@ -928,14 +920,6 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
       SRCS "${SRCS}"
       CUDA_ARCHS "${FP4_ARCHS}")
     list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
-    # nvfp4_kv_cache_kernels uses non-stable torch API and is called directly
-    # from cache_kernels.cu, so it belongs in _C rather than _C_stable.
-    set(NVFP4_KV_SRC "csrc/nvfp4_kv_cache_kernels.cu")
-    set_gencode_flags_for_srcs(
-      SRCS "${NVFP4_KV_SRC}"
-      CUDA_ARCHS "${FP4_ARCHS}")
-    target_sources(_C PRIVATE ${NVFP4_KV_SRC})
-    target_compile_definitions(_C PRIVATE ENABLE_NVFP4_SM120=1)
     list(APPEND VLLM_GPU_FLAGS "-DENABLE_NVFP4_SM120=1")
     list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM120=1")
     message(STATUS "Building NVFP4 for archs: ${FP4_ARCHS}")
@@ -957,19 +941,11 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
       "csrc/libtorch_stable/quantization/fp4/activation_nvfp4_quant_fusion_kernels.cu"
       "csrc/libtorch_stable/quantization/fp4/nvfp4_experts_quant.cu"
       "csrc/libtorch_stable/quantization/fp4/nvfp4_scaled_mm_kernels.cu"
-      "csrc/libtorch_stable/quantization/fp4/nvfp4_blockwise_moe_kernel.cu"
-      "csrc/libtorch_stable/quantization/fp4/mxfp4_experts_quant.cu"
-      "csrc/libtorch_stable/quantization/fp4/mxfp4_blockwise_moe_kernel.cu")
+      "csrc/libtorch_stable/quantization/fp4/nvfp4_blockwise_moe_kernel.cu")
     set_gencode_flags_for_srcs(
       SRCS "${SRCS}"
       CUDA_ARCHS "${FP4_ARCHS}")
     list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
-    set(NVFP4_KV_SRC "csrc/nvfp4_kv_cache_kernels.cu")
-    set_gencode_flags_for_srcs(
-      SRCS "${NVFP4_KV_SRC}"
-      CUDA_ARCHS "${FP4_ARCHS}")
-    target_sources(_C PRIVATE ${NVFP4_KV_SRC})
-    target_compile_definitions(_C PRIVATE ENABLE_NVFP4_SM100=1)
     list(APPEND VLLM_GPU_FLAGS "-DENABLE_NVFP4_SM100=1")
     list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM100=1")
     message(STATUS "Building NVFP4 for archs: ${FP4_ARCHS}")
@@ -1053,8 +1029,8 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   list(APPEND VLLM_MOE_EXT_SRC
     "csrc/moe/moe_wna16.cu"
     "csrc/moe/grouped_topk_kernels.cu"
-    "csrc/moe/router_gemm.cu"
-    "csrc/moe/topk_softplus_sqrt_kernels.cu")
+    "csrc/moe/gpt_oss_router_gemm.cu"
+    "csrc/moe/router_gemm.cu")
 endif()
 
 if(VLLM_GPU_LANG STREQUAL "CUDA")
@@ -1246,7 +1222,6 @@ endif()
 
 # For CUDA we also build and ship some external projects.
 if (VLLM_GPU_LANG STREQUAL "CUDA")
-    include(cmake/external_projects/deepgemm.cmake)
     include(cmake/external_projects/flashmla.cmake)
     include(cmake/external_projects/qutlass.cmake)
 

README.md

@@ -14,7 +14,7 @@ Easy, fast, and cheap LLM serving for everyone
 | <a href="https://docs.vllm.ai"><b>Documentation</b></a> | <a href="https://blog.vllm.ai/"><b>Blog</b></a> | <a href="https://arxiv.org/abs/2309.06180"><b>Paper</b></a> | <a href="https://x.com/vllm_project"><b>Twitter/X</b></a> | <a href="https://discuss.vllm.ai"><b>User Forum</b></a> | <a href="https://slack.vllm.ai"><b>Developer Slack</b></a> |
 </p>
 
-🔥 We have built a vLLM website to help you get started with vLLM. Please visit [vllm.ai](https://vllm.ai) to learn more.
+🔥 We have built a vllm website to help you get started with vllm. Please visit [vllm.ai](https://vllm.ai) to learn more.
 For events, please visit [vllm.ai/events](https://vllm.ai/events) to join us.
 
 ---
@@ -23,54 +23,47 @@ For events, please visit [vllm.ai/events](https://vllm.ai/events) to join us.
 
 vLLM is a fast and easy-to-use library for LLM inference and serving.
 
-Originally developed in the [Sky Computing Lab](https://sky.cs.berkeley.edu) at UC Berkeley, vLLM has grown into one of the most active open-source AI projects built and maintained by a diverse community of many dozens of academic institutions and companies from over 2000 contributors.
+Originally developed in the [Sky Computing Lab](https://sky.cs.berkeley.edu) at UC Berkeley, vLLM has evolved into a community-driven project with contributions from both academia and industry.
 
 vLLM is fast with:
 
 - State-of-the-art serving throughput
 - Efficient management of attention key and value memory with [**PagedAttention**](https://blog.vllm.ai/2023/06/20/vllm.html)
-- Continuous batching of incoming requests, chunked prefill, prefix caching
-- Fast and flexible model execution with piecewise and full CUDA/HIP graphs
-- Quantization: FP8, MXFP8/MXFP4, NVFP4, INT8, INT4, GPTQ/AWQ, GGUF, compressed-tensors, ModelOpt, TorchAO, and [more](https://docs.vllm.ai/en/latest/features/quantization/index.html)
-- Optimized attention kernels including FlashAttention, FlashInfer, TRTLLM-GEN, FlashMLA, and Triton
-- Optimized GEMM/MoE kernels for various precisions using CUTLASS, TRTLLM-GEN, CuTeDSL
-- Speculative decoding including n-gram, suffix, EAGLE, DFlash
-- Automatic kernel generation and graph-level transformations using torch.compile
-- Disaggregated prefill, decode, and encode
+- Continuous batching of incoming requests
+- Fast model execution with CUDA/HIP graph
+- Quantizations: [GPTQ](https://arxiv.org/abs/2210.17323), [AWQ](https://arxiv.org/abs/2306.00978), [AutoRound](https://arxiv.org/abs/2309.05516), INT4, INT8, and FP8
+- Optimized CUDA kernels, including integration with FlashAttention and FlashInfer
+- Speculative decoding
+- Chunked prefill
 
 vLLM is flexible and easy to use with:
 
 - Seamless integration with popular Hugging Face models
 - High-throughput serving with various decoding algorithms, including *parallel sampling*, *beam search*, and more
-- Tensor, pipeline, data, expert, and context parallelism for distributed inference
+- Tensor, pipeline, data and expert parallelism support for distributed inference
 - Streaming outputs
-- Generation of structured outputs using xgrammar or guidance
-- Tool calling and reasoning parsers
-- OpenAI-compatible API server, plus Anthropic Messages API and gRPC support
-- Efficient multi-LoRA support for dense and MoE layers
-- Support for NVIDIA GPUs, AMD GPUs, and x86/ARM/PowerPC CPUs. Additionally, diverse hardware plugins such as Google TPUs, Intel Gaudi, IBM Spyre, Huawei Ascend, Rebellions NPU, Apple Silicon, MetaX GPU, and more.
+- OpenAI-compatible API server
+- Support for NVIDIA GPUs, AMD CPUs and GPUs, Intel CPUs and GPUs, PowerPC CPUs, Arm CPUs, and TPU. Additionally, support for diverse hardware plugins such as Intel Gaudi, IBM Spyre and Huawei Ascend.
+- Prefix caching support
+- Multi-LoRA support
 
-vLLM seamlessly supports 200+ model architectures on Hugging Face, including:
+vLLM seamlessly supports most popular open-source models on HuggingFace, including:
 
-- Decoder-only LLMs (e.g., Llama, Qwen, Gemma)
-- Mixture-of-Expert LLMs (e.g., Mixtral, DeepSeek-V3, Qwen-MoE, GPT-OSS)
-- Hybrid attention and state-space models (e.g., Mamba, Qwen3.5)
-- Multi-modal models (e.g., LLaVA, Qwen-VL, Pixtral)
-- Embedding and retrieval models (e.g., E5-Mistral, GTE, ColBERT)
-- Reward and classification models (e.g., Qwen-Math)
+- Transformer-like LLMs (e.g., Llama)
+- Mixture-of-Expert LLMs (e.g., Mixtral, Deepseek-V2 and V3)
+- Embedding Models (e.g., E5-Mistral)
+- Multi-modal LLMs (e.g., LLaVA)
 
 Find the full list of supported models [here](https://docs.vllm.ai/en/latest/models/supported_models.html).
 
 ## Getting Started
 
-Install vLLM with [`uv`](https://docs.astral.sh/uv/) (recommended) or `pip`:
+Install vLLM with `pip` or [from source](https://docs.vllm.ai/en/latest/getting_started/installation/gpu/index.html#build-wheel-from-source):
 
 ```bash
-uv pip install vllm
+pip install vllm
 ```
 
-Or [build from source](https://docs.vllm.ai/en/latest/getting_started/installation/gpu/index.html#build-wheel-from-source) for development.
-
 Visit our [documentation](https://docs.vllm.ai/en/latest/) to learn more.
 
 - [Installation](https://docs.vllm.ai/en/latest/getting_started/installation.html)

benchmarks/attention_benchmarks/mla_runner.py

@@ -404,7 +404,6 @@ def _build_attention_metadata(
         query_start_loc=q_start_gpu,
         query_start_loc_cpu=q_start_cpu,
         seq_lens=seq_lens_gpu,
-        seq_lens_cpu_upper_bound=seq_lens_cpu,
         _seq_lens_cpu=seq_lens_cpu,
         _num_computed_tokens_cpu=num_computed_tokens_cpu,
         slot_mapping=slot_mapping,

benchmarks/fused_kernels/merge_attn_states_benchmarks.py

@@ -1,264 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
-"""
-Benchmark: Fused FP8 output quantization in merge_attn_states
-
-Compares fused vs unfused approaches for producing FP8-quantized merged
-attention output:
-  1. Fused CUDA     -- single CUDA kernel (merge + FP8 quant)
-  2. Fused Triton   -- single Triton kernel (merge + FP8 quant)
-  3. Unfused CUDA   -- CUDA merge + torch.compiled FP8 quant
-  4. Unfused Triton  -- Triton merge + torch.compiled FP8 quant
-
-Usage:
-    python benchmarks/fused_kernels/merge_attn_states_benchmarks.py
-    python benchmarks/fused_kernels/merge_attn_states_benchmarks.py --tp 1 4 8
-    python benchmarks/fused_kernels/merge_attn_states_benchmarks.py --dtype bfloat16
-"""
-
-import argparse
-import itertools
-
-import torch
-
-from vllm._custom_ops import merge_attn_states as merge_attn_states_cuda
-from vllm.benchmarks.lib.utils import default_vllm_config
-from vllm.model_executor.layers.quantization.input_quant_fp8 import QuantFP8
-from vllm.model_executor.layers.quantization.utils.quant_utils import GroupShape
-from vllm.platforms import current_platform
-from vllm.triton_utils import triton
-from vllm.v1.attention.ops.triton_merge_attn_states import (
-    merge_attn_states as merge_attn_states_triton,
-)
-
-# ---------------------------------------------------------------------------
-# Configuration defaults
-# ---------------------------------------------------------------------------
-
-NUM_TOKENS_LIST = [1, 16, 64, 256, 1024, 4096]
-
-# (label, num_heads, head_size) — num_heads is for TP=1
-HEAD_CONFIGS = [
-    ("DeepSeek-V3 MLA", 128, 128),
-    ("Llama-70B", 64, 128),
-    ("Llama-8B", 32, 128),
-]
-
-TP_SIZES = [1, 2, 4, 8]
-
-INPUT_DTYPES = [torch.float32, torch.float16, torch.bfloat16]
-
-QUANTILES = [0.5, 0.2, 0.8]
-
-
-# ---------------------------------------------------------------------------
-# Helpers
-# ---------------------------------------------------------------------------
-
-
-def short_dtype(dtype: torch.dtype) -> str:
-    return str(dtype).removeprefix("torch.")
-
-
-def make_inputs(
-    num_tokens: int,
-    num_heads: int,
-    head_size: int,
-    dtype: torch.dtype,
-):
-    """Create random prefix/suffix outputs and LSEs."""
-    prefix_output = torch.randn(
-        (num_tokens, num_heads, head_size), dtype=dtype, device="cuda"
-    )
-    suffix_output = torch.randn(
-        (num_tokens, num_heads, head_size), dtype=dtype, device="cuda"
-    )
-    prefix_lse = torch.randn(num_heads, num_tokens, dtype=torch.float32, device="cuda")
-    suffix_lse = torch.randn(num_heads, num_tokens, dtype=torch.float32, device="cuda")
-    # Sprinkle some inf values to exercise edge-case paths
-    mask = torch.rand(num_heads, num_tokens, device="cuda") < 0.05
-    prefix_lse[mask] = float("inf")
-    mask2 = torch.rand(num_heads, num_tokens, device="cuda") < 0.05
-    suffix_lse[mask2] = float("inf")
-    return prefix_output, suffix_output, prefix_lse, suffix_lse
-
-
-def build_configs(head_configs, num_tokens_list, input_dtypes, tp_sizes):
-    """Build (num_tokens, num_heads, head_size, dtype_str) config tuples,
-    applying TP division to num_heads and skipping invalid combos."""
-    configs = []
-    for (_, nh, hs), nt, dtype, tp in itertools.product(
-        head_configs, num_tokens_list, input_dtypes, tp_sizes
-    ):
-        nh_tp = nh // tp
-        if nh_tp >= 1:
-            configs.append((nt, nh_tp, hs, short_dtype(dtype)))
-    return configs
-
-
-def parse_args():
-    parser = argparse.ArgumentParser(
-        description="Benchmark merge_attn_states fused FP8 quantization"
-    )
-    parser.add_argument(
-        "--num-tokens",
-        type=int,
-        nargs="+",
-        default=None,
-        help=f"Override token counts (default: {NUM_TOKENS_LIST})",
-    )
-    parser.add_argument(
-        "--tp",
-        type=int,
-        nargs="+",
-        default=None,
-        help=f"TP sizes to simulate (divides num_heads) (default: {TP_SIZES})",
-    )
-    parser.add_argument(
-        "--dtype",
-        type=str,
-        nargs="+",
-        default=None,
-        help="Input dtypes (e.g. bfloat16 float16 float32). "
-        f"Default: {[short_dtype(d) for d in INPUT_DTYPES]}",
-    )
-    return parser.parse_args()
-
-
-# ---------------------------------------------------------------------------
-# Parse args and build configs before decorators
-# ---------------------------------------------------------------------------
-
-args = parse_args()
-
-num_tokens_list = args.num_tokens if args.num_tokens else NUM_TOKENS_LIST
-tp_sizes = args.tp if args.tp else TP_SIZES
-
-if args.dtype:
-    from vllm.utils.torch_utils import STR_DTYPE_TO_TORCH_DTYPE
-
-    input_dtypes = [STR_DTYPE_TO_TORCH_DTYPE[d] for d in args.dtype]
-else:
-    input_dtypes = INPUT_DTYPES
-
-configs = build_configs(HEAD_CONFIGS, num_tokens_list, input_dtypes, tp_sizes)
-
-torch._dynamo.config.recompile_limit = 8888
-
-
-# ---------------------------------------------------------------------------
-# Benchmark function
-# ---------------------------------------------------------------------------
-
-
-@triton.testing.perf_report(
-    triton.testing.Benchmark(
-        x_names=["num_tokens", "num_heads", "head_size", "dtype_str"],
-        x_vals=configs,
-        line_arg="provider",
-        line_vals=["fused_cuda", "fused_triton", "unfused_cuda", "unfused_triton"],
-        line_names=["Fused CUDA", "Fused Triton", "Unfused CUDA", "Unfused Triton"],
-        styles=[("blue", "-"), ("green", "-"), ("blue", "--"), ("green", "--")],
-        ylabel="us",
-        plot_name="merge_attn_states FP8 (fused vs unfused)",
-        args={},
-    )
-)
-@default_vllm_config()
-def benchmark(num_tokens, num_heads, head_size, dtype_str, provider):
-    input_dtype = getattr(torch, dtype_str)
-    fp8_dtype = current_platform.fp8_dtype()
-    prefix_out, suffix_out, prefix_lse, suffix_lse = make_inputs(
-        num_tokens, num_heads, head_size, input_dtype
-    )
-    output_scale = torch.tensor([0.1], dtype=torch.float32, device="cuda")
-
-    if provider == "fused_cuda":
-        output = torch.empty(
-            (num_tokens, num_heads, head_size), dtype=fp8_dtype, device="cuda"
-        )
-        fn = lambda: merge_attn_states_cuda(
-            output,
-            prefix_out,
-            prefix_lse,
-            suffix_out,
-            suffix_lse,
-            output_scale=output_scale,
-        )
-    elif provider == "fused_triton":
-        output = torch.empty(
-            (num_tokens, num_heads, head_size), dtype=fp8_dtype, device="cuda"
-        )
-        fn = lambda: merge_attn_states_triton(
-            output,
-            prefix_out,
-            prefix_lse,
-            suffix_out,
-            suffix_lse,
-            output_scale=output_scale,
-        )
-    elif provider == "unfused_cuda":
-        merge_buf = torch.empty(
-            (num_tokens, num_heads, head_size), dtype=input_dtype, device="cuda"
-        )
-        quant_fp8 = QuantFP8(
-            static=True,
-            group_shape=GroupShape.PER_TENSOR,
-            column_major_scales=False,
-        )
-        quant_input = merge_buf.view(-1, head_size)
-        compiled_quant = torch.compile(
-            quant_fp8.forward_native, fullgraph=True, dynamic=False
-        )
-
-        def unfused_fn():
-            merge_attn_states_cuda(
-                merge_buf, prefix_out, prefix_lse, suffix_out, suffix_lse
-            )
-            compiled_quant(quant_input, output_scale)
-
-        fn = unfused_fn
-    else:  # unfused_triton
-        merge_buf = torch.empty(
-            (num_tokens, num_heads, head_size), dtype=input_dtype, device="cuda"
-        )
-        quant_fp8 = QuantFP8(
-            static=True,
-            group_shape=GroupShape.PER_TENSOR,
-            column_major_scales=False,
-        )
-        quant_input = merge_buf.view(-1, head_size)
-        compiled_quant = torch.compile(
-            quant_fp8.forward_native, fullgraph=True, dynamic=False
-        )
-
-        def unfused_fn():
-            merge_attn_states_triton(
-                merge_buf, prefix_out, prefix_lse, suffix_out, suffix_lse
-            )
-            compiled_quant(quant_input, output_scale)
-
-        fn = unfused_fn
-
-    ms, min_ms, max_ms = triton.testing.do_bench_cudagraph(fn, quantiles=QUANTILES)
-    return 1000 * ms, 1000 * max_ms, 1000 * min_ms  # us
-
-
-# ---------------------------------------------------------------------------
-# Main
-# ---------------------------------------------------------------------------
-
-
-def main():
-    device_name = current_platform.get_device_name()
-    print(f"Device: {device_name}")
-    print(f"Token counts: {num_tokens_list}")
-    print(f"TP sizes: {tp_sizes}")
-    print(f"Input dtypes: {[short_dtype(d) for d in input_dtypes]}")
-    print(f"Head configs: {[(c[0], c[1], c[2]) for c in HEAD_CONFIGS]}")
-    benchmark.run(print_data=True)
-
-
-if __name__ == "__main__":
-    with torch.inference_mode():
-        main()

benchmarks/fused_kernels/silu_mul_block_quant_benchmark.py

@@ -1,211 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
-
-from collections.abc import Callable, Iterable
-from dataclasses import dataclass
-from itertools import product
-
-import torch
-import torch.nn.functional as F
-import torch.utils.benchmark as TBenchmark
-from torch.utils.benchmark import Measurement as TMeasurement
-from tqdm import tqdm
-
-import vllm._custom_ops as ops
-from vllm.model_executor.layers.quantization.utils.fp8_utils import (
-    per_token_group_quant_fp8,
-)
-
-
-@dataclass
-class bench_params_t:
-    num_tokens: int
-    hidden_size: int
-    dtype: torch.dtype
-    group_size: int  # Changed from list[int] to int
-
-    def description(self):
-        return (
-            f"N {self.num_tokens} "
-            f"x D {self.hidden_size} "
-            f"x DT {self.dtype} "
-            f"x GS {self.group_size}"
-        )
-
-
-def get_bench_params() -> list[bench_params_t]:
-    """Test configurations covering common model sizes."""
-    NUM_TOKENS = [16, 128, 512, 2048]
-    HIDDEN_SIZES = [1024, 2048, 4096, 5120, 14336]  # Common FFN sizes
-    DTYPES = [torch.float16, torch.bfloat16]
-    GROUP_SIZES = [64, 128]  # Changed from [[1, 64], [1, 128]]
-
-    combinations = product(NUM_TOKENS, HIDDEN_SIZES, DTYPES, GROUP_SIZES)
-    bench_params = list(
-        map(lambda x: bench_params_t(x[0], x[1], x[2], x[3]), combinations)
-    )
-    return bench_params
-
-
-# Reference implementations
-def unfused_fp8_impl(
-    x: torch.Tensor,
-    quant_dtype: torch.dtype,
-    group_size: int,  # Changed from list[int]
-):
-    """Unfused: SiLU+Mul then per-tensor quantize."""
-    hidden = x.shape[-1] // 2
-    gate, up = x.split(hidden, dim=-1)
-
-    # SiLU(gate) * up
-    silu_out = F.silu(gate) * up
-
-    # Per-tensor quantize (no group_size used here)
-    silu_out, _ = ops.scaled_fp8_quant(silu_out)
-
-
-def unfused_groupwise_fp8_impl(
-    x: torch.Tensor,
-    quant_dtype: torch.dtype,
-    group_size: int,  # Changed from list[int]
-):
-    """Unfused: SiLU+Mul then group-wise quantize."""
-    hidden = x.shape[-1] // 2
-    gate, up = x.split(hidden, dim=-1)
-
-    # SiLU(gate) * up
-    silu_out = F.silu(gate) * up
-
-    # Group quantize - use group_size directly
-    silu_out, _ = per_token_group_quant_fp8(
-        silu_out, group_size=group_size, use_ue8m0=False
-    )
-
-
-def fused_impl(
-    x: torch.Tensor,
-    quant_dtype: torch.dtype,
-    group_size: int,
-):
-    """Fused: SiLU+Mul+Block Quantization in single kernel."""
-    out, _ = ops.silu_and_mul_per_block_quant(
-        x,
-        group_size=group_size,
-        quant_dtype=quant_dtype,
-        is_scale_transposed=False,
-    )
-
-
-# Bench functions
-def bench_fn(
-    x: torch.Tensor,
-    quant_dtype: torch.dtype,
-    group_size: int,
-    label: str,
-    sub_label: str,
-    fn: Callable,
-    description: str,
-) -> TMeasurement:
-    min_run_time = 1
-
-    globals = {
-        "x": x,
-        "quant_dtype": quant_dtype,
-        "group_size": group_size,
-        "fn": fn,
-    }
-    return TBenchmark.Timer(
-        stmt="fn(x, quant_dtype, group_size)",
-        globals=globals,
-        label=label,
-        sub_label=sub_label,
-        description=description,
-    ).blocked_autorange(min_run_time=min_run_time)
-
-
-def bench(params: bench_params_t, label: str, sub_label: str) -> Iterable[TMeasurement]:
-    """Run benchmarks for all implementations."""
-    # Make inputs: [num_tokens, hidden_size * 2] for [gate || up]
-    scale = 1 / params.hidden_size
-    x = (
-        torch.randn(
-            params.num_tokens,
-            params.hidden_size * 2,
-            dtype=params.dtype,
-            device="cuda",
-        )
-        * scale
-    )
-
-    timers = []
-
-    # Unfused per-tensor FP8
-    timers.append(
-        bench_fn(
-            x,
-            torch.float8_e4m3fn,
-            params.group_size,
-            label,
-            sub_label,
-            unfused_fp8_impl,
-            "unfused_fp8_impl",
-        )
-    )
-
-    # Unfused group-wise FP8
-    timers.append(
-        bench_fn(
-            x,
-            torch.float8_e4m3fn,
-            params.group_size,
-            label,
-            sub_label,
-            unfused_groupwise_fp8_impl,
-            "unfused_groupwise_fp8_impl",
-        )
-    )
-
-    # Fused group-wise FP8
-    timers.append(
-        bench_fn(
-            x,
-            torch.float8_e4m3fn,
-            params.group_size,
-            label,
-            sub_label,
-            fused_impl,
-            "fused_groupwise_fp8_impl",
-        )
-    )
-
-    return timers
-
-
-def print_timers(timers: Iterable[TMeasurement]):
-    compare = TBenchmark.Compare(timers)
-    compare.print()
-
-
-def main():
-    torch.set_default_device("cuda")
-    bench_params = get_bench_params()
-
-    print(f"Running {len(bench_params)} benchmark configurations...")
-    print(
-        f"This will take approximately {len(bench_params) * 3} seconds (1s per variant)"
-    )
-    print()
-
-    timers = []
-    for bp in tqdm(bench_params):
-        result_timers = bench(bp, "silu-mul-block-quant", bp.description())
-        timers.extend(result_timers)
-
-    print("\n" + "=" * 80)
-    print("FINAL COMPARISON - ALL RESULTS")
-    print("=" * 80)
-    print_timers(timers)
-
-
-if __name__ == "__main__":
-    main()

benchmarks/kernels/benchmark_block_fp8_gemm.py

@@ -9,12 +9,11 @@ os.environ["VLLM_USE_DEEP_GEMM"] = "0"
 import torch
 
 from vllm.benchmarks.lib.utils import default_vllm_config
-from vllm.model_executor.kernels.linear import (
-    init_fp8_linear_kernel,
+from vllm.model_executor.layers.quantization.utils.fp8_utils import (
+    W8A8BlockFp8LinearOp,
 )
 from vllm.model_executor.layers.quantization.utils.quant_utils import (
     GroupShape,
-    create_fp8_quant_key,
 )
 from vllm.model_executor.layers.quantization.utils.w8a8_utils import (
     CUTLASS_BLOCK_FP8_SUPPORTED,
@@ -71,15 +70,11 @@ def build_w8a8_block_fp8_runner(M, N, K, block_size, device, use_cutlass):
     weight_group_shape = GroupShape(block_n, block_k)
     act_quant_group_shape = GroupShape(1, block_k)  # Per-token, per-group quantization
 
-    linear_op = init_fp8_linear_kernel(
-        weight_quant_key=create_fp8_quant_key(
-            static=True, group_shape=weight_group_shape
-        ),
-        activation_quant_key=create_fp8_quant_key(
-            static=False, group_shape=act_quant_group_shape
-        ),
-        out_dtype=torch.get_default_dtype(),
-        module_name="build_w8a8_block_fp8_runner",
+    linear_op = W8A8BlockFp8LinearOp(
+        weight_group_shape=weight_group_shape,
+        act_quant_group_shape=act_quant_group_shape,
+        cutlass_block_fp8_supported=use_cutlass,
+        use_aiter_and_is_supported=False,
     )
 
     def run():

benchmarks/kernels/benchmark_cutlass_moe_fp8.py

@@ -16,7 +16,7 @@ from vllm.model_executor.layers.fused_moe.all2all_utils import (
     maybe_make_prepare_finalize,
 )
 from vllm.model_executor.layers.fused_moe.config import fp8_w8a8_moe_quant_config
-from vllm.model_executor.layers.fused_moe.experts.cutlass_moe import CutlassExpertsFp8
+from vllm.model_executor.layers.fused_moe.cutlass_moe import CutlassExpertsFp8
 from vllm.model_executor.layers.fused_moe.fused_moe import fused_experts, fused_topk
 from vllm.platforms import current_platform
 from vllm.utils.argparse_utils import FlexibleArgumentParser

benchmarks/kernels/benchmark_cutlass_moe_nvfp4.py

@@ -22,7 +22,7 @@ from vllm.model_executor.layers.fused_moe.config import (
     fp8_w8a8_moe_quant_config,
     nvfp4_moe_quant_config,
 )
-from vllm.model_executor.layers.fused_moe.experts.cutlass_moe import (
+from vllm.model_executor.layers.fused_moe.cutlass_moe import (
     CutlassExpertsFp4,
 )
 from vllm.model_executor.layers.fused_moe.fused_moe import fused_experts, fused_topk

benchmarks/kernels/benchmark_grouped_gemm_cutlass.py

@@ -13,7 +13,7 @@ from vllm.model_executor.layers.fused_moe.all2all_utils import (
     maybe_make_prepare_finalize,
 )
 from vllm.model_executor.layers.fused_moe.config import fp8_w8a8_moe_quant_config
-from vllm.model_executor.layers.fused_moe.experts.cutlass_moe import CutlassExpertsFp8
+from vllm.model_executor.layers.fused_moe.cutlass_moe import CutlassExpertsFp8
 from vllm.model_executor.layers.fused_moe.fused_moe import (
     fused_experts,
     fused_topk,

benchmarks/kernels/benchmark_moe_align_block_size.py

@@ -9,7 +9,6 @@ from vllm.model_executor.layers.fused_moe.moe_align_block_size import (
     moe_align_block_size,
 )
 from vllm.triton_utils import triton
-from vllm.utils.torch_utils import set_random_seed
 
 
 def get_topk_ids(num_tokens: int, num_experts: int, topk: int) -> torch.Tensor:
@@ -45,7 +44,7 @@ configs = list(
 def benchmark(num_tokens, num_experts, topk, ep_size, provider):
     """Benchmark function for Triton."""
     block_size = 256
-    set_random_seed(0)
+    torch.cuda.manual_seed_all(0)
     topk_ids = get_topk_ids(num_tokens, num_experts, topk)
 
     e_map = None

benchmarks/kernels/benchmark_router_gemm.py

@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: Apache-2.0
+# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
+
+import torch
+import torch.nn.functional as F
+
+from vllm import _custom_ops as ops
+from vllm.platforms import current_platform
+from vllm.transformers_utils.config import get_config
+from vllm.triton_utils import triton
+from vllm.utils.argparse_utils import FlexibleArgumentParser
+
+# Dimensions supported by the DSV3 specialized kernel
+DSV3_SUPPORTED_NUM_EXPERTS = [256, 384]
+DSV3_SUPPORTED_HIDDEN_SIZES = [7168]
+
+# Dimensions supported by the gpt-oss specialized kernel
+GPT_OSS_SUPPORTED_NUM_EXPERTS = [32, 128]
+GPT_OSS_SUPPORTED_HIDDEN_SIZES = [2880]
+
+
+def get_batch_size_range(max_batch_size):
+    return [2**x for x in range(14) if 2**x <= max_batch_size]
+
+
+def get_model_params(config):
+    if config.architectures[0] in (
+        "DeepseekV2ForCausalLM",
+        "DeepseekV3ForCausalLM",
+        "DeepseekV32ForCausalLM",
+    ):
+        num_experts = config.n_routed_experts
+        hidden_size = config.hidden_size
+    elif config.architectures[0] in ("GptOssForCausalLM",):
+        num_experts = config.num_local_experts
+        hidden_size = config.hidden_size
+    else:
+        raise ValueError(f"Unsupported architecture: {config.architectures}")
+    return num_experts, hidden_size
+
+
+def get_benchmark(model, max_batch_size, trust_remote_code):
+    @triton.testing.perf_report(
+        triton.testing.Benchmark(
+            x_names=["batch_size"],
+            x_vals=get_batch_size_range(max_batch_size),
+            x_log=False,
+            line_arg="provider",
+            line_vals=[
+                "torch",
+                "vllm",
+            ],
+            line_names=["PyTorch", "vLLM"],
+            styles=([("blue", "-"), ("red", "-")]),
+            ylabel="TFLOPs",
+            plot_name=f"{model} router gemm throughput",
+            args={},
+        )
+    )
+    def benchmark(batch_size, provider):
+        config = get_config(model=model, trust_remote_code=trust_remote_code)
+        num_experts, hidden_size = get_model_params(config)
+
+        mat_a = torch.randn(
+            (batch_size, hidden_size), dtype=torch.bfloat16, device="cuda"
+        ).contiguous()
+        mat_b = torch.randn(
+            (num_experts, hidden_size), dtype=torch.bfloat16, device="cuda"
+        ).contiguous()
+        bias = torch.randn(
+            num_experts, dtype=torch.bfloat16, device="cuda"
+        ).contiguous()
+
+        is_hopper_or_blackwell = current_platform.is_device_capability(
+            90
+        ) or current_platform.is_device_capability_family(100)
+        allow_dsv3_router_gemm = (
+            is_hopper_or_blackwell
+            and num_experts in DSV3_SUPPORTED_NUM_EXPERTS
+            and hidden_size in DSV3_SUPPORTED_HIDDEN_SIZES
+        )
+        allow_gpt_oss_router_gemm = (
+            is_hopper_or_blackwell
+            and num_experts in GPT_OSS_SUPPORTED_NUM_EXPERTS
+            and hidden_size in GPT_OSS_SUPPORTED_HIDDEN_SIZES
+        )
+
+        has_bias = False
+        if allow_gpt_oss_router_gemm:
+            has_bias = True
+
+        quantiles = [0.5, 0.2, 0.8]
+
+        if provider == "torch":
+
+            def runner():
+                if has_bias:
+                    F.linear(mat_a, mat_b, bias)
+                else:
+                    F.linear(mat_a, mat_b)
+        elif provider == "vllm":
+
+            def runner():
+                if allow_dsv3_router_gemm:
+                    ops.dsv3_router_gemm(mat_a, mat_b, torch.bfloat16)
+                elif allow_gpt_oss_router_gemm:
+                    ops.gpt_oss_router_gemm(mat_a, mat_b, bias)
+                else:
+                    raise ValueError("Unsupported router gemm")
+
+        ms, min_ms, max_ms = triton.testing.do_bench_cudagraph(
+            runner, quantiles=quantiles
+        )
+
+        def tflops(t_ms):
+            flops = 2 * batch_size * hidden_size * num_experts
+            return flops / (t_ms * 1e-3) / 1e12
+
+        return tflops(ms), tflops(max_ms), tflops(min_ms)
+
+    return benchmark
+
+
+if __name__ == "__main__":
+    parser = FlexibleArgumentParser()
+    parser.add_argument("--model", type=str, default="openai/gpt-oss-20b")
+    parser.add_argument("--max-batch-size", default=16, type=int)
+    parser.add_argument("--trust-remote-code", action="store_true")
+    args = parser.parse_args()
+
+    # Get the benchmark function
+    benchmark = get_benchmark(args.model, args.max_batch_size, args.trust_remote_code)
+    # Run performance benchmark
+    benchmark.run(print_data=True)

benchmarks/kernels/benchmark_silu_mul_fp8_quant.py

@@ -20,7 +20,7 @@ import matplotlib.pyplot as plt
 import numpy as np
 import torch
 
-from vllm.model_executor.layers.fused_moe.experts.batched_deep_gemm_moe import (
+from vllm.model_executor.layers.fused_moe.batched_deep_gemm_moe import (
     persistent_masked_m_silu_mul_quant,
 )
 from vllm.triton_utils import tl, triton

benchmarks/kernels/benchmark_vit_bilinear_pos_embed.py

@@ -1,162 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
-
-# Benchmarks the fused Triton bilinear position-embedding kernel against
-# the pure-PyTorch (native) implementation used in Qwen3-VL ViT models.
-#
-# == Usage Examples ==
-#
-# Default benchmark:
-#   python3 benchmark_vit_bilinear_pos_embed.py
-#
-# Custom parameters:
-#   python3 benchmark_vit_bilinear_pos_embed.py --hidden-dim 1152 \
-#       --num-grid-per-side 48 --save-path ./configs/vit_pos_embed/
-
-import itertools
-
-import torch
-
-from vllm.model_executor.models.qwen3_vl import (
-    pos_embed_interpolate_native,
-    triton_pos_embed_interpolate,
-)
-from vllm.triton_utils import HAS_TRITON, triton
-from vllm.utils.argparse_utils import FlexibleArgumentParser
-
-# (h, w) configurations to benchmark
-h_w_configs = [
-    (16, 16),
-    (32, 32),
-    (48, 48),
-    (64, 64),
-    (128, 128),
-    (32, 48),
-    (60, 80),
-]
-
-# Temporal dimensions
-t_range = [1]
-
-configs = list(itertools.product(t_range, h_w_configs))
-
-
-def get_benchmark(
-    num_grid_per_side: int,
-    spatial_merge_size: int,
-    hidden_dim: int,
-    dtype: torch.dtype,
-    device: str,
-):
-    @triton.testing.perf_report(
-        triton.testing.Benchmark(
-            x_names=["t", "h_w"],
-            x_vals=[list(_) for _ in configs],
-            line_arg="provider",
-            line_vals=["native", "triton"],
-            line_names=["Native (PyTorch)", "Triton"],
-            styles=[("blue", "-"), ("red", "-")],
-            ylabel="us",
-            plot_name=(
-                f"vit-bilinear-pos-embed-"
-                f"grid{num_grid_per_side}-"
-                f"dim{hidden_dim}-"
-                f"{dtype}"
-            ),
-            args={},
-        )
-    )
-    def benchmark(t, h_w, provider):
-        h, w = h_w
-
-        torch.manual_seed(42)
-        embed_weight = (
-            torch.randn(
-                num_grid_per_side * num_grid_per_side,
-                hidden_dim,
-                device=device,
-                dtype=dtype,
-            )
-            * 0.25
-        )
-
-        quantiles = [0.5, 0.2, 0.8]
-
-        if provider == "native":
-            ms, min_ms, max_ms = triton.testing.do_bench(
-                lambda: pos_embed_interpolate_native(
-                    embed_weight,
-                    t,
-                    h,
-                    w,
-                    num_grid_per_side,
-                    spatial_merge_size,
-                    dtype,
-                ),
-                quantiles=quantiles,
-            )
-        else:
-            assert HAS_TRITON, "Triton not available"
-            ms, min_ms, max_ms = triton.testing.do_bench(
-                lambda: triton_pos_embed_interpolate(
-                    embed_weight,
-                    t,
-                    h,
-                    w,
-                    num_grid_per_side,
-                    spatial_merge_size,
-                    dtype,
-                ),
-                quantiles=quantiles,
-            )
-
-        return 1000 * ms, 1000 * max_ms, 1000 * min_ms
-
-    return benchmark
-
-
-if __name__ == "__main__":
-    parser = FlexibleArgumentParser(
-        description="Benchmark bilinear position embedding interpolation."
-    )
-    parser.add_argument(
-        "--num-grid-per-side",
-        type=int,
-        default=48,
-        help="Position embedding grid size (default: 48 for Qwen3-VL)",
-    )
-    parser.add_argument(
-        "--spatial-merge-size",
-        type=int,
-        default=2,
-        help="Spatial merge size (default: 2)",
-    )
-    parser.add_argument(
-        "--hidden-dim",
-        type=int,
-        default=1152,
-        help="Embedding hidden dimension (default: 1152 for Qwen3-VL)",
-    )
-    parser.add_argument(
-        "--device",
-        type=str,
-        choices=["cuda:0", "cuda:1"],
-        default="cuda:0",
-    )
-    parser.add_argument(
-        "--save-path",
-        type=str,
-        default="./vit_pos_embed/",
-    )
-    args = parser.parse_args()
-
-    dtype = torch.bfloat16
-
-    bench = get_benchmark(
-        args.num_grid_per_side,
-        args.spatial_merge_size,
-        args.hidden_dim,
-        dtype,
-        args.device,
-    )
-    bench.run(print_data=True, save_path=args.save_path)

benchmarks/kernels/benchmark_vit_fp8_attn.py

@@ -1,324 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
-
-# Benchmarks FP8 vs BF16 ViT attention via FlashInfer cuDNN backend.
-#
-# == Usage Examples ==
-#
-# Benchmark mode (default, FlashInfer CUDAGraph Bench)
-#   python3 benchmark_vit_fp8_attn.py
-#
-# Profile mode (PyTorch profiler, saves TensorBoard traces):
-#   python3 benchmark_vit_fp8_attn.py --profile
-#   python3 benchmark_vit_fp8_attn.py --profile --profile-output-dir ./profile_traces
-#
-# Custom seq_lens:
-#   python3 benchmark_vit_fp8_attn.py --seq-lens 4096 8192 16384
-
-from functools import partial
-
-import numpy as np
-import torch
-from torch.profiler import ProfilerActivity, profile, record_function
-
-from vllm.utils.argparse_utils import FlexibleArgumentParser
-
-# Qwen3-VL defaults
-NUM_HEADS = 16
-HEAD_DIM = 72
-DEFAULT_SEQ_LENS = [2304, 4096, 8192, 16384]
-
-
-def _setup_fp8_attention(num_heads: int, head_dim: int) -> tuple:
-    """Create FP8 and BF16 attention modules + workspace."""
-    from types import SimpleNamespace
-    from unittest.mock import patch
-
-    from vllm.config import VllmConfig, set_current_vllm_config
-    from vllm.config.multimodal import MultiModalConfig
-    from vllm.model_executor.layers.attention.mm_encoder_attention import (
-        MMEncoderAttention,
-        _get_flashinfer_workspace_buffer,
-    )
-    from vllm.v1.attention.backends.registry import AttentionBackendEnum
-
-    old_dtype = torch.get_default_dtype()
-    torch.set_default_dtype(torch.bfloat16)
-
-    backend_patch = patch(
-        "vllm.model_executor.layers.attention.mm_encoder_attention"
-        ".get_vit_attn_backend",
-        return_value=AttentionBackendEnum.FLASHINFER,
-    )
-
-    # FP8 attention
-    mm_config_fp8 = MultiModalConfig(mm_encoder_attn_dtype="fp8")
-    vllm_config_fp8 = VllmConfig()
-    vllm_config_fp8.model_config = SimpleNamespace(multimodal_config=mm_config_fp8)
-    with set_current_vllm_config(vllm_config_fp8), backend_patch:
-        attn_fp8 = MMEncoderAttention(
-            num_heads=num_heads,
-            head_size=head_dim,
-            prefix="visual.blocks.0.attn",
-        ).to("cuda")
-
-    # BF16 attention (no FP8)
-    with set_current_vllm_config(VllmConfig()), backend_patch:
-        attn_bf16 = MMEncoderAttention(
-            num_heads=num_heads,
-            head_size=head_dim,
-            prefix="visual.blocks.0.attn",
-        ).to("cuda")
-
-    torch.set_default_dtype(old_dtype)
-
-    workspace = _get_flashinfer_workspace_buffer()
-    return attn_fp8, attn_bf16, workspace
-
-
-def _build_meta(
-    seq_len: int,
-    num_heads: int,
-    head_dim: int,
-    fp8: bool,
-):
-    """Build cu_seqlens, max_seqlen, sequence_lengths."""
-    from vllm.model_executor.layers.attention.mm_encoder_attention import (
-        MMEncoderAttention,
-    )
-    from vllm.utils.math_utils import round_up
-    from vllm.v1.attention.backends.registry import AttentionBackendEnum
-
-    cu_np = np.array([0, seq_len], dtype=np.int32)
-    fp8_padded = num_heads * round_up(head_dim, 16) if fp8 else None
-
-    seq_lengths = MMEncoderAttention.maybe_compute_seq_lens(
-        AttentionBackendEnum.FLASHINFER, cu_np, torch.device("cuda")
-    )
-    max_seqlen = torch.tensor(
-        MMEncoderAttention.compute_max_seqlen(AttentionBackendEnum.FLASHINFER, cu_np),
-        dtype=torch.int32,
-    )
-    cu_seqlens = MMEncoderAttention.maybe_recompute_cu_seqlens(
-        AttentionBackendEnum.FLASHINFER,
-        cu_np,
-        num_heads * head_dim,
-        1,
-        torch.device("cuda"),
-        fp8_padded_hidden_size=fp8_padded,
-    )
-    return cu_seqlens, max_seqlen, seq_lengths
-
-
-def run_benchmark(
-    seq_lens: list[int],
-    num_heads: int,
-    head_dim: int,
-    method: str,
-):
-    """Benchmark FP8 vs BF16 attention across seq_lens.
-
-    Uses FlashInfer GPU-level timing to measure pure kernel time,
-    excluding CPU launch overhead.
-    """
-    if method == "cupti":
-        from flashinfer.testing import bench_gpu_time_with_cupti as bench_fn
-
-        bench_fn = partial(bench_fn, use_cuda_graph=True, cold_l2_cache=False)
-    elif method == "cudagraph":
-        from flashinfer.testing import (
-            bench_gpu_time_with_cudagraph as bench_fn,
-        )
-
-        bench_fn = partial(bench_fn, cold_l2_cache=False)
-    else:
-        raise ValueError(f"Invalid method: {method}")
-
-    attn_fp8, attn_bf16, workspace = _setup_fp8_attention(num_heads, head_dim)
-
-    print(f"Timing method: {method}")
-    print(f"{'seq_len':>8} {'BF16 (us)':>12} {'FP8 (us)':>12} {'Speedup':>10}")
-    print("-" * 46)
-
-    for seq_len in seq_lens:
-        torch.manual_seed(42)
-
-        q = torch.randn(
-            seq_len,
-            num_heads,
-            head_dim,
-            device="cuda",
-            dtype=torch.bfloat16,
-        )
-        k = torch.randn_like(q)
-        v = torch.randn_like(q)
-
-        cu_fp8, max_s, seq_l = _build_meta(seq_len, num_heads, head_dim, fp8=True)
-        # we can reuse cu_fp8 for cu_bf16 since q, k, and v are contiguous
-        cu_bf16 = cu_fp8.clone()
-
-        def bf16_fn(q=q, k=k, v=v, cu=cu_bf16, ms=max_s, sl=seq_l):
-            attn_bf16._forward_flashinfer(q, k, v, cu, ms, sl)
-
-        def fp8_fn(q=q, k=k, v=v, cu=cu_fp8, ms=max_s, sl=seq_l):
-            attn_fp8._forward_flashinfer(q, k, v, cu, ms, sl)
-
-        # bench_fn returns List[float] of per-iteration times in ms
-        bf16_times = bench_fn(bf16_fn)
-        fp8_times = bench_fn(fp8_fn)
-
-        bf16_us = np.median(bf16_times) * 1e3  # ms -> us
-        fp8_us = np.median(fp8_times) * 1e3
-        speedup = bf16_us / fp8_us if fp8_us > 0 else float("inf")
-
-        print(f"{seq_len:>8} {bf16_us:>12.1f} {fp8_us:>12.1f} {speedup:>9.2f}x")
-
-
-def _make_trace_handler(output_dir: str, worker_name: str, label: str):
-    """Create a trace handler that saves to TensorBoard and prints summary."""
-
-    def handler(prof):
-        torch.profiler.tensorboard_trace_handler(output_dir, worker_name)(prof)
-        print(f"\n{'=' * 80}")
-        print(label)
-        print(f"{'=' * 80}")
-        print(prof.key_averages().table(sort_by="cuda_time_total", row_limit=20))
-
-    return handler
-
-
-def run_profile(
-    seq_len: int,
-    num_heads: int,
-    head_dim: int,
-    warmup: int,
-    output_dir: str,
-):
-    """Profile FP8 vs BF16 attention with PyTorch profiler."""
-    attn_fp8, attn_bf16, workspace = _setup_fp8_attention(num_heads, head_dim)
-
-    torch.manual_seed(42)
-    q = torch.randn(
-        seq_len,
-        num_heads,
-        head_dim,
-        device="cuda",
-        dtype=torch.bfloat16,
-    )
-    k = torch.randn_like(q)
-    v = torch.randn_like(q)
-
-    cu_fp8, max_s, seq_l = _build_meta(seq_len, num_heads, head_dim, fp8=True)
-    # we can reuse cu_fp8 for cu_bf16 since q, k, and v are contiguous
-    cu_bf16 = cu_fp8.clone()
-
-    sched = torch.profiler.schedule(wait=0, warmup=warmup, active=1)
-
-    # Profile BF16 (warmup handled by profiler schedule)
-    with profile(
-        activities=[ProfilerActivity.CPU, ProfilerActivity.CUDA],
-        schedule=sched,
-        on_trace_ready=_make_trace_handler(
-            output_dir,
-            f"bf16_h{head_dim}_s{seq_len}",
-            f"BF16 Attention (seq_len={seq_len}, heads={num_heads}, "
-            f"head_dim={head_dim})",
-        ),
-    ) as prof_bf16:
-        for _ in range(warmup + 1):
-            with record_function("bf16_attention"):
-                attn_bf16._forward_flashinfer(
-                    q.clone(), k.clone(), v.clone(), cu_bf16, max_s, seq_l
-                )
-                torch.accelerator.synchronize()
-            prof_bf16.step()
-
-    # Profile FP8 (warmup handled by profiler schedule)
-    with profile(
-        activities=[ProfilerActivity.CPU, ProfilerActivity.CUDA],
-        schedule=sched,
-        on_trace_ready=_make_trace_handler(
-            output_dir,
-            f"fp8_h{head_dim}_s{seq_len}",
-            f"FP8 Attention (seq_len={seq_len}, heads={num_heads}, "
-            f"head_dim={head_dim})",
-        ),
-    ) as prof_fp8:
-        for _ in range(warmup + 1):
-            with record_function("fp8_attention"):
-                attn_fp8._forward_flashinfer(
-                    q.clone(), k.clone(), v.clone(), cu_fp8, max_s, seq_l
-                )
-                torch.accelerator.synchronize()
-            prof_fp8.step()
-
-    print(f"\nTensorBoard traces saved to: {output_dir}")
-    print(f"View with: tensorboard --logdir={output_dir}")
-
-
-if __name__ == "__main__":
-    parser = FlexibleArgumentParser(description="Benchmark FP8 vs BF16 ViT attention.")
-    parser.add_argument(
-        "--seq-lens",
-        type=int,
-        nargs="+",
-        default=DEFAULT_SEQ_LENS,
-        help="Sequence lengths to benchmark",
-    )
-    parser.add_argument(
-        "--num-heads",
-        type=int,
-        default=NUM_HEADS,
-    )
-    parser.add_argument(
-        "--head-dim",
-        type=int,
-        default=HEAD_DIM,
-    )
-    parser.add_argument(
-        "--method",
-        choices=["cupti", "cudagraph"],
-        default="cudagraph",
-        help="GPU timing method: cupti (CUPTI kernel timing) or "
-        "cudagraph (CUDA graph capture/replay). Default: cudagraph",
-    )
-    parser.add_argument(
-        "--warmup",
-        type=int,
-        default=10,
-        help="Warmup iterations (profile mode only)",
-    )
-    parser.add_argument(
-        "--profile",
-        action="store_true",
-        help="Run PyTorch profiler instead of benchmark",
-    )
-    parser.add_argument(
-        "--profile-seq-len",
-        type=int,
-        default=8192,
-        help="Sequence length for profiling (default: 8192)",
-    )
-    parser.add_argument(
-        "--profile-output-dir",
-        type=str,
-        default="./profile_traces",
-        help="Output directory for TensorBoard traces (default: ./profile_traces)",
-    )
-    args = parser.parse_args()
-
-    if args.profile:
-        run_profile(
-            args.profile_seq_len,
-            args.num_heads,
-            args.head_dim,
-            args.warmup,
-            args.profile_output_dir,
-        )
-    else:
-        run_benchmark(
-            args.seq_lens,
-            args.num_heads,
-            args.head_dim,
-            args.method,
-        )

benchmarks/kernels/deepgemm/benchmark_fp8_block_dense_gemm.py

@@ -16,7 +16,6 @@ from vllm.utils.deep_gemm import (
     fp8_gemm_nt,
     per_block_cast_to_fp8,
 )
-from vllm.utils.torch_utils import set_random_seed
 
 
 def benchmark_shape(
@@ -236,7 +235,9 @@ def run_benchmarks(verbose: bool = False):
     torch.backends.cudnn.allow_tf32 = True
 
     # Set seeds for reproducibility
-    set_random_seed(42)
+    torch.manual_seed(42)
+    torch.cuda.manual_seed(42)
+
     # Define benchmark shapes (m, n, k)
     shapes = [
         (8, 4096, 7168),

benchmarks/kernels/ir/bench_ir_ops.py

@@ -1,378 +0,0 @@
-#!/usr/bin/env python3
-# SPDX-License-Identifier: Apache-2.0
-# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
-"""
-Generic benchmark harness for vLLM IR ops.
-
-Usage:
-    python benchmarks/kernels/ir/bench_ir_ops.py
-    python benchmarks/kernels/ir/bench_ir_ops.py --ops rms_norm
-    python benchmarks/kernels/ir/bench_ir_ops.py --ops rms_norm,silu_mul
-    python benchmarks/kernels/ir/bench_ir_ops.py --no-cuda-graph
-    python benchmarks/kernels/ir/bench_ir_ops.py --ops rms_norm --save-path ./results/
-"""
-
-import argparse
-import contextlib
-import csv
-import dataclasses
-import datetime
-import math
-import os
-import subprocess
-import sys
-import tempfile
-
-# Ensure repo root is on sys.path so `benchmarks` is importable as a package.
-_REPO_ROOT = os.path.abspath(os.path.join(os.path.dirname(__file__), "../../.."))
-if _REPO_ROOT not in sys.path:
-    sys.path.insert(0, _REPO_ROOT)
-
-# Suppress noisy C++ warnings from vllm kernel registration (written to fd 2
-# directly by the dynamic linker, so Python-level sys.stderr redirect won't
-# catch them).
-_saved_fd = os.dup(2)
-try:
-    with open(os.devnull, "w") as _devnull:
-        os.dup2(_devnull.fileno(), 2)
-        import torch
-
-        import vllm.kernels  # noqa: E402, F401
-finally:
-    os.dup2(_saved_fd, 2)
-    os.close(_saved_fd)
-
-from tqdm import tqdm  # noqa: E402
-
-from benchmarks.kernels.ir.shapes import SHAPE_CONFIGS  # noqa: E402  # isort: skip
-from vllm.ir.op import IrOp  # noqa: E402
-from vllm.platforms import current_platform  # noqa: E402
-from vllm.triton_utils import triton  # noqa: E402
-
-
-@dataclasses.dataclass(frozen=True)
-class BenchConfig:
-    use_cuda_graph: bool = True
-    warmup: int = 25
-    rep: int = 100
-
-
-def _pkg_version(name: str) -> str:
-    from importlib.metadata import PackageNotFoundError, version
-
-    with contextlib.suppress(PackageNotFoundError):
-        return version(name)
-    return "not installed"
-
-
-_METADATA_LABELS = {
-    "timestamp": "Timestamp",
-    "git_commit": "Git commit",
-    "vllm": "vLLM",
-    "pytorch": "PyTorch",
-    "cuda_runtime": "CUDA runtime",
-    "triton": "Triton",
-    "cutlass": "CUTLASS",
-    "helion": "Helion",
-    "device": "Device",
-    "bench_mode": "Bench mode",
-    "warmup": "Warmup",
-    "rep": "Repetitions",
-}
-
-
-def collect_env_metadata(cfg: BenchConfig) -> dict[str, str]:
-    from vllm.collect_env import get_env_info
-
-    env = get_env_info()
-
-    git_sha = "unknown"
-    with contextlib.suppress(subprocess.CalledProcessError, FileNotFoundError):
-        git_sha = (
-            subprocess.check_output(
-                ["git", "rev-parse", "--short", "HEAD"], stderr=subprocess.DEVNULL
-            )
-            .decode()
-            .strip()
-        )
-
-    device_name = current_platform.get_device_name()
-
-    warmup_note = " ms" if not cfg.use_cuda_graph else " ms (ignored)"
-    rep_note = " replays" if cfg.use_cuda_graph else " ms"
-
-    return {
-        "timestamp": datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"),
-        "git_commit": git_sha,
-        "vllm": str(env.vllm_version),
-        "pytorch": str(env.torch_version),
-        "cuda_runtime": str(env.cuda_runtime_version),
-        "triton": triton.__version__,
-        "cutlass": _pkg_version("nvidia-cutlass-dsl"),
-        "helion": _pkg_version("helion"),
-        "device": device_name,
-        "bench_mode": "cuda_graph" if cfg.use_cuda_graph else "eager",
-        "warmup": f"{cfg.warmup}{warmup_note}",
-        "rep": f"{cfg.rep}{rep_note}",
-    }
-
-
-def print_metadata(metadata: dict[str, str]):
-    print("=" * 60)
-    for key, val in metadata.items():
-        print(f"{_METADATA_LABELS.get(key, key) + ':':<16}{val}")
-    print("=" * 60)
-
-
-def _clone_args(args: tuple) -> tuple:
-    return tuple(a.clone() if isinstance(a, torch.Tensor) else a for a in args)
-
-
-# TODO(gmagogsfm): When the `maybe_inplace` PR lands, ops marked as
-# inplace=True will mutate bench_args across iterations. Both CUDA graph
-# and eager modes will accumulate drift from repeated in-place mutation.
-# We need to re-clone inputs per iteration for inplace ops.
-def _bench_one(fn, args, cfg: BenchConfig) -> float:
-    bench_args = _clone_args(args)
-    bench_fn = lambda: fn(*bench_args)
-
-    if cfg.use_cuda_graph:
-        ms = triton.testing.do_bench_cudagraph(bench_fn, rep=cfg.rep, quantiles=[0.5])
-    else:
-        ms = triton.testing.do_bench(
-            bench_fn, warmup=cfg.warmup, rep=cfg.rep, quantiles=[0.5]
-        )
-    return ms * 1000
-
-
-# TODO(gmagogsfm): Once compiled native implementation lands (#38775),
-# the benchmark baseline should be the compiled native (what vLLM runs by
-# default) rather than the uncompiled native implementation.
-def collect_timings(
-    op: IrOp, shape_configs: list[dict], cfg: BenchConfig
-) -> tuple[list[str], list[str], dict[str, dict[str, float]]]:
-    def fmt(v) -> str:
-        return str(v).split(".")[-1] if isinstance(v, torch.dtype) else str(v)
-
-    case_names = [
-        "_".join(f"{k}={fmt(v)}" for k, v in kwargs.items()) for kwargs in shape_configs
-    ]
-    providers = [n for n, impl in op.impls.items() if impl.supported]
-
-    results: dict[str, dict[str, float]] = {c: {} for c in case_names}
-    for provider in providers:
-        impl = op.impls[provider]
-        desc = f"{op.name} / {provider}"
-        for case_name, kwargs in tqdm(
-            zip(case_names, shape_configs),
-            desc=desc,
-            total=len(case_names),
-            unit=" cases",
-        ):
-            args = op.generate_inputs(**kwargs)
-            if impl.supports_args(*args):
-                results[case_name][provider] = _bench_one(impl.impl_fn, args, cfg)
-            else:
-                results[case_name][provider] = float("nan")
-
-    return case_names, providers, results
-
-
-def analyze_results(
-    op_name: str,
-    case_names: list[str],
-    providers: list[str],
-    results: dict[str, dict[str, float]],
-) -> tuple[list[dict[str, str]], list[dict[str, str]], list[str]]:
-    native_col = "native"
-    non_native = [p for p in providers if p != native_col]
-
-    header_cols = ["case"]
-    for p in providers:
-        header_cols.append(f"{p} (us)")
-    for p in non_native:
-        header_cols.append(f"{p} speedup")
-
-    detail_rows: list[dict[str, str]] = []
-    speedup_data: dict[str, list[tuple[float, str]]] = {p: [] for p in non_native}
-
-    for case_name in case_names:
-        timings = results[case_name]
-        row: dict[str, str] = {"case": case_name}
-
-        for p in providers:
-            val = timings.get(p, float("nan"))
-            row[f"{p} (us)"] = f"{val:.2f}" if not math.isnan(val) else "n/a"
-
-        native_us = timings.get(native_col, float("nan"))
-        for p in non_native:
-            p_us = timings.get(p, float("nan"))
-            if not math.isnan(native_us) and not math.isnan(p_us) and p_us > 0:
-                speedup = native_us / p_us
-                row[f"{p} speedup"] = f"{speedup:.2f}x"
-                speedup_data[p].append((speedup, case_name))
-            else:
-                row[f"{p} speedup"] = "n/a"
-
-        detail_rows.append(row)
-
-    summary_rows: list[dict[str, str]] = []
-    for p in non_native:
-        entries = speedup_data[p]
-        if not entries:
-            continue
-        speedups = [s for s, _ in entries]
-        geomean = math.exp(sum(math.log(s) for s in speedups) / len(speedups))
-        best_val, best_case = max(entries)
-        worst_val, worst_case = min(entries)
-        wins = sum(1 for s in speedups if s > 1.0)
-        losses = sum(1 for s in speedups if s < 1.0)
-        total = len(speedups)
-
-        print(f"\n{p} vs native ({wins}/{total} faster, {losses}/{total} slower):")
-        print(f"  geomean speedup: {geomean:.2f}x")
-        print(f"  best:            {best_val:.2f}x  ({best_case})")
-        print(f"  worst:           {worst_val:.2f}x  ({worst_case})")
-
-        summary_rows.append(
-            {
-                "op": op_name,
-                "provider": p,
-                "geomean_speedup": f"{geomean:.2f}",
-                "best_speedup": f"{best_val:.2f}",
-                "best_case": best_case,
-                "worst_speedup": f"{worst_val:.2f}",
-                "worst_case": worst_case,
-                "wins": str(wins),
-                "losses": str(losses),
-                "total": str(total),
-            }
-        )
-
-    return detail_rows, summary_rows, header_cols
-
-
-def write_csv(path: str, rows: list[dict[str, str]], fieldnames: list[str]):
-    with open(path, "w", newline="") as f:
-        writer = csv.DictWriter(f, fieldnames=fieldnames)
-        writer.writeheader()
-        writer.writerows(rows)
-
-
-def save_results(
-    save_dir: str,
-    op_name: str,
-    detail_rows: list[dict[str, str]],
-    header_cols: list[str],
-    all_summary_rows: list[dict[str, str]],
-    metadata: dict[str, str],
-):
-    write_csv(
-        os.path.join(save_dir, f"{op_name}_detail.csv"),
-        detail_rows,
-        header_cols,
-    )
-    if all_summary_rows:
-        write_csv(
-            os.path.join(save_dir, "summary.csv"),
-            all_summary_rows,
-            list(all_summary_rows[0].keys()),
-        )
-    write_csv(
-        os.path.join(save_dir, "metadata.csv"),
-        [metadata],
-        list(metadata.keys()),
-    )
-
-
-def parse_args():
-    parser = argparse.ArgumentParser(description="Benchmark vLLM IR ops")
-    parser.add_argument(
-        "--ops",
-        type=str,
-        default=None,
-        help="Comma-separated list of op names to benchmark (substring match)",
-    )
-    parser.add_argument(
-        "--no-cuda-graph",
-        action="store_true",
-        help="Disable CUDA graph; use do_bench with L2 cache flushing instead",
-    )
-    parser.add_argument(
-        "--warmup",
-        type=int,
-        default=25,
-        help="Warmup time in ms (do_bench) or ignored with CUDA graph (default: 25)",
-    )
-    parser.add_argument(
-        "--rep",
-        type=int,
-        default=100,
-        help="Repetition time in ms (do_bench) or number of graph replays "
-        "(do_bench_cudagraph) (default: 100)",
-    )
-    parser.add_argument(
-        "--save-path",
-        type=str,
-        default=None,
-        help="Directory to save results (default: auto-created temp dir)",
-    )
-    return parser.parse_args()
-
-
-def main():
-    args = parse_args()
-    cfg = BenchConfig(
-        use_cuda_graph=not args.no_cuda_graph,
-        warmup=args.warmup,
-        rep=args.rep,
-    )
-
-    torch.set_default_device(current_platform.device_type)
-
-    metadata = collect_env_metadata(cfg)
-    print_metadata(metadata)
-
-    timestamp = datetime.datetime.now().strftime("%Y%m%d_%H%M%S")
-    save_dir = args.save_path or os.path.join(
-        tempfile.gettempdir(), f"vllm_ir_bench_{timestamp}"
-    )
-    os.makedirs(save_dir, exist_ok=True)
-
-    op_filters = [f.strip() for f in args.ops.split(",")] if args.ops else None
-    all_summary_rows: list[dict[str, str]] = []
-
-    for op in IrOp.registry.values():
-        if op_filters and not any(f in op.name for f in op_filters):
-            continue
-        if not op.has_input_generator:
-            print(f"Skipping op '{op.name}': no input generator registered")
-            continue
-        if op.name not in SHAPE_CONFIGS:
-            raise RuntimeError(
-                f"No benchmark shape config for op '{op.name}'. "
-                f"Add it to benchmarks/kernels/ir/shapes.py"
-            )
-
-        case_names, providers, results = collect_timings(
-            op, SHAPE_CONFIGS[op.name], cfg
-        )
-        detail_rows, summary_rows, header_cols = analyze_results(
-            op.name, case_names, providers, results
-        )
-        all_summary_rows.extend(summary_rows)
-
-        save_results(
-            save_dir,
-            op.name,
-            detail_rows,
-            header_cols,
-            all_summary_rows,
-            metadata,
-        )
-
-    print(f"\nResults saved to: {save_dir}")
-
-
-if __name__ == "__main__":
-    main()

benchmarks/kernels/ir/shapes.py

@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-# SPDX-FileCopyrightText: Copyright contributors to the vLLM project
-"""
-Shape configurations for IR op benchmarks.
-"""
-
-import torch
-
-NUM_TOKENS = [1, 2, 4, 16, 64, 256, 1024, 4096, 16384]
-COMMON_HIDDEN_SIZES = [
-    2048,  # Llama 3.2 1B, Qwen 3 MoE 30B-A3B, Gemma 3n
-    3072,  # Gemma 7B/9B
-    4096,  # Llama 3 8B, Qwen 3 8B, Mistral 7B
-    5120,  # Llama 4 Scout 17B-16E
-    7168,  # DeepSeek V3
-    8192,  # Llama 3 70B
-    16384,  # Llama 3 405B
-]
-
-# Each entry maps an op name to a list of kwarg dicts that will be passed
-# to that op's registered input generator via op.generate_inputs(**kwargs).
-SHAPE_CONFIGS: dict[str, list[dict]] = {
-    "rms_norm": [
-        {"num_tokens": n, "hidden_size": d, "dtype": dtype}
-        for dtype in [torch.float16, torch.bfloat16, torch.float32]
-        for d in COMMON_HIDDEN_SIZES
-        for n in NUM_TOKENS
-    ],
-}

benchmarks/multi_turn/benchmark_serving_multi_turn.py

@@ -217,7 +217,6 @@ async def send_request(
     min_tokens: int | None = None,
     max_tokens: int | None = None,
     timeout_sec: int = 120,
-    conversation_id: str | None = None,
 ) -> ServerResponse:
     payload = {
         "model": model,
@@ -226,9 +225,6 @@ async def send_request(
         "temperature": 0.0,
     }
 
-    if conversation_id is not None:
-        payload["conversation_id"] = conversation_id
-
     if stream:
         payload["stream"] = True
         payload["stream_options"] = {"include_usage": False}
@@ -423,7 +419,6 @@ async def send_turn(
         min_tokens,
         max_tokens,
         req_args.timeout_sec,
-        conversation_id=conv_id,
     )
 
     if response.valid is False:
@@ -1444,12 +1439,6 @@ async def main() -> None:
         action="store_true",
         help="Export summary to Excel file (optional)",
     )
-    parser.add_argument(
-        "--stats-json-output",
-        type=str,
-        default=None,
-        help="Export per-request stats (ttft_ms, tpot_ms, etc.) to a JSON file",
-    )
     parser.add_argument(
         "-v",
         "--verbose",
@@ -1662,19 +1651,6 @@ async def main() -> None:
         warmup_runtime_sec=warmup_runtime_sec,
     )
 
-    if args.stats_json_output is not None:
-        # Export per-request metrics as a JSON array for downstream analysis.
-        stats_data = [s._asdict() for s in client_metrics]
-        logger.info(
-            f"{Color.GREEN}Writing per-request stats JSON: "
-            f"{args.stats_json_output}{Color.RESET}"
-        )
-        os.makedirs(
-            os.path.dirname(os.path.abspath(args.stats_json_output)), exist_ok=True
-        )
-        with open(args.stats_json_output, "w") as f:
-            json.dump(stats_data, f, indent=2)
-
     if args.output_file is not None:
         # Write a JSON file with the updated conversations
         # The "assistant" content will contain the answers from the tested LLM

cmake/cpu_extension.cmake

@@ -30,21 +30,6 @@ else()
     list(APPEND CXX_COMPILE_FLAGS
         "-fopenmp"
         "-DVLLM_CPU_EXTENSION")
-
-    # locate PyTorch's libgomp (e.g. site-packages/torch.libs/libgomp-947d5fa1.so.1.0.0)
-    # and create a local shim dir with it
-    vllm_prepare_torch_gomp_shim(VLLM_TORCH_GOMP_SHIM_DIR)
-
-    find_library(OPEN_MP
-        NAMES gomp
-        PATHS ${VLLM_TORCH_GOMP_SHIM_DIR}
-        NO_DEFAULT_PATH
-        REQUIRED
-    )
-    # Set LD_LIBRARY_PATH to include the shim dir at build time to use the same libgomp as PyTorch
-    if (OPEN_MP)
-        set(ENV{LD_LIBRARY_PATH} "${VLLM_TORCH_GOMP_SHIM_DIR}:$ENV{LD_LIBRARY_PATH}")
-    endif()
 endif()
 
 if (NOT MACOSX_FOUND)
@@ -161,49 +146,16 @@ elseif (S390_FOUND)
         "-mtune=native")
 elseif (CMAKE_SYSTEM_PROCESSOR MATCHES "riscv64")
     message(STATUS "RISC-V detected")
-    # VLLM_RVV_VLEN selects the target VLEN. Auto-detected from /proc/cpuinfo
-    # by default; override with -DVLLM_RVV_VLEN=128 or -DVLLM_RVV_VLEN=256.
-    if(NOT DEFINED VLLM_RVV_VLEN)
-        # Auto-detect: find the largest zvl<N>b in /proc/cpuinfo isa line.
-        if(EXISTS /proc/cpuinfo)
-            file(READ /proc/cpuinfo _cpuinfo)
-            set(_best 0)
-            foreach(_n IN ITEMS 128 256 512 1024)
-                if(_cpuinfo MATCHES "zvl${_n}b")
-                    set(_best ${_n})
-                endif()
-            endforeach()
-            if(_best GREATER 0)
-                set(VLLM_RVV_VLEN ${_best})
-            endif()
-        endif()
-        # If auto-detect failed (no /proc/cpuinfo or no zvl<N>b reported)
-        # but the compiler supports RVV, require explicit specification.
-        if(NOT DEFINED VLLM_RVV_VLEN AND (RVV_FP16_FOUND OR RVV_BF16_FOUND))
-            message(FATAL_ERROR
-                "RISC-V RVV is available but VLEN could not be auto-detected. "
-                "Please specify VLEN explicitly:\n"
-                "  -DVLLM_RVV_VLEN=128   (for VLEN=128 hardware)\n"
-                "  -DVLLM_RVV_VLEN=256   (for VLEN=256 hardware, e.g. Spacemit X100)\n"
-                "  -DVLLM_RVV_VLEN=0     (force scalar, no RVV)")
-        endif()
-    endif()
-    if(VLLM_RVV_VLEN AND VLLM_RVV_VLEN GREATER 0)
-        message(STATUS "RISC-V RVV VLEN=${VLLM_RVV_VLEN}")
-        if(RVV_BF16_FOUND)
-            message(STATUS "BF16 extension detected")
-            set(MARCH_FLAGS -march=rv64gcv_zvfh_zfbfmin_zvfbfmin_zvl${VLLM_RVV_VLEN}b -mrvv-vector-bits=zvl -mabi=lp64d)
-            add_compile_definitions(RISCV_BF16_SUPPORT)
-        elseif(RVV_FP16_FOUND)
-            message(WARNING "BF16 functionality is not available")
-            set(MARCH_FLAGS -march=rv64gcv_zvfh_zvl${VLLM_RVV_VLEN}b -mrvv-vector-bits=zvl -mabi=lp64d)
-        else()
-            message(STATUS "compile riscv with scalar (no FP16/BF16)")
-            set(MARCH_FLAGS -march=rv64gc)
-        endif()
+    if(RVV_BF16_FOUND)
+        message(STATUS "BF16 extension detected")
+        set(MARCH_FLAGS -march=rv64gcv_zvfh_zfbfmin_zvfbfmin_zvl128b -mrvv-vector-bits=zvl -mabi=lp64d)
+        add_compile_definitions(RISCV_BF16_SUPPORT)
+    elseif (RVV_FP16_FOUND)
+        message(WARNING "BF16 functionality is not available")
+        set(MARCH_FLAGS -march=rv64gcv_zvfh_zvl128b -mrvv-vector-bits=zvl -mabi=lp64d)
     else()
         message(STATUS "compile riscv with scalar")
-        set(MARCH_FLAGS -march=rv64gc)
+        list(APPEND CXX_COMPILE_FLAGS "-march=rv64gc")
     endif()
     list(APPEND CXX_COMPILE_FLAGS ${MARCH_FLAGS})
 else()
@@ -223,6 +175,20 @@ if (ENABLE_X86_ISA OR (ASIMD_FOUND AND NOT APPLE_SILICON_FOUND) OR POWER9_FOUND
         if(NOT NPROC)
             set(NPROC 4)
         endif()
+        # locate PyTorch's libgomp (e.g. site-packages/torch.libs/libgomp-947d5fa1.so.1.0.0)
+        # and create a local shim dir with it
+        vllm_prepare_torch_gomp_shim(VLLM_TORCH_GOMP_SHIM_DIR)
+
+        find_library(OPEN_MP
+            NAMES gomp
+            PATHS ${VLLM_TORCH_GOMP_SHIM_DIR}
+            NO_DEFAULT_PATH
+            REQUIRED
+        )
+        # Set LD_LIBRARY_PATH to include the shim dir at build time to use the same libgomp as PyTorch
+        if (OPEN_MP)
+            set(ENV{LD_LIBRARY_PATH} "${VLLM_TORCH_GOMP_SHIM_DIR}:$ENV{LD_LIBRARY_PATH}")
+        endif()
 
         # Fetch and populate ACL
         if(DEFINED ENV{ACL_ROOT_DIR} AND IS_DIRECTORY "$ENV{ACL_ROOT_DIR}")
@@ -383,7 +349,6 @@ endif()
 set(VLLM_EXT_SRC
     "csrc/cpu/activation.cpp"
     "csrc/cpu/utils.cpp"
-    "csrc/cpu/spec_decode_utils.cpp"
     "csrc/cpu/layernorm.cpp"
     "csrc/cpu/mla_decode.cpp"
     "csrc/cpu/pos_encoding.cpp"
@@ -394,7 +359,6 @@ set(VLLM_EXT_SRC
 if (ASIMD_FOUND AND NOT APPLE_SILICON_FOUND)
     set(VLLM_EXT_SRC
         "csrc/cpu/shm.cpp"
-        "csrc/cpu/activation_lut_bf16.cpp"
         ${VLLM_EXT_SRC})
 endif()
 
@@ -419,7 +383,6 @@ if (ENABLE_X86_ISA)
         "csrc/cpu/cpu_wna16.cpp"
         "csrc/cpu/cpu_fused_moe.cpp"
         "csrc/cpu/utils.cpp"
-        "csrc/cpu/spec_decode_utils.cpp"
         "csrc/cpu/cpu_attn.cpp"
         "csrc/cpu/dnnl_kernels.cpp"
         "csrc/cpu/torch_bindings.cpp"
@@ -432,7 +395,6 @@ if (ENABLE_X86_ISA)
 
     set(VLLM_EXT_SRC_AVX2 
         "csrc/cpu/utils.cpp"
-        "csrc/cpu/spec_decode_utils.cpp"
         "csrc/cpu/cpu_attn.cpp"
         "csrc/cpu/torch_bindings.cpp"
         # TODO: Remove these files

cmake/external_projects/deepgemm.cmake

@@ -1,156 +0,0 @@
-include(FetchContent)
-
-# If DEEPGEMM_SRC_DIR is set, DeepGEMM is built from that directory
-# instead of downloading.
-# It can be set as an environment variable or passed as a cmake argument.
-# The environment variable takes precedence.
-if (DEFINED ENV{DEEPGEMM_SRC_DIR})
-  set(DEEPGEMM_SRC_DIR $ENV{DEEPGEMM_SRC_DIR})
-endif()
-
-if(DEEPGEMM_SRC_DIR)
-  FetchContent_Declare(
-    deepgemm
-    SOURCE_DIR ${DEEPGEMM_SRC_DIR}
-    CONFIGURE_COMMAND ""
-    BUILD_COMMAND ""
-  )
-else()
-  # This ref should be kept in sync with tools/install_deepgemm.sh
-  FetchContent_Declare(
-    deepgemm
-    GIT_REPOSITORY https://github.com/deepseek-ai/DeepGEMM.git
-    GIT_TAG 891d57b4db1071624b5c8fa0d1e51cb317fa709f
-    GIT_SUBMODULES "third-party/cutlass" "third-party/fmt"
-    GIT_PROGRESS TRUE
-    CONFIGURE_COMMAND ""
-    BUILD_COMMAND ""
-  )
-endif()
-
-# Use FetchContent_Populate (not MakeAvailable) to avoid processing
-# DeepGEMM's own CMakeLists.txt which has incompatible find_package calls.
-FetchContent_GetProperties(deepgemm)
-if(NOT deepgemm_POPULATED)
-  FetchContent_Populate(deepgemm)
-endif()
-message(STATUS "DeepGEMM is available at ${deepgemm_SOURCE_DIR}")
-
-# DeepGEMM requires CUDA 12.3+ for SM90, 12.9+ for SM100
-set(DEEPGEMM_SUPPORT_ARCHS)
-if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.3)
-  list(APPEND DEEPGEMM_SUPPORT_ARCHS "9.0a")
-endif()
-if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.9)
-  list(APPEND DEEPGEMM_SUPPORT_ARCHS "10.0f")
-elseif(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8)
-  list(APPEND DEEPGEMM_SUPPORT_ARCHS "10.0a")
-endif()
-
-cuda_archs_loose_intersection(DEEPGEMM_ARCHS
-  "${DEEPGEMM_SUPPORT_ARCHS}" "${CUDA_ARCHS}")
-
-if(DEEPGEMM_ARCHS)
-  message(STATUS "DeepGEMM CUDA architectures: ${DEEPGEMM_ARCHS}")
-
-  find_package(CUDAToolkit REQUIRED)
-
-  #
-  # Build the _C pybind11 extension from DeepGEMM's C++ source.
-  # This is a CXX-only module — CUDA kernels are JIT-compiled at runtime.
-  #
-  Python_add_library(_deep_gemm_C MODULE WITH_SOABI
-    "${deepgemm_SOURCE_DIR}/csrc/python_api.cpp")
-
-  # The pybind11 module name must be _C to match DeepGEMM's Python imports.
-  set_target_properties(_deep_gemm_C PROPERTIES OUTPUT_NAME "_C")
-
-  target_compile_definitions(_deep_gemm_C PRIVATE
-    "-DTORCH_EXTENSION_NAME=_C")
-
-  target_include_directories(_deep_gemm_C PRIVATE
-    "${deepgemm_SOURCE_DIR}/csrc"
-    "${deepgemm_SOURCE_DIR}/deep_gemm/include"
-    "${deepgemm_SOURCE_DIR}/third-party/cutlass/include"
-    "${deepgemm_SOURCE_DIR}/third-party/cutlass/tools/util/include"
-    "${deepgemm_SOURCE_DIR}/third-party/fmt/include")
-
-  target_compile_options(_deep_gemm_C PRIVATE
-    $<$<COMPILE_LANGUAGE:CXX>:-std=c++17>
-    $<$<COMPILE_LANGUAGE:CXX>:-O3>
-    $<$<COMPILE_LANGUAGE:CXX>:-Wno-psabi>
-    $<$<COMPILE_LANGUAGE:CXX>:-Wno-deprecated-declarations>)
-
-  # torch_python is required because DeepGEMM uses pybind11 type casters
-  # for at::Tensor (via PYBIND11_MODULE), unlike vLLM's own extensions which
-  # use torch::Library custom ops.
-  find_library(TORCH_PYTHON_LIBRARY torch_python
-    PATHS "${TORCH_INSTALL_PREFIX}/lib"
-    REQUIRED)
-
-  target_link_libraries(_deep_gemm_C PRIVATE
-    torch ${TORCH_LIBRARIES} "${TORCH_PYTHON_LIBRARY}"
-    CUDA::cudart CUDA::nvrtc)
-
-  # Install the shared library into the vendored package directory
-  install(TARGETS _deep_gemm_C
-    LIBRARY DESTINATION vllm/third_party/deep_gemm
-    COMPONENT _deep_gemm_C)
-
-  #
-  # Vendor DeepGEMM Python package files
-  #
-  install(FILES
-    "${deepgemm_SOURCE_DIR}/deep_gemm/__init__.py"
-    DESTINATION vllm/third_party/deep_gemm
-    COMPONENT _deep_gemm_C)
-
-  install(DIRECTORY "${deepgemm_SOURCE_DIR}/deep_gemm/utils/"
-    DESTINATION vllm/third_party/deep_gemm/utils
-    COMPONENT _deep_gemm_C
-    FILES_MATCHING PATTERN "*.py")
-
-  install(DIRECTORY "${deepgemm_SOURCE_DIR}/deep_gemm/testing/"
-    DESTINATION vllm/third_party/deep_gemm/testing
-    COMPONENT _deep_gemm_C
-    FILES_MATCHING PATTERN "*.py")
-
-  install(DIRECTORY "${deepgemm_SOURCE_DIR}/deep_gemm/legacy/"
-    DESTINATION vllm/third_party/deep_gemm/legacy
-    COMPONENT _deep_gemm_C
-    FILES_MATCHING PATTERN "*.py")
-
-  install(DIRECTORY "${deepgemm_SOURCE_DIR}/deep_gemm/mega/"
-    DESTINATION vllm/third_party/deep_gemm/mega
-    COMPONENT _deep_gemm_C
-    FILES_MATCHING PATTERN "*.py")
-
-  # Generate envs.py (normally generated by DeepGEMM's setup.py build step)
-  file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/deep_gemm_envs.py"
-    "# Pre-installed environment variables\npersistent_envs = dict()\n")
-  install(FILES "${CMAKE_CURRENT_BINARY_DIR}/deep_gemm_envs.py"
-    DESTINATION vllm/third_party/deep_gemm
-    RENAME envs.py
-    COMPONENT _deep_gemm_C)
-
-  #
-  # Install include files needed for JIT compilation at runtime.
-  # The JIT compiler finds these relative to the package directory.
-  #
-
-  # DeepGEMM's own CUDA headers
-  install(DIRECTORY "${deepgemm_SOURCE_DIR}/deep_gemm/include/"
-    DESTINATION vllm/third_party/deep_gemm/include
-    COMPONENT _deep_gemm_C)
-
-  # CUTLASS and CuTe headers (vendored for JIT, separate from vLLM's CUTLASS)
-  install(DIRECTORY "${deepgemm_SOURCE_DIR}/third-party/cutlass/include/"
-    DESTINATION vllm/third_party/deep_gemm/include
-    COMPONENT _deep_gemm_C)
-
-else()
-  message(STATUS "DeepGEMM will not compile: "
-    "unsupported CUDA architecture ${CUDA_ARCHS}")
-  # Create empty target so setup.py doesn't fail on unsupported systems
-  add_custom_target(_deep_gemm_C)
-endif()