[torch.compile] Add compile-only mode

Summary
=======

This PR is on the way to overlapping torch.compile and weight loading. See [design doc]([https://docs.google.com/document/d/1hssZeQv_lJlKqOr0vfpoqEUNn4ASGHVRB9a49yhcY6E/edit?tab=t.0](https://docs.google.com/document/d/1hssZeQv_lJlKqOr0vfpoqEUNn4ASGHVRB9a49yhcY6E/edit?tab=t.0)) and [proof-of-concept PR](https://github.com/vllm-project/vllm/pull/36072) and [RFC](https://github.com/vllm-project/vllm/issues/34956)

- Adds `vllm compile <model> [options]` CLI command and `vllm.compile_model()` Python API
- These APIs populate vLLM's torch.compile cache and do nothing else. A subsequent `vllm serve` call can read from the cache and perform a warm start.
- They also use minimal GPU memory. This is accomplished through a combination of using FakeTensors (tensors with no storage that report device correctly) and Meta tensors (tensors with no storage that report device="meta"). Note that there is still some minimal GPU memory allocation (< 10 Mb, from GPUModelRunner runtime buffers), I did not go track down all of it, but I'm also not sure it matters.
- In the future we can extend "vllm compile" to more than just torch.compile; for example, if vLLM uses triton kernels, or JIT'ed flashinfer kernels, `vllm compile` may also just compile those and saved the compiled artifacts somewhere.

How it works
============
- `FakeModelLoader` wraps the real model loader. It initializes weights on `meta` device and runs weight post-processing on meta tensors.
- Before torch.compile tracing, `swap_meta_params_to_fake()` converts meta params to FakeTensors. This is required so that torch.compile sees Tensors with the correct devices.
- In theory we should also get the FakeModelLoader to give us FakeTensors, but FakeTensors do not yet support the type of Tensor subclasses that vLLM uses.
- We raise the `CompilationDone` exception after cache artifacts are saved to avoid executing with fake tensors. (calling torch.compile performs both the compilation and an initial run of invoking the compiled artifact with the inputs)
- `EngineCore` early-returns after `compile_or_warm_up_model`, skipping KV cache allocation, scheduler, and sampler setup

Test plan
=========
- Added tests for compile_only cold start followed by a warm start. The tests verify that the compile_only cold start uses no GPU memory, and the warm start does end up reading from the cache.

Future work
===========
In the following order:
- add an option to overlap torch.compile and weight loading. The main process will do weight loading while spawning a new process to do compile-only work (that does not use gpu memory)
- Extend this design to more weight loading schemes. For example, we currently support no weight processing. This will involve getting the additional weight processing to support meta tensors.

Signed-off-by: Richard Zou <zou3519@gmail.com>

.buildkite/ci_config_intel.yaml

@@ -0,0 +1,23 @@
+name: vllm_intel_ci
+job_dirs:
+  - ".buildkite/intel_jobs"
+run_all_patterns:
+  - "docker/Dockerfile"
+  - "CMakeLists.txt"
+  - "requirements/common.txt"
+  - "requirements/xpu.txt"
+  - "requirements/build.txt"
+  - "requirements/test.txt"
+  - "setup.py"
+  - "csrc/"
+  - "cmake/"
+run_all_exclude_patterns:
+  - "docker/Dockerfile."
+  - "csrc/cpu/"
+  - "csrc/rocm/"
+  - "cmake/hipify.py"
+  - "cmake/cpu_extension.cmake"
+registries: public.ecr.aws/q9t5s3a7
+repositories:
+  main: "vllm-ci-test-repo"
+  premerge: "vllm-ci-test-repo"

.buildkite/hardware_tests/amd.yaml

@@ -5,6 +5,7 @@ steps:
     depends_on: []
     device: amd_cpu
     no_plugin: true
+    soft_fail: true
     commands:
     - >
       docker build
@@ -20,11 +21,3 @@ steps:
     - docker push "rocm/vllm-ci:${BUILDKITE_COMMIT}"
     env:
       DOCKER_BUILDKIT: "1"
-    retry:
-      automatic:
-        - exit_status: -1  # Agent was lost
-          limit: 1
-        - exit_status: -10  # Agent was lost
-          limit: 1
-        - exit_status: 1  # Machine occasionally fail
-          limit: 1

.buildkite/hardware_tests/cpu.yaml

@@ -13,12 +13,14 @@ steps:
   - tests/kernels/attention/test_cpu_attn.py
   - tests/kernels/moe/test_cpu_fused_moe.py
   - tests/kernels/test_onednn.py
+  - tests/kernels/test_awq_int4_to_int8.py
   commands:
     - |
       bash .buildkite/scripts/hardware_ci/run-cpu-test.sh 20m "
       pytest -x -v -s tests/kernels/attention/test_cpu_attn.py
       pytest -x -v -s tests/kernels/moe/test_cpu_fused_moe.py
-      pytest -x -v -s tests/kernels/test_onednn.py"
+      pytest -x -v -s tests/kernels/test_onednn.py
+      pytest -x -v -s tests/kernels/test_awq_int4_to_int8.py"
 
 - label: CPU-Compatibility Tests
   depends_on: []

.buildkite/image_build/image_build_xpu.sh

@@ -0,0 +1,34 @@
+#!/bin/bash
+set -e
+
+if [[ $# -lt 3 ]]; then
+  echo "Usage: $0 <registry> <repo> <commit>"
+  exit 1
+fi
+
+REGISTRY=$1
+REPO=$2
+BUILDKITE_COMMIT=$3
+
+# authenticate with AWS ECR
+aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin "$REGISTRY"
+aws ecr get-login-password --region us-east-1 | docker login --username AWS --password-stdin 936637512419.dkr.ecr.us-east-1.amazonaws.com
+
+# skip build if image already exists
+if ! docker manifest inspect "$REGISTRY"/"$REPO":"$BUILDKITE_COMMIT"-xpu &> /dev/null; then
+  echo "Image not found, proceeding with build..."
+else
+  echo "Image found"
+  exit 0
+fi
+
+# build
+docker build \
+  --file docker/Dockerfile.xpu \
+  --build-arg max_jobs=16 \
+  --build-arg buildkite_commit="$BUILDKITE_COMMIT" \
+  --tag "$REGISTRY"/"$REPO":"$BUILDKITE_COMMIT"-xpu \
+  --progress plain .
+
+# push
+docker push "$REGISTRY"/"$REPO":"$BUILDKITE_COMMIT"-xpu

.buildkite/intel_jobs/test-intel.yaml

@@ -0,0 +1,64 @@
+group: Intel
+steps:
+  - label: ":docker: Build XPU image"
+    soft_fail: true
+    depends_on: []
+    key: image-build-xpu
+    commands:
+      - bash -lc '.buildkite/image_build/image_build_xpu.sh "public.ecr.aws/q9t5s3a7" "vllm-ci-test-repo" "$BUILDKITE_COMMIT"'
+    env:
+      DOCKER_BUILDKIT: "1"
+    retry:
+      automatic:
+        - exit_status: -1  # Agent was lost
+          limit: 2
+        - exit_status: -10  # Agent was lost
+          limit: 2
+  - label: "XPU example Test"
+    depends_on:
+      - image-build-xpu
+    timeout_in_minutes: 30
+    device: intel_gpu
+    no_plugin: true
+    env:
+      REGISTRY: "public.ecr.aws/q9t5s3a7"
+      REPO: "vllm-ci-test-repo"
+    source_file_dependencies:
+      - vllm/
+      - .buildkite/intel_jobs/test-intel.yaml 
+    commands:
+      - >-
+        bash .buildkite/scripts/hardware_ci/run-intel-test.sh
+        'pip install tblib==3.1.0 &&
+        python3 examples/basic/offline_inference/generate.py --model facebook/opt-125m --block-size 64 --enforce-eager &&
+        python3 examples/basic/offline_inference/generate.py --model facebook/opt-125m --block-size 64 -O3 -cc.cudagraph_mode=NONE &&
+        python3 examples/basic/offline_inference/generate.py --model facebook/opt-125m --block-size 64 --enforce-eager -tp 2 --distributed-executor-backend mp &&
+        python3 examples/basic/offline_inference/generate.py --model facebook/opt-125m --block-size 64 --enforce-eager --attention-backend=TRITON_ATTN &&
+        python3 examples/basic/offline_inference/generate.py --model facebook/opt-125m --block-size 64 --enforce-eager --quantization fp8 &&
+        python3 examples/basic/offline_inference/generate.py --model superjob/Qwen3-4B-Instruct-2507-GPTQ-Int4 --block-size 64 --enforce-eager --max-model-len 8192 &&
+        python3 examples/basic/offline_inference/generate.py --model ibm-research/PowerMoE-3b --block-size 64 --enforce-eager -tp 2 &&
+        python3 examples/basic/offline_inference/generate.py --model ibm-research/PowerMoE-3b --block-size 64 --enforce-eager -tp 2 --enable-expert-parallel'
+  - label: "XPU V1 test"
+    depends_on:
+      - image-build-xpu
+    timeout_in_minutes: 30
+    device: intel_gpu
+    no_plugin: true
+    env:
+      REGISTRY: "public.ecr.aws/q9t5s3a7"
+      REPO: "vllm-ci-test-repo"
+    source_file_dependencies:
+      - vllm/
+      - .buildkite/intel_jobs/test-intel.yaml 
+    commands:
+      - >-
+        bash .buildkite/scripts/hardware_ci/run-intel-test.sh
+        'cd tests &&
+        pytest -v -s v1/core --ignore=v1/core/test_reset_prefix_cache_e2e.py --ignore=v1/core/test_scheduler_e2e.py &&
+        pytest -v -s v1/engine --ignore=v1/engine/test_output_processor.py &&
+        pytest -v -s v1/sample --ignore=v1/sample/test_logprobs.py --ignore=v1/sample/test_logprobs_e2e.py &&
+        pytest -v -s v1/worker --ignore=v1/worker/test_gpu_model_runner.py --ignore=v1/worker/test_worker_memory_snapshot.py &&
+        pytest -v -s v1/structured_output &&
+        pytest -v -s v1/test_serial_utils.py &&
+        pytest -v -s v1/spec_decode --ignore=v1/spec_decode/test_max_len.py --ignore=v1/spec_decode/test_tree_attention.py --ignore=v1/spec_decode/test_speculators_eagle3.py --ignore=v1/spec_decode/test_acceptance_length.py &&
+        pytest -v -s v1/kv_connector/unit --ignore=v1/kv_connector/unit/test_multi_connector.py --ignore=v1/kv_connector/unit/test_nixl_connector.py --ignore=v1/kv_connector/unit/test_example_connector.py --ignore=v1/kv_connector/unit/test_lmcache_integration.py'

.buildkite/performance-benchmarks/tests/serving-tests-arm64-cpu.json

@@ -36,6 +36,7 @@
       "model": "meta-llama/Llama-3.1-8B-Instruct",
       "backend": "vllm",
       "ignore-eos": "",
+      "temperature": 0,
       "num_prompts": 200
     }
   },
@@ -127,4 +128,4 @@
       }
     }
   ]
-}
+}

.buildkite/performance-benchmarks/tests/serving-tests-cpu-asr.json

@@ -22,6 +22,7 @@
       "hf_split": "test",
       "no_stream": "",
       "no_oversample": "",
+      "temperature": 0,
       "num_prompts": 200
     }
   },

.buildkite/performance-benchmarks/tests/serving-tests-cpu-text.json

@@ -26,6 +26,7 @@
       "model": "meta-llama/Llama-3.1-8B-Instruct",
       "backend": "vllm",
       "ignore-eos": "",
+      "temperature": 0,
       "num_prompts": 200
     }
   },

.buildkite/performance-benchmarks/tests/serving-tests-cpu.json

@@ -26,6 +26,7 @@
       "model": "meta-llama/Llama-3.1-8B-Instruct",
       "backend": "vllm",
       "ignore-eos": "",
+      "temperature": 0,
       "num_prompts": 200
     }
   },

.buildkite/performance-benchmarks/tests/serving-tests-hpu.json

@@ -21,6 +21,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200
         }
     },
@@ -47,6 +48,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200
         }
     },
@@ -73,6 +75,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200
         }
     },
@@ -100,6 +103,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200
         }
     },
@@ -127,6 +131,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200
         }
     },
@@ -151,6 +156,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200
         }
     }

.buildkite/performance-benchmarks/tests/serving-tests.json

@@ -13,6 +13,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200
         }
     },
@@ -30,6 +31,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200
         }
     },
@@ -47,6 +49,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200
         }
     },
@@ -67,6 +70,7 @@
             "backend": "vllm",
             "dataset_name": "sharegpt",
             "dataset_path": "./ShareGPT_V3_unfiltered_cleaned_split.json",
+            "temperature": 0,
             "num_prompts": 200 
         }
     }

.buildkite/release-pipeline.yaml

@@ -90,6 +90,14 @@ steps:
         env:
           DOCKER_BUILDKIT: "1"
 
+  - label: "Generate and upload wheel indices"
+    depends_on: "build-wheels"
+    allow_dependency_failure: true
+    agents:
+      queue: cpu_queue_release
+    commands:
+      - "bash .buildkite/scripts/generate-and-upload-nightly-index.sh"
+
   - group: "Build release Docker images"
     key: "build-release-images"
     steps:
@@ -603,7 +611,7 @@ steps:
       - "bash tools/vllm-rocm/generate-rocm-wheels-root-index.sh"
     env:
       S3_BUCKET: "vllm-wheels"
-      VARIANT: "rocm700"
+      VARIANT: "rocm721"
 
   # ROCm Job 6: Build ROCm Release Docker Image
   - label: ":docker: Build release image - x86_64 - ROCm"
@@ -673,6 +681,7 @@ steps:
   - label: "Publish nightly ROCm image to DockerHub"
     depends_on:
       - build-rocm-release-image
+    if: build.env("NIGHTLY") == "1"
     agents:
       queue: small_cpu_queue_release
     commands:

.buildkite/scripts/generate-and-upload-nightly-index.sh

@@ -0,0 +1,84 @@
+#!/usr/bin/env bash
+
+set -ex
+
+# Generate and upload wheel indices for all wheels in the commit directory.
+# This script should run once after all wheels have been built and uploaded.
+
+# ======== setup ========
+
+BUCKET="vllm-wheels"
+INDICES_OUTPUT_DIR="indices"
+DEFAULT_VARIANT_ALIAS="cu129" # align with vLLM_MAIN_CUDA_VERSION in vllm/envs.py
+PYTHON="${PYTHON_PROG:-python3}" # try to read from env var, otherwise use python3
+SUBPATH=$BUILDKITE_COMMIT
+S3_COMMIT_PREFIX="s3://$BUCKET/$SUBPATH/"
+
+# detect if python3.12+ is available
+has_new_python=$($PYTHON -c "print(1 if __import__('sys').version_info >= (3,12) else 0)")
+if [[ "$has_new_python" -eq 0 ]]; then
+    # use new python from docker
+    docker pull python:3-slim
+    PYTHON="docker run --rm -v $(pwd):/app -w /app python:3-slim python3"
+fi
+
+echo "Using python interpreter: $PYTHON"
+echo "Python version: $($PYTHON --version)"
+
+# ======== generate and upload indices ========
+
+# list all wheels in the commit directory
+echo "Existing wheels on S3:"
+aws s3 ls "$S3_COMMIT_PREFIX"
+obj_json="objects.json"
+aws s3api list-objects-v2 --bucket "$BUCKET" --prefix "$SUBPATH/" --delimiter / --output json > "$obj_json"
+mkdir -p "$INDICES_OUTPUT_DIR"
+
+# call script to generate indices for all existing wheels
+# these indices have relative paths that work as long as they are next to the wheel directory in s3
+# i.e., the wheels are always in s3://vllm-wheels/<commit>/
+# and indices can be placed in /<commit>/, or /nightly/, or /<version>/
+alias_args=()
+if [[ -n "$DEFAULT_VARIANT_ALIAS" ]]; then
+    alias_args=(--alias-to-default "$DEFAULT_VARIANT_ALIAS")
+fi
+
+# HACK: we do not need regex module here, but it is required by pre-commit hook
+# To avoid any external dependency, we simply replace it back to the stdlib re module
+sed -i 's/import regex as re/import re/g' .buildkite/scripts/generate-nightly-index.py
+$PYTHON .buildkite/scripts/generate-nightly-index.py --version "$SUBPATH" --current-objects "$obj_json" --output-dir "$INDICES_OUTPUT_DIR" --comment "commit $BUILDKITE_COMMIT" "${alias_args[@]}"
+
+# copy indices to /<commit>/ unconditionally
+echo "Uploading indices to $S3_COMMIT_PREFIX"
+aws s3 cp --recursive "$INDICES_OUTPUT_DIR/" "$S3_COMMIT_PREFIX"
+
+# copy to /nightly/ only if it is on the main branch and not a PR
+if [[ "$BUILDKITE_BRANCH" == "main" && "$BUILDKITE_PULL_REQUEST" == "false" ]]; then
+    echo "Uploading indices to overwrite /nightly/"
+    aws s3 cp --recursive "$INDICES_OUTPUT_DIR/" "s3://$BUCKET/nightly/"
+fi
+
+# detect version from any wheel in the commit directory
+# download the first wheel we find to extract version metadata
+first_wheel_key=$($PYTHON -c "import json; obj=json.load(open('$obj_json')); print(next((c['Key'] for c in obj.get('Contents', []) if c['Key'].endswith('.whl')), ''))")
+if [[ -z "$first_wheel_key" ]]; then
+    echo "Error: No wheels found in $S3_COMMIT_PREFIX"
+    exit 1
+fi
+first_wheel=$(basename "$first_wheel_key")
+aws s3 cp "s3://$BUCKET/${first_wheel_key}" "/tmp/${first_wheel}"
+version=$(unzip -p "/tmp/${first_wheel}" '**/METADATA' | grep '^Version: ' | cut -d' ' -f2)
+rm -f "/tmp/${first_wheel}"
+echo "Version in wheel: $version"
+pure_version="${version%%+*}"
+echo "Pure version (without variant): $pure_version"
+
+# re-generate and copy to /<pure_version>/ only if it does not have "dev" in the version
+if [[ "$version" != *"dev"* ]]; then
+    echo "Re-generating indices for /$pure_version/"
+    rm -rf "${INDICES_OUTPUT_DIR:?}"
+    mkdir -p "$INDICES_OUTPUT_DIR"
+    # wheel-dir is overridden to be the commit directory, so that the indices point to the correct wheel path
+    $PYTHON .buildkite/scripts/generate-nightly-index.py --version "$pure_version" --wheel-dir "$SUBPATH" --current-objects "$obj_json" --output-dir "$INDICES_OUTPUT_DIR" --comment "version $pure_version" "${alias_args[@]}"
+    aws s3 cp --recursive "$INDICES_OUTPUT_DIR/" "s3://$BUCKET/$pure_version/"
+fi

.buildkite/scripts/hardware_ci/run-cpu-distributed-smoke-test.sh

@@ -1,9 +1,10 @@
 #!/bin/bash
 set -euox pipefail
 export VLLM_CPU_CI_ENV=0
+export VLLM_CPU_KVCACHE_SPACE=1 # avoid OOM
 
 echo "--- PP+TP"
-vllm serve meta-llama/Llama-3.2-3B-Instruct -tp=2 -pp=2 &
+vllm serve meta-llama/Llama-3.2-3B-Instruct -tp=2 -pp=2 --max-model-len=4096 &
 server_pid=$!
 timeout 600 bash -c "until curl localhost:8000/v1/models > /dev/null 2>&1; do sleep 1; done" || exit 1
 vllm bench serve \
@@ -23,7 +24,7 @@ if [ "$failed_req" -ne 0 ]; then
 fi
 
 echo "--- DP+TP"
-vllm serve meta-llama/Llama-3.2-3B-Instruct -tp=2 -dp=2 &
+vllm serve meta-llama/Llama-3.2-3B-Instruct -tp=2 -dp=2 --max-model-len=4096 &
 server_pid=$!
 timeout 600 bash -c "until curl localhost:8000/v1/models > /dev/null 2>&1; do sleep 1; done" || exit 1
 vllm bench serve \

.buildkite/scripts/hardware_ci/run-intel-test.sh

@@ -0,0 +1,292 @@
+#!/bin/bash
+
+# This script runs tests inside the Intel XPU docker container.
+# It mirrors the structure of run-amd-test.sh while keeping Intel-specific
+# container setup and allowing commands to be sourced from YAML or env.
+#
+# Command sources (in priority order):
+#   1) VLLM_TEST_COMMANDS env var (preferred, preserves quoting)
+#   2) Positional args (legacy)
+#   3) One or more YAML files with a commands list (test-area style)
+###############################################################################
+set -o pipefail
+
+DRY_RUN=${DRY_RUN:-0}
+if [[ "${1:-}" == "--dry-run" ]]; then
+  DRY_RUN=1
+  shift
+fi
+
+# Export Python path
+export PYTHONPATH=".."
+
+###############################################################################
+# Helper Functions
+###############################################################################
+
+cleanup_docker() {
+  docker_root=$(docker info -f '{{.DockerRootDir}}')
+  if [ -z "$docker_root" ]; then
+    echo "Failed to determine Docker root directory." >&2
+    exit 1
+  fi
+  echo "Docker root directory: $docker_root"
+
+  disk_usage=$(df "$docker_root" | tail -1 | awk '{print $5}' | sed 's/%//')
+  threshold=70
+  if [ "$disk_usage" -gt "$threshold" ]; then
+    echo "Disk usage is above $threshold%. Cleaning up Docker images and volumes..."
+    docker image prune -f
+    docker volume prune -f && docker system prune --force --filter "until=72h" --all
+    echo "Docker images and volumes cleanup completed."
+  else
+    echo "Disk usage is below $threshold%. No cleanup needed."
+  fi
+}
+
+re_quote_pytest_markers() {
+  local input="$1"
+  local output=""
+  local collecting=false
+  local marker_buf=""
+
+  local flat="${input//$'\n'/ }"
+  local restore_glob
+  restore_glob="$(shopt -p -o noglob 2>/dev/null || true)"
+  set -o noglob
+  local -a words
+  read -ra words <<< "$flat"
+  eval "$restore_glob"
+
+  for word in "${words[@]}"; do
+    if $collecting; then
+      if [[ "$word" == *"'"* ]]; then
+        if [[ -n "$marker_buf" ]]; then
+          output+="${marker_buf} "
+          marker_buf=""
+        fi
+        output+="${word} "
+        collecting=false
+        continue
+      fi
+
+      local is_boundary=false
+      case "$word" in
+        "&&"|"||"|";"|"|")
+          is_boundary=true ;;
+        --*)
+          is_boundary=true ;;
+        -[a-zA-Z])
+          is_boundary=true ;;
+        */*)
+          is_boundary=true ;;
+        *.py|*.py::*)
+          is_boundary=true ;;
+        *=*)
+          if [[ "$word" =~ ^[A-Z_][A-Z0-9_]*= ]]; then
+            is_boundary=true
+          fi
+          ;;
+      esac
+
+      if $is_boundary; then
+        if [[ "$marker_buf" == *" "* || "$marker_buf" == *"("* ]]; then
+          output+="'${marker_buf}' "
+        else
+          output+="${marker_buf} "
+        fi
+        collecting=false
+        marker_buf=""
+        if [[ "$word" == "-m" || "$word" == "-k" ]]; then
+          output+="${word} "
+          collecting=true
+        else
+          output+="${word} "
+        fi
+      else
+        if [[ -n "$marker_buf" ]]; then
+          marker_buf+=" ${word}"
+        else
+          marker_buf="${word}"
+        fi
+      fi
+    elif [[ "$word" == "-m" || "$word" == "-k" ]]; then
+      output+="${word} "
+      collecting=true
+      marker_buf=""
+    else
+      output+="${word} "
+    fi
+  done
+
+  if $collecting && [[ -n "$marker_buf" ]]; then
+    if [[ "$marker_buf" == *" "* || "$marker_buf" == *"("* ]]; then
+      output+="'${marker_buf}'"
+    else
+      output+="${marker_buf}"
+    fi
+  fi
+
+  echo "${output% }"
+}
+
+apply_intel_test_overrides() {
+  local cmds="$1"
+  # Placeholder for Intel-specific exclusions/overrides.
+  echo "$cmds"
+}
+
+is_yaml_file() {
+  local p="$1"
+  [[ -f "$p" && "$p" == *.yaml ]]
+}
+
+extract_yaml_commands() {
+  local yaml_path="$1"
+  awk '
+    $1 == "commands:" { in_cmds=1; next }
+    in_cmds && $0 ~ /^[[:space:]]*-[[:space:]]/ {
+      sub(/^[[:space:]]*-[[:space:]]/, "");
+      print;
+      next
+    }
+    in_cmds && $0 ~ /^[^[:space:]]/ { exit }
+  ' "$yaml_path"
+}
+
+###############################################################################
+# Main
+###############################################################################
+
+default_image_name="${REGISTRY}/${REPO}:${BUILDKITE_COMMIT}-xpu"
+#default_image_name="public.ecr.aws/q9t5s3a7/vllm-ci-test-repo:${BUILDKITE_COMMIT}-xpu"
+image_name="${IMAGE_TAG_XPU:-${default_image_name}}"
+container_name="xpu_${BUILDKITE_COMMIT}_$(tr -dc A-Za-z0-9 < /dev/urandom | head -c 10; echo)"
+
+# ---- Command source selection ----
+commands=""
+if [[ -n "${VLLM_TEST_COMMANDS:-}" ]]; then
+  commands="${VLLM_TEST_COMMANDS}"
+  echo "Commands sourced from VLLM_TEST_COMMANDS (quoting preserved)"
+elif [[ $# -gt 0 ]]; then
+  all_yaml=true
+  for arg in "$@"; do
+    if ! is_yaml_file "$arg"; then
+      all_yaml=false
+      break
+    fi
+  done
+
+  if $all_yaml; then
+    for yaml in "$@"; do
+      mapfile -t COMMANDS < <(extract_yaml_commands "$yaml")
+      if [[ ${#COMMANDS[@]} -eq 0 ]]; then
+        echo "Error: No commands found in ${yaml}" >&2
+        exit 1
+      fi
+      for cmd in "${COMMANDS[@]}"; do
+        if [[ -z "$commands" ]]; then
+          commands="${cmd}"
+        else
+          commands+=" && ${cmd}"
+        fi
+      done
+    done
+    echo "Commands sourced from YAML files: $*"
+  else
+    commands="$*"
+    echo "Commands sourced from positional args (legacy mode)"
+  fi
+else
+  SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+  DEFAULT_YAML="${SCRIPT_DIR}/intel-test.yaml"
+  if [[ ! -f "${DEFAULT_YAML}" ]]; then
+    echo "Error: YAML file not found: ${DEFAULT_YAML}" >&2
+    exit 1
+  fi
+  mapfile -t COMMANDS < <(extract_yaml_commands "${DEFAULT_YAML}")
+  if [[ ${#COMMANDS[@]} -eq 0 ]]; then
+    echo "Error: No commands found in ${DEFAULT_YAML}" >&2
+    exit 1
+  fi
+  for cmd in "${COMMANDS[@]}"; do
+    if [[ -z "$commands" ]]; then
+      commands="${cmd}"
+    else
+      commands+=" && ${cmd}"
+    fi
+  done
+  echo "Commands sourced from default YAML: ${DEFAULT_YAML}"
+fi
+
+if [[ -z "$commands" ]]; then
+  echo "Error: No test commands provided." >&2
+  exit 1
+fi
+
+echo "Raw commands: $commands"
+commands=$(re_quote_pytest_markers "$commands")
+echo "After re-quoting: $commands"
+commands=$(apply_intel_test_overrides "$commands")
+echo "Final commands: $commands"
+
+# Dry-run mode prints final commands and exits before Docker.
+if [[ "$DRY_RUN" == "1" ]]; then
+  echo "DRY_RUN=1 set, skipping Docker execution."
+  exit 0
+fi
+
+# --- Docker housekeeping ---
+cleanup_docker
+
+aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin "$REGISTRY"
+aws ecr get-login-password --region us-east-1 | docker login --username AWS --password-stdin 936637512419.dkr.ecr.us-east-1.amazonaws.com
+
+# --- Build or pull test image ---
+IMAGE="${IMAGE_TAG_XPU:-${image_name}}"
+
+echo "Using image: ${IMAGE}"
+
+if docker image inspect "${IMAGE}" >/dev/null 2>&1; then
+  echo "Image already exists locally, skipping pull"
+else
+  echo "Image not found locally, waiting for lock..."
+
+  flock /tmp/docker-pull.lock bash -c "
+    if docker image inspect '${IMAGE}' >/dev/null 2>&1; then
+      echo 'Image already pulled by another runner'
+    else
+      echo 'Pulling image...'
+      timeout 900 docker pull '${IMAGE}'
+    fi
+  "
+
+  echo "Pull step completed"
+fi
+
+remove_docker_container() {
+  docker rm -f "${container_name}" || true
+  docker image rm -f "${image_name}" || true
+  docker system prune -f || true
+}
+trap remove_docker_container EXIT
+
+# --- Single-node job ---
+
+if [[ -z "${ZE_AFFINITY_MASK:-}" ]]; then
+  echo "Warning: ZE_AFFINITY_MASK is not set. Proceeding without device affinity." >&2
+fi
+
+docker run \
+    --device /dev/dri:/dev/dri \
+    --net=host \
+    --ipc=host \
+    --privileged \
+    -v /dev/dri/by-path:/dev/dri/by-path \
+    --entrypoint="" \
+    -e "HF_TOKEN=${HF_TOKEN:-}" \
+    -e "ZE_AFFINITY_MASK=${ZE_AFFINITY_MASK:-}" \
+    -e "CMDS=${commands}" \
+    --name "${container_name}" \
+    "${image_name}" \
+    bash -c 'set -e; echo "ZE_AFFINITY_MASK is ${ZE_AFFINITY_MASK:-}"; eval "$CMDS"'

.buildkite/scripts/hardware_ci/run-xpu-test.sh

@@ -42,6 +42,7 @@ docker run \
     python3 examples/basic/offline_inference/generate.py --model superjob/Qwen3-4B-Instruct-2507-GPTQ-Int4  --block-size 64 --enforce-eager --max-model-len 8192
     python3 examples/basic/offline_inference/generate.py --model ibm-research/PowerMoE-3b  --block-size 64 --enforce-eager -tp 2
     python3 examples/basic/offline_inference/generate.py --model ibm-research/PowerMoE-3b  --block-size 64 --enforce-eager -tp 2 --enable-expert-parallel
+    python3 examples/basic/offline_inference/generate.py --model OPEA/Qwen2.5-0.5B-Instruct-int4-sym-inc --block-size 64 --enforce-eager --max-model-len 8192
     cd tests
     pytest -v -s v1/core --ignore=v1/core/test_reset_prefix_cache_e2e.py --ignore=v1/core/test_scheduler_e2e.py
     pytest -v -s v1/engine

.buildkite/scripts/upload-nightly-wheels.sh

@@ -2,27 +2,14 @@
 
 set -ex
 
-# ======== part 0: setup ========
+# Upload a single wheel to S3 (rename linux -> manylinux).
+# Index generation is handled separately by generate-and-upload-nightly-index.sh.
 
 BUCKET="vllm-wheels"
-INDICES_OUTPUT_DIR="indices"
-DEFAULT_VARIANT_ALIAS="cu129" # align with vLLM_MAIN_CUDA_VERSION in vllm/envs.py
-PYTHON=${PYTHON_PROG:=python3} # try to read from env var, otherwise use python3
 SUBPATH=$BUILDKITE_COMMIT
 S3_COMMIT_PREFIX="s3://$BUCKET/$SUBPATH/"
 
-# detect if python3.10+ is available
-has_new_python=$($PYTHON -c "print(1 if __import__('sys').version_info >= (3,12) else 0)")
-if [[ "$has_new_python" -eq 0 ]]; then
-    # use new python from docker
-    docker pull python:3-slim
-    PYTHON="docker run --rm -v $(pwd):/app -w /app python:3-slim python3"
-fi
-
-echo "Using python interpreter: $PYTHON"
-echo "Python version: $($PYTHON --version)"
-
-# ========= part 1: collect, rename & upload the wheel ==========
+# ========= collect, rename & upload the wheel ==========
 
 # Assume wheels are in artifacts/dist/*.whl
 wheel_files=(artifacts/dist/*.whl)
@@ -52,56 +39,8 @@ echo "Renamed wheel to: $wheel"
 # Extract the version from the wheel
 version=$(unzip -p "$wheel" '**/METADATA' | grep '^Version: ' | cut -d' ' -f2)
 echo "Version in wheel: $version"
-pure_version="${version%%+*}"
-echo "Pure version (without variant): $pure_version"
 
 # copy wheel to its own bucket
 aws s3 cp "$wheel" "$S3_COMMIT_PREFIX"
 
-# ========= part 2: generate and upload indices ==========
-# generate indices for all existing wheels in the commit directory
-# this script might be run multiple times if there are multiple variants being built
-# so we need to guarantee there is little chance for "TOCTOU" issues
-# i.e., one process is generating indices while another is uploading a new wheel
-# so we need to ensure no time-consuming operations happen below
-
-# list all wheels in the commit directory
-echo "Existing wheels on S3:"
-aws s3 ls "$S3_COMMIT_PREFIX"
-obj_json="objects.json"
-aws s3api list-objects-v2 --bucket "$BUCKET" --prefix "$SUBPATH/" --delimiter / --output json > "$obj_json"
-mkdir -p "$INDICES_OUTPUT_DIR"
-
-# call script to generate indices for all existing wheels
-# this indices have relative paths that could work as long as it is next to the wheel directory in s3
-# i.e., the wheels are always in s3://vllm-wheels/<commit>/
-# and indices can be placed in /<commit>/, or /nightly/, or /<version>/
-alias_args=()
-if [[ -n "$DEFAULT_VARIANT_ALIAS" ]]; then
-    alias_args=(--alias-to-default "$DEFAULT_VARIANT_ALIAS")
-fi
-
-# HACK: we do not need regex module here, but it is required by pre-commit hook
-# To avoid any external dependency, we simply replace it back to the stdlib re module
-sed -i 's/import regex as re/import re/g' .buildkite/scripts/generate-nightly-index.py
-$PYTHON .buildkite/scripts/generate-nightly-index.py --version "$SUBPATH" --current-objects "$obj_json" --output-dir "$INDICES_OUTPUT_DIR" --comment "commit $BUILDKITE_COMMIT" "${alias_args[@]}"
-
-# copy indices to /<commit>/ unconditionally
-echo "Uploading indices to $S3_COMMIT_PREFIX"
-aws s3 cp --recursive "$INDICES_OUTPUT_DIR/" "$S3_COMMIT_PREFIX"
-
-# copy to /nightly/ only if it is on the main branch and not a PR 
-if [[ "$BUILDKITE_BRANCH" == "main" && "$BUILDKITE_PULL_REQUEST" == "false" ]]; then
-    echo "Uploading indices to overwrite /nightly/"
-    aws s3 cp --recursive "$INDICES_OUTPUT_DIR/" "s3://$BUCKET/nightly/"
-fi
-
-# re-generate and copy to /<pure_version>/ only if it does not have "dev" in the version
-if [[ "$version" != *"dev"* ]]; then
-    echo "Re-generating indices for /$pure_version/"
-    rm -rf "${INDICES_OUTPUT_DIR:?}/*"
-    mkdir -p "$INDICES_OUTPUT_DIR"
-    # wheel-dir is overridden to be the commit directory, so that the indices point to the correct wheel path
-    $PYTHON .buildkite/scripts/generate-nightly-index.py --version "$pure_version" --wheel-dir "$SUBPATH" --current-objects "$obj_json" --output-dir "$INDICES_OUTPUT_DIR" --comment "version $pure_version" "${alias_args[@]}"
-    aws s3 cp --recursive "$INDICES_OUTPUT_DIR/" "s3://$BUCKET/$pure_version/"
-fi
+echo "Wheel uploaded. Index generation is handled by a separate step."

.buildkite/test-amd.yaml

@@ -812,7 +812,7 @@ steps:
   commands:
   - apt-get update && apt-get install -y curl libsodium23
   - export VLLM_WORKER_MULTIPROC_METHOD=spawn
-  - pytest -v -s model_executor
+  - pytest -v -s model_executor -m '(not slow_test)'
   - pytest -v -s entrypoints/openai/completion/test_tensorizer_entrypoint.py
 
 
@@ -1242,7 +1242,7 @@ steps:
   - vllm/platforms/rocm.py
   commands:
   - TARGET_TEST_SUITE=L4 pytest basic_correctness/ -v -s -m 'distributed(num_gpus=2)'
-  - CUDA_VISIBLE_DEVICES=0,1 pytest -v -s model_executor/model_loader/test_sharded_state_loader.py
+  - CUDA_VISIBLE_DEVICES=0,1 pytest -v -s model_executor/model_loader/test_sharded_state_loader.py -m '(not slow_test)'
   - pytest models/test_transformers.py -v -s -m 'distributed(num_gpus=2)'
   - pytest models/language -v -s -m 'distributed(num_gpus=2)'
   - pytest models/multimodal -v -s -m 'distributed(num_gpus=2)' --ignore models/multimodal/generation/test_whisper.py
@@ -1801,6 +1801,19 @@ steps:
   - tests/v1/e2e
   commands:
     - pytest -v -s v1/e2e/spec_decode/test_spec_decode.py -k "eagle_correctness_heavy"
+  
+
+- label: V1 e2e (4xH100-4xMI325) # TBD
+  timeout_in_minutes: 180
+  mirror_hardwares: [amdexperimental, amdproduction, amdgfx942nightly, amdmi325]
+  agent_pool: mi325_4
+  optional: true
+  source_file_dependencies:
+    - vllm/v1/attention/backends/utils.py
+    - vllm/v1/worker/gpu_model_runner.py
+    - tests/v1/e2e/test_hybrid_chunked_prefill.py
+  commands:
+    - pytest -v -s v1/e2e/test_hybrid_chunked_prefill.py
 
 
 - label: V1 Spec Decode # TBD
@@ -2501,7 +2514,7 @@ steps:
   - tests/models/
   commands:
   - TARGET_TEST_SUITE=L4 pytest basic_correctness/ -v -s -m 'distributed(num_gpus=2)'
-  - CUDA_VISIBLE_DEVICES=0,1 pytest -v -s model_executor/model_loader/test_sharded_state_loader.py
+  - CUDA_VISIBLE_DEVICES=0,1 pytest -v -s model_executor/model_loader/test_sharded_state_loader.py -m '(not slow_test)'
   - pytest models/test_transformers.py -v -s -m 'distributed(num_gpus=2)'
   - pytest models/language -v -s -m 'distributed(num_gpus=2)'
   - pytest models/multimodal -v -s -m 'distributed(num_gpus=2)' --ignore models/multimodal/generation/test_whisper.py

.buildkite/test_areas/benchmarks.yaml

@@ -2,14 +2,6 @@ group: Benchmarks
 depends_on: 
   - image-build
 steps:
-- label: Benchmarks
-  timeout_in_minutes: 20
-  working_dir: "/vllm-workspace/.buildkite"
-  source_file_dependencies:
-  - benchmarks/
-  commands:
-  - bash scripts/run-benchmarks.sh
-
 - label: Benchmarks CLI Test
   timeout_in_minutes: 20
   source_file_dependencies:

.buildkite/test_areas/expert_parallelism.yaml

@@ -8,11 +8,13 @@ steps:
   source_file_dependencies:
   - vllm/distributed/eplb
   - tests/distributed/test_eplb_algo.py
+  - tests/distributed/test_eplb_utils.py
   commands:
   - pytest -v -s distributed/test_eplb_algo.py
+  - pytest -v -s distributed/test_eplb_utils.py
 
-- label: EPLB Execution
-  timeout_in_minutes: 20
+- label: EPLB Execution # 17min
+  timeout_in_minutes: 27
   working_dir: "/vllm-workspace/tests"
   num_devices: 4
   source_file_dependencies:

.buildkite/test_areas/model_executor.yaml

@@ -13,5 +13,5 @@ steps:
   commands:
     - apt-get update && apt-get install -y curl libsodium23
     - export VLLM_WORKER_MULTIPROC_METHOD=spawn
-    - pytest -v -s model_executor
+    - pytest -v -s model_executor -m '(not slow_test)'
     - pytest -v -s entrypoints/openai/completion/test_tensorizer_entrypoint.py

.buildkite/test_areas/models_distributed.yaml

@@ -14,7 +14,7 @@ steps:
   - tests/models/
   commands:
   - TARGET_TEST_SUITE=L4 pytest basic_correctness/ -v -s -m 'distributed(num_gpus=2)'
-  - CUDA_VISIBLE_DEVICES=0,1 pytest -v -s model_executor/model_loader/test_sharded_state_loader.py
+  - CUDA_VISIBLE_DEVICES=0,1 pytest -v -s model_executor/model_loader/test_sharded_state_loader.py -m '(not slow_test)'
   # Avoid importing model tests that cause CUDA reinitialization error
   - pytest models/test_transformers.py -v -s -m 'distributed(num_gpus=2)'
   - pytest models/language -v -s -m 'distributed(num_gpus=2)'

.github/CODEOWNERS

@@ -2,13 +2,15 @@
 # for more info about CODEOWNERS file
 
 # This lists cover the "core" components of vLLM that require careful review
-/vllm/compilation @zou3519 @youkaichao @ProExpertProg @BoyuanFeng
+/vllm/compilation @zou3519 @youkaichao @ProExpertProg @BoyuanFeng @vadiklyutiy
 /vllm/distributed/kv_transfer @NickLucche @ApostaC @orozery
 /vllm/lora @jeejeelee
 /vllm/model_executor/layers/attention @LucasWilkinson @MatthewBonanni
 /vllm/model_executor/layers/fused_moe @mgoin @pavanimajety
 /vllm/model_executor/layers/quantization @mgoin @robertgshaw2-redhat @tlrmchlsmth @yewentao256 @pavanimajety
-/vllm/model_executor/layers/mamba @tdoublep
+/vllm/model_executor/layers/mamba @tdoublep @tomeras91
+/vllm/model_executor/layers/mamba/gdn_linear_attn.py @tdoublep @ZJY0516 @vadiklyutiy
+/vllm/model_executor/layers/rotary_embedding.py @vadiklyutiy
 /vllm/model_executor/model_loader @22quinn
 /vllm/model_executor/layers/batch_invariant.py @yewentao256 
 /vllm/multimodal @DarkLight1337 @ywang96 @NickLucche @tjtanaa
@@ -46,8 +48,9 @@ CMakeLists.txt @tlrmchlsmth @LucasWilkinson
 /vllm/v1/attention @LucasWilkinson @MatthewBonanni
 /vllm/v1/attention/backend.py @WoosukKwon @zhuohan123 @youkaichao @alexm-redhat @njhill
 /vllm/v1/attention/backends/mla @pavanimajety
-/vllm/v1/attention/backends/flashinfer.py @mgoin @pavanimajety
+/vllm/v1/attention/backends/flashinfer.py @mgoin @pavanimajety @vadiklyutiy
 /vllm/v1/attention/backends/triton_attn.py @tdoublep
+/vllm/v1/attention/backends/gdn_attn.py @ZJY0516 @vadiklyutiy
 /vllm/v1/core @WoosukKwon @robertgshaw2-redhat @njhill @ywang96 @alexm-redhat @heheda12345 @ApostaC @orozery
 /vllm/v1/sample @22quinn @houseroad @njhill
 /vllm/v1/spec_decode @benchislett @luccafong @MatthewBonanni
@@ -69,7 +72,7 @@ CMakeLists.txt @tlrmchlsmth @LucasWilkinson
 /tests/distributed/test_pipeline_parallel.py @youkaichao
 /tests/distributed/test_same_node.py @youkaichao
 /tests/entrypoints @DarkLight1337 @robertgshaw2-redhat @aarnphm @NickLucche
-/tests/evals @mgoin
+/tests/evals @mgoin @vadiklyutiy
 /tests/kernels @mgoin @tlrmchlsmth @WoosukKwon @yewentao256
 /tests/models @DarkLight1337 @ywang96
 /tests/multimodal @DarkLight1337 @ywang96 @NickLucche
@@ -80,7 +83,7 @@ CMakeLists.txt @tlrmchlsmth @LucasWilkinson
 /tests/v1/core @WoosukKwon @robertgshaw2-redhat @njhill @ywang96 @alexm-redhat @heheda12345 @ApostaC @orozery
 /tests/weight_loading @mgoin @youkaichao @yewentao256
 /tests/lora @jeejeelee
-/tests/models/language/generation/test_hybrid.py @tdoublep
+/tests/models/language/generation/test_hybrid.py @tdoublep @tomeras91
 /tests/v1/kv_connector/nixl_integration @NickLucche
 /tests/v1/kv_connector @ApostaC @orozery
 /tests/v1/kv_offload @ApostaC @orozery
@@ -124,9 +127,14 @@ mkdocs.yaml @hmellor
 /vllm/platforms/xpu.py @jikunshang
 /docker/Dockerfile.xpu @jikunshang
 
+# Nemotron-specific files
+/vllm/model_executor/models/*nemotron* @tomeras91
+/vllm/transformers_utils/configs/*nemotron* @tomeras91
+/tests/**/*nemotron* @tomeras91
+
 # Qwen-specific files
-/vllm/attention/backends/dual_chunk_flash_attn.py @sighingnow
-/vllm/model_executor/models/qwen* @sighingnow
+/vllm/model_executor/models/qwen* @sighingnow @vadiklyutiy
+/vllm/transformers_utils/configs/qwen* @sighingnow @vadiklyutiy
 
 # MTP-specific files
 /vllm/model_executor/models/deepseek_mtp.py @luccafong
@@ -142,6 +150,7 @@ mkdocs.yaml @hmellor
 # Kernels
 /vllm/v1/attention/ops/chunked_prefill_paged_decode.py @tdoublep
 /vllm/v1/attention/ops/triton_unified_attention.py @tdoublep
+/vllm/model_executor/layers/fla @ZJY0516 @vadiklyutiy
 
 # ROCm related: specify owner with write access to notify AMD folks for careful code review
 /vllm/**/*rocm* @tjtanaa

.github/mergify.yml

@@ -234,6 +234,36 @@ pull_request_rules:
       add:
         - rocm
 
+- name: label-xpu
+  description: Automatically apply intel-gpu label
+  conditions:
+    - label != stale
+    - or:
+      - files~=^docker/Dockerfile.xpu
+      - files~=^\\.buildkite/intel_jobs/
+      - files=\.buildkite/ci_config_intel.yaml
+      - files=vllm/model_executor/layers/fused_moe/xpu_fused_moe.py
+      - files=vllm/model_executor/kernels/linear/mixed_precision/xpu.py
+      - files=vllm/model_executor/kernels/linear/scaled_mm/xpu.py
+      - files=vllm/distributed/device_communicators/xpu_communicator.py
+      - files=vllm/v1/attention/backends/mla/xpu_mla_sparse.py
+      - files=vllm/v1/attention/ops/xpu_mla_sparse.py
+      - files=vllm/v1/worker/xpu_worker.py
+      - files=vllm/v1/worker/xpu_model_runner.py
+      - files=vllm/_xpu_ops.py
+      - files~=^vllm/lora/ops/xpu_ops
+      - files=vllm/lora/punica_wrapper/punica_xpu.py
+      - files=vllm/platforms/xpu.py
+      - title~=(?i)Intel gpu
+      - title~=(?i)XPU
+      - title~=(?i)Intel
+      - title~=(?i)BMG
+      - title~=(?i)Arc
+  actions:
+    label:
+      add:
+        - intel-gpu
+
 - name: label-cpu
   description: Automatically apply cpu label
   conditions:

.pre-commit-config.yaml

@@ -39,7 +39,7 @@ repos:
   rev: 0.11.1
   hooks:
     - id: pip-compile
-      args: [requirements/test.in, -o, requirements/test.txt, --index-strategy, unsafe-best-match, --torch-backend, cu129, --python-platform, x86_64-manylinux_2_28, --python-version, "3.12"]
+      args: [requirements/test.in, -c, requirements/common.txt, -o, requirements/test.txt, --index-strategy, unsafe-best-match, --torch-backend, cu129, --python-platform, x86_64-manylinux_2_28, --python-version, "3.12"]
       files: ^requirements/test\.(in|txt)$
     - id: pip-compile
       alias: pip-compile-rocm

CMakeLists.txt

@@ -309,7 +309,7 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   SET(CUTLASS_ENABLE_HEADERS_ONLY ON CACHE BOOL "Enable only the header library")
 
   # Set CUTLASS_REVISION. Used for FetchContent. Also fixes some bogus messages when building.
-  set(CUTLASS_REVISION "v4.2.1")
+  set(CUTLASS_REVISION "v4.4.2")
 
   # Use the specified CUTLASS source directory for compilation if VLLM_CUTLASS_SRC_DIR is provided
   if (DEFINED ENV{VLLM_CUTLASS_SRC_DIR})
@@ -340,9 +340,6 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
 
   list(APPEND VLLM_EXT_SRC
     "csrc/quantization/awq/gemm_kernels.cu"
-    "csrc/quantization/w8a8/cutlass/scaled_mm_entry.cu"
-    "csrc/quantization/fp4/nvfp4_quant_entry.cu"
-    "csrc/quantization/fp4/nvfp4_scaled_mm_entry.cu"
     "csrc/cutlass_extensions/common.cpp")
 
   set_gencode_flags_for_srcs(
@@ -363,7 +360,7 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   # - sm80 doesn't support fp8 computation
   # - sm90 and sm100 don't support QMMA.16832.F32.E4M3.E4M3 SAAS instruction
   # so we only enable fp8 computation for SM89 (e.g. RTX 40x0)  and 12.0 (e.g. RTX 50x0)
-  cuda_archs_loose_intersection(MARLIN_FP8_ARCHS "8.9;12.0" "${CUDA_ARCHS}")
+  cuda_archs_loose_intersection(MARLIN_FP8_ARCHS "8.9;12.0;12.1" "${CUDA_ARCHS}")
   # marlin arches for other files
   cuda_archs_loose_intersection(MARLIN_OTHER_ARCHS "7.5;8.0+PTX" "${CUDA_ARCHS}")
 
@@ -490,185 +487,6 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
                    " in CUDA target architectures")
   endif()
 
-
-  set(SCALED_MM_3X_ARCHS)
-  # The cutlass_scaled_mm kernels for Hopper (c3x, i.e. CUTLASS 3.x) require
-  # CUDA 12.0 or later
-  cuda_archs_loose_intersection(SCALED_MM_ARCHS "9.0a;" "${CUDA_ARCHS}")
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.0 AND SCALED_MM_ARCHS)
-    set(SRCS
-       "csrc/quantization/w8a8/cutlass/scaled_mm_c3x_sm90.cu"
-       "csrc/quantization/w8a8/cutlass/c3x/scaled_mm_sm90_fp8.cu"
-       "csrc/quantization/w8a8/cutlass/c3x/scaled_mm_sm90_int8.cu"
-       "csrc/quantization/w8a8/cutlass/c3x/scaled_mm_azp_sm90_int8.cu"
-       "csrc/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm90_fp8.cu")
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${SCALED_MM_ARCHS}")
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_SCALED_MM_SM90=1")
-    # Let scaled_mm_c2x know it doesn't need to build these arches
-    list(APPEND SCALED_MM_3X_ARCHS "${SCALED_MM_ARCHS}")
-    message(STATUS "Building scaled_mm_c3x_sm90 for archs: ${SCALED_MM_ARCHS}")
-  else()
-    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.0 AND SCALED_MM_ARCHS)
-      message(STATUS "Not building scaled_mm_c3x_sm90 as CUDA Compiler version is "
-                     "not >= 12.0, we recommend upgrading to CUDA 12.0 or "
-                     "later if you intend on running FP8 quantized models on "
-                     "Hopper.")
-    else()
-      message(STATUS "Not building scaled_mm_c3x_sm90 as no compatible archs found "
-                     "in CUDA target architectures")
-    endif()
-  endif()
-
-
-  # The cutlass_scaled_mm kernels for Geforce Blackwell SM120 (c3x, i.e. CUTLASS 3.x) require
-  # CUDA 12.8 or later
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
-    cuda_archs_loose_intersection(SCALED_MM_ARCHS "12.0f" "${CUDA_ARCHS}")
-  else()
-    cuda_archs_loose_intersection(SCALED_MM_ARCHS "12.0a" "${CUDA_ARCHS}")
-  endif()
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
-    set(SRCS
-      "csrc/quantization/w8a8/cutlass/scaled_mm_c3x_sm120.cu"
-      "csrc/quantization/w8a8/cutlass/c3x/scaled_mm_sm120_fp8.cu"
-      "csrc/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm120_fp8.cu"
-    )
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${SCALED_MM_ARCHS}")
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_SCALED_MM_SM120=1")
-    # Let scaled_mm_c2x know it doesn't need to build these arches
-    list(APPEND SCALED_MM_3X_ARCHS "${SCALED_MM_ARCHS}")
-    message(STATUS "Building scaled_mm_c3x_sm120 for archs: ${SCALED_MM_ARCHS}")
-  else()
-    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
-      message(STATUS "Not building scaled_mm_c3x_sm120 as CUDA Compiler version is "
-                     "not >= 12.8, we recommend upgrading to CUDA 12.8 or "
-                     "later if you intend on running FP8 quantized models on "
-                     "Blackwell.")
-    else()
-      message(STATUS "Not building scaled_mm_c3x_120 as no compatible archs found "
-                     "in CUDA target architectures")
-    endif()
-  endif()
-
-
-  # The cutlass_scaled_mm kernels for Blackwell SM100 (c3x, i.e. CUTLASS 3.x)
-  # require CUDA 12.8 or later
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
-    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0f;11.0f" "${CUDA_ARCHS}")
-  else()
-    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0a;10.1a;10.3a" "${CUDA_ARCHS}")
-  endif()
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
-    set(SRCS
-      "csrc/quantization/w8a8/cutlass/scaled_mm_c3x_sm100.cu"
-      "csrc/quantization/w8a8/cutlass/c3x/scaled_mm_sm100_fp8.cu"
-      "csrc/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm100_fp8.cu"
-    )
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${SCALED_MM_ARCHS}")
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_SCALED_MM_SM100=1")
-    # Let scaled_mm_c2x know it doesn't need to build these arches
-    list(APPEND SCALED_MM_3X_ARCHS "${SCALED_MM_ARCHS}")
-    message(STATUS "Building scaled_mm_c3x_sm100 for archs: ${SCALED_MM_ARCHS}")
-  else()
-    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
-      message(STATUS "Not building scaled_mm_c3x_sm100 as CUDA Compiler version is "
-                     "not >= 12.8, we recommend upgrading to CUDA 12.8 or "
-                     "later if you intend on running FP8 quantized models on "
-                     "Blackwell.")
-    else()
-      message(STATUS "Not building scaled_mm_c3x_100 as no compatible archs found "
-                     "in CUDA target architectures")
-    endif()
-  endif()
-
-  #
-  # For the cutlass_scaled_mm kernels we want to build the c2x (CUTLASS 2.x)
-  # kernels for the remaining archs that are not already built for 3x.
-  # (Build 8.9 for FP8)
-  cuda_archs_loose_intersection(SCALED_MM_2X_ARCHS
-    "7.5;8.0;8.7;8.9+PTX" "${CUDA_ARCHS}")
-  # subtract out the archs that are already built for 3x
-  list(REMOVE_ITEM SCALED_MM_2X_ARCHS ${SCALED_MM_3X_ARCHS})
-  if (SCALED_MM_2X_ARCHS)
-    set(SRCS "csrc/quantization/w8a8/cutlass/scaled_mm_c2x.cu")
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${SCALED_MM_2X_ARCHS}")
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_SCALED_MM_C2X=1")
-    message(STATUS "Building scaled_mm_c2x for archs: ${SCALED_MM_2X_ARCHS}")
-  else()
-    if (SCALED_MM_3X_ARCHS)
-      message(STATUS "Not building scaled_mm_c2x as all archs are already built"
-                     " for and covered by scaled_mm_c3x")
-    else()
-      message(STATUS "Not building scaled_mm_c2x as no compatible archs found "
-                    "in CUDA target architectures")
-    endif()
-  endif()
-
-  # The nvfp4_scaled_mm_sm120 kernels for Geforce Blackwell SM120 require
-  # CUDA 12.8 or later
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
-    cuda_archs_loose_intersection(FP4_ARCHS "12.0f" "${CUDA_ARCHS}")
-  else()
-    cuda_archs_loose_intersection(FP4_ARCHS "12.0a" "${CUDA_ARCHS}")
-  endif()
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND FP4_ARCHS)
-    set(SRCS
-      "csrc/quantization/fp4/nvfp4_quant_kernels.cu"
-      "csrc/quantization/fp4/activation_nvfp4_quant_fusion_kernels.cu"
-      "csrc/quantization/fp4/nvfp4_experts_quant.cu"
-      "csrc/quantization/fp4/nvfp4_scaled_mm_sm120_kernels.cu"
-      "csrc/quantization/fp4/nvfp4_blockwise_moe_kernel.cu")
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${FP4_ARCHS}")
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_NVFP4_SM120=1")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM120=1")
-    message(STATUS "Building NVFP4 for archs: ${FP4_ARCHS}")
-  else()
-    message(STATUS "Not building NVFP4 as no compatible archs were found.")
-    # clear FP4_ARCHS
-    set(FP4_ARCHS)
-  endif()
-
-  # FP4 Archs and flags
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
-    cuda_archs_loose_intersection(FP4_ARCHS "10.0f;11.0f" "${CUDA_ARCHS}")
-  else()
-    cuda_archs_loose_intersection(FP4_ARCHS "10.0a;10.1a;10.3a" "${CUDA_ARCHS}")
-  endif()
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND FP4_ARCHS)
-    set(SRCS
-      "csrc/quantization/fp4/nvfp4_quant_kernels.cu"
-      "csrc/quantization/fp4/activation_nvfp4_quant_fusion_kernels.cu"
-      "csrc/quantization/fp4/nvfp4_experts_quant.cu"
-      "csrc/quantization/fp4/nvfp4_scaled_mm_kernels.cu"
-      "csrc/quantization/fp4/nvfp4_blockwise_moe_kernel.cu")
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${FP4_ARCHS}")
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_NVFP4_SM100=1")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM100=1")
-    message(STATUS "Building NVFP4 for archs: ${FP4_ARCHS}")
-  else()
-    message(STATUS "Not building NVFP4 as no compatible archs were found.")
-    # clear FP4_ARCHS
-    set(FP4_ARCHS)
-  endif()
-
   # CUTLASS MLA Archs and flags
   if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
     cuda_archs_loose_intersection(MLA_ARCHS "10.0f;11.0f;12.0f" "${CUDA_ARCHS}")
@@ -693,55 +511,6 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
     set(MLA_ARCHS)
   endif()
 
-  # CUTLASS MoE kernels
-
-  # The MoE kernel cutlass_moe_mm requires CUDA 12.3 or later (and ONLY works
-  # on Hopper). get_cutlass_(batched_)moe_mm_data should only be compiled
-  # if it's possible to compile MoE kernels that use its output.
-  cuda_archs_loose_intersection(SCALED_MM_ARCHS "9.0a" "${CUDA_ARCHS}")
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.3 AND SCALED_MM_ARCHS)
-    set(SRCS "csrc/quantization/w8a8/cutlass/moe/grouped_mm_c3x_sm90.cu")
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${SCALED_MM_ARCHS}")
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM90=1")
-    message(STATUS "Building grouped_mm_c3x for archs: ${SCALED_MM_ARCHS}")
-  else()
-    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.3 AND SCALED_MM_ARCHS)
-      message(STATUS "Not building grouped_mm_c3x kernels as CUDA Compiler version is "
-                     "not >= 12.3, we recommend upgrading to CUDA 12.3 or later "
-                     "if you intend on running FP8 quantized MoE models on Hopper.")
-    else()
-      message(STATUS "Not building grouped_mm_c3x as no compatible archs found "
-                     "in CUDA target architectures.")
-    endif()
-  endif()
-
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
-    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0f;11.0f" "${CUDA_ARCHS}")
-  else()
-    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0a;10.1a;10.3a" "${CUDA_ARCHS}")
-  endif()
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
-    set(SRCS "csrc/quantization/w8a8/cutlass/moe/grouped_mm_c3x_sm100.cu")
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${SCALED_MM_ARCHS}")
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-    list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM100=1")
-    message(STATUS "Building grouped_mm_c3x for archs: ${SCALED_MM_ARCHS}")
-  else()
-    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
-      message(STATUS "Not building grouped_mm_c3x kernels as CUDA Compiler version is "
-                     "not >= 12.8, we recommend upgrading to CUDA 12.8 or later "
-                     "if you intend on running FP8 quantized MoE models on Blackwell.")
-    else()
-      message(STATUS "Not building grouped_mm_c3x as no compatible archs found "
-                     "in CUDA target architectures.")
-    endif()
-  endif()
-
   # Expert-specialization MXFP8 blockscaled grouped kernels (SM100+).
   if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
     cuda_archs_loose_intersection(ES_MXFP8_GROUPED_MM_ARCHS "10.0f;11.0f" "${CUDA_ARCHS}")
@@ -787,36 +556,6 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
                    "in CUDA target architectures.")
   endif()
 
-  # moe_data.cu is used by all CUTLASS MoE kernels.
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
-    cuda_archs_loose_intersection(CUTLASS_MOE_DATA_ARCHS "9.0a;10.0f;11.0f;12.0f" "${CUDA_ARCHS}")
-  else()
-    cuda_archs_loose_intersection(CUTLASS_MOE_DATA_ARCHS "9.0a;10.0a;10.1a;10.3a;12.0a;12.1a" "${CUDA_ARCHS}")
-  endif()
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.3 AND CUTLASS_MOE_DATA_ARCHS)
-    set(SRCS "csrc/quantization/w8a8/cutlass/moe/moe_data.cu")
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${CUTLASS_MOE_DATA_ARCHS}")
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-    message(STATUS "Building moe_data for archs: ${CUTLASS_MOE_DATA_ARCHS}")
-  else()
-    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.3 AND CUTLASS_MOE_DATA_ARCHS)
-      message(STATUS "Not building moe_data as CUDA Compiler version is "
-                     "not >= 12.3, we recommend upgrading to CUDA 12.3 or later "
-                     "if you intend on running FP8 quantized MoE models on Hopper or Blackwell.")
-    else()
-      message(STATUS "Not building moe_data as no compatible archs found "
-                     "in CUDA target architectures.")
-    endif()
-  endif()
-
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
-    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0f;11.0f" "${CUDA_ARCHS}")
-  else()
-    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0a;10.1a;10.3a" "${CUDA_ARCHS}")
-  endif()
-
   #
   # Machete kernels
 
@@ -887,34 +626,6 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
     endif()
   endif()
 
-  # Only build W4A8 kernels if we are building for something compatible with sm90a
-  cuda_archs_loose_intersection(W4A8_ARCHS "9.0a" "${CUDA_ARCHS}")
-  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.0 AND W4A8_ARCHS)
-    set(SRCS
-       "csrc/quantization/cutlass_w4a8/w4a8_mm_entry.cu"
-       "csrc/quantization/cutlass_w4a8/w4a8_grouped_mm_entry.cu"
-       "csrc/quantization/cutlass_w4a8/w4a8_utils.cu"
-       )
-
-    set_gencode_flags_for_srcs(
-      SRCS "${SRCS}"
-      CUDA_ARCHS "${W4A8_ARCHS}")
-
-    list(APPEND VLLM_EXT_SRC "${SRCS}")
-
-    message(STATUS "Building W4A8 kernels for archs: ${W4A8_ARCHS}")
-  else()
-    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.0
-        AND W4A8_ARCHS)
-      message(STATUS "Not building W4A8 kernels as CUDA Compiler version is "
-                     "not >= 12.0, we recommend upgrading to CUDA 12.0 or "
-                     "later if you intend on running w4a16 quantized models on "
-                     "Hopper.")
-    else()
-      message(STATUS "Not building W4A8 kernels as no compatible archs "
-                     "found in CUDA target architectures")
-    endif()
-  endif()
 
   # Hadacore kernels
   cuda_archs_loose_intersection(HADACORE_ARCHS "8.0+PTX;9.0+PTX" "${CUDA_ARCHS}")
@@ -964,7 +675,12 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   # _C_stable_libtorch extension (ops registered via STABLE_TORCH_LIBRARY)
   #
   set(VLLM_STABLE_EXT_SRC
-    "csrc/libtorch_stable/torch_bindings.cpp")
+    "csrc/libtorch_stable/torch_bindings.cpp"
+    "csrc/cutlass_extensions/common.cpp"
+    "csrc/cuda_utils_kernels.cu"
+    "csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_entry.cu"
+    "csrc/libtorch_stable/quantization/fp4/nvfp4_quant_entry.cu"
+    "csrc/libtorch_stable/quantization/fp4/nvfp4_scaled_mm_entry.cu")
 
   if(VLLM_GPU_LANG STREQUAL "CUDA")
     list(APPEND VLLM_STABLE_EXT_SRC
@@ -979,6 +695,299 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
       CUDA_ARCHS "${CUDA_ARCHS}")
   endif()
 
+  #
+  # CUTLASS scaled_mm kernels (moved from _C to _C_stable_libtorch)
+  #
+  set(SCALED_MM_3X_ARCHS)
+  # The cutlass_scaled_mm kernels for Hopper (c3x, i.e. CUTLASS 3.x) require
+  # CUDA 12.0 or later
+  cuda_archs_loose_intersection(SCALED_MM_ARCHS "9.0a;" "${CUDA_ARCHS}")
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.0 AND SCALED_MM_ARCHS)
+    set(SRCS
+       "csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c3x_sm90.cu"
+       "csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm90_fp8.cu"
+       "csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm90_int8.cu"
+       "csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_azp_sm90_int8.cu"
+       "csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm90_fp8.cu")
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${SCALED_MM_ARCHS}")
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_SCALED_MM_SM90=1")
+    # Let scaled_mm_c2x know it doesn't need to build these arches
+    list(APPEND SCALED_MM_3X_ARCHS "${SCALED_MM_ARCHS}")
+    message(STATUS "Building scaled_mm_c3x_sm90 for archs: ${SCALED_MM_ARCHS}")
+  else()
+    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.0 AND SCALED_MM_ARCHS)
+      message(STATUS "Not building scaled_mm_c3x_sm90 as CUDA Compiler version is "
+                     "not >= 12.0, we recommend upgrading to CUDA 12.0 or "
+                     "later if you intend on running FP8 quantized models on "
+                     "Hopper.")
+    else()
+      message(STATUS "Not building scaled_mm_c3x_sm90 as no compatible archs found "
+                     "in CUDA target architectures")
+    endif()
+  endif()
+
+
+  # The cutlass_scaled_mm kernels for Blackwell SM12x (c3x, i.e. CUTLASS 3.x) require
+  # CUDA 12.8 or later
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
+    cuda_archs_loose_intersection(SCALED_MM_ARCHS "12.0f" "${CUDA_ARCHS}")
+  else()
+    cuda_archs_loose_intersection(SCALED_MM_ARCHS "12.0a;12.1a" "${CUDA_ARCHS}")
+  endif()
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
+    set(SRCS
+      "csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c3x_sm120.cu"
+      "csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm120_fp8.cu"
+      "csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm120_fp8.cu"
+    )
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${SCALED_MM_ARCHS}")
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_SCALED_MM_SM120=1")
+    # Let scaled_mm_c2x know it doesn't need to build these arches
+    list(APPEND SCALED_MM_3X_ARCHS "${SCALED_MM_ARCHS}")
+    message(STATUS "Building scaled_mm_c3x_sm120 for archs: ${SCALED_MM_ARCHS}")
+  else()
+    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
+      message(STATUS "Not building scaled_mm_c3x_sm120 as CUDA Compiler version is "
+                     "not >= 12.8, we recommend upgrading to CUDA 12.8 or "
+                     "later if you intend on running FP8 quantized models on "
+                     "Blackwell.")
+    else()
+      message(STATUS "Not building scaled_mm_c3x_120 as no compatible archs found "
+                     "in CUDA target architectures")
+    endif()
+  endif()
+
+
+  # The cutlass_scaled_mm kernels for Blackwell SM100 (c3x, i.e. CUTLASS 3.x)
+  # require CUDA 12.8 or later
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
+    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0f;11.0f" "${CUDA_ARCHS}")
+  else()
+    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0a;10.1a;10.3a" "${CUDA_ARCHS}")
+  endif()
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
+    set(SRCS
+      "csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c3x_sm100.cu"
+      "csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm100_fp8.cu"
+      "csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm100_fp8.cu"
+    )
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${SCALED_MM_ARCHS}")
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_SCALED_MM_SM100=1")
+    # Let scaled_mm_c2x know it doesn't need to build these arches
+    list(APPEND SCALED_MM_3X_ARCHS "${SCALED_MM_ARCHS}")
+    message(STATUS "Building scaled_mm_c3x_sm100 for archs: ${SCALED_MM_ARCHS}")
+  else()
+    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
+      message(STATUS "Not building scaled_mm_c3x_sm100 as CUDA Compiler version is "
+                     "not >= 12.8, we recommend upgrading to CUDA 12.8 or "
+                     "later if you intend on running FP8 quantized models on "
+                     "Blackwell.")
+    else()
+      message(STATUS "Not building scaled_mm_c3x_100 as no compatible archs found "
+                     "in CUDA target architectures")
+    endif()
+  endif()
+
+  #
+  # For the cutlass_scaled_mm kernels we want to build the c2x (CUTLASS 2.x)
+  # kernels for the remaining archs that are not already built for 3x.
+  # (Build 8.9 for FP8)
+  cuda_archs_loose_intersection(SCALED_MM_2X_ARCHS
+    "7.5;8.0;8.7;8.9+PTX" "${CUDA_ARCHS}")
+  # subtract out the archs that are already built for 3x
+  list(REMOVE_ITEM SCALED_MM_2X_ARCHS ${SCALED_MM_3X_ARCHS})
+  if (SCALED_MM_2X_ARCHS)
+    set(SRCS "csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c2x.cu")
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${SCALED_MM_2X_ARCHS}")
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_SCALED_MM_C2X=1")
+    message(STATUS "Building scaled_mm_c2x for archs: ${SCALED_MM_2X_ARCHS}")
+  else()
+    if (SCALED_MM_3X_ARCHS)
+      message(STATUS "Not building scaled_mm_c2x as all archs are already built"
+                     " for and covered by scaled_mm_c3x")
+    else()
+      message(STATUS "Not building scaled_mm_c2x as no compatible archs found "
+                    "in CUDA target architectures")
+    endif()
+  endif()
+
+  #
+  # CUTLASS MoE kernels (moved from _C to _C_stable_libtorch)
+  #
+
+  # The MoE kernel cutlass_moe_mm requires CUDA 12.3 or later (and ONLY works
+  # on Hopper). get_cutlass_(batched_)moe_mm_data should only be compiled
+  # if it's possible to compile MoE kernels that use its output.
+  cuda_archs_loose_intersection(SCALED_MM_ARCHS "9.0a" "${CUDA_ARCHS}")
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.3 AND SCALED_MM_ARCHS)
+    set(SRCS "csrc/libtorch_stable/quantization/w8a8/cutlass/moe/grouped_mm_c3x_sm90.cu")
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${SCALED_MM_ARCHS}")
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM90=1")
+    message(STATUS "Building grouped_mm_c3x for archs: ${SCALED_MM_ARCHS}")
+  else()
+    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.3 AND SCALED_MM_ARCHS)
+      message(STATUS "Not building grouped_mm_c3x kernels as CUDA Compiler version is "
+                     "not >= 12.3, we recommend upgrading to CUDA 12.3 or later "
+                     "if you intend on running FP8 quantized MoE models on Hopper.")
+    else()
+      message(STATUS "Not building grouped_mm_c3x as no compatible archs found "
+                     "in CUDA target architectures.")
+    endif()
+  endif()
+
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
+    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0f;11.0f" "${CUDA_ARCHS}")
+  else()
+    cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0a;10.1a;10.3a" "${CUDA_ARCHS}")
+  endif()
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
+    set(SRCS "csrc/libtorch_stable/quantization/w8a8/cutlass/moe/grouped_mm_c3x_sm100.cu")
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${SCALED_MM_ARCHS}")
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM100=1")
+    message(STATUS "Building grouped_mm_c3x for archs: ${SCALED_MM_ARCHS}")
+  else()
+    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
+      message(STATUS "Not building grouped_mm_c3x kernels as CUDA Compiler version is "
+                     "not >= 12.8, we recommend upgrading to CUDA 12.8 or later "
+                     "if you intend on running FP8 quantized MoE models on Blackwell.")
+    else()
+      message(STATUS "Not building grouped_mm_c3x as no compatible archs found "
+                     "in CUDA target architectures.")
+    endif()
+  endif()
+
+  # moe_data.cu is used by all CUTLASS MoE kernels.
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
+    cuda_archs_loose_intersection(CUTLASS_MOE_DATA_ARCHS "9.0a;10.0f;11.0f;12.0f" "${CUDA_ARCHS}")
+  else()
+    cuda_archs_loose_intersection(CUTLASS_MOE_DATA_ARCHS "9.0a;10.0a;10.1a;10.3a;12.0a;12.1a" "${CUDA_ARCHS}")
+  endif()
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.3 AND CUTLASS_MOE_DATA_ARCHS)
+    set(SRCS "csrc/libtorch_stable/quantization/w8a8/cutlass/moe/moe_data.cu")
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${CUTLASS_MOE_DATA_ARCHS}")
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+    message(STATUS "Building moe_data for archs: ${CUTLASS_MOE_DATA_ARCHS}")
+  else()
+    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.3 AND CUTLASS_MOE_DATA_ARCHS)
+      message(STATUS "Not building moe_data as CUDA Compiler version is "
+                     "not >= 12.3, we recommend upgrading to CUDA 12.3 or later "
+                     "if you intend on running FP8 quantized MoE models on Hopper or Blackwell.")
+    else()
+      message(STATUS "Not building moe_data as no compatible archs found "
+                     "in CUDA target architectures.")
+    endif()
+  endif()
+
+  #
+  # FP4/NVFP4 kernels (moved from _C to _C_stable_libtorch)
+  #
+
+  # The nvfp4_scaled_mm_sm120 kernels for Blackwell SM12x require
+  # CUDA 12.8 or later
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
+    cuda_archs_loose_intersection(FP4_ARCHS "12.0f" "${CUDA_ARCHS}")
+  else()
+    cuda_archs_loose_intersection(FP4_ARCHS "12.0a;12.1a" "${CUDA_ARCHS}")
+  endif()
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND FP4_ARCHS)
+    set(SRCS
+      "csrc/libtorch_stable/quantization/fp4/nvfp4_quant_kernels.cu"
+      "csrc/libtorch_stable/quantization/fp4/activation_nvfp4_quant_fusion_kernels.cu"
+      "csrc/libtorch_stable/quantization/fp4/nvfp4_experts_quant.cu"
+      "csrc/libtorch_stable/quantization/fp4/nvfp4_scaled_mm_sm120_kernels.cu"
+      "csrc/libtorch_stable/quantization/fp4/nvfp4_blockwise_moe_kernel.cu")
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${FP4_ARCHS}")
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_NVFP4_SM120=1")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM120=1")
+    message(STATUS "Building NVFP4 for archs: ${FP4_ARCHS}")
+  else()
+    message(STATUS "Not building NVFP4 as no compatible archs were found.")
+    # clear FP4_ARCHS
+    set(FP4_ARCHS)
+  endif()
+
+  # FP4 Archs and flags
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
+    cuda_archs_loose_intersection(FP4_ARCHS "10.0f;11.0f" "${CUDA_ARCHS}")
+  else()
+    cuda_archs_loose_intersection(FP4_ARCHS "10.0a;10.1a;10.3a" "${CUDA_ARCHS}")
+  endif()
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND FP4_ARCHS)
+    set(SRCS
+      "csrc/libtorch_stable/quantization/fp4/nvfp4_quant_kernels.cu"
+      "csrc/libtorch_stable/quantization/fp4/activation_nvfp4_quant_fusion_kernels.cu"
+      "csrc/libtorch_stable/quantization/fp4/nvfp4_experts_quant.cu"
+      "csrc/libtorch_stable/quantization/fp4/nvfp4_scaled_mm_kernels.cu"
+      "csrc/libtorch_stable/quantization/fp4/nvfp4_blockwise_moe_kernel.cu")
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${FP4_ARCHS}")
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_NVFP4_SM100=1")
+    list(APPEND VLLM_GPU_FLAGS "-DENABLE_CUTLASS_MOE_SM100=1")
+    message(STATUS "Building NVFP4 for archs: ${FP4_ARCHS}")
+  else()
+    message(STATUS "Not building NVFP4 as no compatible archs were found.")
+    # clear FP4_ARCHS
+    set(FP4_ARCHS)
+  endif()
+
+  #
+  # W4A8 kernels (moved from _C to _C_stable_libtorch)
+  #
+
+  # Only build W4A8 kernels if we are building for something compatible with sm90a
+  cuda_archs_loose_intersection(W4A8_ARCHS "9.0a" "${CUDA_ARCHS}")
+  if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.0 AND W4A8_ARCHS)
+    set(SRCS
+       "csrc/libtorch_stable/quantization/cutlass_w4a8/w4a8_mm_entry.cu"
+       "csrc/libtorch_stable/quantization/cutlass_w4a8/w4a8_grouped_mm_entry.cu"
+       "csrc/libtorch_stable/quantization/cutlass_w4a8/w4a8_utils.cu"
+       )
+
+    set_gencode_flags_for_srcs(
+      SRCS "${SRCS}"
+      CUDA_ARCHS "${W4A8_ARCHS}")
+
+    list(APPEND VLLM_STABLE_EXT_SRC "${SRCS}")
+
+    message(STATUS "Building W4A8 kernels for archs: ${W4A8_ARCHS}")
+  else()
+    if (NOT ${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.0
+        AND W4A8_ARCHS)
+      message(STATUS "Not building W4A8 kernels as CUDA Compiler version is "
+                     "not >= 12.0, we recommend upgrading to CUDA 12.0 or "
+                     "later if you intend on running w4a16 quantized models on "
+                     "Hopper.")
+    else()
+      message(STATUS "Not building W4A8 kernels as no compatible archs "
+                     "found in CUDA target architectures")
+    endif()
+  endif()
+
   message(STATUS "Enabling C_stable extension.")
   define_extension_target(
     _C_stable_libtorch
@@ -987,6 +996,7 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
     SOURCES ${VLLM_STABLE_EXT_SRC}
     COMPILE_FLAGS ${VLLM_GPU_FLAGS}
     ARCHITECTURES ${VLLM_GPU_ARCHES}
+    INCLUDE_DIRECTORIES ${CUTLASS_INCLUDE_DIR} ${CUTLASS_TOOLS_UTIL_INCLUDE_DIR}
     USE_SABI 3
     WITH_SOABI)
 
@@ -1000,6 +1010,10 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   # Needed to use cuda APIs from C-shim
   target_compile_definitions(_C_stable_libtorch PRIVATE
     USE_CUDA)
+
+  # Needed by CUTLASS kernels
+  target_compile_definitions(_C_stable_libtorch PRIVATE
+    CUTLASS_ENABLE_DIRECT_CUDA_DRIVER_CALL=1)
 endif()
 
 #
@@ -1050,7 +1064,7 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   # - sm80 doesn't support fp8 computation
   # - sm90 and sm100 don't support QMMA.16832.F32.E4M3.E4M3 SAAS instruction
   # so we only enable fp8 computation for SM89 (e.g. RTX 40x0)  and 12.0 (e.g. RTX 50x0)
-  cuda_archs_loose_intersection(MARLIN_MOE_FP8_ARCHS "8.9;12.0" "${CUDA_ARCHS}")
+  cuda_archs_loose_intersection(MARLIN_MOE_FP8_ARCHS "8.9;12.0;12.1" "${CUDA_ARCHS}")
   # moe marlin arches for other files
   cuda_archs_loose_intersection(MARLIN_MOE_OTHER_ARCHS "7.5;8.0+PTX" "${CUDA_ARCHS}")
   if (MARLIN_MOE_OTHER_ARCHS)

benchmarks/attention_benchmarks/benchmark.py

@@ -546,10 +546,7 @@ def main():
         args.prefill_backends = yaml_config.get("prefill_backends", None)
 
         # Check for special modes
-        if "mode" in yaml_config:
-            args.mode = yaml_config["mode"]
-        else:
-            args.mode = None
+        args.mode = yaml_config.get("mode", None)
 
         # Batch specs and sizes
         # Support both explicit batch_specs and generated batch_spec_ranges
@@ -572,10 +569,7 @@ def main():
             elif "batch_specs" in yaml_config:
                 args.batch_specs = yaml_config["batch_specs"]
 
-        if "batch_sizes" in yaml_config:
-            args.batch_sizes = yaml_config["batch_sizes"]
-        else:
-            args.batch_sizes = None
+        args.batch_sizes = yaml_config.get("batch_sizes", None)
 
         # Model config
         if "model" in yaml_config:

benchmarks/kernels/benchmark_moe.py

@@ -627,9 +627,8 @@ class BenchmarkWorker:
                 need_device_guard = True
 
         with (
-            torch.accelerator.device_index(self.device_id)
-            if need_device_guard
-            else nullcontext()
+            # Ray restricts each worker to one GPU; use local index 0
+            torch.accelerator.device_index(0) if need_device_guard else nullcontext()
         ):
             for idx, config in enumerate(tqdm(search_space)):
                 try:

cmake/cpu_extension.cmake

@@ -373,6 +373,7 @@ if (ENABLE_X86_ISA)
         "csrc/cpu/sgl-kernels/gemm.cpp"
         "csrc/cpu/sgl-kernels/gemm_int8.cpp"
         "csrc/cpu/sgl-kernels/gemm_fp8.cpp"
+        "csrc/cpu/sgl-kernels/gemm_int4.cpp"
         "csrc/cpu/sgl-kernels/moe.cpp"
         "csrc/cpu/sgl-kernels/moe_int8.cpp"
         "csrc/cpu/sgl-kernels/moe_fp8.cpp")

cmake/external_projects/qutlass.cmake

@@ -32,16 +32,16 @@ endif()
 message(STATUS "[QUTLASS] QuTLASS is available at ${qutlass_SOURCE_DIR}")
 
 if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 13.0)
-  cuda_archs_loose_intersection(QUTLASS_ARCHS "12.0a;10.0f" "${CUDA_ARCHS}")
+  cuda_archs_loose_intersection(QUTLASS_ARCHS "10.0f;12.0f" "${CUDA_ARCHS}")
 else()
-  cuda_archs_loose_intersection(QUTLASS_ARCHS "12.0a;10.0a;10.3a" "${CUDA_ARCHS}")
+  cuda_archs_loose_intersection(QUTLASS_ARCHS "12.0a;12.1a;10.0a;10.3a" "${CUDA_ARCHS}")
 endif()
 
 if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND QUTLASS_ARCHS)
 
   if(QUTLASS_ARCHS MATCHES "10\\.(0a|3a|0f)")
     set(QUTLASS_TARGET_CC 100)
-  elseif(QUTLASS_ARCHS MATCHES "12\\.0a")
+  elseif(QUTLASS_ARCHS MATCHES "12\\.[01][af]?")
     set(QUTLASS_TARGET_CC 120)
   else()
     message(FATAL_ERROR "[QUTLASS] internal error parsing CUDA_ARCHS='${QUTLASS_ARCHS}'.")
@@ -96,7 +96,7 @@ else()
       "[QUTLASS] Skipping build: CUDA 12.8 or newer is required (found ${CMAKE_CUDA_COMPILER_VERSION}).")
   else()
     message(STATUS
-      "[QUTLASS] Skipping build: no supported arch (12.0a / 10.0a) found in "
+      "[QUTLASS] Skipping build: no supported arch (12.0f / 10.0f) found in "
       "CUDA_ARCHS='${CUDA_ARCHS}'.")
   endif()
 endif()

cmake/utils.cmake

@@ -355,8 +355,11 @@ function(cuda_archs_loose_intersection OUT_CUDA_ARCHS SRC_CUDA_ARCHS TGT_CUDA_AR
   list(REMOVE_DUPLICATES _PTX_ARCHS)
   list(REMOVE_DUPLICATES _SRC_CUDA_ARCHS)
 
-  # If x.0a or x.0f is in SRC_CUDA_ARCHS and x.0 is in CUDA_ARCHS then we should
-  # remove x.0a or x.0f from SRC_CUDA_ARCHS and add x.0a or x.0f to _CUDA_ARCHS
+  # Handle architecture-specific suffixes (a/f) for SRC entries.
+  # First try exact base match (x.y), then cross-suffix match (x.ya / x.yf).
+  # For 'f' (family) suffix: if no exact/cross match, fall back to major-version
+  # match — e.g. SRC="12.0f" matches TGT="12.1a" since SM121 is in the SM12x
+  # family. The output uses TGT's value to preserve the user's compilation flags.
   set(_CUDA_ARCHS)
   foreach(_arch ${_SRC_CUDA_ARCHS})
     if(_arch MATCHES "[af]$")
@@ -365,6 +368,38 @@ function(cuda_archs_loose_intersection OUT_CUDA_ARCHS SRC_CUDA_ARCHS TGT_CUDA_AR
       if ("${_base}" IN_LIST TGT_CUDA_ARCHS)
         list(REMOVE_ITEM _TGT_CUDA_ARCHS "${_base}")
         list(APPEND _CUDA_ARCHS "${_arch}")
+      elseif("${_base}a" IN_LIST _TGT_CUDA_ARCHS)
+        list(REMOVE_ITEM _TGT_CUDA_ARCHS "${_base}a")
+        list(APPEND _CUDA_ARCHS "${_base}a")
+      elseif("${_base}f" IN_LIST _TGT_CUDA_ARCHS)
+        list(REMOVE_ITEM _TGT_CUDA_ARCHS "${_base}f")
+        list(APPEND _CUDA_ARCHS "${_base}f")
+      elseif(_arch MATCHES "f$")
+        # Family suffix: match any TGT entry in the same major version family.
+        string(REGEX REPLACE "^([0-9]+)\\..*$" "\\1" _src_major "${_base}")
+        foreach(_tgt ${_TGT_CUDA_ARCHS})
+          string(REGEX REPLACE "[af]$" "" _tgt_base "${_tgt}")
+          string(REGEX REPLACE "^([0-9]+)\\..*$" "\\1" _tgt_major "${_tgt_base}")
+          if(_tgt_major STREQUAL _src_major)
+            list(REMOVE_ITEM _TGT_CUDA_ARCHS "${_tgt}")
+            list(APPEND _CUDA_ARCHS "${_tgt}")
+            break()
+          endif()
+        endforeach()
+      endif()
+    endif()
+  endforeach()
+
+  # Symmetric handling: if TGT has x.ya/f and SRC has x.y (without suffix),
+  # preserve TGT's suffix in the output.
+  set(_tgt_copy ${_TGT_CUDA_ARCHS})
+  foreach(_arch ${_tgt_copy})
+    if(_arch MATCHES "[af]$")
+      string(REGEX REPLACE "[af]$" "" _base "${_arch}")
+      if ("${_base}" IN_LIST _SRC_CUDA_ARCHS)
+        list(REMOVE_ITEM _TGT_CUDA_ARCHS "${_arch}")
+        list(REMOVE_ITEM _SRC_CUDA_ARCHS "${_base}")
+        list(APPEND _CUDA_ARCHS "${_arch}")
       endif()
     endif()
   endforeach()

csrc/cpu/sgl-kernels/common.h

@@ -117,6 +117,14 @@ inline void parallel_for(int n, const func_t& f) {
 #endif
 }
 
+inline int get_thread_num() {
+#if defined(_OPENMP)
+  return omp_get_thread_num();
+#else
+  return 0;
+#endif
+}
+
 // for 1d parallel, use `actual_nth`
 // for 2d parallel, use even nths, e.g. 43->42
 int inline adjust_num_threads(int m) {

csrc/cpu/sgl-kernels/gemm.h

@@ -17,8 +17,8 @@ constexpr int block_size_n() { return 2 * TILE_N; }
 template <typename T> inline bool can_use_brgemm(int M);
 template <> inline bool can_use_brgemm<at::BFloat16>(int M) { return M > 4; }
 template <> inline bool can_use_brgemm<at::Half>(int M) { return true; }
-// TODO: add u8s8 brgemm, this requires PyTorch 2.7
-template <> inline bool can_use_brgemm<int8_t>(int M) { return false; }
+template <> inline bool can_use_brgemm<int8_t>(int M) { return M > 4; }
+template <> inline bool can_use_brgemm<uint8_t>(int M) { return M > 4; }
 template <> inline bool can_use_brgemm<at::Float8_e4m3fn>(int M) { return M > 4; }
 template <> inline bool can_use_brgemm<at::quint4x2>(int M) { return M > 4; }
 
@@ -40,9 +40,17 @@ inline int64_t get_row_size(int64_t K, bool use_int8_w8a8) {
   return use_int8_w8a8 ? K + sizeof(int32_t) : K;
 }
 
-// pack weight to vnni format
+inline int64_t get_4bit_block_k_size(int64_t group_size) {
+  return group_size > 128 ? 128 : group_size;
+}
+
+// pack weight into vnni format
 at::Tensor convert_weight_packed(at::Tensor& weight);
 
+// pack weight to vnni format for int4 (adapted from sglang)
+std::tuple<at::Tensor, at::Tensor, at::Tensor>
+convert_weight_packed_scale_zp(at::Tensor qweight, at::Tensor qzeros, at::Tensor scales);
+
 // moe implementations for int8 w8a8
 template <typename scalar_t>
 void fused_experts_int8_kernel_impl(
@@ -233,6 +241,31 @@ void tinygemm_kernel(
     int64_t strideBs,
     bool brg);
 
+// int4 scaled GEMM (adapted from sglang)
+at::Tensor int4_scaled_mm_cpu(
+    at::Tensor& x, at::Tensor& w, at::Tensor& w_zeros, at::Tensor& w_scales, std::optional<at::Tensor> bias);
+
+// int4 tinygemm kernel interface(adapted from sglang)
+template <typename scalar_t>
+void tinygemm_kernel(
+    scalar_t* C,
+    float* C_temp,
+    const uint8_t* A,
+    const float* scales_a,
+    const int32_t* qzeros_a,
+    const uint8_t* B,
+    const float* scales_b,
+    const int8_t* qzeros_b,
+    const int32_t* compensation,
+    int8_t* dqB_tmp,
+    int64_t M,
+    int64_t K,
+    int64_t lda,
+    int64_t ldc_f,
+    int64_t ldc_s,
+    bool store_out,
+    bool use_brgemm);
+
 // TODO: debug print, remove me later
 inline void print_16x32i(const __m512i x) {
   int32_t a[16];

csrc/cpu/sgl-kernels/gemm_int4.cpp

@@ -0,0 +1,755 @@
+// SPDX-License-Identifier: Apache-2.0
+// Adapted from sgl-project/sglang
+// https://github.com/sgl-project/sglang/pull/8226
+
+#include <ATen/ATen.h>
+
+#include "common.h"
+#include "gemm.h"
+#include "vec.h"
+
+namespace {
+
+#define BLOCK_N block_size_n()
+#define BLOCK_M 128
+
+template <bool sym_quant_act>
+struct ActDtype;
+template <>
+struct ActDtype<true> {
+  using type = int8_t;
+};
+template <>
+struct ActDtype<false> {
+  using type = uint8_t;
+};
+
+struct alignas(32) m256i_wrapper {
+  __m256i data;
+};
+
+#if defined(CPU_CAPABILITY_AVX512)
+inline std::array<m256i_wrapper, 2> load_zps_4vnni(
+    const int8_t* __restrict__ zps) {
+  __m256i vzps_low = _mm256_set1_epi64x(*reinterpret_cast<const int64_t*>(zps));
+  __m256i vzps_high =
+      _mm256_set1_epi64x(*reinterpret_cast<const int64_t*>(zps + 8));
+  __m256i shuffle_mask =
+      _mm256_set_epi8(7, 7, 7, 7, 6, 6, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 3, 3, 3,
+                      3, 2, 2, 2, 2, 1, 1, 1, 1, 0, 0, 0, 0);
+  vzps_low = _mm256_shuffle_epi8(vzps_low, shuffle_mask);
+  vzps_high = _mm256_shuffle_epi8(vzps_high, shuffle_mask);
+  m256i_wrapper vzps_low_wp, vzps_high_wp;
+  vzps_low_wp.data = vzps_low;
+  vzps_high_wp.data = vzps_high;
+  return {vzps_low_wp, vzps_high_wp};
+}
+
+inline std::array<m256i_wrapper, 2> load_uint4_as_int8(
+    const uint8_t* __restrict__ qB) {
+  __m256i packed = _mm256_loadu_si256(reinterpret_cast<const __m256i*>(qB));
+  const __m256i low_mask = _mm256_set1_epi8(0x0f);
+  __m256i high = _mm256_srli_epi16(packed, 4);
+  high = _mm256_and_si256(high, low_mask);
+  __m256i low = _mm256_and_si256(packed, low_mask);
+  m256i_wrapper low_wp, high_wp;
+  low_wp.data = low;
+  high_wp.data = high;
+  return {low_wp, high_wp};
+}
+
+template <int N, int ldb>
+void _dequant_weight_zp_only(const uint8_t* __restrict__ B, int8_t* dqB,
+                             const int8_t* __restrict__ qzeros, int64_t K) {
+  #pragma GCC unroll 2
+  for (int n = 0; n < N; n += 16) {
+    auto [zps_low_wp, zps_high_wp] = load_zps_4vnni(&qzeros[n]);
+    auto zps_low = zps_low_wp.data;
+    auto zps_high = zps_high_wp.data;
+    for (int k = 0; k < K; k += 4) {
+      auto [vb_low_wp, vb_high_wp] =
+          load_uint4_as_int8(B + ldb * k + n / 2 * 4);
+      auto vb_low = vb_low_wp.data;
+      auto vb_high = vb_high_wp.data;
+      vb_high = _mm256_sub_epi8(vb_high, zps_high);
+      vb_low = _mm256_sub_epi8(vb_low, zps_low);
+      _mm256_storeu_si256(reinterpret_cast<__m256i_u*>(dqB + N * k + n * 4),
+                          vb_low);
+      _mm256_storeu_si256(
+          reinterpret_cast<__m256i_u*>(dqB + N * k + (n + 8) * 4), vb_high);
+    }
+  }
+}
+
+template <bool sym_quant_act, int N, bool accum>
+void _dequant_and_store(float* __restrict__ output,
+                        const int32_t* __restrict__ input,
+                        const float* __restrict__ scale_a,
+                        const int32_t* __restrict__ zp_a,
+                        const float* __restrict__ scale_b,
+                        const int32_t* __restrict__ comp_b, int M, int ldi,
+                        int ldo, int ldsa = 1) {
+  for (int m = 0; m < M; ++m) {
+    float a_scale = *(scale_a + m * ldsa);
+    __m512 va_scale = _mm512_set1_ps(a_scale);
+    int32_t a_zp;
+    __m512i va_zp;
+    if constexpr (!sym_quant_act) {
+      a_zp = *(zp_a + m * ldsa);
+      va_zp = _mm512_set1_epi32(a_zp);
+    }
+    int n = 0;
+  #pragma GCC unroll 2
+    for (; n < N; n += 16) {
+      __m512i vc = _mm512_loadu_si512(input + m * ldi + n);
+      if constexpr (!sym_quant_act) {
+        __m512i vb_comp = _mm512_loadu_si512(comp_b + n);
+        vc = _mm512_sub_epi32(vc, _mm512_mullo_epi32(vb_comp, va_zp));
+      }
+      __m512 vc_f = _mm512_cvtepi32_ps(vc);
+      __m512 vc_f_mul = _mm512_mul_ps(vc_f, va_scale);
+      __m512 vb_s = _mm512_loadu_ps(scale_b + n);
+      vc_f_mul = _mm512_mul_ps(vc_f_mul, vb_s);
+      if constexpr (accum) {
+        __m512 vo = _mm512_loadu_ps(output + m * ldo + n);
+        _mm512_storeu_ps(output + m * ldo + n, _mm512_add_ps(vo, vc_f_mul));
+      } else {
+        _mm512_storeu_ps(output + m * ldo + n, vc_f_mul);
+      }
+    }
+    for (; n < N; ++n) {
+      float dq_val;
+      if constexpr (sym_quant_act) {
+        dq_val = (float)input[m * ldi + n] * a_scale * scale_b[n];
+      } else {
+        dq_val = (float)(input[m * ldi + n] - a_zp * comp_b[n]) * a_scale *
+                 scale_b[n];
+      }
+      if constexpr (accum) {
+        output[m * ldo + n] += dq_val;
+      } else {
+        output[m * ldo + n] = dq_val;
+      }
+    }
+  }
+}
+
+#else
+template <int N, int ldb>
+void _dequant_weight_zp_only(const uint8_t* B, int8_t* dqB,
+                             const int8_t* qzeros, int64_t K) {
+  for (int k = 0; k < K; ++k) {
+    for (int n = 0; n < N / 2; ++n) {
+      int32_t b = (int32_t)B[k * ldb + n];
+      dqB[k * N + n * 2] = (b & 0xf) - qzeros[n];
+      dqB[k * N + n * 2 + 1] = (b >> 4) - qzeros[n];
+    }
+  }
+}
+#endif
+
+#if defined(CPU_CAPABILITY_AVX512)
+inline __m512i combine_m256i(__m256i a, __m256i b) {
+  __m512i c = _mm512_castsi256_si512(a);
+  return _mm512_inserti64x4(c, b, 1);
+}
+
+inline __m512i combine_m256i(std::array<m256i_wrapper, 2> two_256) {
+  return combine_m256i(two_256[0].data, two_256[1].data);
+}
+
+static inline __m512i _mm512_sign_epi8(__m512i a, __m512i b) {
+  __m512i zero = _mm512_setzero_si512();
+  __mmask64 blt0 = _mm512_movepi8_mask(b);
+  return _mm512_mask_sub_epi8(a, blt0, zero, a);
+}
+
+template <bool sym_quant_act, int M, int N, int ldb>
+void _dequant_gemm_accum_small_M(float* __restrict__ C, const uint8_t* A,
+                                 const float* scales_a, const int32_t* qzeros_a,
+                                 const uint8_t* B, const float* scales_b,
+                                 const int8_t* qzeros_b, int64_t K, int64_t lda,
+                                 int64_t ldc) {
+  constexpr int COLS = N / 16;
+  __m512i ones = _mm512_set1_epi8(1);
+  __m512i va;
+  __m512i vb[COLS];
+  __m512i vc[M * COLS];
+  __m512 vscales[COLS];
+  __m512i vzps[COLS];
+  __m512i vcompensate[COLS];
+
+  Unroll<COLS>{}([&](auto i) {
+    vscales[i] = _mm512_loadu_ps(scales_b + i * 16);
+    vzps[i] = combine_m256i(load_zps_4vnni(qzeros_b + i * 16));
+    if constexpr (!sym_quant_act) {
+      vcompensate[i] = _mm512_setzero_epi32();
+    }
+  });
+  Unroll<M * COLS>{}([&](auto i) { vc[i] = _mm512_setzero_epi32(); });
+
+  auto compute = [&](auto i, int k) {
+    constexpr const int row = i / COLS;
+    constexpr const int col = i % COLS;
+
+    if constexpr (col == 0) {
+      va = _mm512_set1_epi32(*(int32_t*)(A + row * lda + k));
+    }
+
+    if constexpr (row == 0) {
+      int B_offset = k * ldb + col * 16 * 2;
+      vb[col] = combine_m256i(load_uint4_as_int8(B + B_offset));
+      vb[col] = _mm512_sub_epi8(vb[col], vzps[col]);
+      if constexpr (!sym_quant_act) {
+        vcompensate[col] = _mm512_dpbusd_epi32(vcompensate[col], ones, vb[col]);
+      }
+      _mm_prefetch(B + B_offset + 128 * ldb, _MM_HINT_T0);
+    }
+    if constexpr (sym_quant_act) {
+      auto vsb = _mm512_sign_epi8(vb[col], va);
+      auto vabsa = _mm512_sign_epi8(va, va);
+      vc[i] = _mm512_dpbusds_epi32(vc[i], vabsa, vsb);
+    } else {
+      vc[i] = _mm512_dpbusd_epi32(vc[i], va, vb[col]);
+    }
+  };
+
+  constexpr const int unroll = 4;
+  int k = 0;
+  for (; k < K / 4 / unroll; k++) {
+    Unroll<unroll>{}(
+        [&](auto i) { Unroll<M * COLS>{}(compute, 4 * (k * unroll + i)); });
+  }
+  k *= 4 * unroll;
+  for (; k < K; k += 4) {
+    Unroll<M * COLS>{}(compute, k);
+  }
+
+  auto store = [&](auto i) {
+    constexpr const int row = i / COLS;
+    constexpr const int col = i % COLS;
+    __m512 vc_float;
+    if constexpr (!sym_quant_act) {
+      vc[i] = _mm512_sub_epi32(
+          vc[i], _mm512_mullo_epi32(vcompensate[col],
+                                    _mm512_set1_epi32(*(qzeros_a + row))));
+    }
+    vc_float = _mm512_cvtepi32_ps(vc[i]);
+    vc_float = _mm512_mul_ps(vc_float, _mm512_set1_ps(*(scales_a + row)));
+
+    vc_float = _mm512_mul_ps(vc_float, vscales[col]);
+    auto vc_old = _mm512_loadu_ps(C + row * ldc + col * 16);
+    vc_float = _mm512_add_ps(vc_float, vc_old);
+    _mm512_storeu_ps(C + row * ldc + col * 16, vc_float);
+  };
+  Unroll<M * COLS>{}(store);
+}
+
+  #define CALL_DEQUANT_GEMM_ACCUM_SMALL_M(M)               \
+    _dequant_gemm_accum_small_M<sym_quant_act, M, N, ldb>( \
+        C, A, scales_a, qzeros_a, B, scales_b, qzeros_b, K, lda, ldc);
+#endif
+
+template <bool sym_quant_act, int N, int ldb>
+void _dequant_gemm_accum(float* C, const uint8_t* A, const float* scales_a,
+                         const int32_t* qzeros_a, const uint8_t* B,
+                         const float* scales_b, const int8_t* qzeros_b,
+                         const int32_t* compensation, int8_t* dqB, int64_t M,
+                         int64_t K, int64_t lda, int64_t ldc, bool use_brgemm) {
+#if defined(CPU_CAPABILITY_AVX512)
+  if (!use_brgemm) {
+    switch (M) {
+      case 1:
+        CALL_DEQUANT_GEMM_ACCUM_SMALL_M(1);
+        break;
+      case 2:
+        CALL_DEQUANT_GEMM_ACCUM_SMALL_M(2);
+        break;
+      case 3:
+        CALL_DEQUANT_GEMM_ACCUM_SMALL_M(3);
+        break;
+      case 4:
+        CALL_DEQUANT_GEMM_ACCUM_SMALL_M(4);
+        break;
+      default:
+        TORCH_CHECK(false, "tinygemm_kernel: unexpected M for AVX path!");
+    }
+    return;
+  }
+
+  _dequant_weight_zp_only<N, ldb>(B, dqB, qzeros_b, K);
+  using Tin = typename ActDtype<sym_quant_act>::type;
+  Tin* A_ptr = (Tin*)A;
+  if (use_brgemm) {
+    int32_t C_i32[M * N];
+    at::native::cpublas::brgemm(M, N, K, lda, N /*ldb*/, N /*ldc*/,
+                                false /* add_C */, A_ptr, dqB, C_i32,
+                                true /* is_vnni */);
+    _mm_prefetch(B + N * K / 2, _MM_HINT_T0);
+    _mm_prefetch(A + K, _MM_HINT_T0);
+    _dequant_and_store<sym_quant_act, N, true>(C, C_i32, scales_a, qzeros_a,
+                                               scales_b, compensation, M,
+                                               N /*ldi*/, ldc, 1 /*ldsa*/);
+  } else
+#endif
+  {
+    TORCH_CHECK(false, "tinygemm_kernel: scalar path not implemented!");
+  }
+}
+
+template <int N>
+inline void copy_bias(const float* bias_ptr, float* y_buf, int64_t m) {
+  if (bias_ptr) {
+    for (int i = 0; i < m; ++i) {
+      int j = 0;
+#if defined(CPU_CAPABILITY_AVX512)
+  #pragma GCC unroll 2
+      for (; j < N; j += 16) {
+        __m512 bias_vec = _mm512_loadu_ps(bias_ptr + j);
+        _mm512_storeu_ps(y_buf + i * N + j, bias_vec);
+      }
+#endif
+      for (; j < N; ++j) {
+        y_buf[i * N + j] = bias_ptr[j];
+      }
+    }
+  } else {
+    for (int i = 0; i < m; ++i) {
+      int j = 0;
+#if defined(CPU_CAPABILITY_AVX512)
+  #pragma GCC unroll 2
+      for (; j < N; j += 16) {
+        __m512 zero_vec = _mm512_setzero_ps();
+        _mm512_storeu_ps(y_buf + i * N + j, zero_vec);
+      }
+#endif
+      for (; j < N; ++j) {
+        y_buf[i * N + j] = 0;
+      }
+    }
+  }
+}
+
+template <int N, typename out_dtype>
+inline void store_out(const float* y_buf, out_dtype* c_ptr, int64_t m,
+                      int64_t lda) {
+  for (int i = 0; i < m; ++i) {
+    int j = 0;
+    if constexpr (std::is_same<out_dtype, float>::value) {
+#if defined(CPU_CAPABILITY_AVX512)
+  #pragma GCC unroll 2
+      for (; j < N; j += 16) {
+        __m512 y_vec = _mm512_loadu_ps(y_buf + i * N + j);
+        _mm512_storeu_ps(c_ptr + i * lda + j, y_vec);
+      }
+#endif
+      for (; j < N; ++j) {
+        c_ptr[i * lda + j] = y_buf[i * N + j];
+      }
+    } else if constexpr (std::is_same<out_dtype, at::BFloat16>::value) {
+#if defined(CPU_CAPABILITY_AVX512)
+  #pragma GCC unroll 2
+      for (; j < N; j += 16) {
+        __m512 y_vec = _mm512_loadu_ps(y_buf + i * N + j);
+        __m256i y_bf16_vec = at::vec::cvtfp32_bf16(y_vec);
+        _mm256_storeu_si256(reinterpret_cast<__m256i*>(c_ptr + i * lda + j),
+                            y_bf16_vec);
+      }
+#endif
+      for (; j < N; ++j) {
+        c_ptr[i * lda + j] = at::BFloat16(y_buf[i * N + j]);
+      }
+    } else if constexpr (std::is_same<out_dtype, at::Half>::value) {
+#if defined(CPU_CAPABILITY_AVX512)
+  #pragma GCC unroll 2
+      for (; j < N; j += 16) {
+        __m512 y_vec = _mm512_loadu_ps(y_buf + i * N + j);
+        __m256i y_fp16_vec = at::vec::cvtfp32_fp16(y_vec);
+        _mm256_storeu_si256(reinterpret_cast<__m256i*>(c_ptr + i * lda + j),
+                            y_fp16_vec);
+      }
+#endif
+      for (; j < N; ++j) {
+        c_ptr[i * lda + j] = at::Half(y_buf[i * N + j]);
+      }
+    } else {
+      TORCH_CHECK(false, "Unsupported output dtype");
+    }
+  }
+}
+
+void fill_val_stub(int32_t* __restrict__ output, int32_t value, int64_t size) {
+  using iVec = at::vec::Vectorized<int32_t>;
+  constexpr int VecSize = iVec::size();
+  const iVec fill_val_vec = iVec(value);
+  int64_t d;
+#pragma GCC unroll 4
+  for (d = 0; d <= size - VecSize; d += VecSize) {
+    fill_val_vec.store(output + d);
+  }
+  for (; d < size; ++d) {
+    output[d] = value;
+  }
+}
+
+template <bool sym_quant_act, typename act_dtype, typename out_dtype>
+void _da8w4_linear_impl(
+    act_dtype* __restrict__ input, const float* __restrict__ input_scales,
+    const int32_t* __restrict__ input_qzeros,
+    const uint8_t* __restrict__ weight, const float* __restrict__ weight_scales,
+    const int8_t* __restrict__ weight_qzeros, const float* __restrict__ bias,
+    out_dtype* __restrict__ output, float* __restrict__ output_temp,
+    int8_t* __restrict__ dequant_weight_temp, int64_t M, int64_t N, int64_t K,
+    int64_t num_groups) {
+  const bool use_brgemm = can_use_brgemm<act_dtype>(M);
+  int64_t block_m = [&]() -> long {
+    if (M <= 48) {
+      return M;
+    } else if (M < 64) {
+      return 32;
+    } else if (M < 96) {
+      return 64;
+    } else {
+      return 128;
+    }
+  }();
+  int64_t Mc = div_up(M, block_m);
+  bool parallel_on_M = M > 128;
+  int64_t Nc = N / BLOCK_N;
+  int64_t num_blocks = parallel_on_M ? Mc * Nc : Nc;
+  int64_t group_size = div_up(K, num_groups);
+  int64_t _block_k = get_4bit_block_k_size(group_size);
+  int64_t Kc = K / _block_k;
+  int64_t block_per_group = group_size / _block_k;
+
+  at::parallel_for(0, num_blocks, 1, [&](int64_t begin, int64_t end) {
+    int tid = get_thread_num();
+    float* C_tmp = output_temp + tid * block_m * BLOCK_N;
+    int8_t* dqB_tmp = dequant_weight_temp + tid * _block_k * BLOCK_N;
+    for (const auto i : c10::irange(begin, end)) {
+      int64_t mc = parallel_on_M ? i / Nc : 0;
+      int64_t nc = parallel_on_M ? i % Nc : i;
+      int64_t mc_end = parallel_on_M ? mc + 1 : Mc;
+
+      for (int mci = mc; mci < mc_end; ++mci) {
+        int64_t m_size =
+            mci * block_m + block_m > M ? M - mci * block_m : block_m;
+        auto bias_data = bias ? bias + nc * BLOCK_N : nullptr;
+        copy_bias<BLOCK_N>(bias_data, C_tmp, m_size);
+        for (int kci = 0; kci < Kc; ++kci) {
+          int32_t* compensation_ptr =
+              sym_quant_act
+                  ? nullptr
+                  : (int32_t*)(void*)(weight +
+                                      (nc * Kc + kci) *
+                                          (BLOCK_N *
+                                           (_block_k / 2 + sizeof(int32_t))) +
+                                      _block_k * BLOCK_N / 2);
+          _dequant_gemm_accum<sym_quant_act, BLOCK_N, BLOCK_N / 2>(
+              /*C*/ C_tmp,
+              /*A*/ (uint8_t*)input + mci * block_m * K + kci * _block_k,
+              /*scales_a*/ input_scales + mci * block_m,
+              /*qzeros_a*/ input_qzeros + mci * block_m,
+              /*B*/ weight + (nc * Kc + kci) *
+                                 (BLOCK_N * (_block_k / 2 + sizeof(int32_t))),
+              /*scales_b*/ weight_scales + nc * BLOCK_N * num_groups +
+                  kci / block_per_group * BLOCK_N,
+              /*qzeros_b*/ weight_qzeros + nc * BLOCK_N * num_groups +
+                  kci / block_per_group * BLOCK_N,
+              /*Bcomp*/ compensation_ptr,
+              /*dqB_tmp*/ dqB_tmp,
+              /*M*/ m_size,
+              /*K*/ _block_k,
+              /*lda*/ K,
+              /*ldc*/ BLOCK_N,
+              /*use_brgemm*/ use_brgemm);
+        }
+        store_out<BLOCK_N>(C_tmp, output + mci * block_m * N + nc * BLOCK_N,
+                           m_size, N /*lda*/);
+      }
+    }
+    if (use_brgemm) {
+      at::native::cpublas::brgemm_release();
+    }
+  });
+}
+
+}  // anonymous namespace
+
+std::tuple<at::Tensor, at::Tensor, at::Tensor>
+convert_int4_weight_packed_with_compensation(const at::Tensor& weight,
+                                             const at::Tensor& scales,
+                                             const at::Tensor& qzeros) {
+  TORCH_CHECK(weight.dim() == 2,
+              "DA8W4 CPU: Weight should be a 2D tensor for packing");
+  TORCH_CHECK(
+      weight.size(1) % 2 == 0,
+      "DA8W4 CPU: Weight should have even number of columns for packing");
+
+  auto new_scales = scales;
+  auto new_qzeros = qzeros;
+  if (new_scales.dim() == 1) {
+    new_scales.unsqueeze_(1);
+  }
+  new_scales = new_scales.to(at::kFloat);
+  if (new_qzeros.dim() == 1) {
+    new_qzeros.unsqueeze_(1);
+  }
+  new_qzeros = new_qzeros.to(at::kChar);
+  int64_t N = weight.size(0);
+  int64_t K = weight.size(1);
+  int64_t G = scales.size(1);
+  int64_t group_size = K / G;
+  int64_t _block_k = get_4bit_block_k_size(group_size);
+  constexpr int block_n = block_size_n();
+  int64_t Nc = N / block_n;
+  int64_t Kc = K / _block_k;
+
+  auto weight_view = weight.view({Nc, block_n, Kc, _block_k});
+  at::Tensor weight_reordered = weight_view.permute({0, 2, 3, 1}).contiguous();
+  at::Tensor blocked_weight;
+  at::Tensor blocked_scales =
+      new_scales.view({Nc, block_n, G}).permute({0, 2, 1}).contiguous();
+  at::Tensor blocked_qzeros =
+      new_qzeros.view({Nc, block_n, G}).permute({0, 2, 1}).contiguous();
+  auto weight_sub_qzero = weight.view({Nc, block_n, G, -1}).to(at::kInt) -
+                          new_qzeros.view({Nc, block_n, G, -1});
+  weight_sub_qzero = weight_sub_qzero.view({Nc, block_n, Kc, _block_k});
+  at::Tensor compensation = weight_sub_qzero.sum(-1);
+  compensation = compensation.permute({0, 2, 1}).contiguous().to(at::kInt);
+  int64_t buffer_size_nbytes =
+      _block_k * block_n / 2 + block_n * sizeof(int32_t);
+  blocked_weight = at::empty({Nc, Kc, buffer_size_nbytes}, weight.options());
+
+  auto weight_ptr = weight_reordered.data_ptr<uint8_t>();
+  auto compensation_ptr = compensation.data_ptr<int32_t>();
+  auto blocked_weight_ptr = blocked_weight.data_ptr<uint8_t>();
+  int64_t num_blocks = Nc * Kc;
+  at::parallel_for(0, num_blocks, 1, [&](int64_t begin, int64_t end) {
+    for (const auto i : c10::irange(begin, end)) {
+      auto in_ptr = weight_ptr + i * _block_k * block_n;
+      auto out_ptr =
+          blocked_weight_ptr + i * block_n * (_block_k / 2 + sizeof(int32_t));
+      int32_t* comp_in_prt = compensation_ptr + i * block_n;
+      int32_t* comp_out_prt =
+          (int32_t*)(void*)(blocked_weight_ptr +
+                            i * block_n * (_block_k / 2 + sizeof(int32_t)) +
+                            _block_k * block_n / 2);
+      constexpr int n_group_size = 8;
+      constexpr int vnni_size = 4;
+      constexpr int n_group = block_n / n_group_size;
+      for (int nb = 0; nb < n_group; nb += 2) {
+        for (int k = 0; k < _block_k; k += vnni_size) {
+          for (int ni = 0; ni < n_group_size; ++ni) {
+            for (int ki = 0; ki < vnni_size; ++ki) {
+              int src_idx_1 = nb * n_group_size + ni + (k + ki) * block_n;
+              int src_idx_2 = (nb + 1) * n_group_size + ni + (k + ki) * block_n;
+              int dst_idx = (nb / 2 * n_group_size + ni) * vnni_size +
+                            k * block_n / 2 + ki;
+              uint8_t src_1 = *(in_ptr + src_idx_1);
+              uint8_t src_2 = *(in_ptr + src_idx_2);
+              uint8_t dst = (src_1 & 0x0f) | ((src_2 & 0x0f) << 4);
+              *(out_ptr + dst_idx) = dst;
+            }
+          }
+        }
+      }
+      for (int nb = 0; nb < block_n; nb++) {
+        *(comp_out_prt + nb) = *(comp_in_prt + nb);
+      }
+    }
+  });
+
+  return std::make_tuple(std::move(blocked_weight), std::move(blocked_scales),
+                         std::move(blocked_qzeros));
+}
+
+std::tuple<at::Tensor, at::Tensor> autoawq_to_int4pack(at::Tensor qweight,
+                                                       at::Tensor qzeros) {
+  auto bitshifts = at::tensor({0, 4, 1, 5, 2, 6, 3, 7}, at::kInt) * 4;
+  auto qweight_unsq = qweight.unsqueeze(-1);
+  auto unpacked = at::bitwise_right_shift(qweight_unsq, bitshifts) & 0xF;
+  auto qweight_final = unpacked.flatten(-2).transpose(-1, -2).to(at::kByte);
+
+  auto qzeros_unsq = qzeros.unsqueeze(-1);
+  auto qzeros_unpacked = at::bitwise_right_shift(qzeros_unsq, bitshifts) & 0xF;
+  auto qzeros_final = qzeros_unpacked.flatten(-2).to(at::kByte);
+
+  return std::make_tuple(qweight_final, qzeros_final);
+}
+
+std::tuple<at::Tensor, at::Tensor, at::Tensor> convert_weight_packed_scale_zp(
+    at::Tensor qweight, at::Tensor qzeros, at::Tensor scales) {
+  auto res = autoawq_to_int4pack(qweight, qzeros);
+  auto _qweight = std::get<0>(res);
+  auto _qzeros = std::get<1>(res);
+  auto _scales = scales;
+  _qzeros = _qzeros.transpose(-2, -1).contiguous();
+  _scales = _scales.transpose(-2, -1).contiguous();
+  if (_qweight.dim() == 3) {
+    int64_t E = _qweight.size(0);
+    int64_t K = _qweight.size(2);
+    int64_t G = _scales.size(2);
+    int64_t group_size = K / G;
+    int64_t _block_k = get_4bit_block_k_size(group_size);
+    int64_t block_n = block_size_n();
+    int64_t Nc = _qweight.size(1) / block_n;
+    int64_t Kc = K / _block_k;
+    int64_t buffer_size_nbytes =
+        _block_k * block_n / 2 + block_n * sizeof(int32_t);
+    auto blocked_weight =
+        at::empty({E, Nc, Kc, buffer_size_nbytes}, _qweight.options());
+    auto blocked_scales =
+        at::empty({E, Nc, G, block_n}, _scales.options()).to(at::kFloat);
+    auto blocked_qzeros =
+        at::empty({E, Nc, G, block_n}, _qzeros.options()).to(at::kChar);
+    for (int i = 0; i < _qweight.size(0); i++) {
+      auto res_ = convert_int4_weight_packed_with_compensation(
+          _qweight[i], _scales[i], _qzeros[i]);
+      blocked_weight[i] = std::get<0>(res_);
+      blocked_scales[i] = std::get<1>(res_);
+      blocked_qzeros[i] = std::get<2>(res_);
+    }
+    _qweight = blocked_weight;
+    _scales = blocked_scales;
+    _qzeros = blocked_qzeros;
+  } else {
+    auto res_ = convert_int4_weight_packed_with_compensation(_qweight, _scales,
+                                                             _qzeros);
+    _qweight = std::get<0>(res_);
+    _scales = std::get<1>(res_);
+    _qzeros = std::get<2>(res_);
+  }
+
+  return std::make_tuple(_qweight, _qzeros, _scales);
+}
+
+at::Tensor int4_scaled_mm_cpu_with_quant(const at::Tensor& input,
+                                         const at::Tensor& weight,
+                                         const at::Tensor& weight_scales,
+                                         const at::Tensor& weight_qzeros,
+                                         const std::optional<at::Tensor>& bias,
+                                         at::ScalarType output_dtype) {
+  RECORD_FUNCTION("vllm::int4_scaled_mm_cpu_with_quant",
+                  std::vector<c10::IValue>({input, weight}));
+
+  int64_t M_a = input.size(0);
+  int64_t K_a = input.size(1);
+  int64_t lda = input.stride(0);
+
+  const auto st = input.scalar_type();
+  TORCH_CHECK(
+      st == at::kBFloat16 || st == at::kHalf,
+      "int4_scaled_mm_cpu_with_quant: expect A to be bfloat16 or half.");
+
+  constexpr bool sym_quant_act = false;
+  using Tin = typename ActDtype<sym_quant_act>::type;
+  int64_t act_buffer_size =
+      M_a * K_a + M_a * sizeof(float) + M_a * sizeof(int32_t);
+  auto act_buffer =
+      at::empty({act_buffer_size}, input.options().dtype(at::kByte));
+  auto Aq_data = act_buffer.data_ptr<uint8_t>();
+  auto As_data = reinterpret_cast<float*>(Aq_data + M_a * K_a);
+  auto Azp_data = reinterpret_cast<int32_t*>(As_data + M_a);
+  fill_val_stub(Azp_data, 128, M_a);
+
+  auto out_sizes = input.sizes().vec();
+  int64_t N = weight_scales.size(0) * weight_scales.size(-1);
+  out_sizes.back() = N;
+  auto output = at::empty(out_sizes, input.options());
+  int64_t Nc = weight.size(0);
+  int64_t Kc = weight.size(1);
+  int64_t _block_k = K_a / Kc;
+  TORCH_CHECK(N == Nc * BLOCK_N, "DA8W4: weight and input shapes mismatch");
+  int64_t num_groups = weight_scales.size(1);
+
+  const uint8_t* b_ptr = weight.data_ptr<uint8_t>();
+  const float* b_scales_ptr = weight_scales.data_ptr<float>();
+  const int8_t* b_qzeros_ptr = weight_qzeros.data_ptr<int8_t>();
+  const float* bias_ptr =
+      bias.has_value() ? bias.value().data_ptr<float>() : nullptr;
+  int num_threads = at::get_num_threads();
+  int64_t temp_buffer_size = num_threads * BLOCK_M * BLOCK_N * sizeof(float) +
+                             num_threads * _block_k * BLOCK_N;
+  auto c_temp_buffer =
+      at::empty({temp_buffer_size}, input.options().dtype(at::kChar));
+  float* c_temp_ptr = (float*)((void*)(c_temp_buffer.data_ptr<int8_t>()));
+  int8_t* dqB_temp_ptr =
+      (int8_t*)((void*)(c_temp_ptr + num_threads * BLOCK_M * BLOCK_N));
+
+#define LAUNCH_DA8W4_LINEAR_WITH_QUANT_IMPL(sym_quant_act)                 \
+  AT_DISPATCH_FLOATING_TYPES_AND2(                                         \
+      at::ScalarType::BFloat16, at::ScalarType::Half, output_dtype,        \
+      "int4_scaled_mm_cpu", [&] {                                          \
+        const scalar_t* __restrict__ A_data = input.data_ptr<scalar_t>();  \
+        scalar_t* __restrict__ c_ptr = output.data_ptr<scalar_t>();        \
+        at::parallel_for(0, M_a, 0, [&](int64_t begin, int64_t end) {      \
+          for (int64_t m = begin; m < end; ++m) {                          \
+            quantize_row_int8<scalar_t>(Aq_data + m * K_a, As_data[m],     \
+                                        A_data + m * lda, K_a);            \
+          }                                                                \
+        });                                                                \
+        _da8w4_linear_impl<sym_quant_act, Tin, scalar_t>(                  \
+            Aq_data, As_data, Azp_data, b_ptr, b_scales_ptr, b_qzeros_ptr, \
+            bias_ptr, c_ptr, c_temp_ptr, dqB_temp_ptr, M_a, N, K_a,        \
+            num_groups);                                                   \
+      });
+
+  LAUNCH_DA8W4_LINEAR_WITH_QUANT_IMPL(sym_quant_act);
+
+  return output;
+}
+
+namespace {
+
+template <typename scalar_t>
+inline void copy_stub(scalar_t* __restrict__ out,
+                      const float* __restrict__ input, int64_t size) {
+  using Vec = at::vec::Vectorized<scalar_t>;
+  using fVec = at::vec::Vectorized<float>;
+#pragma GCC unroll 4
+  for (int64_t d = 0; d < size; d += Vec::size()) {
+    fVec x0 = fVec::loadu(input + d);
+    fVec x1 = fVec::loadu(input + d + fVec::size());
+    Vec res = convert_from_float_ext<scalar_t>(x0, x1);
+    res.store(out + d);
+  }
+}
+
+}  // anonymous namespace
+
+template <typename scalar_t>
+void tinygemm_kernel(scalar_t* C, float* C_temp, const uint8_t* A,
+                     const float* scales_a, const int32_t* qzeros_a,
+                     const uint8_t* B, const float* scales_b,
+                     const int8_t* qzeros_b, const int32_t* compensation,
+                     int8_t* dqB_tmp, int64_t M, int64_t K, int64_t lda,
+                     int64_t ldc_f, int64_t ldc_s, bool store_out,
+                     bool use_brgemm) {
+  _dequant_gemm_accum<false, BLOCK_N, BLOCK_N / 2>(
+      C_temp, A, scales_a, qzeros_a, B, scales_b, qzeros_b, compensation,
+      dqB_tmp, M, K, lda, ldc_f, use_brgemm);
+  if (store_out) {
+    for (int64_t m = 0; m < M; ++m) {
+      copy_stub<scalar_t>(C + m * ldc_s, C_temp + m * ldc_f, BLOCK_N);
+    }
+  }
+}
+
+#define INSTANTIATE_TINYGEMM_TEMPLATE(TYPE)                                 \
+  template void tinygemm_kernel<TYPE>(                                      \
+      TYPE * C, float* C_temp, const uint8_t* A, const float* scales_a,     \
+      const int32_t* qzeros_a, const uint8_t* B, const float* scales_b,     \
+      const int8_t* qzeros_b, const int32_t* compensation, int8_t* dqB_tmp, \
+      int64_t M, int64_t K, int64_t lda, int64_t ldc_f, int64_t ldc_s,      \
+      bool store_out, bool use_brgemm)
+
+INSTANTIATE_TINYGEMM_TEMPLATE(at::BFloat16);
+INSTANTIATE_TINYGEMM_TEMPLATE(at::Half);
+
+at::Tensor int4_scaled_mm_cpu(at::Tensor& x, at::Tensor& w, at::Tensor& w_zeros,
+                              at::Tensor& w_scales,
+                              std::optional<at::Tensor> bias) {
+  return int4_scaled_mm_cpu_with_quant(x, w, w_scales, w_zeros, bias,
+                                       x.scalar_type());
+}

csrc/cpu/torch_bindings.cpp

@@ -79,6 +79,14 @@ at::Tensor int8_scaled_mm_with_quant(at::Tensor& mat1, at::Tensor& mat2,
                                      const std::optional<at::Tensor>& bias,
                                      at::ScalarType out_dtype, bool is_vnni);
 
+// Adapted from sglang: INT4 W4A8 kernels
+std::tuple<at::Tensor, at::Tensor, at::Tensor> convert_weight_packed_scale_zp(
+    at::Tensor qweight, at::Tensor qzeros, at::Tensor scales);
+
+at::Tensor int4_scaled_mm_cpu(at::Tensor& x, at::Tensor& w, at::Tensor& w_zeros,
+                              at::Tensor& w_scales,
+                              std::optional<at::Tensor> bias);
+
 torch::Tensor get_scheduler_metadata(
     const int64_t num_req, const int64_t num_heads_q,
     const int64_t num_heads_kv, const int64_t head_dim,
@@ -285,6 +293,18 @@ TORCH_LIBRARY_EXPAND(TORCH_EXTENSION_NAME, ops) {
       "Tensor? bias, ScalarType out_dtype, bool is_vnni) -> Tensor");
   ops.impl("int8_scaled_mm_with_quant", torch::kCPU,
            &int8_scaled_mm_with_quant);
+
+  // Adapted from sglang: INT4 W4A8 kernels
+  ops.def(
+      "convert_weight_packed_scale_zp(Tensor qweight, Tensor qzeros, "
+      "Tensor scales) -> (Tensor, Tensor, Tensor)");
+  ops.impl("convert_weight_packed_scale_zp", torch::kCPU,
+           &convert_weight_packed_scale_zp);
+
+  ops.def(
+      "int4_scaled_mm_cpu(Tensor(a0!) x, Tensor(a1!) w, Tensor(a2!) w_zeros, "
+      "Tensor(a3!) w_scales, Tensor? bias) -> Tensor");
+  ops.impl("int4_scaled_mm_cpu", torch::kCPU, &int4_scaled_mm_cpu);
 #endif
 
   // CPU attention kernels

csrc/cuda_vec_utils.cuh

@@ -3,8 +3,8 @@
 
 #pragma once
 
-#include <c10/util/BFloat16.h>
-#include <c10/util/Half.h>
+#include <torch/headeronly/util/BFloat16.h>
+#include <torch/headeronly/util/Half.h>
 #include <cassert>
 
 #ifdef USE_ROCM

csrc/cutlass_extensions/common.hpp

@@ -6,14 +6,16 @@
 #include <cstdio>
 #include <cstdlib>
 
+#include <torch/headeronly/util/shim_utils.h>
+
 /**
  * Helper function for checking CUTLASS errors
  */
-#define CUTLASS_CHECK(status)                       \
-  {                                                 \
-    cutlass::Status error = status;                 \
-    TORCH_CHECK(error == cutlass::Status::kSuccess, \
-                cutlassGetStatusString(error));     \
+#define CUTLASS_CHECK(status)                           \
+  {                                                     \
+    cutlass::Status error = status;                     \
+    STD_TORCH_CHECK(error == cutlass::Status::kSuccess, \
+                    cutlassGetStatusString(error));     \
   }
 
 inline int get_cuda_max_shared_memory_per_block_opt_in(int const device) {

csrc/cutlass_extensions/cute_utils.cuh

@@ -1,7 +1,6 @@
 #pragma once
 
 #include <cute/tensor.hpp>
-#include <torch/all.h>
 namespace cute {
 
 ////////////////////////////////////////////////////////////////////

csrc/cutlass_extensions/epilogue/broadcast_load_epilogue_array_c3x.hpp

@@ -189,9 +189,9 @@ struct Sm90RowOrScalarBroadcastArray {
       }
 
       auto synchronize = [&] () { cutlass::arch::NamedBarrier::sync(thr_num, cutlass::arch::ReservedNamedBarriers::EpilogueBarrier); };
-      Tensor tGS_gRow_flt = filter_zeros(tGS_gRow);
-      Tensor tGS_sRow_flt = filter_zeros(tGS_sRow);
-      Tensor tGS_cRow_flt = make_tensor(tGS_cRow.data(), make_layout(tGS_gRow_flt.shape(), tGS_cRow.stride()));
+      cute::Tensor tGS_gRow_flt = filter_zeros(tGS_gRow);
+      cute::Tensor tGS_sRow_flt = filter_zeros(tGS_sRow);
+      cute::Tensor tGS_cRow_flt = make_tensor(tGS_cRow.data(), make_layout(tGS_gRow_flt.shape(), tGS_cRow.stride()));
 
       for (int i = 0; i < size(tGS_gRow_flt); ++i) {
         if (get<1>(tGS_cRow_flt(i)) >= size<1>(CtaTileShapeMNK{})) {
@@ -211,8 +211,8 @@ struct Sm90RowOrScalarBroadcastArray {
     begin_loop(int epi_m, int epi_n) {
       if (epi_m == 0) { // Assumes M-major subtile loop
         if (!params.row_broadcast) return; // Do not issue LDS when row is scalar 
-        Tensor tSR_sRow_flt = filter_zeros(tSR_sRow(_,_,_,epi_m,epi_n));
-        Tensor tSR_rRow_flt = filter_zeros(tSR_rRow);
+        cute::Tensor tSR_sRow_flt = filter_zeros(tSR_sRow(_,_,_,epi_m,epi_n));
+        cute::Tensor tSR_rRow_flt = filter_zeros(tSR_rRow);
         copy(tSR_sRow_flt, tSR_rRow_flt);
       }
     }
@@ -241,9 +241,9 @@ struct Sm90RowOrScalarBroadcastArray {
     auto [m, n, k, l] = args.tile_coord_mnkl;
     using ThreadCount = decltype(size(args.tiled_copy));
 
-    Tensor mRow = make_tensor(make_gmem_ptr(params.ptr_row_array[l]), make_shape(M,N,1), params.dRow);
-    Tensor gRow = local_tile(mRow(_,_,l), take<0,2>(args.tile_shape_mnk), make_coord(m, n));          // (CTA_M, CTA_N)
-    Tensor sRow = make_tensor(make_smem_ptr(smem), 
+    cute::Tensor mRow = make_tensor(make_gmem_ptr(params.ptr_row_array[l]), make_shape(M,N,1), params.dRow);
+    cute::Tensor gRow = local_tile(mRow(_,_,l), take<0,2>(args.tile_shape_mnk), make_coord(m, n));          // (CTA_M, CTA_N)
+    cute::Tensor sRow = make_tensor(make_smem_ptr(smem), 
         make_shape(size<0>(CtaTileShapeMNK{}), size<1>(CtaTileShapeMNK{})), make_shape(_0{}, _1{}));  // (CTA_M, CTA_N)
     //// G2S: Gmem to Smem
     auto tiled_g2s = make_tiled_copy(Copy_Atom<DefaultCopy, Element>{},
@@ -251,16 +251,16 @@ struct Sm90RowOrScalarBroadcastArray {
                                             Stride<_0,          _1>>{}, 
                                      Layout<_1>{});   
     auto thr_g2s = tiled_g2s.get_slice(args.thread_idx);
-    Tensor tGS_gRow = thr_g2s.partition_S(gRow);
-    Tensor tGS_sRow = thr_g2s.partition_D(sRow);
+    cute::Tensor tGS_gRow = thr_g2s.partition_S(gRow);
+    cute::Tensor tGS_sRow = thr_g2s.partition_D(sRow);
 
     //// G2S: Coord 
     auto cRow = make_identity_tensor(make_shape(size<0>(CtaTileShapeMNK{}), size<1>(CtaTileShapeMNK{})));
-    Tensor tGS_cRow = thr_g2s.partition_S(cRow);
+    cute::Tensor tGS_cRow = thr_g2s.partition_S(cRow);
 
     //// S2R: Smem to Reg
-    Tensor tSR_sRow = sm90_partition_for_epilogue<ReferenceSrc>(sRow, args.epi_tile, args.tiled_copy, args.thread_idx);
-    Tensor tSR_rRow = make_tensor_like(take<0,3>(tSR_sRow));                                           // (CPY,CPY_M,CPY_N)
+    cute::Tensor tSR_sRow = sm90_partition_for_epilogue<ReferenceSrc>(sRow, args.epi_tile, args.tiled_copy, args.thread_idx);
+    cute::Tensor tSR_rRow = make_tensor_like(take<0,3>(tSR_sRow));                                           // (CPY,CPY_M,CPY_N)
 
     return ConsumerStoreCallbacks<decltype(tGS_gRow), decltype(tGS_sRow), decltype(tGS_cRow), decltype(tiled_g2s), decltype(tSR_sRow), decltype(tSR_rRow), decltype(args.tCcD), decltype(args.residue_cD), ThreadCount>(
       tGS_gRow, 
@@ -389,7 +389,7 @@ struct Sm90ColOrScalarBroadcastArray {
 
     CUTLASS_DEVICE void
     begin() {
-      Tensor pred = make_tensor<bool>(shape(tCgCol));
+      cute::Tensor pred = make_tensor<bool>(shape(tCgCol));
       CUTLASS_PRAGMA_UNROLL
       for (int i = 0; i < size(pred); ++i) {
         pred(i) = get<0>(tCcCol(i)) < m;
@@ -409,7 +409,7 @@ struct Sm90ColOrScalarBroadcastArray {
     CUTLASS_DEVICE Array<Element, FragmentSize>
     visit(Array<ElementAccumulator, FragmentSize> const& frg_acc, int epi_v, int epi_m, int epi_n) {
       Array<Element, FragmentSize> frg_col;
-      Tensor tCrCol_mn = tCrCol(_,_,_,epi_m,epi_n);
+      cute::Tensor tCrCol_mn = tCrCol(_,_,_,epi_m,epi_n);
 
       CUTLASS_PRAGMA_UNROLL
       for (int i = 0; i < FragmentSize; ++i) {
@@ -431,16 +431,16 @@ struct Sm90ColOrScalarBroadcastArray {
     auto [M, N, K, L] = args.problem_shape_mnkl;
     auto [m, n, k, l] = args.tile_coord_mnkl;
 
-    Tensor mCol = make_tensor(make_gmem_ptr(params.ptr_col_array[l]), make_shape(M,N,1), params.dCol);
-    Tensor tCgCol = sm90_partition_for_epilogue<ReferenceSrc>(                         // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
+    cute::Tensor mCol = make_tensor(make_gmem_ptr(params.ptr_col_array[l]), make_shape(M,N,1), params.dCol);
+    cute::Tensor tCgCol = sm90_partition_for_epilogue<ReferenceSrc>(                         // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
       mCol, args.tile_shape_mnk, args.tile_coord_mnkl, args.epi_tile, args.tiled_copy, args.thread_idx);
-    Tensor tCrCol = make_tensor_like(tCgCol);                                          // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
+    cute::Tensor tCrCol = make_tensor_like(tCgCol);                                          // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
 
     // Generate an identity tensor matching the shape of the global tensor and 
     //  partition the same way, this will be used to generate the predicate
     //  tensor for loading
-    Tensor cCol = make_identity_tensor(mCol.shape());
-    Tensor tCcCol = sm90_partition_for_epilogue<ReferenceSrc>(                         // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
+    cute::Tensor cCol = make_identity_tensor(mCol.shape());
+    cute::Tensor tCcCol = sm90_partition_for_epilogue<ReferenceSrc>(                         // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
       cCol, args.tile_shape_mnk, args.tile_coord_mnkl, args.epi_tile, args.tiled_copy, args.thread_idx);
 
     return ConsumerStoreCallbacks(

csrc/cutlass_extensions/epilogue/broadcast_load_epilogue_c3x.hpp

@@ -186,9 +186,9 @@ struct Sm90RowOrScalarBroadcast {
       }
 
       auto synchronize = [&] () { cutlass::arch::NamedBarrier::sync(thr_num, cutlass::arch::ReservedNamedBarriers::EpilogueBarrier); };
-      Tensor tGS_gRow_flt = filter_zeros(tGS_gRow);
-      Tensor tGS_sRow_flt = filter_zeros(tGS_sRow);
-      Tensor tGS_cRow_flt = make_tensor(tGS_cRow.data(), make_layout(tGS_gRow_flt.shape(), tGS_cRow.stride()));
+      cute::Tensor tGS_gRow_flt = filter_zeros(tGS_gRow);
+      cute::Tensor tGS_sRow_flt = filter_zeros(tGS_sRow);
+      cute::Tensor tGS_cRow_flt = make_tensor(tGS_cRow.data(), make_layout(tGS_gRow_flt.shape(), tGS_cRow.stride()));
 
       for (int i = 0; i < size(tGS_gRow_flt); ++i) {
         if (get<1>(tGS_cRow_flt(i)) >= size<1>(CtaTileShapeMNK{})) {
@@ -208,8 +208,8 @@ struct Sm90RowOrScalarBroadcast {
     begin_loop(int epi_m, int epi_n) {
       if (epi_m == 0) { // Assumes M-major subtile loop
         if (!params.row_broadcast) return; // Do not issue LDS when row is scalar 
-        Tensor tSR_sRow_flt = filter_zeros(tSR_sRow(_,_,_,epi_m,epi_n));
-        Tensor tSR_rRow_flt = filter_zeros(tSR_rRow);
+        cute::Tensor tSR_sRow_flt = filter_zeros(tSR_sRow(_,_,_,epi_m,epi_n));
+        cute::Tensor tSR_rRow_flt = filter_zeros(tSR_rRow);
         copy(tSR_sRow_flt, tSR_rRow_flt);
       }
     }
@@ -238,9 +238,9 @@ struct Sm90RowOrScalarBroadcast {
     auto [m, n, k, l] = args.tile_coord_mnkl;
     using ThreadCount = decltype(size(args.tiled_copy));
 
-    Tensor mRow = make_tensor(make_gmem_ptr(params.ptr_row), make_shape(M,N,L), params.dRow);
-    Tensor gRow = local_tile(mRow(_,_,l), take<0,2>(args.tile_shape_mnk), make_coord(m, n));          // (CTA_M, CTA_N)
-    Tensor sRow = make_tensor(make_smem_ptr(smem), 
+    cute::Tensor mRow = make_tensor(make_gmem_ptr(params.ptr_row), make_shape(M,N,L), params.dRow);
+    cute::Tensor gRow = local_tile(mRow(_,_,l), take<0,2>(args.tile_shape_mnk), make_coord(m, n));          // (CTA_M, CTA_N)
+    cute::Tensor sRow = make_tensor(make_smem_ptr(smem), 
         make_shape(size<0>(CtaTileShapeMNK{}), size<1>(CtaTileShapeMNK{})), make_shape(_0{}, _1{}));  // (CTA_M, CTA_N)
     //// G2S: Gmem to Smem
     auto tiled_g2s = make_tiled_copy(Copy_Atom<DefaultCopy, Element>{},
@@ -248,16 +248,16 @@ struct Sm90RowOrScalarBroadcast {
                                             Stride<_0,          _1>>{}, 
                                      Layout<_1>{});   
     auto thr_g2s = tiled_g2s.get_slice(args.thread_idx);
-    Tensor tGS_gRow = thr_g2s.partition_S(gRow);
-    Tensor tGS_sRow = thr_g2s.partition_D(sRow);
+    cute::Tensor tGS_gRow = thr_g2s.partition_S(gRow);
+    cute::Tensor tGS_sRow = thr_g2s.partition_D(sRow);
 
     //// G2S: Coord 
     auto cRow = make_identity_tensor(make_shape(size<0>(CtaTileShapeMNK{}), size<1>(CtaTileShapeMNK{})));
-    Tensor tGS_cRow = thr_g2s.partition_S(cRow);
+    cute::Tensor tGS_cRow = thr_g2s.partition_S(cRow);
 
     //// S2R: Smem to Reg
-    Tensor tSR_sRow = sm90_partition_for_epilogue<ReferenceSrc>(sRow, args.epi_tile, args.tiled_copy, args.thread_idx);
-    Tensor tSR_rRow = make_tensor_like(take<0,3>(tSR_sRow));                                           // (CPY,CPY_M,CPY_N)
+    cute::Tensor tSR_sRow = sm90_partition_for_epilogue<ReferenceSrc>(sRow, args.epi_tile, args.tiled_copy, args.thread_idx);
+    cute::Tensor tSR_rRow = make_tensor_like(take<0,3>(tSR_sRow));                                           // (CPY,CPY_M,CPY_N)
 
     return ConsumerStoreCallbacks<decltype(tGS_gRow), decltype(tGS_sRow), decltype(tGS_cRow), decltype(tiled_g2s), decltype(tSR_sRow), decltype(tSR_rRow), decltype(args.tCcD), decltype(args.residue_cD), ThreadCount>(
       tGS_gRow, 
@@ -382,7 +382,7 @@ struct Sm90ColOrScalarBroadcast {
 
     CUTLASS_DEVICE void
     begin() {
-      Tensor pred = make_tensor<bool>(shape(tCgCol));
+      cute::Tensor pred = make_tensor<bool>(shape(tCgCol));
       CUTLASS_PRAGMA_UNROLL
       for (int i = 0; i < size(pred); ++i) {
         pred(i) = get<0>(tCcCol(i)) < m;
@@ -402,7 +402,7 @@ struct Sm90ColOrScalarBroadcast {
     CUTLASS_DEVICE Array<Element, FragmentSize>
     visit(Array<ElementAccumulator, FragmentSize> const& frg_acc, int epi_v, int epi_m, int epi_n) {
       Array<Element, FragmentSize> frg_col;
-      Tensor tCrCol_mn = tCrCol(_,_,_,epi_m,epi_n);
+      cute::Tensor tCrCol_mn = tCrCol(_,_,_,epi_m,epi_n);
 
       CUTLASS_PRAGMA_UNROLL
       for (int i = 0; i < FragmentSize; ++i) {
@@ -422,16 +422,16 @@ struct Sm90ColOrScalarBroadcast {
   get_consumer_store_callbacks(ConsumerStoreArgs<Args...> const& args) {
 
     auto [M, N, K, L] = args.problem_shape_mnkl;
-    Tensor mCol = make_tensor(make_gmem_ptr(params.ptr_col), make_shape(M,N,L), params.dCol);
-    Tensor tCgCol = sm90_partition_for_epilogue<ReferenceSrc>(                         // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
+    cute::Tensor mCol = make_tensor(make_gmem_ptr(params.ptr_col), make_shape(M,N,L), params.dCol);
+    cute::Tensor tCgCol = sm90_partition_for_epilogue<ReferenceSrc>(                         // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
       mCol, args.tile_shape_mnk, args.tile_coord_mnkl, args.epi_tile, args.tiled_copy, args.thread_idx);
-    Tensor tCrCol = make_tensor_like(tCgCol);                                          // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
+    cute::Tensor tCrCol = make_tensor_like(tCgCol);                                          // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
 
     // Generate an identity tensor matching the shape of the global tensor and 
     //  partition the same way, this will be used to generate the predicate
     //  tensor for loading
-    Tensor cCol = make_identity_tensor(mCol.shape());
-    Tensor tCcCol = sm90_partition_for_epilogue<ReferenceSrc>(                         // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
+    cute::Tensor cCol = make_identity_tensor(mCol.shape());
+    cute::Tensor tCcCol = sm90_partition_for_epilogue<ReferenceSrc>(                         // (CPY,CPY_M,CPY_N,EPI_M,EPI_N)
       cCol, args.tile_shape_mnk, args.tile_coord_mnkl, args.epi_tile, args.tiled_copy, args.thread_idx);
 
     return ConsumerStoreCallbacks(

csrc/cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp

@@ -3,6 +3,14 @@
 #include "cutlass_extensions/epilogue/broadcast_load_epilogue_c3x.hpp"
 #include "cutlass_extensions/epilogue/broadcast_load_epilogue_array_c3x.hpp"
 
+// This header is shared by both _C (unstable ABI) and _C_stable_libtorch
+// (stable ABI) targets. When compiled under the stable ABI target,
+// TORCH_TARGET_VERSION is defined and Tensor is unavailable, so we
+// use torch::stable::Tensor instead.
+#ifdef TORCH_TARGET_VERSION
+  #include <torch/csrc/stable/tensor.h>
+#endif
+
 /*
    This file defines custom epilogues for fusing channel scales, token scales,
    bias, and activation zero-points onto a GEMM operation using the
@@ -15,6 +23,12 @@
 
 namespace vllm::c3x {
 
+#ifdef TORCH_TARGET_VERSION
+using TensorType = torch::stable::Tensor;
+#else
+using TensorType = torch::Tensor;
+#endif
+
 using namespace cute;
 
 template <typename T>
@@ -84,7 +98,7 @@ struct ScaledEpilogueBase {
   // from a tensor. It can handle both row and column, as well as row/column or
   // scalar cases.
   template <typename Descriptor, typename T>
-  static auto args_from_tensor(torch::Tensor const& tensor) {
+  static auto args_from_tensor(TensorType const& tensor) {
     using Arguments = typename Descriptor::Arguments;
     auto* data_ptr = static_cast<T*>(tensor.data_ptr());
     if constexpr (std::is_same_v<Descriptor, ColOrScalarLoad<T>> ||
@@ -100,7 +114,7 @@ struct ScaledEpilogueBase {
   // This overload handles the case where there might not be a tensor, in which
   // case a nullptr is passed and a constant (0) is used.
   template <typename Descriptor, typename T>
-  static auto args_from_tensor(std::optional<torch::Tensor> const& tensor) {
+  static auto args_from_tensor(std::optional<TensorType> const& tensor) {
     using Arguments = typename Descriptor::Arguments;
     auto* data_ptr = tensor ? static_cast<T*>(tensor->data_ptr()) : nullptr;
     static_assert(std::is_same_v<Descriptor, ColLoad<T, true>> ||
@@ -158,8 +172,8 @@ struct ScaledEpilogue
       cutlass::epilogue::fusion::Sm90EVT<Compute1, ScaleA, EVTCompute0>;
   using ArgumentType = typename EVTCompute::Arguments;
 
-  static ArgumentType prepare_args(torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales) {
+  static ArgumentType prepare_args(TensorType const& a_scales,
+                                   TensorType const& b_scales) {
     auto a_args = SUPER::template args_from_tensor<ScaleA, float>(a_scales);
     auto b_args = SUPER::template args_from_tensor<ScaleB, float>(b_scales);
 
@@ -203,9 +217,9 @@ struct ScaledEpilogueBias
       cutlass::epilogue::fusion::Sm90EVT<Compute1, ScaleA, EVTCompute0, Bias>;
 
   using ArgumentType = typename EVTCompute::Arguments;
-  static ArgumentType prepare_args(torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales,
-                                   torch::Tensor const& bias) {
+  static ArgumentType prepare_args(TensorType const& a_scales,
+                                   TensorType const& b_scales,
+                                   TensorType const& bias) {
     auto a_args = SUPER::template args_from_tensor<ScaleA, float>(a_scales);
     auto b_args = SUPER::template args_from_tensor<ScaleB, float>(b_scales);
     auto bias_args = SUPER::template args_from_tensor<Bias, ElementD>(bias);
@@ -246,9 +260,9 @@ struct ScaledEpilogueColumnBias
       cutlass::epilogue::fusion::Sm90EVT<Compute1, ScaleA, EVTCompute0, Bias>;
 
   using ArgumentType = typename EVTCompute::Arguments;
-  static ArgumentType prepare_args(torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales,
-                                   torch::Tensor const& bias) {
+  static ArgumentType prepare_args(TensorType const& a_scales,
+                                   TensorType const& b_scales,
+                                   TensorType const& bias) {
     auto a_args = SUPER::template args_from_tensor<ScaleA, float>(a_scales);
     auto b_args = SUPER::template args_from_tensor<ScaleB, float>(b_scales);
     auto bias_args = SUPER::template args_from_tensor<Bias, ElementD>(bias);
@@ -304,10 +318,10 @@ struct ScaledEpilogueBiasAzp
                                          EVTComputeScaleB, Bias>;
   using ArgumentType = typename EVTCompute::Arguments;
 
-  static ArgumentType prepare_args(torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales,
-                                   torch::Tensor const& azp_adj,
-                                   std::optional<torch::Tensor> const& bias) {
+  static ArgumentType prepare_args(TensorType const& a_scales,
+                                   TensorType const& b_scales,
+                                   TensorType const& azp_adj,
+                                   std::optional<TensorType> const& bias) {
     auto a_args = SUPER::template args_from_tensor<ScaleA, float>(a_scales);
     auto b_args = SUPER::template args_from_tensor<ScaleB, float>(b_scales);
     auto bias_args = SUPER::template args_from_tensor<Bias, ElementD>(bias);
@@ -380,11 +394,11 @@ struct ScaledEpilogueBiasAzpToken
                                          EVTComputeScaleB, Bias>;
   using ArgumentType = typename EVTCompute::Arguments;
 
-  static ArgumentType prepare_args(torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales,
-                                   torch::Tensor const& azp_adj,
-                                   torch::Tensor const& azp,
-                                   std::optional<torch::Tensor> const& bias) {
+  static ArgumentType prepare_args(TensorType const& a_scales,
+                                   TensorType const& b_scales,
+                                   TensorType const& azp_adj,
+                                   TensorType const& azp,
+                                   std::optional<TensorType> const& bias) {
     auto a_args = SUPER::template args_from_tensor<ScaleA, float>(a_scales);
     auto b_args = SUPER::template args_from_tensor<ScaleB, float>(b_scales);
     auto bias_args = SUPER::template args_from_tensor<Bias, ElementD>(bias);

csrc/cutlass_extensions/torch_utils.hpp

@@ -1,6 +1,21 @@
 #pragma once
 
-#include <torch/all.h>
+// This header is shared between _C (unstable ABI, used by machete) and
+// _C_stable_libtorch (stable ABI, used by W4A8/sparse). TORCH_TARGET_VERSION
+// is defined only for the stable target, so we switch includes and types
+// accordingly. TorchTensor (not Tensor) avoids ambiguity with cute::Tensor.
+#ifdef TORCH_TARGET_VERSION
+  #include <torch/csrc/stable/tensor.h>
+  #include <torch/headeronly/util/BFloat16.h>
+  #include <torch/headeronly/util/Half.h>
+  #include <torch/headeronly/util/shim_utils.h>  // for STD_TORCH_CHECK
+using TorchTensor = torch::stable::Tensor;
+  #define TORCH_UTILS_CHECK STD_TORCH_CHECK
+#else
+  #include <torch/all.h>
+using TorchTensor = torch::Tensor;
+  #define TORCH_UTILS_CHECK TORCH_CHECK
+#endif
 
 #include "cute/layout.hpp"
 #include "cutlass/layout/matrix.h"
@@ -55,35 +70,35 @@ CUTE_HOST_DEVICE constexpr auto make_shape_from_idx(F&& f) {
 // If `tensor.dim() < rank(Stride{})`, the shape is padded with 1s and the extra
 // strides are set to be 0 or 1.
 template <typename Stride>
-static inline auto make_cute_layout(torch::Tensor const& tensor,
+static inline auto make_cute_layout(TorchTensor const& tensor,
                                     std::string_view name = "tensor") {
-  TORCH_CHECK(tensor.dim() <= rank(Stride{}));
-  auto stride = cute::transform_with_idx(
-      Stride{}, [&](auto const& stride_ele, auto const& idx) {
-        using StrideEle = std::decay_t<decltype(stride_ele)>;
+  TORCH_UTILS_CHECK(tensor.dim() <= rank(Stride{}));
+  auto stride = cute::transform_with_idx(Stride{}, [&](auto const& stride_ele,
+                                                       auto const& idx) {
+    using StrideEle = std::decay_t<decltype(stride_ele)>;
 
-        if (idx < tensor.dim()) {
-          if constexpr (cute::is_static_v<StrideEle>) {
-            TORCH_CHECK(StrideEle::value == tensor.stride(idx), "Expected ",
-                        name, ".stride(", idx, ") to be ", StrideEle::value);
-            return StrideEle{};
-          } else {
-            if (tensor.size(idx) == 1) {
-              // use 0 stride for dim with size 1, this is easier for
-              // cute/cutlass to optimize (helps the TMA code flatten dims)
-              return StrideEle{0};
-            } else {
-              return tensor.stride(idx);
-            }
-          }
+    if (idx < tensor.dim()) {
+      if constexpr (cute::is_static_v<StrideEle>) {
+        TORCH_UTILS_CHECK(StrideEle::value == tensor.stride(idx), "Expected ",
+                          name, ".stride(", idx, ") to be ", StrideEle::value);
+        return StrideEle{};
+      } else {
+        if (tensor.size(idx) == 1) {
+          // use 0 stride for dim with size 1, this is easier for
+          // cute/cutlass to optimize (helps the TMA code flatten dims)
+          return StrideEle{0};
         } else {
-          // Extra strides are assumed to be 0 or 1
-          if constexpr (cute::is_static_v<StrideEle>) {
-            static_assert(StrideEle::value == 0 || StrideEle::value == 1);
-          }
-          return StrideEle{};
+          return tensor.stride(idx);
         }
-      });
+      }
+    } else {
+      // Extra strides are assumed to be 0 or 1
+      if constexpr (cute::is_static_v<StrideEle>) {
+        static_assert(StrideEle::value == 0 || StrideEle::value == 1);
+      }
+      return StrideEle{};
+    }
+  });
 
   auto shape = cute::make_shape_from_idx<rank(Stride{})>([&](auto const& idx) {
     if (idx < tensor.dim())
@@ -97,7 +112,7 @@ static inline auto make_cute_layout(torch::Tensor const& tensor,
 
 template <typename Stride>
 static inline auto maybe_make_cute_layout(
-    std::optional<torch::Tensor> const& tensor,
+    std::optional<TorchTensor> const& tensor,
     std::string_view name = "tensor") {
   using Layout = decltype(make_cute_layout<Stride>(*tensor));
 
@@ -121,12 +136,12 @@ template <typename T>
 using equivalent_cutlass_type_t = typename equivalent_cutlass_type<T>::type;
 
 template <>
-struct equivalent_cutlass_type<c10::Half> {
+struct equivalent_cutlass_type<torch::headeronly::Half> {
   using type = cutlass::half_t;
 };
 
 template <>
-struct equivalent_cutlass_type<c10::BFloat16> {
+struct equivalent_cutlass_type<torch::headeronly::BFloat16> {
   using type = cutlass::bfloat16_t;
 };
 
@@ -134,8 +149,8 @@ struct equivalent_cutlass_type<c10::BFloat16> {
 // equivalent_scalar_t (basically inverse of equivalent_cutlass_type)
 //
 
-// Return a `c10::CppTypeToScalarType<T>` compatible type, i.e. get the C++ from
-// c10 that is equivalent to T, e.g.: `cutlass::half_t -> c10::Half`
+// Return a `torch::headeronly::CppTypeToScalarType<T>` compatible type, i.e.
+// get the C++ type equivalent to T, e.g.: `cutlass::half_t -> Half`
 template <typename T>
 struct equivalent_scalar_type {
   using type = T;
@@ -146,15 +161,15 @@ using equivalent_scalar_type_t = typename equivalent_scalar_type<T>::type;
 
 template <>
 struct equivalent_scalar_type<cutlass::half_t> {
-  using type = c10::Half;
+  using type = torch::headeronly::Half;
 };
 
 template <>
 struct equivalent_scalar_type<cutlass::bfloat16_t> {
-  using type = c10::BFloat16;
+  using type = torch::headeronly::BFloat16;
 };
 
-// get equivalent c10::ScalarType tag from compile time type
+// get equivalent torch::headeronly::ScalarType tag from compile time type
 template <typename T>
-static inline constexpr c10::ScalarType equivalent_scalar_type_v =
-    c10::CppTypeToScalarType<equivalent_scalar_type_t<T>>::value;
+static inline constexpr torch::headeronly::ScalarType equivalent_scalar_type_v =
+    torch::headeronly::CppTypeToScalarType<equivalent_scalar_type_t<T>>::value;

csrc/libtorch_stable/cutlass_extensions/epilogue/scaled_mm_epilogues_c2x.hpp

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/csrc/stable/tensor.h>
+
 #include "cutlass_extensions/epilogue/broadcast_load_epilogue_c2x.hpp"
 
 /*
@@ -52,7 +54,7 @@ struct ScaledEpilogueBase {
   // from a tensor. It can handle both row and column, as well as row/column or
   // scalar cases.
   template <typename Descriptor, typename T>
-  static auto args_from_tensor(torch::Tensor const& tensor) {
+  static auto args_from_tensor(torch::stable::Tensor const& tensor) {
     using Arguments = typename Descriptor::Arguments;
     auto* data_ptr = static_cast<T*>(tensor.data_ptr());
     if constexpr (std::is_same_v<Descriptor, ColOrScalarLoad<T>> ||
@@ -68,7 +70,8 @@ struct ScaledEpilogueBase {
   // This overload handles the case where there might not be a tensor, in which
   // case a nullptr is passed and a constant (0) is used.
   template <typename Descriptor, typename T>
-  static auto args_from_tensor(std::optional<torch::Tensor> const& tensor) {
+  static auto args_from_tensor(
+      std::optional<torch::stable::Tensor> const& tensor) {
     static_assert(std::is_same_v<Descriptor, RowOrZeroLoad<T>>);
     using Arguments = typename Descriptor::Arguments;
     auto* data_ptr = tensor ? static_cast<T*>(tensor->data_ptr()) : nullptr;
@@ -117,8 +120,8 @@ struct ScaledEpilogue
       cutlass::epilogue::threadblock::Sm80EVT<Compute1, ScaleA, EVTCompute0>;
   using ArgumentType = typename EVTCompute::Arguments;
 
-  static ArgumentType prepare_args(torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales) {
+  static ArgumentType prepare_args(torch::stable::Tensor const& a_scales,
+                                   torch::stable::Tensor const& b_scales) {
     auto a_args = SUPER::template args_from_tensor<ScaleA, float>(a_scales);
     auto b_args = SUPER::template args_from_tensor<ScaleB, float>(b_scales);
 
@@ -160,9 +163,9 @@ struct ScaledEpilogueBias
   using EVTCompute = cutlass::epilogue::threadblock::Sm80EVT<Compute1, ScaleA,
                                                              EVTCompute0, Bias>;
   using ArgumentType = typename EVTCompute::Arguments;
-  static ArgumentType prepare_args(torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales,
-                                   torch::Tensor const& bias) {
+  static ArgumentType prepare_args(torch::stable::Tensor const& a_scales,
+                                   torch::stable::Tensor const& b_scales,
+                                   torch::stable::Tensor const& bias) {
     auto a_args = SUPER::template args_from_tensor<ScaleA, float>(a_scales);
     auto b_args = SUPER::template args_from_tensor<ScaleB, float>(b_scales);
     auto bias_args = SUPER::template args_from_tensor<Bias, ElementD>(bias);
@@ -220,10 +223,11 @@ struct ScaledEpilogueBiasAzp
 
   using ArgumentType = typename EVTCompute::Arguments;
 
-  static ArgumentType prepare_args(torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales,
-                                   torch::Tensor const& azp_adj,
-                                   std::optional<torch::Tensor> const& bias) {
+  static ArgumentType prepare_args(
+      torch::stable::Tensor const& a_scales,
+      torch::stable::Tensor const& b_scales,
+      torch::stable::Tensor const& azp_adj,
+      std::optional<torch::stable::Tensor> const& bias) {
     auto a_args = SUPER::template args_from_tensor<ScaleA, float>(a_scales);
     auto b_args = SUPER::template args_from_tensor<ScaleB, float>(b_scales);
     auto bias_args = SUPER::template args_from_tensor<Bias, ElementD>(bias);
@@ -298,11 +302,11 @@ struct ScaledEpilogueBiasAzpToken
 
   using ArgumentType = typename EVTCompute::Arguments;
 
-  static ArgumentType prepare_args(torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales,
-                                   torch::Tensor const& azp_adj,
-                                   torch::Tensor const& azp,
-                                   std::optional<torch::Tensor> const& bias) {
+  static ArgumentType prepare_args(
+      torch::stable::Tensor const& a_scales,
+      torch::stable::Tensor const& b_scales,
+      torch::stable::Tensor const& azp_adj, torch::stable::Tensor const& azp,
+      std::optional<torch::stable::Tensor> const& bias) {
     auto a_args = SUPER::template args_from_tensor<ScaleA, float>(a_scales);
     auto b_args = SUPER::template args_from_tensor<ScaleB, float>(b_scales);
     auto bias_args = SUPER::template args_from_tensor<Bias, ElementD>(bias);

csrc/libtorch_stable/dispatch_utils.h

@@ -49,6 +49,15 @@
   THO_DISPATCH_SWITCH(TYPE, NAME,                       \
                       VLLM_STABLE_DISPATCH_CASE_FP8_TYPES(__VA_ARGS__))
 
+// Half types dispatch (Half + BFloat16)
+#define VLLM_STABLE_DISPATCH_CASE_HALF_TYPES(...)                     \
+  THO_DISPATCH_CASE(torch::headeronly::ScalarType::Half, __VA_ARGS__) \
+  THO_DISPATCH_CASE(torch::headeronly::ScalarType::BFloat16, __VA_ARGS__)
+
+#define VLLM_STABLE_DISPATCH_HALF_TYPES(TYPE, NAME, ...) \
+  THO_DISPATCH_SWITCH(TYPE, NAME,                        \
+                      VLLM_STABLE_DISPATCH_CASE_HALF_TYPES(__VA_ARGS__))
+
 // Boolean dispatch
 #define VLLM_STABLE_DISPATCH_BOOL(expr, const_expr, ...) \
   if (expr) {                                            \

csrc/libtorch_stable/ops.h

@@ -27,4 +27,111 @@ void per_token_group_quant_int8(const torch::stable::Tensor& input,
                                 torch::stable::Tensor& output_s,
                                 int64_t group_size, double eps, double int8_min,
                                 double int8_max);
+
+bool cutlass_scaled_mm_supports_fp8(int64_t cuda_device_capability);
+bool cutlass_scaled_mm_supports_block_fp8(int64_t cuda_device_capability);
+bool cutlass_group_gemm_supported(int64_t cuda_device_capability);
+
+void cutlass_scaled_mm(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b,
+                       torch::stable::Tensor const& a_scales,
+                       torch::stable::Tensor const& b_scales,
+                       std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_moe_mm(torch::stable::Tensor& out_tensors,
+                    torch::stable::Tensor const& a_tensors,
+                    torch::stable::Tensor const& b_tensors,
+                    torch::stable::Tensor const& a_scales,
+                    torch::stable::Tensor const& b_scales,
+                    torch::stable::Tensor const& expert_offsets,
+                    torch::stable::Tensor const& problem_sizes,
+                    torch::stable::Tensor const& a_strides,
+                    torch::stable::Tensor const& b_strides,
+                    torch::stable::Tensor const& c_strides, bool per_act_token,
+                    bool per_out_ch);
+
+void cutlass_scaled_mm_azp(torch::stable::Tensor& out,
+                           torch::stable::Tensor const& a,
+                           torch::stable::Tensor const& b,
+                           torch::stable::Tensor const& a_scales,
+                           torch::stable::Tensor const& b_scales,
+                           torch::stable::Tensor const& azp_adj,
+                           std::optional<torch::stable::Tensor> const& azp,
+                           std::optional<torch::stable::Tensor> const& bias);
+
+void get_cutlass_moe_mm_data(
+    const torch::stable::Tensor& topk_ids,
+    torch::stable::Tensor& expert_offsets,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2,
+    torch::stable::Tensor& input_permutation,
+    torch::stable::Tensor& output_permutation, const int64_t num_experts,
+    const int64_t n, const int64_t k,
+    const std::optional<torch::stable::Tensor>& blockscale_offsets,
+    const bool is_gated);
+
+void get_cutlass_moe_mm_problem_sizes_from_expert_offsets(
+    const torch::stable::Tensor& expert_first_token_offset,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2, const int64_t n, const int64_t k,
+    const bool swap_ab);
+
+void get_cutlass_batched_moe_mm_data(
+    torch::stable::Tensor& expert_offsets,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2,
+    const torch::stable::Tensor& expert_num_tokens,
+    const int64_t num_local_experts, const int64_t padded_m, const int64_t n,
+    const int64_t k);
+
+// FP4/NVFP4 ops
+bool cutlass_scaled_mm_supports_fp4(int64_t cuda_device_capability);
+
+void cutlass_scaled_fp4_mm(torch::stable::Tensor& D,
+                           torch::stable::Tensor const& A,
+                           torch::stable::Tensor const& B,
+                           torch::stable::Tensor const& A_sf,
+                           torch::stable::Tensor const& B_sf,
+                           torch::stable::Tensor const& alpha);
+
+void cutlass_fp4_group_mm(torch::stable::Tensor& output,
+                          const torch::stable::Tensor& a,
+                          const torch::stable::Tensor& b,
+                          const torch::stable::Tensor& a_blockscale,
+                          const torch::stable::Tensor& b_blockscales,
+                          const torch::stable::Tensor& alphas,
+                          const torch::stable::Tensor& problem_sizes,
+                          const torch::stable::Tensor& expert_offsets,
+                          const torch::stable::Tensor& sf_offsets);
+
+std::tuple<torch::stable::Tensor, torch::stable::Tensor> scaled_fp4_quant_func(
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_scale, bool is_sf_swizzled_layout);
+
+void scaled_fp4_quant_out(torch::stable::Tensor const& input,
+                          torch::stable::Tensor const& input_scale,
+                          bool is_sf_swizzled_layout,
+                          torch::stable::Tensor& output,
+                          torch::stable::Tensor& output_scale);
+
+void scaled_fp4_experts_quant(
+    torch::stable::Tensor& output, torch::stable::Tensor& output_scale,
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_global_scale,
+    torch::stable::Tensor const& input_offset_by_experts,
+    torch::stable::Tensor const& output_scale_offset_by_experts);
+
+void silu_and_mul_scaled_fp4_experts_quant(
+    torch::stable::Tensor& output, torch::stable::Tensor& output_scale,
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_global_scale,
+    torch::stable::Tensor const& input_offset_by_experts,
+    torch::stable::Tensor const& output_scale_offset_by_experts);
+
+void silu_and_mul_nvfp4_quant(torch::stable::Tensor& out,
+                              torch::stable::Tensor& output_block_scale,
+                              torch::stable::Tensor& input,
+                              torch::stable::Tensor& input_global_scale);
+
 #endif

csrc/libtorch_stable/quantization/cutlass_w4a8/get_group_starts.cuh

@@ -2,10 +2,9 @@
 #pragma once
 
 #include <cuda.h>
-#include <torch/all.h>
-#include <c10/cuda/CUDAStream.h>
+#include <torch/csrc/stable/tensor.h>
+#include "libtorch_stable/torch_utils.h"
 
-#include "core/scalar_type.hpp"
 #include "cutlass/bfloat16.h"
 #include "cutlass/float8.h"
 
@@ -41,7 +40,7 @@ __global__ void get_group_gemm_starts(
 }
 
 #define __CALL_GET_STARTS_KERNEL(TENSOR_C_TYPE, C_TYPE)                  \
-  else if (out_tensors.dtype() == TENSOR_C_TYPE) {                       \
+  else if (out_tensors.scalar_type() == TENSOR_C_TYPE) {                 \
     get_group_gemm_starts<cutlass::float_e4m3_t, int32_t, C_TYPE, float, \
                           cutlass::Array<cutlass::float_e4m3_t, 8>>      \
         <<<1, num_experts, 0, stream>>>(                                 \
@@ -66,23 +65,34 @@ __global__ void get_group_gemm_starts(
 namespace {
 
 void run_get_group_gemm_starts(
-    torch::Tensor const& expert_offsets, torch::Tensor& a_ptrs,
-    torch::Tensor& b_ptrs, torch::Tensor& out_ptrs,
-    torch::Tensor& a_scales_ptrs, torch::Tensor& b_scales_ptrs,
-    torch::Tensor& b_group_scales_ptrs, torch::Tensor const& a_tensors,
-    torch::Tensor const& b_tensors, torch::Tensor& out_tensors,
-    torch::Tensor const& a_scales, torch::Tensor const& b_scales,
-    torch::Tensor const& b_group_scales, const int64_t b_group_size) {
-  TORCH_CHECK(a_tensors.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(b_tensors.dtype() == torch::kInt32);  // int4 8x packed into int32
-  TORCH_CHECK(a_scales.dtype() == torch::kFloat32);
-  TORCH_CHECK(b_scales.dtype() == torch::kFloat32);
-  TORCH_CHECK(b_group_scales.dtype() ==
-              torch::kFloat8_e4m3fn);  // the underlying torch type is e4m3
-  TORCH_CHECK(out_tensors.dtype() ==
-              torch::kBFloat16);  // only support bf16 for now
+    torch::stable::Tensor const& expert_offsets, torch::stable::Tensor& a_ptrs,
+    torch::stable::Tensor& b_ptrs, torch::stable::Tensor& out_ptrs,
+    torch::stable::Tensor& a_scales_ptrs, torch::stable::Tensor& b_scales_ptrs,
+    torch::stable::Tensor& b_group_scales_ptrs,
+    torch::stable::Tensor const& a_tensors,
+    torch::stable::Tensor const& b_tensors, torch::stable::Tensor& out_tensors,
+    torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales,
+    torch::stable::Tensor const& b_group_scales, const int64_t b_group_size) {
+  STD_TORCH_CHECK(a_tensors.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(
+      b_tensors.scalar_type() ==
+      torch::headeronly::ScalarType::Int);  // int4 8x packed into int32
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(
+      b_group_scales.scalar_type() ==
+      torch::headeronly::ScalarType::Float8_e4m3fn);  // the underlying torch
+                                                      // type is e4m3
+  STD_TORCH_CHECK(
+      out_tensors.scalar_type() ==
+      torch::headeronly::ScalarType::BFloat16);  // only support bf16 for now
   // expect int64_t to avoid overflow during offset calculations
-  TORCH_CHECK(expert_offsets.dtype() == torch::kInt64);
+  STD_TORCH_CHECK(expert_offsets.scalar_type() ==
+                  torch::headeronly::ScalarType::Long);
 
   int num_experts = static_cast<int>(expert_offsets.size(0));
   // logical k, n
@@ -90,15 +100,16 @@ void run_get_group_gemm_starts(
   int64_t k = a_tensors.size(1);
   int64_t scale_k = cutlass::ceil_div(k, b_group_size);
 
-  auto stream = at::cuda::getCurrentCUDAStream(a_tensors.device().index());
+  auto stream = get_current_cuda_stream(a_tensors.get_device_index());
 
   if (false) {
   }
-  __CALL_GET_STARTS_KERNEL(torch::kBFloat16, cutlass::bfloat16_t)
-  __CALL_GET_STARTS_KERNEL(torch::kFloat16, half)
+  __CALL_GET_STARTS_KERNEL(torch::headeronly::ScalarType::BFloat16,
+                           cutlass::bfloat16_t)
+  __CALL_GET_STARTS_KERNEL(torch::headeronly::ScalarType::Half, half)
   else {
-    TORCH_CHECK(false, "Invalid output type (must be float16 or bfloat16)");
+    STD_TORCH_CHECK(false, "Invalid output type (must be float16 or bfloat16)");
   }
 }
 
-}  // namespace
+}  // namespace

csrc/libtorch_stable/quantization/cutlass_w4a8/w4a8_grouped_mm_entry.cu

@@ -14,13 +14,12 @@
 #include "cutlass/util/mixed_dtype_utils.hpp"
 
 // vllm includes
-#include <ATen/cuda/CUDAContext.h>
-#include <c10/cuda/CUDAGuard.h>
-#include <torch/all.h>
+#include <torch/csrc/stable/library.h>
+#include <torch/csrc/stable/tensor.h>
+#include "libtorch_stable/torch_utils.h"
 #include "cutlass_extensions/torch_utils.hpp"
 #include "cutlass_extensions/common.hpp"
 
-#include "core/registration.h"
 #include "get_group_starts.cuh"
 #include "cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp"
 #include "w4a8_utils.cuh"
@@ -168,31 +167,40 @@ struct W4A8GroupedGemmKernel {
   static_assert(sizeof(LayoutB_Reordered) % sizeof(int32_t) == 0,
                 "LayoutB_Reordered size must be divisible by 4 bytes");
 
-  static void grouped_mm(
-      torch::Tensor& out_tensors, const torch::Tensor& a_tensors,
-      const torch::Tensor& b_tensors, const torch::Tensor& a_scales,
-      const torch::Tensor& b_scales, const torch::Tensor& b_group_scales,
-      const int64_t b_group_size, const torch::Tensor& expert_offsets,
-      const torch::Tensor& problem_sizes_torch, const torch::Tensor& a_strides,
-      const torch::Tensor& b_strides, const torch::Tensor& c_strides,
-      const torch::Tensor& group_scale_strides) {
+  static void grouped_mm(torch::stable::Tensor& out_tensors,
+                         const torch::stable::Tensor& a_tensors,
+                         const torch::stable::Tensor& b_tensors,
+                         const torch::stable::Tensor& a_scales,
+                         const torch::stable::Tensor& b_scales,
+                         const torch::stable::Tensor& b_group_scales,
+                         const int64_t b_group_size,
+                         const torch::stable::Tensor& expert_offsets,
+                         const torch::stable::Tensor& problem_sizes_torch,
+                         const torch::stable::Tensor& a_strides,
+                         const torch::stable::Tensor& b_strides,
+                         const torch::stable::Tensor& c_strides,
+                         const torch::stable::Tensor& group_scale_strides) {
     auto device = a_tensors.device();
     auto device_id = device.index();
-    const at::cuda::OptionalCUDAGuard device_guard(device);
-    auto stream = at::cuda::getCurrentCUDAStream(device_id);
+    const torch::stable::accelerator::DeviceGuard device_guard(device_id);
+    auto stream = get_current_cuda_stream(device_id);
 
     int num_experts = static_cast<int>(expert_offsets.size(0));
     int n = static_cast<int>(b_tensors.size(1));
     int k = static_cast<int>(b_tensors.size(2)) * PackFactor;
 
-    auto options_int =
-        torch::TensorOptions().dtype(torch::kInt64).device(device);
-    torch::Tensor a_ptrs = torch::empty(num_experts, options_int);
-    torch::Tensor b_ptrs = torch::empty(num_experts, options_int);
-    torch::Tensor out_ptrs = torch::empty(num_experts, options_int);
-    torch::Tensor a_scales_ptrs = torch::empty(num_experts, options_int);
-    torch::Tensor b_scales_ptrs = torch::empty(num_experts, options_int);
-    torch::Tensor b_group_scales_ptrs = torch::empty(num_experts, options_int);
+    torch::stable::Tensor a_ptrs = torch::stable::empty(
+        num_experts, torch::headeronly::ScalarType::Long, std::nullopt, device);
+    torch::stable::Tensor b_ptrs = torch::stable::empty(
+        num_experts, torch::headeronly::ScalarType::Long, std::nullopt, device);
+    torch::stable::Tensor out_ptrs = torch::stable::empty(
+        num_experts, torch::headeronly::ScalarType::Long, std::nullopt, device);
+    torch::stable::Tensor a_scales_ptrs = torch::stable::empty(
+        num_experts, torch::headeronly::ScalarType::Long, std::nullopt, device);
+    torch::stable::Tensor b_scales_ptrs = torch::stable::empty(
+        num_experts, torch::headeronly::ScalarType::Long, std::nullopt, device);
+    torch::stable::Tensor b_group_scales_ptrs = torch::stable::empty(
+        num_experts, torch::headeronly::ScalarType::Long, std::nullopt, device);
 
     // get the correct offsets to pass to gemm
     run_get_group_gemm_starts(expert_offsets, a_ptrs, b_ptrs, out_ptrs,
@@ -247,9 +255,9 @@ struct W4A8GroupedGemmKernel {
 
     // Allocate workspace
     size_t workspace_size = GemmShuffled::get_workspace_size(arguments);
-    torch::Tensor workspace =
-        torch::empty(workspace_size,
-                     torch::TensorOptions().dtype(torch::kU8).device(device));
+    torch::stable::Tensor workspace = torch::stable::empty(
+        workspace_size, torch::headeronly::ScalarType::Byte, std::nullopt,
+        device);
 
     // Run GEMM
     GemmShuffled gemm;
@@ -294,14 +302,20 @@ using Kernel_256x128_2x1x1_Coop =
 using Kernel_128x256_2x1x1_Coop =
     W4A8GroupedGemmKernel<Shape<_128, _256>, Shape<_2, _1, _1>, Coop, CoopEpi>;
 
-void mm_dispatch(
-    torch::Tensor& out_tensors, const torch::Tensor& a_tensors,
-    const torch::Tensor& b_tensors, const torch::Tensor& a_scales,
-    const torch::Tensor& b_scales, const torch::Tensor& b_group_scales,
-    const int64_t b_group_size, const torch::Tensor& expert_offsets,
-    const torch::Tensor& problem_sizes, const torch::Tensor& a_strides,
-    const torch::Tensor& b_strides, const torch::Tensor& c_strides,
-    const torch::Tensor& group_scale_strides, const std::string& schedule) {
+void mm_dispatch(torch::stable::Tensor& out_tensors,
+                 const torch::stable::Tensor& a_tensors,
+                 const torch::stable::Tensor& b_tensors,
+                 const torch::stable::Tensor& a_scales,
+                 const torch::stable::Tensor& b_scales,
+                 const torch::stable::Tensor& b_group_scales,
+                 const int64_t b_group_size,
+                 const torch::stable::Tensor& expert_offsets,
+                 const torch::stable::Tensor& problem_sizes,
+                 const torch::stable::Tensor& a_strides,
+                 const torch::stable::Tensor& b_strides,
+                 const torch::stable::Tensor& c_strides,
+                 const torch::stable::Tensor& group_scale_strides,
+                 const std::string& schedule) {
   if (schedule == "Kernel_128x16_1x1x1_Coop") {
     Kernel_128x16_1x1x1_Coop::grouped_mm(
         out_tensors, a_tensors, b_tensors, a_scales, b_scales, b_group_scales,
@@ -358,18 +372,23 @@ void mm_dispatch(
         b_group_size, expert_offsets, problem_sizes, a_strides, b_strides,
         c_strides, group_scale_strides);
   } else {
-    TORCH_CHECK(false,
-                "cutlass_w4a8_moe_mm: unknown schedule string: ", schedule);
+    STD_TORCH_CHECK(false,
+                    "cutlass_w4a8_moe_mm: unknown schedule string: ", schedule);
   }
 }
 
-void mm(torch::Tensor& out_tensors, const torch::Tensor& a_tensors,
-        const torch::Tensor& b_tensors, const torch::Tensor& a_scales,
-        const torch::Tensor& b_scales, const torch::Tensor& b_group_scales,
-        const int64_t b_group_size, const torch::Tensor& expert_offsets,
-        const torch::Tensor& problem_sizes, const torch::Tensor& a_strides,
-        const torch::Tensor& b_strides, const torch::Tensor& c_strides,
-        const torch::Tensor& group_scale_strides,
+void mm(torch::stable::Tensor& out_tensors,
+        const torch::stable::Tensor& a_tensors,
+        const torch::stable::Tensor& b_tensors,
+        const torch::stable::Tensor& a_scales,
+        const torch::stable::Tensor& b_scales,
+        const torch::stable::Tensor& b_group_scales, const int64_t b_group_size,
+        const torch::stable::Tensor& expert_offsets,
+        const torch::stable::Tensor& problem_sizes,
+        const torch::stable::Tensor& a_strides,
+        const torch::stable::Tensor& b_strides,
+        const torch::stable::Tensor& c_strides,
+        const torch::stable::Tensor& group_scale_strides,
         std::optional<std::string> maybe_schedule) {
   // user has specified a schedule
   if (maybe_schedule) {
@@ -406,26 +425,27 @@ void mm(torch::Tensor& out_tensors, const torch::Tensor& a_tensors,
               a_strides, b_strides, c_strides, group_scale_strides, schedule);
 }
 
-std::tuple<torch::Tensor, torch::Tensor> encode_and_reorder_int4b(
-    torch::Tensor const& b_tensors) {
-  TORCH_CHECK(b_tensors.dtype() == torch::kInt32);
-  TORCH_CHECK(b_tensors.dim() == 3);  // (experts, n, k)
-  TORCH_CHECK(b_tensors.is_contiguous());
-  TORCH_CHECK(b_tensors.is_cuda());
+std::tuple<torch::stable::Tensor, torch::stable::Tensor>
+encode_and_reorder_int4b(torch::stable::Tensor const& b_tensors) {
+  STD_TORCH_CHECK(b_tensors.scalar_type() ==
+                  torch::headeronly::ScalarType::Int);
+  STD_TORCH_CHECK(b_tensors.dim() == 3);  // (experts, n, k)
+  STD_TORCH_CHECK(b_tensors.is_contiguous());
+  STD_TORCH_CHECK(b_tensors.is_cuda());
 
   int n = static_cast<int>(b_tensors.size(1));
   int k = static_cast<int>(b_tensors.size(2)) * PackFactor;  // logical k
 
   // CUTLASS reorder_tensor requires k % 256 == 0 and n % 16 == 0.
   // These misalignments cause silent OOB unless run under Compute Sanitizer.
-  TORCH_CHECK(k % 256 == 0, "logical k must be divisible by 256");
-  TORCH_CHECK(n % 16 == 0, "n must be divisible by 16");
+  STD_TORCH_CHECK(k % 256 == 0, "logical k must be divisible by 256");
+  STD_TORCH_CHECK(n % 16 == 0, "n must be divisible by 16");
 
   // we will store the layout to an int32 tensor;
   // this is the number of elements we need per layout
   constexpr size_t layout_width = sizeof(LayoutB_Reordered) / sizeof(int32_t);
 
-  torch::Tensor b_tensors_packed = torch::empty_like(b_tensors);
+  torch::stable::Tensor b_tensors_packed = torch::stable::empty_like(b_tensors);
   int num_experts = static_cast<int>(b_tensors.size(0));
 
   auto b_ptr = static_cast<QuantType const*>(b_tensors.const_data_ptr());
@@ -435,7 +455,7 @@ std::tuple<torch::Tensor, torch::Tensor> encode_and_reorder_int4b(
   size_t num_int4_elems = 1ull * num_experts * n * k;
   bool ok = vllm::cutlass_w4a8_utils::unified_encode_int4b(b_ptr, b_packed_ptr,
                                                            num_int4_elems);
-  TORCH_CHECK(ok, "unified_encode_int4b failed");
+  STD_TORCH_CHECK(ok, "unified_encode_int4b failed");
 
   // construct the layout once; assumes each expert has the same layout
   using LayoutType = LayoutB_Reordered;
@@ -456,28 +476,28 @@ std::tuple<torch::Tensor, torch::Tensor> encode_and_reorder_int4b(
   }
 
   // save the packed layout to torch tensor so we can re-use it
-  auto cpu_opts =
-      torch::TensorOptions().dtype(torch::kInt32).device(torch::kCPU);
-  torch::Tensor layout_cpu =
-      torch::empty({num_experts, layout_width}, cpu_opts);
+  torch::stable::Tensor layout_cpu = torch::stable::empty(
+      {num_experts, layout_width}, torch::headeronly::ScalarType::Int,
+      std::nullopt, torch::stable::Device(torch::stable::DeviceType::CPU));
 
-  int32_t* layout_data = layout_cpu.data_ptr<int32_t>();
+  int32_t* layout_data = layout_cpu.mutable_data_ptr<int32_t>();
   for (int i = 0; i < num_experts; ++i) {
     std::memcpy(layout_data + i * layout_width,  // dst (int32*)
                 &layout_B_reordered,             // src (LayoutType*)
                 sizeof(LayoutType));             // number of bytes
   }
 
-  torch::Tensor packed_layout =
-      layout_cpu.to(b_tensors.device(), /*non_blocking=*/false);
+  torch::stable::Tensor packed_layout =
+      torch::stable::to(layout_cpu, b_tensors.device(),
+                        /*non_blocking=*/false);
 
   return {b_tensors_packed, packed_layout};
 }
 
-TORCH_LIBRARY_IMPL_EXPAND(TORCH_EXTENSION_NAME, CUDA, m) {
-  m.impl("cutlass_w4a8_moe_mm", &mm);
-  m.impl("cutlass_encode_and_reorder_int4b_grouped", &encode_and_reorder_int4b);
+STABLE_TORCH_LIBRARY_IMPL(_C, CUDA, m) {
+  m.impl("cutlass_w4a8_moe_mm", TORCH_BOX(&mm));
+  m.impl("cutlass_encode_and_reorder_int4b_grouped",
+         TORCH_BOX(&encode_and_reorder_int4b));
 }
 
 }  // namespace vllm::cutlass_w4a8_moe
-/////////////////////////////////////////////////////////////////////////////////////////////////

csrc/libtorch_stable/quantization/cutlass_w4a8/w4a8_mm_entry.cu

@@ -3,14 +3,12 @@
 //   https://github.com/NVIDIA/cutlass/blob/main/examples/55_hopper_mixed_dtype_gemm/55_hopper_int4_fp8_gemm.cu
 //
 
-#include <ATen/cuda/CUDAContext.h>
-#include <c10/cuda/CUDAGuard.h>
-#include <torch/all.h>
+#include <torch/csrc/stable/library.h>
+#include <torch/csrc/stable/tensor.h>
+#include "libtorch_stable/torch_utils.h"
 #include "cutlass_extensions/torch_utils.hpp"
 #include "w4a8_utils.cuh"
 
-#include "core/registration.h"
-
 #include "cutlass/cutlass.h"
 #include <limits>
 
@@ -161,31 +159,31 @@ struct W4A8GemmKernel {
   using StrideD = typename GemmKernelShuffled::StrideD;
   using StrideS = typename CollectiveMainloopShuffled::StrideScale;
 
-  static torch::Tensor mm(torch::Tensor const& A,
-                          torch::Tensor const& B,             // already packed
-                          torch::Tensor const& group_scales,  // already packed
-                          int64_t group_size,
-                          torch::Tensor const& channel_scales,
-                          torch::Tensor const& token_scales,
-                          std::optional<at::ScalarType> const& maybe_out_type) {
+  static torch::stable::Tensor mm(
+      torch::stable::Tensor const& A,
+      torch::stable::Tensor const& B,             // already packed
+      torch::stable::Tensor const& group_scales,  // already packed
+      int64_t group_size, torch::stable::Tensor const& channel_scales,
+      torch::stable::Tensor const& token_scales,
+      std::optional<torch::headeronly::ScalarType> const& maybe_out_type) {
     // TODO: param validation
     int m = A.size(0);
     int k = A.size(1);
     int n = B.size(1);
 
     // safely cast group_size to int
-    TORCH_CHECK(group_size > 0 && group_size <= std::numeric_limits<int>::max(),
-                "group_size out of supported range for int: ", group_size);
+    STD_TORCH_CHECK(
+        group_size > 0 && group_size <= std::numeric_limits<int>::max(),
+        "group_size out of supported range for int: ", group_size);
     int const group_size_int = static_cast<int>(group_size);
 
     // Allocate output
-    const at::cuda::OptionalCUDAGuard device_guard(device_of(A));
+    const torch::stable::accelerator::DeviceGuard device_guard(
+        A.get_device_index());
     auto device = A.device();
-    auto stream = at::cuda::getCurrentCUDAStream(device.index());
-    torch::Tensor D =
-        torch::empty({m, n}, torch::TensorOptions()
-                                 .dtype(equivalent_scalar_type_v<ElementD>)
-                                 .device(device));
+    auto stream = get_current_cuda_stream(device.index());
+    torch::stable::Tensor D = torch::stable::empty(
+        {m, n}, equivalent_scalar_type_v<ElementD>, std::nullopt, device);
     // prepare arg pointers
     auto A_ptr = static_cast<MmaType const*>(A.const_data_ptr());
     auto B_ptr = static_cast<QuantType const*>(B.const_data_ptr());
@@ -237,9 +235,9 @@ struct W4A8GemmKernel {
 
     // Workspace
     size_t workspace_size = GemmShuffled::get_workspace_size(arguments);
-    torch::Tensor workspace =
-        torch::empty(workspace_size,
-                     torch::TensorOptions().dtype(torch::kU8).device(device));
+    torch::stable::Tensor workspace = torch::stable::empty(
+        workspace_size, torch::headeronly::ScalarType::Byte, std::nullopt,
+        device);
 
     // Run GEMM
     GemmShuffled gemm;
@@ -269,14 +267,14 @@ using Kernel_128x64_1x1x1 = W4A8GemmKernel<Shape<_128, _64>, Shape<_1, _1, _1>>;
 using Kernel_128x32_1x1x1 = W4A8GemmKernel<Shape<_128, _32>, Shape<_1, _1, _1>>;
 using Kernel_128x16_1x1x1 = W4A8GemmKernel<Shape<_128, _16>, Shape<_1, _1, _1>>;
 
-torch::Tensor mm_dispatch(torch::Tensor const& A,
-                          torch::Tensor const& B,             // already packed
-                          torch::Tensor const& group_scales,  // already packed
-                          int64_t group_size,
-                          torch::Tensor const& channel_scales,
-                          torch::Tensor const& token_scales,
-                          std::optional<at::ScalarType> const& maybe_out_type,
-                          const std::string& schedule) {
+torch::stable::Tensor mm_dispatch(
+    torch::stable::Tensor const& A,
+    torch::stable::Tensor const& B,             // already packed
+    torch::stable::Tensor const& group_scales,  // already packed
+    int64_t group_size, torch::stable::Tensor const& channel_scales,
+    torch::stable::Tensor const& token_scales,
+    std::optional<torch::headeronly::ScalarType> const& maybe_out_type,
+    const std::string& schedule) {
   if (schedule == "256x128_1x1x1") {
     return Kernel_256x128_1x1x1::mm(A, B, group_scales, group_size,
                                     channel_scales, token_scales,
@@ -318,17 +316,18 @@ torch::Tensor mm_dispatch(torch::Tensor const& A,
                                    channel_scales, token_scales,
                                    maybe_out_type);
   }
-  TORCH_CHECK(false, "Unknown W4A8 schedule: ", schedule);
+  STD_TORCH_CHECK(false, "Unknown W4A8 schedule: ", schedule);
   return {};
 }
 
-torch::Tensor mm(torch::Tensor const& A,
-                 torch::Tensor const& B,             // already packed
-                 torch::Tensor const& group_scales,  // already packed
-                 int64_t group_size, torch::Tensor const& channel_scales,
-                 torch::Tensor const& token_scales,
-                 std::optional<at::ScalarType> const& maybe_out_type,
-                 std::optional<std::string> maybe_schedule) {
+torch::stable::Tensor mm(
+    torch::stable::Tensor const& A,
+    torch::stable::Tensor const& B,             // already packed
+    torch::stable::Tensor const& group_scales,  // already packed
+    int64_t group_size, torch::stable::Tensor const& channel_scales,
+    torch::stable::Tensor const& token_scales,
+    std::optional<torch::headeronly::ScalarType> const& maybe_out_type,
+    std::optional<std::string> maybe_schedule) {
   // requested a specific schedule
   if (maybe_schedule) {
     return mm_dispatch(A, B, group_scales, group_size, channel_scales,
@@ -378,14 +377,15 @@ torch::Tensor mm(torch::Tensor const& A,
 // ----------------------------------------------------------------------------
 // Pre-processing utils
 // ----------------------------------------------------------------------------
-torch::Tensor pack_scale_fp8(torch::Tensor const& scales) {
-  TORCH_CHECK(scales.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(scales.is_contiguous());
-  TORCH_CHECK(scales.is_cuda());
+torch::stable::Tensor pack_scale_fp8(torch::stable::Tensor const& scales) {
+  STD_TORCH_CHECK(scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(scales.is_contiguous());
+  STD_TORCH_CHECK(scales.is_cuda());
 
-  auto packed_scales = torch::empty(
-      {scales.numel() * ScalePackSize},
-      torch::TensorOptions().dtype(scales.dtype()).device(scales.device()));
+  auto packed_scales =
+      torch::stable::empty({scales.numel() * ScalePackSize},
+                           scales.scalar_type(), std::nullopt, scales.device());
   auto scales_ptr = static_cast<MmaType const*>(scales.const_data_ptr());
   auto packed_scales_ptr =
       static_cast<cutlass::Array<ElementScale, ScalePackSize>*>(
@@ -396,15 +396,16 @@ torch::Tensor pack_scale_fp8(torch::Tensor const& scales) {
   return packed_scales;
 }
 
-torch::Tensor encode_and_reorder_int4b(torch::Tensor const& B) {
-  TORCH_CHECK(B.dtype() == torch::kInt32);
-  TORCH_CHECK(B.dim() == 2);
+torch::stable::Tensor encode_and_reorder_int4b(torch::stable::Tensor const& B) {
+  STD_TORCH_CHECK(B.scalar_type() == torch::headeronly::ScalarType::Int);
+  STD_TORCH_CHECK(B.dim() == 2);
 
-  torch::Tensor B_packed = torch::empty_like(B);
+  torch::stable::Tensor B_packed = torch::stable::empty_like(B);
 
   int k = B.size(0) * PackFactor;  // logical k
   int n = B.size(1);
-  TORCH_CHECK((n * k) % 32 == 0, "need multiples of 32 int4s for 16B chunks");
+  STD_TORCH_CHECK((n * k) % 32 == 0,
+                  "need multiples of 32 int4s for 16B chunks");
 
   auto B_ptr = static_cast<QuantType const*>(B.const_data_ptr());
   auto B_packed_ptr = static_cast<QuantType*>(B_packed.data_ptr());
@@ -415,16 +416,17 @@ torch::Tensor encode_and_reorder_int4b(torch::Tensor const& B) {
 
   bool ok = vllm::cutlass_w4a8_utils::unified_encode_int4b(B_ptr, B_packed_ptr,
                                                            n * k);
-  TORCH_CHECK(ok, "unified_encode_int4b failed");
+  STD_TORCH_CHECK(ok, "unified_encode_int4b failed");
   cutlass::reorder_tensor(B_packed_ptr, layout_B, layout_B_reordered);
 
   return B_packed;
 }
 
-TORCH_LIBRARY_IMPL_EXPAND(TORCH_EXTENSION_NAME, CUDA, m) {
-  m.impl("cutlass_w4a8_mm", &mm);
-  m.impl("cutlass_pack_scale_fp8", &pack_scale_fp8);
-  m.impl("cutlass_encode_and_reorder_int4b", &encode_and_reorder_int4b);
+STABLE_TORCH_LIBRARY_IMPL(_C, CUDA, m) {
+  m.impl("cutlass_w4a8_mm", TORCH_BOX(&mm));
+  m.impl("cutlass_pack_scale_fp8", TORCH_BOX(&pack_scale_fp8));
+  m.impl("cutlass_encode_and_reorder_int4b",
+         TORCH_BOX(&encode_and_reorder_int4b));
 }
 
-}  // namespace vllm::cutlass_w4a8
+}  // namespace vllm::cutlass_w4a8

csrc/libtorch_stable/quantization/fp4/activation_nvfp4_quant_fusion_kernels.cu

@@ -14,16 +14,15 @@
  * limitations under the License.
  */
 
-#include <torch/all.h>
+#include <torch/csrc/stable/tensor.h>
+#include "libtorch_stable/torch_utils.h"
+#include "libtorch_stable/dispatch_utils.h"
+#include "cuda_vec_utils.cuh"
 
 #include <cuda_runtime_api.h>
 #include <cuda_runtime.h>
 
-#include <ATen/cuda/CUDAContext.h>
-#include <c10/cuda/CUDAGuard.h>
-
 #include <cuda_fp8.h>
-#include "dispatch_utils.h"
 
 #include "cuda_utils.h"
 #include "launch_bounds_utils.h"
@@ -118,17 +117,19 @@ __global__ void __launch_bounds__(512, VLLM_BLOCKS_PER_SM(512))
 
 }  // namespace vllm
 
-void silu_and_mul_nvfp4_quant_sm1xxa(torch::Tensor& output,  // [..., d]
-                                     torch::Tensor& output_sf,
-                                     torch::Tensor& input,  // [..., 2 * d]
-                                     torch::Tensor& input_sf) {
+void silu_and_mul_nvfp4_quant_sm1xxa(
+    torch::stable::Tensor& output,  // [..., d]
+    torch::stable::Tensor& output_sf,
+    torch::stable::Tensor& input,  // [..., 2 * d]
+    torch::stable::Tensor& input_sf) {
   int32_t m = input.size(0);
   int32_t n = input.size(1) / 2;
 
-  TORCH_CHECK(n % 16 == 0, "The N dimension must be multiple of 16.");
-  TORCH_CHECK(input.scalar_type() == at::ScalarType::Half ||
-                  input.scalar_type() == at::ScalarType::BFloat16,
-              "Unsupported input data type for quantize_to_fp4.");
+  STD_TORCH_CHECK(n % 16 == 0, "The N dimension must be multiple of 16.");
+  STD_TORCH_CHECK(
+      input.scalar_type() == torch::headeronly::ScalarType::Half ||
+          input.scalar_type() == torch::headeronly::ScalarType::BFloat16,
+      "Unsupported input data type for quantize_to_fp4.");
 
   int multiProcessorCount =
       get_device_attribute(cudaDevAttrMultiProcessorCount, -1);
@@ -136,8 +137,9 @@ void silu_and_mul_nvfp4_quant_sm1xxa(torch::Tensor& output,  // [..., d]
   auto input_sf_ptr = static_cast<float const*>(input_sf.data_ptr());
   auto sf_out = static_cast<int32_t*>(output_sf.data_ptr());
   auto output_ptr = static_cast<int64_t*>(output.data_ptr());
-  const at::cuda::OptionalCUDAGuard device_guard(device_of(input));
-  auto stream = at::cuda::getCurrentCUDAStream(input.get_device());
+  const torch::stable::accelerator::DeviceGuard device_guard(
+      input.get_device_index());
+  auto stream = get_current_cuda_stream(input.get_device_index());
   dim3 block(std::min(int(n / ELTS_PER_THREAD), 512));
   int const numBlocksPerSM =
       vllm_runtime_blocks_per_sm(static_cast<int>(block.x));
@@ -149,7 +151,7 @@ void silu_and_mul_nvfp4_quant_sm1xxa(torch::Tensor& output,  // [..., d]
       int(m), std::max(1, (multiProcessorCount * numBlocksPerSM) / grid_y));
   dim3 grid(grid_x, grid_y);
 
-  VLLM_DISPATCH_HALF_TYPES(
+  VLLM_STABLE_DISPATCH_HALF_TYPES(
       input.scalar_type(), "silu_and_mul_nvfp4_quant_kernel", [&] {
         using cuda_type = vllm::CUDATypeConverter<scalar_t>::Type;
         auto input_ptr = static_cast<cuda_type const*>(input.data_ptr());

csrc/libtorch_stable/quantization/fp4/nvfp4_blockwise_moe_kernel.cu

@@ -14,14 +14,12 @@
  * limitations under the License.
  */
 
-#include "core/registration.h"
+#include <torch/csrc/stable/library.h>
+#include <torch/csrc/stable/tensor.h>
+#include "libtorch_stable/torch_utils.h"
 
-#include <torch/all.h>
 #include <cutlass/arch/arch.h>
 
-#include <ATen/cuda/CUDAContext.h>
-#include <c10/cuda/CUDAGuard.h>
-#include <c10/cuda/CUDAStream.h>
 #include "cutlass_extensions/common.hpp"
 
 #include "cute/tensor.hpp"
@@ -122,7 +120,7 @@ __global__ void __get_group_gemm_starts(
 #define __CALL_GET_STARTS_KERNEL_BLOCKSCALE(ELEMENT_AB_TYPE, SF_TYPE,         \
                                             TENSOR_C_TYPE, C_TYPE, LayoutSFA, \
                                             LayoutSFB, ScaleConfig)           \
-  else if (out_tensors.dtype() == TENSOR_C_TYPE) {                            \
+  else if (out_tensors.scalar_type() == TENSOR_C_TYPE) {                      \
     __get_group_gemm_starts<ELEMENT_AB_TYPE, C_TYPE, SF_TYPE, float,          \
                             LayoutSFA, LayoutSFB, ScaleConfig>                \
         <<<1, num_experts, 0, stream>>>(                                      \
@@ -150,50 +148,64 @@ __global__ void __get_group_gemm_starts(
   }
 
 template <typename LayoutSFA, typename LayoutSFB, typename ScaleConfig>
-void run_get_group_gemm_starts(
-    const torch::Tensor& a_starts, const torch::Tensor& b_starts,
-    const torch::Tensor& out_starts, const torch::Tensor& a_scales_starts,
-    const torch::Tensor& b_scales_starts, const torch::Tensor& alpha_starts,
-    const torch::Tensor& layout_sfa, const torch::Tensor& layout_sfb,
-    const torch::Tensor& a_strides, const torch::Tensor& b_strides,
-    const torch::Tensor& c_strides, int64_t a_stride_val, int64_t b_stride_val,
-    int64_t c_stride_val,
-    /*these are used for their base addresses*/
-    torch::Tensor const& a_tensors, torch::Tensor const& b_tensors,
-    torch::Tensor const& out_tensors, torch::Tensor const& a_scales,
-    torch::Tensor const& b_scales, torch::Tensor const& alphas,
-    torch::Tensor const& expert_offsets, torch::Tensor const& sf_offsets,
-    torch::Tensor const& problem_sizes, int M, int N, int K) {
+void run_get_group_gemm_starts(const torch::stable::Tensor& a_starts,
+                               const torch::stable::Tensor& b_starts,
+                               const torch::stable::Tensor& out_starts,
+                               const torch::stable::Tensor& a_scales_starts,
+                               const torch::stable::Tensor& b_scales_starts,
+                               const torch::stable::Tensor& alpha_starts,
+                               const torch::stable::Tensor& layout_sfa,
+                               const torch::stable::Tensor& layout_sfb,
+                               const torch::stable::Tensor& a_strides,
+                               const torch::stable::Tensor& b_strides,
+                               const torch::stable::Tensor& c_strides,
+                               int64_t a_stride_val, int64_t b_stride_val,
+                               int64_t c_stride_val,
+                               /*these are used for their base addresses*/
+                               torch::stable::Tensor const& a_tensors,
+                               torch::stable::Tensor const& b_tensors,
+                               torch::stable::Tensor const& out_tensors,
+                               torch::stable::Tensor const& a_scales,
+                               torch::stable::Tensor const& b_scales,
+                               torch::stable::Tensor const& alphas,
+                               torch::stable::Tensor const& expert_offsets,
+                               torch::stable::Tensor const& sf_offsets,
+                               torch::stable::Tensor const& problem_sizes,
+                               int M, int N, int K) {
   int num_experts = (int)expert_offsets.size(0);
-  auto stream = at::cuda::getCurrentCUDAStream(a_tensors.device().index());
+  auto stream = get_current_cuda_stream(a_tensors.get_device_index());
 
-  TORCH_CHECK(out_tensors.size(1) == N,
-              "Output tensor shape doesn't match expected shape");
-  TORCH_CHECK(K / 2 == b_tensors.size(2),
-              "b_tensors(dim = 2) and a_tensors(dim = 1) trailing"
-              " dimension must match");
+  STD_TORCH_CHECK(out_tensors.size(1) == N,
+                  "Output tensor shape doesn't match expected shape");
+  STD_TORCH_CHECK(K / 2 == b_tensors.size(2),
+                  "b_tensors(dim = 2) and a_tensors(dim = 1) trailing"
+                  " dimension must match");
   if (false) {
   }
   //(ELEMENT_AB_TYPE, BS_TYPE, TENSOR_C_TYPE, C_TYPE, LayoutSFA, LayoutSFB,
   // ScaleConfig)
   __CALL_GET_STARTS_KERNEL_BLOCKSCALE(
-      cutlass::float_e2m1_t, cutlass::float_ue4m3_t, torch::kBFloat16,
-      cutlass::bfloat16_t, LayoutSFA, LayoutSFB, ScaleConfig)
+      cutlass::float_e2m1_t, cutlass::float_ue4m3_t,
+      torch::headeronly::ScalarType::BFloat16, cutlass::bfloat16_t, LayoutSFA,
+      LayoutSFB, ScaleConfig)
   __CALL_GET_STARTS_KERNEL_BLOCKSCALE(cutlass::float_e2m1_t,
-                                      cutlass::float_ue4m3_t, torch::kFloat16,
-                                      half, LayoutSFA, LayoutSFB, ScaleConfig)
+                                      cutlass::float_ue4m3_t,
+                                      torch::headeronly::ScalarType::Half, half,
+                                      LayoutSFA, LayoutSFB, ScaleConfig)
   else {
-    TORCH_CHECK(false, "Invalid output type (must be float16 or bfloat16)");
+    STD_TORCH_CHECK(false, "Invalid output type (must be float16 or bfloat16)");
   }
 }
 
 template <typename OutType>
 void run_fp4_blockwise_scaled_group_mm_sm100(
-    torch::Tensor& output, const torch::Tensor& a, const torch::Tensor& b,
-    const torch::Tensor& a_blockscale, const torch::Tensor& b_blockscales,
-    const torch::Tensor& alphas, const torch::Tensor& problem_sizes,
-    const torch::Tensor& expert_offsets, const torch::Tensor& sf_offsets, int M,
-    int N, int K) {
+    torch::stable::Tensor& output, const torch::stable::Tensor& a,
+    const torch::stable::Tensor& b, const torch::stable::Tensor& a_blockscale,
+    const torch::stable::Tensor& b_blockscales,
+    const torch::stable::Tensor& alphas,
+    const torch::stable::Tensor& problem_sizes,
+    const torch::stable::Tensor& expert_offsets,
+    const torch::stable::Tensor& sf_offsets, int M, int N, int K) {
   using ProblemShape =
       cutlass::gemm::GroupProblemShape<Shape<int32_t, int32_t, int32_t>>;
   using ElementType = cutlass::float_e2m1_t;
@@ -272,20 +284,40 @@ void run_fp4_blockwise_scaled_group_mm_sm100(
 
   using UnderlyingProblemShape = ProblemShape::UnderlyingProblemShape;
   int num_experts = static_cast<int>(expert_offsets.size(0));
-  auto options_int =
-      torch::TensorOptions().dtype(torch::kInt64).device(a.device());
 
-  torch::Tensor a_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor b_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor out_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor a_scales_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor b_scales_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor alpha_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor layout_sfa = torch::empty({num_experts, 5}, options_int);
-  torch::Tensor layout_sfb = torch::empty({num_experts, 5}, options_int);
-  torch::Tensor a_strides1 = torch::empty(num_experts, options_int);
-  torch::Tensor b_strides1 = torch::empty(num_experts, options_int);
-  torch::Tensor c_strides1 = torch::empty(num_experts, options_int);
+  torch::stable::Tensor a_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor b_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor out_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor a_scales_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor b_scales_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor alpha_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor layout_sfa = torch::stable::empty(
+      {num_experts, 5}, torch::headeronly::ScalarType::Long, std::nullopt,
+      a.device());
+  torch::stable::Tensor layout_sfb = torch::stable::empty(
+      {num_experts, 5}, torch::headeronly::ScalarType::Long, std::nullopt,
+      a.device());
+  torch::stable::Tensor a_strides1 =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor b_strides1 =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor c_strides1 =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
 
   run_get_group_gemm_starts<LayoutSFA, LayoutSFB, ScaleConfig>(
       a_ptrs, b_ptrs, out_ptrs, a_scales_ptrs, b_scales_ptrs, alpha_ptrs,
@@ -308,7 +340,7 @@ void run_fp4_blockwise_scaled_group_mm_sm100(
           typename ProblemShape::UnderlyingProblemShape>::RasterOrderOptions;
   typename Gemm::GemmKernel::TileSchedulerArguments scheduler;
   scheduler.raster_order = RasterOrderOptions::AlongM;
-  hw_info.device_id = a.get_device();
+  hw_info.device_id = a.get_device_index();
   static std::unordered_map<int, int> cached_sm_counts;
   if (cached_sm_counts.find(hw_info.device_id) == cached_sm_counts.end()) {
     cached_sm_counts[hw_info.device_id] =
@@ -350,32 +382,35 @@ void run_fp4_blockwise_scaled_group_mm_sm100(
       scheduler};
 
   size_t workspace_size = Gemm::get_workspace_size(args);
-  auto const workspace_options =
-      torch::TensorOptions().dtype(torch::kUInt8).device(a.device());
-  auto workspace = torch::empty(workspace_size, workspace_options);
-  const cudaStream_t stream = at::cuda::getCurrentCUDAStream(a.get_device());
+  auto workspace =
+      torch::stable::empty(workspace_size, torch::headeronly::ScalarType::Byte,
+                           std::nullopt, a.device());
+  const cudaStream_t stream = get_current_cuda_stream(a.get_device_index());
 
   auto can_implement_status = gemm_op.can_implement(args);
-  TORCH_CHECK(can_implement_status == cutlass::Status::kSuccess,
-              "Failed to implement GEMM: status=", (int)can_implement_status);
+  STD_TORCH_CHECK(
+      can_implement_status == cutlass::Status::kSuccess,
+      "Failed to implement GEMM: status=", (int)can_implement_status);
 
   // Run the GEMM
   auto status = gemm_op.initialize(args, workspace.data_ptr());
-  TORCH_CHECK(status == cutlass::Status::kSuccess,
-              "Failed to initialize GEMM: status=", (int)status,
-              " workspace_size=", workspace_size, " num_experts=", num_experts,
-              " M=", M, " N=", N, " K=", K);
+  STD_TORCH_CHECK(status == cutlass::Status::kSuccess,
+                  "Failed to initialize GEMM: status=", (int)status,
+                  " workspace_size=", workspace_size,
+                  " num_experts=", num_experts, " M=", M, " N=", N, " K=", K);
 
   status = gemm_op.run(args, workspace.data_ptr(), stream);
-  TORCH_CHECK(status == cutlass::Status::kSuccess, "Failed to run GEMM");
+  STD_TORCH_CHECK(status == cutlass::Status::kSuccess, "Failed to run GEMM");
 }
 
 void run_fp4_blockwise_scaled_group_mm_sm120(
-    torch::Tensor& output, const torch::Tensor& a, const torch::Tensor& b,
-    const torch::Tensor& a_blockscale, const torch::Tensor& b_blockscales,
-    const torch::Tensor& alphas, const torch::Tensor& problem_sizes,
-    const torch::Tensor& expert_offsets, const torch::Tensor& sf_offsets, int M,
-    int N, int K) {
+    torch::stable::Tensor& output, const torch::stable::Tensor& a,
+    const torch::stable::Tensor& b, const torch::stable::Tensor& a_blockscale,
+    const torch::stable::Tensor& b_blockscales,
+    const torch::stable::Tensor& alphas,
+    const torch::stable::Tensor& problem_sizes,
+    const torch::stable::Tensor& expert_offsets,
+    const torch::stable::Tensor& sf_offsets, int M, int N, int K) {
   using ProblemShape =
       cutlass::gemm::GroupProblemShape<Shape<int32_t, int32_t, int32_t>>;
   using ElementType = cutlass::float_e2m1_t;
@@ -446,20 +481,40 @@ void run_fp4_blockwise_scaled_group_mm_sm120(
 
   using UnderlyingProblemShape = ProblemShape::UnderlyingProblemShape;
   int num_experts = static_cast<int>(expert_offsets.size(0));
-  auto options_int =
-      torch::TensorOptions().dtype(torch::kInt64).device(a.device());
 
-  torch::Tensor a_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor b_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor out_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor a_scales_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor b_scales_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor alpha_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor layout_sfa = torch::empty({num_experts, 5}, options_int);
-  torch::Tensor layout_sfb = torch::empty({num_experts, 5}, options_int);
-  torch::Tensor a_strides1 = torch::empty(num_experts, options_int);
-  torch::Tensor b_strides1 = torch::empty(num_experts, options_int);
-  torch::Tensor c_strides1 = torch::empty(num_experts, options_int);
+  torch::stable::Tensor a_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor b_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor out_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor a_scales_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor b_scales_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor alpha_ptrs =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor layout_sfa = torch::stable::empty(
+      {num_experts, 5}, torch::headeronly::ScalarType::Long, std::nullopt,
+      a.device());
+  torch::stable::Tensor layout_sfb = torch::stable::empty(
+      {num_experts, 5}, torch::headeronly::ScalarType::Long, std::nullopt,
+      a.device());
+  torch::stable::Tensor a_strides1 =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor b_strides1 =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
+  torch::stable::Tensor c_strides1 =
+      torch::stable::empty(num_experts, torch::headeronly::ScalarType::Long,
+                           std::nullopt, a.device());
 
   run_get_group_gemm_starts<LayoutSFA, LayoutSFB, ScaleConfig>(
       a_ptrs, b_ptrs, out_ptrs, a_scales_ptrs, b_scales_ptrs, alpha_ptrs,
@@ -480,7 +535,7 @@ void run_fp4_blockwise_scaled_group_mm_sm120(
   using RasterOrderOptions = cutlass::gemm::kernel::detail::RasterOrderOptions;
   typename Gemm::GemmKernel::TileSchedulerArguments scheduler;
   scheduler.raster_order = RasterOrderOptions::AlongM;
-  hw_info.device_id = a.get_device();
+  hw_info.device_id = a.get_device_index();
   static std::unordered_map<int, int> cached_sm_counts;
   if (cached_sm_counts.find(hw_info.device_id) == cached_sm_counts.end()) {
     cached_sm_counts[hw_info.device_id] =
@@ -523,33 +578,36 @@ void run_fp4_blockwise_scaled_group_mm_sm120(
       scheduler};
 
   size_t workspace_size = Gemm::get_workspace_size(args);
-  auto const workspace_options =
-      torch::TensorOptions().dtype(torch::kUInt8).device(a.device());
-  auto workspace = torch::empty(workspace_size, workspace_options);
-  const cudaStream_t stream = at::cuda::getCurrentCUDAStream(a.get_device());
+  auto workspace =
+      torch::stable::empty(workspace_size, torch::headeronly::ScalarType::Byte,
+                           std::nullopt, a.device());
+  const cudaStream_t stream = get_current_cuda_stream(a.get_device_index());
 
   auto can_implement_status = gemm_op.can_implement(args);
-  TORCH_CHECK(can_implement_status == cutlass::Status::kSuccess,
-              "Failed to implement GEMM: status=", (int)can_implement_status);
+  STD_TORCH_CHECK(
+      can_implement_status == cutlass::Status::kSuccess,
+      "Failed to implement GEMM: status=", (int)can_implement_status);
 
   // Run the GEMM
   auto status = gemm_op.initialize(args, workspace.data_ptr());
-  TORCH_CHECK(status == cutlass::Status::kSuccess,
-              "Failed to initialize GEMM: status=", (int)status,
-              " workspace_size=", workspace_size, " num_experts=", num_experts,
-              " M=", M, " N=", N, " K=", K);
+  STD_TORCH_CHECK(status == cutlass::Status::kSuccess,
+                  "Failed to initialize GEMM: status=", (int)status,
+                  " workspace_size=", workspace_size,
+                  " num_experts=", num_experts, " M=", M, " N=", N, " K=", K);
 
   status = gemm_op.run(args, workspace.data_ptr(), stream);
-  TORCH_CHECK(status == cutlass::Status::kSuccess, "Failed to run GEMM");
+  STD_TORCH_CHECK(status == cutlass::Status::kSuccess, "Failed to run GEMM");
 }
 
 template <typename OutType>
 void run_fp4_blockwise_scaled_group_mm(
-    torch::Tensor& output, const torch::Tensor& a, const torch::Tensor& b,
-    const torch::Tensor& a_blockscale, const torch::Tensor& b_blockscales,
-    const torch::Tensor& alphas, const torch::Tensor& problem_sizes,
-    const torch::Tensor& expert_offsets, const torch::Tensor& sf_offsets, int M,
-    int N, int K) {
+    torch::stable::Tensor& output, const torch::stable::Tensor& a,
+    const torch::stable::Tensor& b, const torch::stable::Tensor& a_blockscale,
+    const torch::stable::Tensor& b_blockscales,
+    const torch::stable::Tensor& alphas,
+    const torch::stable::Tensor& problem_sizes,
+    const torch::stable::Tensor& expert_offsets,
+    const torch::stable::Tensor& sf_offsets, int M, int N, int K) {
   int32_t version_num = get_sm_version_num();
 #if defined ENABLE_NVFP4_SM120 && ENABLE_NVFP4_SM120
   if (version_num >= 120 && version_num < 130) {
@@ -567,7 +625,7 @@ void run_fp4_blockwise_scaled_group_mm(
     return;
   }
 #endif
-  TORCH_CHECK_NOT_IMPLEMENTED(
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
       false,
       "No compiled cutlass_fp4_group_mm kernel for CUDA device capability: ",
       version_num, ". Required capability: 100 or 120");
@@ -575,26 +633,31 @@ void run_fp4_blockwise_scaled_group_mm(
 
 #if (defined ENABLE_NVFP4_SM100 && ENABLE_NVFP4_SM100) || \
     (defined ENABLE_NVFP4_SM120 && ENABLE_NVFP4_SM120)
-constexpr auto FLOAT4_E2M1X2 = at::ScalarType::Byte;
-constexpr auto SF_DTYPE = at::ScalarType::Float8_e4m3fn;
+constexpr auto FLOAT4_E2M1X2 = torch::headeronly::ScalarType::Byte;
+constexpr auto SF_DTYPE = torch::headeronly::ScalarType::Float8_e4m3fn;
 #endif
 
-#define CHECK_TYPE(x, st, m) \
-  TORCH_CHECK(x.scalar_type() == st, ": Inconsistency of Tensor type:", m)
+#define CHECK_TYPE(x, st, m)             \
+  STD_TORCH_CHECK(x.scalar_type() == st, \
+                  ": Inconsistency of torch::stable::Tensor type:", m)
 #define CHECK_TH_CUDA(x, m) \
-  TORCH_CHECK(x.is_cuda(), m, ": must be a CUDA tensor.")
+  STD_TORCH_CHECK(x.is_cuda(), m, ": must be a CUDA tensor.")
 #define CHECK_CONTIGUOUS(x, m) \
-  TORCH_CHECK(x.is_contiguous(), m, ": must be contiguous.")
+  STD_TORCH_CHECK(x.is_contiguous(), m, ": must be contiguous.")
 #define CHECK_INPUT(x, st, m) \
   CHECK_TH_CUDA(x, m);        \
   CHECK_CONTIGUOUS(x, m);     \
   CHECK_TYPE(x, st, m)
 
-void cutlass_fp4_group_mm(
-    torch::Tensor& output, const torch::Tensor& a, const torch::Tensor& b,
-    const torch::Tensor& a_blockscale, const torch::Tensor& b_blockscales,
-    const torch::Tensor& alphas, const torch::Tensor& problem_sizes,
-    const torch::Tensor& expert_offsets, const torch::Tensor& sf_offsets) {
+void cutlass_fp4_group_mm(torch::stable::Tensor& output,
+                          const torch::stable::Tensor& a,
+                          const torch::stable::Tensor& b,
+                          const torch::stable::Tensor& a_blockscale,
+                          const torch::stable::Tensor& b_blockscales,
+                          const torch::stable::Tensor& alphas,
+                          const torch::stable::Tensor& problem_sizes,
+                          const torch::stable::Tensor& expert_offsets,
+                          const torch::stable::Tensor& sf_offsets) {
 #if (defined ENABLE_NVFP4_SM100 && ENABLE_NVFP4_SM100) || \
     (defined ENABLE_NVFP4_SM120 && ENABLE_NVFP4_SM120)
   // Input validation
@@ -602,30 +665,34 @@ void cutlass_fp4_group_mm(
   CHECK_INPUT(b, FLOAT4_E2M1X2, "b");
   CHECK_INPUT(a_blockscale, SF_DTYPE, "a_blockscale");
   CHECK_INPUT(b_blockscales, SF_DTYPE, "b_blockscales");
-  CHECK_INPUT(alphas, at::ScalarType::Float, "alphas");
+  CHECK_INPUT(alphas, torch::headeronly::ScalarType::Float, "alphas");
 
-  TORCH_CHECK(a_blockscale.dim() == 2,
-              "expected a_blockscale to be of shape [num_experts, rounded_m,"
-              " k // group_size], observed rank: ",
-              a_blockscale.dim())
-  TORCH_CHECK(b_blockscales.dim() == 3,
-              "expected b_blockscale to be of shape: "
-              " [num_experts, n, k // group_size], observed rank: ",
-              b_blockscales.dim())
-  TORCH_CHECK(problem_sizes.dim() == 2, "problem_sizes must be  a 2D tensor");
-  TORCH_CHECK(problem_sizes.size(1) == 3,
-              "problem_sizes must have the shape (num_experts, 3)");
-  TORCH_CHECK(problem_sizes.size(0) == expert_offsets.size(0),
-              "Number of experts in problem_sizes must match expert_offsets");
-  TORCH_CHECK(problem_sizes.dtype() == torch::kInt32,
-              "problem_sizes must be int32.");
+  STD_TORCH_CHECK(
+      a_blockscale.dim() == 2,
+      "expected a_blockscale to be of shape [num_experts, rounded_m,"
+      " k // group_size], observed rank: ",
+      a_blockscale.dim())
+  STD_TORCH_CHECK(b_blockscales.dim() == 3,
+                  "expected b_blockscale to be of shape: "
+                  " [num_experts, n, k // group_size], observed rank: ",
+                  b_blockscales.dim())
+  STD_TORCH_CHECK(problem_sizes.dim() == 2,
+                  "problem_sizes must be  a 2D tensor");
+  STD_TORCH_CHECK(problem_sizes.size(1) == 3,
+                  "problem_sizes must have the shape (num_experts, 3)");
+  STD_TORCH_CHECK(
+      problem_sizes.size(0) == expert_offsets.size(0),
+      "Number of experts in problem_sizes must match expert_offsets");
+  STD_TORCH_CHECK(
+      problem_sizes.scalar_type() == torch::headeronly::ScalarType::Int,
+      "problem_sizes must be int32.");
 
   int M = static_cast<int>(a.size(0));
   int N = static_cast<int>(b.size(1));
   int E = static_cast<int>(b.size(0));
   int K = static_cast<int>(2 * b.size(2));
 
-  if (output.scalar_type() == torch::kBFloat16) {
+  if (output.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
     run_fp4_blockwise_scaled_group_mm<cutlass::bfloat16_t>(
         output, a, b, a_blockscale, b_blockscales, alphas, problem_sizes,
         expert_offsets, sf_offsets, M, N, K);
@@ -633,7 +700,7 @@ void cutlass_fp4_group_mm(
   #if defined ENABLE_NVFP4_SM120 && ENABLE_NVFP4_SM120
     int32_t version_num = get_sm_version_num();
     if (version_num >= 120 && version_num < 130) {
-      TORCH_CHECK_NOT_IMPLEMENTED(
+      STD_TORCH_CHECK_NOT_IMPLEMENTED(
           false, "SM120 NVFP4 MOE only supports bfloat16 output, got: ",
           output.scalar_type());
     }
@@ -643,7 +710,7 @@ void cutlass_fp4_group_mm(
         expert_offsets, sf_offsets, M, N, K);
   }
 #else
-  TORCH_CHECK_NOT_IMPLEMENTED(
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
       false,
       "No compiled cutlass_fp4_group_mm kernel, vLLM must "
       "be compiled with ENABLE_NVFP4_SM100 or ENABLE_NVFP4_SM120 for SM100/120 "
@@ -651,6 +718,6 @@ void cutlass_fp4_group_mm(
 #endif
 }
 
-TORCH_LIBRARY_IMPL_EXPAND(TORCH_EXTENSION_NAME, CUDA, m) {
-  m.impl("cutlass_fp4_group_mm", &cutlass_fp4_group_mm);
+STABLE_TORCH_LIBRARY_IMPL(_C, CUDA, m) {
+  m.impl("cutlass_fp4_group_mm", TORCH_BOX(&cutlass_fp4_group_mm));
 }

csrc/libtorch_stable/quantization/fp4/nvfp4_experts_quant.cu

@@ -14,16 +14,15 @@
  * limitations under the License.
  */
 
-#include <torch/all.h>
+#include <torch/csrc/stable/tensor.h>
+#include "libtorch_stable/torch_utils.h"
+#include "libtorch_stable/dispatch_utils.h"
+#include "cuda_vec_utils.cuh"
 
 #include <cuda_runtime_api.h>
 #include <cuda_runtime.h>
 
-#include <ATen/cuda/CUDAContext.h>
-#include <c10/cuda/CUDAGuard.h>
-
 #include <cuda_fp8.h>
-#include "dispatch_utils.h"
 
 #include "cuda_utils.h"
 #include "nvfp4_utils.cuh"
@@ -327,25 +326,28 @@ void quant_impl(void* output, void* output_scale, void* input,
 }  // namespace vllm
 
 /*Quantization entry for fp4 experts quantization*/
-#define CHECK_TH_CUDA(x, m) TORCH_CHECK(x.is_cuda(), m, "must be a CUDA tensor")
+#define CHECK_TH_CUDA(x, m) \
+  STD_TORCH_CHECK(x.is_cuda(), m, "must be a CUDA tensor")
 #define CHECK_CONTIGUOUS(x, m) \
-  TORCH_CHECK(x.is_contiguous(), m, "must be contiguous")
+  STD_TORCH_CHECK(x.is_contiguous(), m, "must be contiguous")
 #define CHECK_INPUT(x, m) \
   CHECK_TH_CUDA(x, m);    \
   CHECK_CONTIGUOUS(x, m);
 
-constexpr auto HALF = at::ScalarType::Half;
-constexpr auto BF16 = at::ScalarType::BFloat16;
-constexpr auto FLOAT = at::ScalarType::Float;
-constexpr auto INT = at::ScalarType::Int;
-constexpr auto UINT8 = at::ScalarType::Byte;
+constexpr auto HALF = torch::headeronly::ScalarType::Half;
+constexpr auto BF16 = torch::headeronly::ScalarType::BFloat16;
+constexpr auto FLOAT = torch::headeronly::ScalarType::Float;
+constexpr auto INT = torch::headeronly::ScalarType::Int;
+constexpr auto UINT8 = torch::headeronly::ScalarType::Byte;
 
 // Common validation for fp4 experts quantization entry points.
 static void validate_fp4_experts_quant_inputs(
-    torch::Tensor const& output, torch::Tensor const& output_scale,
-    torch::Tensor const& input, torch::Tensor const& input_global_scale,
-    torch::Tensor const& input_offset_by_experts,
-    torch::Tensor const& output_scale_offset_by_experts, int64_t m_topk,
+    torch::stable::Tensor const& output,
+    torch::stable::Tensor const& output_scale,
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_global_scale,
+    torch::stable::Tensor const& input_offset_by_experts,
+    torch::stable::Tensor const& output_scale_offset_by_experts, int64_t m_topk,
     int64_t k) {
   CHECK_INPUT(output, "output");
   CHECK_INPUT(output_scale, "output_scale");
@@ -354,41 +356,42 @@ static void validate_fp4_experts_quant_inputs(
   CHECK_INPUT(input_offset_by_experts, "input_offset_by_experts");
   CHECK_INPUT(output_scale_offset_by_experts, "output_scale_offset_by_experts");
 
-  TORCH_CHECK(output.dim() == 2);
-  TORCH_CHECK(output_scale.dim() == 2);
-  TORCH_CHECK(input.dim() == 2);
-  TORCH_CHECK(input_global_scale.dim() == 1);
-  TORCH_CHECK(input_offset_by_experts.dim() == 1);
-  TORCH_CHECK(output_scale_offset_by_experts.dim() == 1);
+  STD_TORCH_CHECK(output.dim() == 2);
+  STD_TORCH_CHECK(output_scale.dim() == 2);
+  STD_TORCH_CHECK(input.dim() == 2);
+  STD_TORCH_CHECK(input_global_scale.dim() == 1);
+  STD_TORCH_CHECK(input_offset_by_experts.dim() == 1);
+  STD_TORCH_CHECK(output_scale_offset_by_experts.dim() == 1);
 
-  TORCH_CHECK(input.scalar_type() == HALF || input.scalar_type() == BF16);
-  TORCH_CHECK(input_global_scale.scalar_type() == FLOAT);
-  TORCH_CHECK(input_offset_by_experts.scalar_type() == INT);
-  TORCH_CHECK(output_scale_offset_by_experts.scalar_type() == INT);
+  STD_TORCH_CHECK(input.scalar_type() == HALF || input.scalar_type() == BF16);
+  STD_TORCH_CHECK(input_global_scale.scalar_type() == FLOAT);
+  STD_TORCH_CHECK(input_offset_by_experts.scalar_type() == INT);
+  STD_TORCH_CHECK(output_scale_offset_by_experts.scalar_type() == INT);
   // output is uint8 (two nvfp4 values are packed into one uint8)
   // output_scale is int32 (four fp8 values are packed into one int32)
-  TORCH_CHECK(output.scalar_type() == UINT8);
-  TORCH_CHECK(output_scale.scalar_type() == INT);
+  STD_TORCH_CHECK(output.scalar_type() == UINT8);
+  STD_TORCH_CHECK(output_scale.scalar_type() == INT);
 
   const int BLOCK_SIZE = 16;
-  TORCH_CHECK(k % BLOCK_SIZE == 0, "k must be a multiple of 16");
+  STD_TORCH_CHECK(k % BLOCK_SIZE == 0, "k must be a multiple of 16");
   auto n_experts = input_global_scale.size(0);
-  TORCH_CHECK(input_offset_by_experts.size(0) == n_experts + 1);
-  TORCH_CHECK(output_scale_offset_by_experts.size(0) == n_experts + 1);
-  TORCH_CHECK(output.size(0) == m_topk);
-  TORCH_CHECK(output.size(1) == k / 2);
+  STD_TORCH_CHECK(input_offset_by_experts.size(0) == n_experts + 1);
+  STD_TORCH_CHECK(output_scale_offset_by_experts.size(0) == n_experts + 1);
+  STD_TORCH_CHECK(output.size(0) == m_topk);
+  STD_TORCH_CHECK(output.size(1) == k / 2);
   int scales_k = k / BLOCK_SIZE;
   // 4 means the swizzle requirement by nvidia nvfp4.
   int padded_k = (scales_k + (4 - 1)) / 4 * 4;
   // 4 means 4 fp8 values are packed into one int32
-  TORCH_CHECK(output_scale.size(1) * 4 == padded_k);
+  STD_TORCH_CHECK(output_scale.size(1) * 4 == padded_k);
 }
 
 void scaled_fp4_experts_quant_sm1xxa(
-    torch::Tensor& output, torch::Tensor& output_scale,
-    torch::Tensor const& input, torch::Tensor const& input_global_scale,
-    torch::Tensor const& input_offset_by_experts,
-    torch::Tensor const& output_scale_offset_by_experts) {
+    torch::stable::Tensor& output, torch::stable::Tensor& output_scale,
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_global_scale,
+    torch::stable::Tensor const& input_offset_by_experts,
+    torch::stable::Tensor const& output_scale_offset_by_experts) {
   auto m_topk = input.size(0);
   auto k = input.size(1);
 
@@ -397,11 +400,11 @@ void scaled_fp4_experts_quant_sm1xxa(
                                     output_scale_offset_by_experts, m_topk, k);
 
   auto n_experts = input_global_scale.size(0);
-  const at::cuda::OptionalCUDAGuard device_guard(device_of(input));
-  const cudaStream_t stream =
-      at::cuda::getCurrentCUDAStream(input.get_device());
+  const torch::stable::accelerator::DeviceGuard device_guard(
+      input.get_device_index());
+  const cudaStream_t stream = get_current_cuda_stream(input.get_device_index());
 
-  VLLM_DISPATCH_HALF_TYPES(
+  VLLM_STABLE_DISPATCH_HALF_TYPES(
       input.scalar_type(), "nvfp4_experts_quant_kernel", [&] {
         using cuda_type = vllm::CUDATypeConverter<scalar_t>::Type;
         vllm::quant_impl<cuda_type, /*FUSE_SILU_MUL=*/false>(
@@ -413,14 +416,15 @@ void scaled_fp4_experts_quant_sm1xxa(
 }
 
 void silu_and_mul_scaled_fp4_experts_quant_sm1xxa(
-    torch::Tensor& output, torch::Tensor& output_scale,
-    torch::Tensor const& input, torch::Tensor const& input_global_scale,
-    torch::Tensor const& input_offset_by_experts,
-    torch::Tensor const& output_scale_offset_by_experts) {
+    torch::stable::Tensor& output, torch::stable::Tensor& output_scale,
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_global_scale,
+    torch::stable::Tensor const& input_offset_by_experts,
+    torch::stable::Tensor const& output_scale_offset_by_experts) {
   auto m_topk = input.size(0);
   // Input has gate || up layout, so k = input.size(1) / 2
   auto k_times_2 = input.size(1);
-  TORCH_CHECK(k_times_2 % 2 == 0, "input width must be even (gate || up)");
+  STD_TORCH_CHECK(k_times_2 % 2 == 0, "input width must be even (gate || up)");
   auto k = k_times_2 / 2;
 
   validate_fp4_experts_quant_inputs(output, output_scale, input,
@@ -428,11 +432,11 @@ void silu_and_mul_scaled_fp4_experts_quant_sm1xxa(
                                     output_scale_offset_by_experts, m_topk, k);
 
   auto n_experts = input_global_scale.size(0);
-  const at::cuda::OptionalCUDAGuard device_guard(device_of(input));
-  const cudaStream_t stream =
-      at::cuda::getCurrentCUDAStream(input.get_device());
+  const torch::stable::accelerator::DeviceGuard device_guard(
+      input.get_device_index());
+  const cudaStream_t stream = get_current_cuda_stream(input.get_device_index());
 
-  VLLM_DISPATCH_HALF_TYPES(
+  VLLM_STABLE_DISPATCH_HALF_TYPES(
       input.scalar_type(), "silu_mul_nvfp4_experts_quant_kernel", [&] {
         using cuda_type = vllm::CUDATypeConverter<scalar_t>::Type;
         vllm::quant_impl<cuda_type, /*FUSE_SILU_MUL=*/true>(

csrc/libtorch_stable/quantization/fp4/nvfp4_quant_entry.cu

@@ -0,0 +1,172 @@
+/*
+ * Copyright (c) 2025, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <torch/csrc/stable/tensor.h>
+
+#include "libtorch_stable/torch_utils.h"
+
+#include "cutlass_extensions/common.hpp"
+#include "nvfp4_utils.cuh"
+
+#if (defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100) || \
+    (defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120)
+void scaled_fp4_quant_sm1xxa(torch::stable::Tensor const& output,
+                             torch::stable::Tensor const& input,
+                             torch::stable::Tensor const& output_sf,
+                             torch::stable::Tensor const& input_sf,
+                             bool is_sf_swizzled_layout);
+#endif
+
+#if (defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100) || \
+    (defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120)
+void scaled_fp4_experts_quant_sm1xxa(
+    torch::stable::Tensor& output, torch::stable::Tensor& output_scale,
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_global_scale,
+    torch::stable::Tensor const& input_offset_by_experts,
+    torch::stable::Tensor const& output_scale_offset_by_experts);
+#endif
+
+#if (defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100) || \
+    (defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120)
+void silu_and_mul_nvfp4_quant_sm1xxa(torch::stable::Tensor& output,
+                                     torch::stable::Tensor& output_sf,
+                                     torch::stable::Tensor& input,
+                                     torch::stable::Tensor& input_sf);
+#endif
+
+#if (defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100) || \
+    (defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120)
+void silu_and_mul_scaled_fp4_experts_quant_sm1xxa(
+    torch::stable::Tensor& output, torch::stable::Tensor& output_scale,
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_global_scale,
+    torch::stable::Tensor const& input_offset_by_experts,
+    torch::stable::Tensor const& output_scale_offset_by_experts);
+#endif
+
+static bool nvfp4_quant_sm_supported() {
+  const int32_t sm = get_sm_version_num();
+#if defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100
+  if (sm >= 100 && sm < 120) return true;
+#endif
+#if defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120
+  if (sm >= 120 && sm < 130) return true;
+#endif
+  return false;
+}
+
+void scaled_fp4_quant_out(torch::stable::Tensor const& input,
+                          torch::stable::Tensor const& input_sf,
+                          bool is_sf_swizzled_layout,
+                          torch::stable::Tensor& output,
+                          torch::stable::Tensor& output_sf) {
+#if (defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100) || \
+    (defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120)
+  STD_TORCH_CHECK(nvfp4_quant_sm_supported(),
+                  "No compiled nvfp4 quantization kernel for SM ",
+                  get_sm_version_num(),
+                  ". Recompile with the appropriate CUDA arch.");
+  return scaled_fp4_quant_sm1xxa(output, input, output_sf, input_sf,
+                                 is_sf_swizzled_layout);
+#endif
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(false,
+                                  "No compiled nvfp4 quantization kernel");
+}
+
+std::tuple<torch::stable::Tensor, torch::stable::Tensor> scaled_fp4_quant_func(
+    torch::stable::Tensor const& input, torch::stable::Tensor const& input_sf,
+    bool is_sf_swizzled_layout) {
+  int64_t n = input.size(-1);
+  int64_t m = input.numel() / n;
+  auto device = input.device();
+
+  // Two fp4 values packed into a uint8
+  auto output = torch::stable::empty(
+      {m, n / 2}, torch::headeronly::ScalarType::Byte, std::nullopt, device);
+
+  torch::stable::Tensor output_sf;
+  if (is_sf_swizzled_layout) {
+    auto [sf_m, sf_n] = vllm::computeSwizzledSFShape(m, n);
+    output_sf = torch::stable::empty(
+        {sf_m, sf_n}, torch::headeronly::ScalarType::Int, std::nullopt, device);
+  } else {
+    output_sf = torch::stable::empty({m, n / CVT_FP4_SF_VEC_SIZE},
+                                     torch::headeronly::ScalarType::Byte,
+                                     std::nullopt, device);
+  }
+
+  scaled_fp4_quant_out(input, input_sf, is_sf_swizzled_layout, output,
+                       output_sf);
+  return {output, output_sf};
+}
+
+void scaled_fp4_experts_quant(
+    torch::stable::Tensor& output, torch::stable::Tensor& output_scale,
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_global_scale,
+    torch::stable::Tensor const& input_offset_by_experts,
+    torch::stable::Tensor const& output_scale_offset_by_experts) {
+#if (defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100) || \
+    (defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120)
+  STD_TORCH_CHECK(nvfp4_quant_sm_supported(),
+                  "No compiled nvfp4 experts quantization kernel for SM ",
+                  get_sm_version_num(),
+                  ". Recompile with the appropriate CUDA arch.");
+  return scaled_fp4_experts_quant_sm1xxa(
+      output, output_scale, input, input_global_scale, input_offset_by_experts,
+      output_scale_offset_by_experts);
+#endif
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false, "No compiled nvfp4 experts quantization kernel");
+}
+
+void silu_and_mul_nvfp4_quant(torch::stable::Tensor& output,
+                              torch::stable::Tensor& output_sf,
+                              torch::stable::Tensor& input,
+                              torch::stable::Tensor& input_sf) {
+#if (defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100) || \
+    (defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120)
+  STD_TORCH_CHECK(nvfp4_quant_sm_supported(),
+                  "No compiled silu_and_mul nvfp4 quantization kernel for SM ",
+                  get_sm_version_num(),
+                  ". Recompile with the appropriate CUDA arch.");
+  return silu_and_mul_nvfp4_quant_sm1xxa(output, output_sf, input, input_sf);
+#endif
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false, "No compiled silu_and_mul nvfp4 quantization kernel");
+}
+
+void silu_and_mul_scaled_fp4_experts_quant(
+    torch::stable::Tensor& output, torch::stable::Tensor& output_scale,
+    torch::stable::Tensor const& input,
+    torch::stable::Tensor const& input_global_scale,
+    torch::stable::Tensor const& input_offset_by_experts,
+    torch::stable::Tensor const& output_scale_offset_by_experts) {
+#if (defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100) || \
+    (defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120)
+  STD_TORCH_CHECK(nvfp4_quant_sm_supported(),
+                  "No compiled silu_and_mul nvfp4 experts quantization kernel "
+                  "for SM ",
+                  get_sm_version_num(),
+                  ". Recompile with the appropriate CUDA arch.");
+  return silu_and_mul_scaled_fp4_experts_quant_sm1xxa(
+      output, output_scale, input, input_global_scale, input_offset_by_experts,
+      output_scale_offset_by_experts);
+#endif
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false, "No compiled silu_and_mul nvfp4 experts quantization kernel");
+}

csrc/libtorch_stable/quantization/fp4/nvfp4_quant_kernels.cu

@@ -14,16 +14,16 @@
  * limitations under the License.
  */
 
-#include <torch/all.h>
+#include <torch/csrc/stable/tensor.h>
 
 #include <cuda_runtime_api.h>
 #include <cuda_runtime.h>
 
-#include <ATen/cuda/CUDAContext.h>
-#include <c10/cuda/CUDAGuard.h>
-
 #include <cuda_fp8.h>
-#include "dispatch_utils.h"
+
+#include "libtorch_stable/torch_utils.h"
+#include "libtorch_stable/dispatch_utils.h"
+#include "cuda_vec_utils.cuh"
 
 #include "cuda_utils.h"
 #include "launch_bounds_utils.h"
@@ -173,18 +173,19 @@ __global__ void __launch_bounds__(512, VLLM_BLOCKS_PER_SM(512))
 
 }  // namespace vllm
 
-void scaled_fp4_quant_sm1xxa(torch::Tensor const& output,
-                             torch::Tensor const& input,
-                             torch::Tensor const& output_sf,
-                             torch::Tensor const& input_sf,
+void scaled_fp4_quant_sm1xxa(torch::stable::Tensor const& output,
+                             torch::stable::Tensor const& input,
+                             torch::stable::Tensor const& output_sf,
+                             torch::stable::Tensor const& input_sf,
                              bool is_sf_swizzled_layout) {
   int32_t m = input.size(0);
   int32_t n = input.size(1);
 
-  TORCH_CHECK(n % 16 == 0, "The N dimension must be multiple of 16.");
-  TORCH_CHECK(input.scalar_type() == at::ScalarType::Half ||
-                  input.scalar_type() == at::ScalarType::BFloat16,
-              "Unsupported input data type for quantize_to_fp4.");
+  STD_TORCH_CHECK(n % 16 == 0, "The N dimension must be multiple of 16.");
+  STD_TORCH_CHECK(
+      input.scalar_type() == torch::headeronly::ScalarType::Half ||
+          input.scalar_type() == torch::headeronly::ScalarType::BFloat16,
+      "Unsupported input data type for quantize_to_fp4.");
 
   int multiProcessorCount =
       get_device_attribute(cudaDevAttrMultiProcessorCount, -1);
@@ -192,8 +193,9 @@ void scaled_fp4_quant_sm1xxa(torch::Tensor const& output,
   auto input_sf_ptr = static_cast<float const*>(input_sf.data_ptr());
   auto sf_out = static_cast<int32_t*>(output_sf.data_ptr());
   auto output_ptr = static_cast<int64_t*>(output.data_ptr());
-  const at::cuda::OptionalCUDAGuard device_guard(device_of(input));
-  auto stream = at::cuda::getCurrentCUDAStream(input.get_device());
+  const torch::stable::accelerator::DeviceGuard device_guard(
+      input.get_device_index());
+  auto stream = get_current_cuda_stream(input.get_device_index());
 
   int sf_n_unpadded = int(n / CVT_FP4_SF_VEC_SIZE);
 
@@ -213,15 +215,15 @@ void scaled_fp4_quant_sm1xxa(torch::Tensor const& output,
                  std::max(1, (multiProcessorCount * numBlocksPerSM) / grid_y));
     dim3 grid(grid_x, grid_y);
 
-    VLLM_DISPATCH_HALF_TYPES(input.scalar_type(), "nvfp4_quant_kernel", [&] {
-      using cuda_type = vllm::CUDATypeConverter<scalar_t>::Type;
-      auto input_ptr = static_cast<cuda_type const*>(input.data_ptr());
-      // NOTE: We don't support e8m0 scales at this moment.
-      vllm::cvt_fp16_to_fp4<cuda_type, false><<<grid, block, 0, stream>>>(
-          m, n, num_padded_cols, input_ptr, input_sf_ptr,
-          reinterpret_cast<uint32_t*>(output_ptr),
-          reinterpret_cast<uint32_t*>(sf_out));
-    });
+    VLLM_STABLE_DISPATCH_HALF_TYPES(
+        input.scalar_type(), "nvfp4_quant_kernel", [&] {
+          using cuda_type = vllm::CUDATypeConverter<scalar_t>::Type;
+          auto input_ptr = static_cast<cuda_type const*>(input.data_ptr());
+          vllm::cvt_fp16_to_fp4<cuda_type, false><<<grid, block, 0, stream>>>(
+              m, n, num_padded_cols, input_ptr, input_sf_ptr,
+              reinterpret_cast<uint32_t*>(output_ptr),
+              reinterpret_cast<uint32_t*>(sf_out));
+        });
   } else {
     int num_packed_cols = n / CVT_FP4_ELTS_PER_THREAD;
     int grid_y = vllm::div_round_up(num_packed_cols, static_cast<int>(block.x));
@@ -229,15 +231,15 @@ void scaled_fp4_quant_sm1xxa(torch::Tensor const& output,
         m, std::max(1, (multiProcessorCount * numBlocksPerSM) / grid_y));
     dim3 grid(grid_x, grid_y);
 
-    VLLM_DISPATCH_HALF_TYPES(input.scalar_type(), "nvfp4_quant_kernel", [&] {
-      using cuda_type = vllm::CUDATypeConverter<scalar_t>::Type;
-      auto input_ptr = static_cast<cuda_type const*>(input.data_ptr());
-      // NOTE: We don't support e8m0 scales at this moment.
-      vllm::cvt_fp16_to_fp4_sf_major<cuda_type, false>
-          <<<grid, block, 0, stream>>>(m, n, sf_n_unpadded, num_packed_cols,
-                                       input_ptr, input_sf_ptr,
-                                       reinterpret_cast<uint32_t*>(output_ptr),
-                                       reinterpret_cast<uint32_t*>(sf_out));
-    });
+    VLLM_STABLE_DISPATCH_HALF_TYPES(
+        input.scalar_type(), "nvfp4_quant_kernel", [&] {
+          using cuda_type = vllm::CUDATypeConverter<scalar_t>::Type;
+          auto input_ptr = static_cast<cuda_type const*>(input.data_ptr());
+          vllm::cvt_fp16_to_fp4_sf_major<cuda_type, false>
+              <<<grid, block, 0, stream>>>(
+                  m, n, sf_n_unpadded, num_packed_cols, input_ptr, input_sf_ptr,
+                  reinterpret_cast<uint32_t*>(output_ptr),
+                  reinterpret_cast<uint32_t*>(sf_out));
+        });
   }
 }

csrc/libtorch_stable/quantization/fp4/nvfp4_scaled_mm_entry.cu

@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2025, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <torch/csrc/stable/tensor.h>
+
+#include "libtorch_stable/torch_utils.h"
+
+#include "cutlass_extensions/common.hpp"
+
+#if defined ENABLE_NVFP4_SM100 && ENABLE_NVFP4_SM100
+void cutlass_scaled_fp4_mm_sm100a(torch::stable::Tensor& D,
+                                  torch::stable::Tensor const& A,
+                                  torch::stable::Tensor const& B,
+                                  torch::stable::Tensor const& A_sf,
+                                  torch::stable::Tensor const& B_sf,
+                                  torch::stable::Tensor const& alpha);
+#endif
+
+#if defined ENABLE_NVFP4_SM120 && ENABLE_NVFP4_SM120
+void cutlass_scaled_fp4_mm_sm120a(torch::stable::Tensor& D,
+                                  torch::stable::Tensor const& A,
+                                  torch::stable::Tensor const& B,
+                                  torch::stable::Tensor const& A_sf,
+                                  torch::stable::Tensor const& B_sf,
+                                  torch::stable::Tensor const& alpha);
+#endif
+
+void cutlass_scaled_fp4_mm(torch::stable::Tensor& D,
+                           const torch::stable::Tensor& A,
+                           const torch::stable::Tensor& B,
+                           const torch::stable::Tensor& A_sf,
+                           const torch::stable::Tensor& B_sf,
+                           const torch::stable::Tensor& alpha) {
+  // Make sure we're on A's device.
+  const torch::stable::accelerator::DeviceGuard device_guard(
+      A.get_device_index());
+  const int32_t sm = get_sm_version_num();
+
+#if defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100
+  if (sm >= 100 && sm < 120) {
+    cutlass_scaled_fp4_mm_sm100a(D, A, B, A_sf, B_sf, alpha);
+    return;
+  }
+#endif
+
+#if defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120
+  if (sm >= 120 && sm < 130) {
+    cutlass_scaled_fp4_mm_sm120a(D, A, B, A_sf, B_sf, alpha);
+    return;
+  }
+#endif
+
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false, "No compiled nvfp4 mm kernel for SM ", sm,
+      ". Recompile with CUDA >= 12.8 and CC >= 100.");
+}
+
+bool cutlass_scaled_mm_supports_fp4(int64_t cuda_device_capability) {
+  int runtimeVersion;
+  cudaRuntimeGetVersion(&runtimeVersion);
+  if (runtimeVersion < 12080) return false;
+  // Only report support when the SM-specific kernel was actually compiled in,
+  // so the Python-side backend selector does not choose CUTLASS and then hit
+  // TORCH_CHECK_NOT_IMPLEMENTED (or worse, fall through to Marlin).
+#if defined(ENABLE_NVFP4_SM100) && ENABLE_NVFP4_SM100
+  if (cuda_device_capability >= 100 && cuda_device_capability < 120)
+    return true;
+#endif
+#if defined(ENABLE_NVFP4_SM120) && ENABLE_NVFP4_SM120
+  if (cuda_device_capability >= 120 && cuda_device_capability < 130)
+    return true;
+#endif
+  return false;
+}

csrc/libtorch_stable/quantization/fp4/nvfp4_scaled_mm_kernels.cu

@@ -14,10 +14,9 @@
  * limitations under the License.
  */
 
-#include <torch/all.h>
+#include <torch/csrc/stable/tensor.h>
 
-#include <ATen/cuda/CUDAContext.h>
-#include <c10/cuda/CUDAGuard.h>
+#include "libtorch_stable/torch_utils.h"
 
 #include "cutlass_extensions/common.hpp"
 
@@ -127,8 +126,9 @@ struct Fp4GemmSm100 {
 
 template <typename Config>
 typename Config::Gemm::Arguments args_from_options(
-    at::Tensor& D, at::Tensor const& A, at::Tensor const& B,
-    at::Tensor const& A_sf, at::Tensor const& B_sf, at::Tensor const& alpha,
+    torch::stable::Tensor& D, torch::stable::Tensor const& A,
+    torch::stable::Tensor const& B, torch::stable::Tensor const& A_sf,
+    torch::stable::Tensor const& B_sf, torch::stable::Tensor const& alpha,
     int64_t M, int64_t N, int64_t K) {
   using ElementA = typename Config::Gemm::ElementA;
   using ElementB = typename Config::Gemm::ElementB;
@@ -174,19 +174,20 @@ typename Config::Gemm::Arguments args_from_options(
 }
 
 template <typename Config>
-void runGemm(at::Tensor& D, at::Tensor const& A, at::Tensor const& B,
-             at::Tensor const& A_sf, at::Tensor const& B_sf,
-             at::Tensor const& alpha, int64_t m, int64_t n, int64_t k,
-             cudaStream_t stream) {
+void runGemm(torch::stable::Tensor& D, torch::stable::Tensor const& A,
+             torch::stable::Tensor const& B, torch::stable::Tensor const& A_sf,
+             torch::stable::Tensor const& B_sf,
+             torch::stable::Tensor const& alpha, int64_t m, int64_t n,
+             int64_t k, cudaStream_t stream) {
   typename Config::Gemm gemm;
 
   auto arguments =
       args_from_options<Config>(D, A, B, A_sf, B_sf, alpha, m, n, k);
 
   size_t workspace_size = Config::Gemm::get_workspace_size(arguments);
-  auto const workspace_options =
-      torch::TensorOptions().dtype(torch::kUInt8).device(A.device());
-  auto workspace = torch::empty(workspace_size, workspace_options);
+  auto workspace =
+      torch::stable::empty(workspace_size, torch::headeronly::ScalarType::Byte,
+                           std::nullopt, A.device());
 
   CUTLASS_CHECK(gemm.can_implement(arguments));
 
@@ -197,12 +198,13 @@ void runGemm(at::Tensor& D, at::Tensor const& A, at::Tensor const& B,
 
 // Dispatch function to select appropriate config based on M
 template <typename OutType>
-void cutlass_fp4_gemm_dispatch(torch::Tensor& D, torch::Tensor const& A,
-                               torch::Tensor const& B,
-                               torch::Tensor const& A_sf,
-                               torch::Tensor const& B_sf,
-                               torch::Tensor const& alpha, int64_t m, int64_t n,
-                               int64_t k, cudaStream_t stream) {
+void cutlass_fp4_gemm_dispatch(torch::stable::Tensor& D,
+                               torch::stable::Tensor const& A,
+                               torch::stable::Tensor const& B,
+                               torch::stable::Tensor const& A_sf,
+                               torch::stable::Tensor const& B_sf,
+                               torch::stable::Tensor const& alpha, int64_t m,
+                               int64_t n, int64_t k, cudaStream_t stream) {
   uint32_t const mp2 = std::max(static_cast<uint32_t>(16), next_pow_2(m));
 
   if (mp2 <= 16) {
@@ -222,61 +224,65 @@ void cutlass_fp4_gemm_dispatch(torch::Tensor& D, torch::Tensor const& A,
 
 #else
 template <typename OutType>
-void cutlass_fp4_gemm_dispatch(torch::Tensor& D, torch::Tensor const& A,
-                               torch::Tensor const& B,
-                               torch::Tensor const& A_sf,
-                               torch::Tensor const& B_sf,
-                               torch::Tensor const& alpha, int64_t m, int64_t n,
-                               int64_t k, cudaStream_t stream) {
-  TORCH_CHECK(false,
-              "Unsupported CUTLASS version. Set VLLM_CUTLASS_SRC_DIR to "
-              "a CUTLASS 3.8 source directory to enable support.");
+void cutlass_fp4_gemm_dispatch(torch::stable::Tensor& D,
+                               torch::stable::Tensor const& A,
+                               torch::stable::Tensor const& B,
+                               torch::stable::Tensor const& A_sf,
+                               torch::stable::Tensor const& B_sf,
+                               torch::stable::Tensor const& alpha, int64_t m,
+                               int64_t n, int64_t k, cudaStream_t stream) {
+  STD_TORCH_CHECK(false,
+                  "Unsupported CUTLASS version. Set VLLM_CUTLASS_SRC_DIR to "
+                  "a CUTLASS 3.8 source directory to enable support.");
 }
 #endif  // defined(CUTLASS_ARCH_MMA_SM100_SUPPORTED)
 
-#define CHECK_TYPE(x, st, m) \
-  TORCH_CHECK(x.scalar_type() == st, ": Inconsistency of Tensor type:", m)
+#define CHECK_TYPE(x, st, m)             \
+  STD_TORCH_CHECK(x.scalar_type() == st, \
+                  ": Inconsistency of torch::stable::Tensor type:", m)
 #define CHECK_TH_CUDA(x, m) \
-  TORCH_CHECK(x.is_cuda(), m, ": must be a CUDA tensor")
+  STD_TORCH_CHECK(x.is_cuda(), m, ": must be a CUDA tensor")
 #define CHECK_CONTIGUOUS(x, m) \
-  TORCH_CHECK(x.is_contiguous(), m, ": must be contiguous")
+  STD_TORCH_CHECK(x.is_contiguous(), m, ": must be contiguous")
 #define CHECK_INPUT(x, st, m) \
   CHECK_TH_CUDA(x, m);        \
   CHECK_CONTIGUOUS(x, m);     \
   CHECK_TYPE(x, st, m)
 
-constexpr auto FLOAT4_E2M1X2 = at::ScalarType::Byte;
-constexpr auto SF_DTYPE = at::ScalarType::Float8_e4m3fn;
+constexpr auto FLOAT4_E2M1X2 = torch::headeronly::ScalarType::Byte;
+constexpr auto SF_DTYPE = torch::headeronly::ScalarType::Float8_e4m3fn;
 
-void cutlass_scaled_fp4_mm_sm100a(torch::Tensor& D, torch::Tensor const& A,
-                                  torch::Tensor const& B,
-                                  torch::Tensor const& A_sf,
-                                  torch::Tensor const& B_sf,
-                                  torch::Tensor const& alpha) {
+void cutlass_scaled_fp4_mm_sm100a(torch::stable::Tensor& D,
+                                  torch::stable::Tensor const& A,
+                                  torch::stable::Tensor const& B,
+                                  torch::stable::Tensor const& A_sf,
+                                  torch::stable::Tensor const& B_sf,
+                                  torch::stable::Tensor const& alpha) {
   CHECK_INPUT(A, FLOAT4_E2M1X2, "a");
   CHECK_INPUT(B, FLOAT4_E2M1X2, "b");
 
   CHECK_INPUT(A_sf, SF_DTYPE, "scale_a");
   CHECK_INPUT(B_sf, SF_DTYPE, "scale_b");
 
-  CHECK_INPUT(alpha, at::ScalarType::Float, "alpha");
+  CHECK_INPUT(alpha, torch::headeronly::ScalarType::Float, "alpha");
 
-  TORCH_CHECK(A.dim() == 2, "a must be a matrix");
-  TORCH_CHECK(B.dim() == 2, "b must be a matrix");
-  TORCH_CHECK(A.sizes()[1] == B.sizes()[1],
-              "a and b shapes cannot be multiplied (", A.sizes()[0], "x",
-              A.sizes()[1], " and ", B.sizes()[0], "x", B.sizes()[1], ")");
+  STD_TORCH_CHECK(A.dim() == 2, "a must be a matrix");
+  STD_TORCH_CHECK(B.dim() == 2, "b must be a matrix");
+  STD_TORCH_CHECK(A.size(1) == B.size(1),
+                  "a and b shapes cannot be multiplied (", A.size(0), "x",
+                  A.size(1), " and ", B.size(0), "x", B.size(1), ")");
 
-  auto const m = A.sizes()[0];
-  auto const n = B.sizes()[0];
-  auto const k = A.sizes()[1] * 2;
+  auto const m = A.size(0);
+  auto const n = B.size(0);
+  auto const k = A.size(1) * 2;
 
   constexpr int alignment = 32;
-  TORCH_CHECK(k % alignment == 0, "Expected k to be divisible by ", alignment,
-              ", but got a shape: (", A.sizes()[0], "x", A.sizes()[1],
-              "), k: ", k, ".");
-  TORCH_CHECK(n % alignment == 0, "Expected n to be divisible by ", alignment,
-              ", but got b shape: (", B.sizes()[0], "x", B.sizes()[1], ").");
+  STD_TORCH_CHECK(k % alignment == 0, "Expected k to be divisible by ",
+                  alignment, ", but got a shape: (", A.size(0), "x", A.size(1),
+                  "), k: ", k, ".");
+  STD_TORCH_CHECK(n % alignment == 0, "Expected n to be divisible by ",
+                  alignment, ", but got b shape: (", B.size(0), "x", B.size(1),
+                  ").");
 
   auto round_up = [](int x, int y) { return (x + y - 1) / y * y; };
   int rounded_m = round_up(m, 128);
@@ -285,33 +291,34 @@ void cutlass_scaled_fp4_mm_sm100a(torch::Tensor& D, torch::Tensor const& A,
   // integer.
   int rounded_k = round_up(k / 16, 4);
 
-  TORCH_CHECK(A_sf.dim() == 2, "scale_a must be a matrix");
-  TORCH_CHECK(B_sf.dim() == 2, "scale_b must be a matrix");
-  TORCH_CHECK(A_sf.sizes()[1] == B_sf.sizes()[1],
-              "scale_a and scale_b shapes cannot be multiplied (",
-              A_sf.sizes()[0], "x", A_sf.sizes()[1], " and ", B_sf.sizes()[0],
-              "x", B_sf.sizes()[1], ")");
-  TORCH_CHECK(A_sf.sizes()[0] == rounded_m && A_sf.sizes()[1] == rounded_k,
-              "scale_a must be padded and swizzled to a shape (", rounded_m,
-              "x", rounded_k, "), but got a shape (", A_sf.sizes()[0], "x",
-              A_sf.sizes()[1], ")");
-  TORCH_CHECK(B_sf.sizes()[0] == rounded_n && B_sf.sizes()[1] == rounded_k,
-              "scale_b must be padded and swizzled to a shape (", rounded_n,
-              "x", rounded_k, "), but got a shape (", B_sf.sizes()[0], "x",
-              B_sf.sizes()[1], ")");
+  STD_TORCH_CHECK(A_sf.dim() == 2, "scale_a must be a matrix");
+  STD_TORCH_CHECK(B_sf.dim() == 2, "scale_b must be a matrix");
+  STD_TORCH_CHECK(A_sf.size(1) == B_sf.size(1),
+                  "scale_a and scale_b shapes cannot be multiplied (",
+                  A_sf.size(0), "x", A_sf.size(1), " and ", B_sf.size(0), "x",
+                  B_sf.size(1), ")");
+  STD_TORCH_CHECK(A_sf.size(0) == rounded_m && A_sf.size(1) == rounded_k,
+                  "scale_a must be padded and swizzled to a shape (", rounded_m,
+                  "x", rounded_k, "), but got a shape (", A_sf.size(0), "x",
+                  A_sf.size(1), ")");
+  STD_TORCH_CHECK(B_sf.size(0) == rounded_n && B_sf.size(1) == rounded_k,
+                  "scale_b must be padded and swizzled to a shape (", rounded_n,
+                  "x", rounded_k, "), but got a shape (", B_sf.size(0), "x",
+                  B_sf.size(1), ")");
 
-  auto out_dtype = D.dtype();
-  const at::cuda::OptionalCUDAGuard device_guard(device_of(A));
-  const cudaStream_t stream = at::cuda::getCurrentCUDAStream(A.get_device());
+  auto out_dtype = D.scalar_type();
+  const torch::stable::accelerator::DeviceGuard device_guard(
+      A.get_device_index());
+  const cudaStream_t stream = get_current_cuda_stream(A.get_device_index());
 
-  if (out_dtype == at::ScalarType::Half) {
+  if (out_dtype == torch::headeronly::ScalarType::Half) {
     cutlass_fp4_gemm_dispatch<cutlass::half_t>(D, A, B, A_sf, B_sf, alpha, m, n,
                                                k, stream);
-  } else if (out_dtype == at::ScalarType::BFloat16) {
+  } else if (out_dtype == torch::headeronly::ScalarType::BFloat16) {
     cutlass_fp4_gemm_dispatch<cutlass::bfloat16_t>(D, A, B, A_sf, B_sf, alpha,
                                                    m, n, k, stream);
   } else {
-    TORCH_CHECK(false, "Unsupported output data type of nvfp4 mm (", out_dtype,
-                ")");
+    STD_TORCH_CHECK(false, "Unsupported output data type of nvfp4 mm (",
+                    out_dtype, ")");
   }
 }

csrc/libtorch_stable/quantization/fp4/nvfp4_scaled_mm_sm120_kernels.cu

@@ -14,10 +14,9 @@
  * limitations under the License.
  */
 
-#include <torch/all.h>
+#include <torch/csrc/stable/tensor.h>
 
-#include <ATen/cuda/CUDAContext.h>
-#include <c10/cuda/CUDAGuard.h>
+#include "libtorch_stable/torch_utils.h"
 
 #include "cutlass_extensions/common.hpp"
 
@@ -34,19 +33,20 @@
 
 using namespace cute;
 
-#define CHECK_TYPE(x, st, m) \
-  TORCH_CHECK(x.scalar_type() == st, ": Inconsistency of Tensor type:", m)
+#define CHECK_TYPE(x, st, m)             \
+  STD_TORCH_CHECK(x.scalar_type() == st, \
+                  ": Inconsistency of torch::stable::Tensor type:", m)
 #define CHECK_TH_CUDA(x, m) \
-  TORCH_CHECK(x.is_cuda(), m, ": must be a CUDA tensor")
+  STD_TORCH_CHECK(x.is_cuda(), m, ": must be a CUDA tensor")
 #define CHECK_CONTIGUOUS(x, m) \
-  TORCH_CHECK(x.is_contiguous(), m, ": must be contiguous")
+  STD_TORCH_CHECK(x.is_contiguous(), m, ": must be contiguous")
 #define CHECK_INPUT(x, st, m) \
   CHECK_TH_CUDA(x, m);        \
   CHECK_CONTIGUOUS(x, m);     \
   CHECK_TYPE(x, st, m)
 
-constexpr auto FLOAT4_E2M1X2 = at::ScalarType::Byte;
-constexpr auto SF_DTYPE = at::ScalarType::Float8_e4m3fn;
+constexpr auto FLOAT4_E2M1X2 = torch::headeronly::ScalarType::Byte;
+constexpr auto SF_DTYPE = torch::headeronly::ScalarType::Float8_e4m3fn;
 
 struct sm120_fp4_config_M256 {
   using ClusterShape = Shape<_1, _1, _1>;
@@ -109,12 +109,13 @@ struct Fp4GemmSm120 {
 };
 
 template <typename Gemm>
-typename Gemm::Arguments args_from_options(at::Tensor& D, at::Tensor const& A,
-                                           at::Tensor const& B,
-                                           at::Tensor const& A_sf,
-                                           at::Tensor const& B_sf,
-                                           torch::Tensor const& alpha, int M,
-                                           int N, int K) {
+typename Gemm::Arguments args_from_options(torch::stable::Tensor& D,
+                                           torch::stable::Tensor const& A,
+                                           torch::stable::Tensor const& B,
+                                           torch::stable::Tensor const& A_sf,
+                                           torch::stable::Tensor const& B_sf,
+                                           torch::stable::Tensor const& alpha,
+                                           int M, int N, int K) {
   using ElementA = typename Gemm::ElementA;
   using ElementB = typename Gemm::ElementB;
   using ElementD = typename Gemm::ElementD;
@@ -158,18 +159,19 @@ typename Gemm::Arguments args_from_options(at::Tensor& D, at::Tensor const& A,
 }
 
 template <typename Gemm>
-void runGemm(at::Tensor& D, at::Tensor const& A, at::Tensor const& B,
-             at::Tensor const& A_sf, at::Tensor const& B_sf,
-             torch::Tensor const& alpha, int M, int N, int K,
+void runGemm(torch::stable::Tensor& D, torch::stable::Tensor const& A,
+             torch::stable::Tensor const& B, torch::stable::Tensor const& A_sf,
+             torch::stable::Tensor const& B_sf,
+             torch::stable::Tensor const& alpha, int M, int N, int K,
              cudaStream_t stream) {
   Gemm gemm;
 
   auto arguments = args_from_options<Gemm>(D, A, B, A_sf, B_sf, alpha, M, N, K);
 
   size_t workspace_size = Gemm::get_workspace_size(arguments);
-  auto const workspace_options =
-      torch::TensorOptions().dtype(torch::kUInt8).device(A.device());
-  auto workspace = torch::empty(workspace_size, workspace_options);
+  auto workspace =
+      torch::stable::empty(workspace_size, torch::headeronly::ScalarType::Byte,
+                           std::nullopt, A.device());
 
   CUTLASS_CHECK(gemm.can_implement(arguments));
 
@@ -178,12 +180,13 @@ void runGemm(at::Tensor& D, at::Tensor const& A, at::Tensor const& B,
   CUTLASS_CHECK(gemm.run(arguments, workspace.data_ptr(), stream));
 }
 
-void cutlass_fp4_bf16_gemm_dispatch(torch::Tensor& D, torch::Tensor const& A,
-                                    torch::Tensor const& B,
-                                    torch::Tensor const& A_sf,
-                                    torch::Tensor const& B_sf,
-                                    torch::Tensor const& alpha, int m, int n,
-                                    int k, cudaStream_t stream) {
+void cutlass_fp4_bf16_gemm_dispatch(torch::stable::Tensor& D,
+                                    torch::stable::Tensor const& A,
+                                    torch::stable::Tensor const& B,
+                                    torch::stable::Tensor const& A_sf,
+                                    torch::stable::Tensor const& B_sf,
+                                    torch::stable::Tensor const& alpha, int m,
+                                    int n, int k, cudaStream_t stream) {
   uint32_t const mp2 = std::max(static_cast<uint32_t>(16), next_pow_2(m));
   if (mp2 <= 256) {
     runGemm<Fp4GemmSm120<sm120_fp4_config_M256, cutlass::bfloat16_t>::Gemm>(
@@ -194,12 +197,13 @@ void cutlass_fp4_bf16_gemm_dispatch(torch::Tensor& D, torch::Tensor const& A,
   }
 }
 
-void cutlass_fp4_f16_gemm_dispatch(torch::Tensor& D, torch::Tensor const& A,
-                                   torch::Tensor const& B,
-                                   torch::Tensor const& A_sf,
-                                   torch::Tensor const& B_sf,
-                                   torch::Tensor const& alpha, int m, int n,
-                                   int k, cudaStream_t stream) {
+void cutlass_fp4_f16_gemm_dispatch(torch::stable::Tensor& D,
+                                   torch::stable::Tensor const& A,
+                                   torch::stable::Tensor const& B,
+                                   torch::stable::Tensor const& A_sf,
+                                   torch::stable::Tensor const& B_sf,
+                                   torch::stable::Tensor const& alpha, int m,
+                                   int n, int k, cudaStream_t stream) {
   uint32_t const mp2 = std::max(static_cast<uint32_t>(16), next_pow_2(m));
   if (mp2 <= 256) {
     runGemm<Fp4GemmSm120<sm120_fp4_config_M256, cutlass::half_t>::Gemm>(
@@ -210,11 +214,12 @@ void cutlass_fp4_f16_gemm_dispatch(torch::Tensor& D, torch::Tensor const& A,
   }
 }
 
-void cutlass_scaled_fp4_mm_sm120a(torch::Tensor& D, torch::Tensor const& A,
-                                  torch::Tensor const& B,
-                                  torch::Tensor const& A_sf,
-                                  torch::Tensor const& B_sf,
-                                  torch::Tensor const& alpha) {
+void cutlass_scaled_fp4_mm_sm120a(torch::stable::Tensor& D,
+                                  torch::stable::Tensor const& A,
+                                  torch::stable::Tensor const& B,
+                                  torch::stable::Tensor const& A_sf,
+                                  torch::stable::Tensor const& B_sf,
+                                  torch::stable::Tensor const& alpha) {
 #if defined(CUTLASS_ARCH_MMA_SM120_SUPPORTED)
   CHECK_INPUT(A, FLOAT4_E2M1X2, "a");
   CHECK_INPUT(B, FLOAT4_E2M1X2, "b");
@@ -222,24 +227,25 @@ void cutlass_scaled_fp4_mm_sm120a(torch::Tensor& D, torch::Tensor const& A,
   CHECK_INPUT(A_sf, SF_DTYPE, "scale_a");
   CHECK_INPUT(B_sf, SF_DTYPE, "scale_b");
 
-  CHECK_INPUT(alpha, at::ScalarType::Float, "alpha");
+  CHECK_INPUT(alpha, torch::headeronly::ScalarType::Float, "alpha");
 
-  TORCH_CHECK(A.dim() == 2, "a must be a matrix");
-  TORCH_CHECK(B.dim() == 2, "b must be a matrix");
-  TORCH_CHECK(A.sizes()[1] == B.sizes()[1],
-              "a and b shapes cannot be multiplied (", A.sizes()[0], "x",
-              A.sizes()[1], " and ", B.sizes()[0], "x", B.sizes()[1], ")");
+  STD_TORCH_CHECK(A.dim() == 2, "a must be a matrix");
+  STD_TORCH_CHECK(B.dim() == 2, "b must be a matrix");
+  STD_TORCH_CHECK(A.size(1) == B.size(1),
+                  "a and b shapes cannot be multiplied (", A.size(0), "x",
+                  A.size(1), " and ", B.size(0), "x", B.size(1), ")");
 
-  auto const m = A.sizes()[0];
-  auto const n = B.sizes()[0];
-  auto const k = A.sizes()[1] * 2;
+  auto const m = A.size(0);
+  auto const n = B.size(0);
+  auto const k = A.size(1) * 2;
 
   constexpr int alignment = 32;
-  TORCH_CHECK(k % alignment == 0, "Expected k to be divisible by ", alignment,
-              ", but got a shape: (", A.sizes()[0], "x", A.sizes()[1],
-              "), k: ", k, ".");
-  TORCH_CHECK(n % alignment == 0, "Expected n to be divisible by ", alignment,
-              ", but got b shape: (", B.sizes()[0], "x", B.sizes()[1], ").");
+  STD_TORCH_CHECK(k % alignment == 0, "Expected k to be divisible by ",
+                  alignment, ", but got a shape: (", A.size(0), "x", A.size(1),
+                  "), k: ", k, ".");
+  STD_TORCH_CHECK(n % alignment == 0, "Expected n to be divisible by ",
+                  alignment, ", but got b shape: (", B.size(0), "x", B.size(1),
+                  ").");
 
   auto round_up = [](int x, int y) { return (x + y - 1) / y * y; };
   int rounded_m = round_up(m, 128);
@@ -248,38 +254,39 @@ void cutlass_scaled_fp4_mm_sm120a(torch::Tensor& D, torch::Tensor const& A,
   // integer.
   int rounded_k = round_up(k / 16, 4);
 
-  TORCH_CHECK(A_sf.dim() == 2, "scale_a must be a matrix");
-  TORCH_CHECK(B_sf.dim() == 2, "scale_b must be a matrix");
-  TORCH_CHECK(A_sf.sizes()[1] == B_sf.sizes()[1],
-              "scale_a and scale_b shapes cannot be multiplied (",
-              A_sf.sizes()[0], "x", A_sf.sizes()[1], " and ", B_sf.sizes()[0],
-              "x", B_sf.sizes()[1], ")");
-  TORCH_CHECK(A_sf.sizes()[0] == rounded_m && A_sf.sizes()[1] == rounded_k,
-              "scale_a must be padded and swizzled to a shape (", rounded_m,
-              "x", rounded_k, "), but got a shape (", A_sf.sizes()[0], "x",
-              A_sf.sizes()[1], ")");
-  TORCH_CHECK(B_sf.sizes()[0] == rounded_n && B_sf.sizes()[1] == rounded_k,
-              "scale_b must be padded and swizzled to a shape (", rounded_n,
-              "x", rounded_k, "), but got a shape (", B_sf.sizes()[0], "x",
-              B_sf.sizes()[1], ")");
+  STD_TORCH_CHECK(A_sf.dim() == 2, "scale_a must be a matrix");
+  STD_TORCH_CHECK(B_sf.dim() == 2, "scale_b must be a matrix");
+  STD_TORCH_CHECK(A_sf.size(1) == B_sf.size(1),
+                  "scale_a and scale_b shapes cannot be multiplied (",
+                  A_sf.size(0), "x", A_sf.size(1), " and ", B_sf.size(0), "x",
+                  B_sf.size(1), ")");
+  STD_TORCH_CHECK(A_sf.size(0) == rounded_m && A_sf.size(1) == rounded_k,
+                  "scale_a must be padded and swizzled to a shape (", rounded_m,
+                  "x", rounded_k, "), but got a shape (", A_sf.size(0), "x",
+                  A_sf.size(1), ")");
+  STD_TORCH_CHECK(B_sf.size(0) == rounded_n && B_sf.size(1) == rounded_k,
+                  "scale_b must be padded and swizzled to a shape (", rounded_n,
+                  "x", rounded_k, "), but got a shape (", B_sf.size(0), "x",
+                  B_sf.size(1), ")");
 
-  auto out_dtype = D.dtype();
-  const at::cuda::OptionalCUDAGuard device_guard(device_of(A));
-  const cudaStream_t stream = at::cuda::getCurrentCUDAStream(A.get_device());
+  auto out_dtype = D.scalar_type();
+  const torch::stable::accelerator::DeviceGuard device_guard(
+      A.get_device_index());
+  const cudaStream_t stream = get_current_cuda_stream(A.get_device_index());
 
-  if (out_dtype == at::ScalarType::BFloat16) {
+  if (out_dtype == torch::headeronly::ScalarType::BFloat16) {
     return cutlass_fp4_bf16_gemm_dispatch(D, A, B, A_sf, B_sf, alpha, m, n, k,
                                           stream);
-  } else if (out_dtype == at::ScalarType::Half) {
+  } else if (out_dtype == torch::headeronly::ScalarType::Half) {
     return cutlass_fp4_f16_gemm_dispatch(D, A, B, A_sf, B_sf, alpha, m, n, k,
                                          stream);
   } else {
-    TORCH_CHECK(false, "Unsupported output data type of nvfp4 mm sm120 (",
-                out_dtype, ")");
+    STD_TORCH_CHECK(false, "Unsupported output data type of nvfp4 mm sm120 (",
+                    out_dtype, ")");
   }
 #else
-  TORCH_CHECK(false,
-              "Unsupported CUTLASS version. Set VLLM_CUTLASS_SRC_DIR to "
-              "a CUTLASS 3.8 source directory to enable support.");
+  STD_TORCH_CHECK(false,
+                  "Unsupported CUTLASS version. Set VLLM_CUTLASS_SRC_DIR to "
+                  "a CUTLASS 3.8 source directory to enable support.");
 #endif  // defined(CUTLASS_ARCH_MMA_SM120_SUPPORTED)
-}
+}

csrc/libtorch_stable/quantization/fp4/nvfp4_utils.cuh

@@ -20,7 +20,7 @@
 #include <cuda_fp8.h>
 #include <utility>
 
-#include "../../cuda_vec_utils.cuh"
+#include "cuda_vec_utils.cuh"
 
 #if defined(NVFP4_ENABLE_ELTS16) && defined(CUDA_VERSION) && \
     CUDA_VERSION >= 12090

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/cutlass_gemm_caller.cuh

@@ -2,9 +2,10 @@
 
 // clang-format will break include orders
 // clang-format off
-#include <torch/all.h>
+#include <torch/csrc/stable/tensor.h>
+#include <torch/csrc/stable/ops.h>
 
-#include <ATen/cuda/CUDAContext.h>
+#include "libtorch_stable/torch_utils.h"
 
 #include "cutlass/cutlass.h"
 
@@ -25,14 +26,14 @@
 namespace vllm::c3x {
 
 static inline cute::Shape<int, int, int, int> get_problem_shape(
-    torch::Tensor const& a, torch::Tensor const& b) {
+    torch::stable::Tensor const& a, torch::stable::Tensor const& b) {
   int32_t m = a.size(0), n = b.size(1), k = a.size(1);
   return {m, n, k, 1};
 }
 
 template <typename GemmKernel>
 void cutlass_gemm_caller(
-    torch::Device device, cute::Shape<int, int, int, int> prob_shape,
+    torch::stable::Device device, cute::Shape<int, int, int, int> prob_shape,
     typename GemmKernel::MainloopArguments mainloop_args,
     typename GemmKernel::EpilogueArguments epilogue_args,
     typename GemmKernel::TileSchedulerArguments scheduler = {}) {
@@ -50,19 +51,20 @@ void cutlass_gemm_caller(
   CUTLASS_CHECK(gemm_op.can_implement(args));
 
   size_t workspace_size = gemm_op.get_workspace_size(args);
-  auto const workspace_options =
-      torch::TensorOptions().dtype(torch::kUInt8).device(device);
-  auto workspace = torch::empty(workspace_size, workspace_options);
+  auto workspace =
+      torch::stable::empty(workspace_size, torch::headeronly::ScalarType::Byte,
+                           std::nullopt, device);
 
-  auto stream = at::cuda::getCurrentCUDAStream(device.index());
+  auto stream = get_current_cuda_stream(device.index());
 
   cutlass::Status status = gemm_op.run(args, workspace.data_ptr(), stream);
   CUTLASS_CHECK(status);
 }
 
 template <typename Gemm, typename... EpilogueArgs>
-void cutlass_gemm_caller(torch::Tensor& out, torch::Tensor const& a,
-                         torch::Tensor const& b,
+void cutlass_gemm_caller(torch::stable::Tensor& out,
+                         torch::stable::Tensor const& a,
+                         torch::stable::Tensor const& b,
                          EpilogueArgs&&... epilogue_params) {
   using ElementAB = typename Gemm::ElementAB;
   using ElementC = typename Gemm::ElementC;

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_azp_sm90_int8.cu

@@ -4,13 +4,12 @@
 
 namespace vllm {
 
-void cutlass_scaled_mm_azp_sm90_int8(torch::Tensor& out, torch::Tensor const& a,
-                                     torch::Tensor const& b,
-                                     torch::Tensor const& a_scales,
-                                     torch::Tensor const& b_scales,
-                                     torch::Tensor const& azp_adj,
-                                     std::optional<torch::Tensor> const& azp,
-                                     std::optional<torch::Tensor> const& bias) {
+void cutlass_scaled_mm_azp_sm90_int8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias) {
   if (azp) {
     return cutlass_scaled_mm_sm90_int8_epilogue<
         c3x::ScaledEpilogueBiasAzpToken>(out, a, b, a_scales, b_scales, azp_adj,

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm100_fp8.cu

@@ -0,0 +1,22 @@
+#include "scaled_mm_kernels.hpp"
+#include "scaled_mm_blockwise_sm100_fp8_dispatch.cuh"
+#include "cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp"
+
+namespace vllm {
+
+void cutlass_scaled_mm_blockwise_sm100_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales) {
+  if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
+    cutlass_gemm_blockwise_sm100_fp8_dispatch<cutlass::bfloat16_t>(
+        out, a, b, a_scales, b_scales);
+
+  } else {
+    STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
+    cutlass_gemm_blockwise_sm100_fp8_dispatch<cutlass::half_t>(
+        out, a, b, a_scales, b_scales);
+  }
+}
+
+}  // namespace vllm

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm100_fp8_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "cuda_utils.h"
 #include "cutlass/cutlass.h"
 #include "cutlass/numeric_types.h"
@@ -130,10 +132,10 @@ struct cutlass_3x_gemm_fp8_blockwise {
 };
 
 template <typename Gemm>
-void cutlass_gemm_caller_blockwise(torch::Tensor& out, torch::Tensor const& a,
-                                   torch::Tensor const& b,
-                                   torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales) {
+void cutlass_gemm_caller_blockwise(torch::stable::Tensor& out, torch::stable::Tensor const& a,
+                                   torch::stable::Tensor const& b,
+                                   torch::stable::Tensor const& a_scales,
+                                   torch::stable::Tensor const& b_scales) {
   static constexpr bool swap_ab = Gemm::swap_ab;
   using GemmKernel = typename Gemm::GemmKernel;
   using StrideA = typename Gemm::GemmKernel::StrideA;
@@ -200,11 +202,11 @@ void cutlass_gemm_caller_blockwise(torch::Tensor& out, torch::Tensor const& a,
 }
 
 template <typename OutType>
-void cutlass_gemm_blockwise_sm100_fp8_dispatch(torch::Tensor& out,
-                                               torch::Tensor const& a,
-                                               torch::Tensor const& b,
-                                               torch::Tensor const& a_scales,
-                                               torch::Tensor const& b_scales) {
+void cutlass_gemm_blockwise_sm100_fp8_dispatch(torch::stable::Tensor& out,
+                                               torch::stable::Tensor const& a,
+                                               torch::stable::Tensor const& b,
+                                               torch::stable::Tensor const& a_scales,
+                                               torch::stable::Tensor const& b_scales) {
   int32_t m = a.size(0), n = b.size(1), k = a.size(1), sms;
   cudaDeviceGetAttribute(&sms, cudaDevAttrMultiProcessorCount, a.get_device());
 

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm120_fp8.cu

@@ -0,0 +1,22 @@
+#include "scaled_mm_kernels.hpp"
+#include "scaled_mm_blockwise_sm120_fp8_dispatch.cuh"
+#include "cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp"
+
+namespace vllm {
+
+void cutlass_scaled_mm_blockwise_sm120_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales) {
+  if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
+    cutlass_gemm_blockwise_sm120_fp8_dispatch<cutlass::bfloat16_t>(
+        out, a, b, a_scales, b_scales);
+
+  } else {
+    STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
+    cutlass_gemm_blockwise_sm120_fp8_dispatch<cutlass::half_t>(
+        out, a, b, a_scales, b_scales);
+  }
+}
+
+}  // namespace vllm

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm120_fp8_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "cuda_utils.h"
 #include "cutlass/cutlass.h"
 #include "cutlass/numeric_types.h"
@@ -138,10 +140,10 @@ struct sm120_blockwise_fp8_config_M64 {
 };
 
 template <typename Gemm>
-void cutlass_gemm_caller_blockwise(torch::Tensor& out, torch::Tensor const& a,
-                                   torch::Tensor const& b,
-                                   torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales) {
+void cutlass_gemm_caller_blockwise(torch::stable::Tensor& out, torch::stable::Tensor const& a,
+                                   torch::stable::Tensor const& b,
+                                   torch::stable::Tensor const& a_scales,
+                                   torch::stable::Tensor const& b_scales) {
   using GemmKernel = typename Gemm::GemmKernel;
   using StrideA = typename Gemm::GemmKernel::StrideA;
   using StrideB = typename Gemm::GemmKernel::StrideB;
@@ -196,11 +198,11 @@ void cutlass_gemm_caller_blockwise(torch::Tensor& out, torch::Tensor const& a,
 }
 
 template <typename OutType>
-void cutlass_gemm_blockwise_sm120_fp8_dispatch(torch::Tensor& out,
-                                               torch::Tensor const& a,
-                                               torch::Tensor const& b,
-                                               torch::Tensor const& a_scales,
-                                               torch::Tensor const& b_scales) {
+void cutlass_gemm_blockwise_sm120_fp8_dispatch(torch::stable::Tensor& out,
+                                               torch::stable::Tensor const& a,
+                                               torch::stable::Tensor const& b,
+                                               torch::stable::Tensor const& a_scales,
+                                               torch::stable::Tensor const& b_scales) {
   int M = a.size(0);
   if (M <= 256) {
     using Gemm = typename sm120_blockwise_fp8_config_M64<OutType>::Gemm;

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm90_fp8.cu

@@ -0,0 +1,23 @@
+
+#include "scaled_mm_kernels.hpp"
+#include "scaled_mm_blockwise_sm90_fp8_dispatch.cuh"
+#include "cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp"
+
+namespace vllm {
+
+void cutlass_scaled_mm_blockwise_sm90_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales) {
+  if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
+    cutlass_gemm_blockwise_sm90_fp8_dispatch<cutlass::bfloat16_t>(
+        out, a, b, a_scales, b_scales);
+
+  } else {
+    STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
+    cutlass_gemm_blockwise_sm90_fp8_dispatch<cutlass::half_t>(
+        out, a, b, a_scales, b_scales);
+  }
+}
+
+}  // namespace vllm

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_blockwise_sm90_fp8_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "cutlass/cutlass.h"
 #include "cutlass/numeric_types.h"
 
@@ -101,10 +103,10 @@ struct cutlass_3x_gemm_fp8_blockwise {
 };
 
 template <typename Gemm>
-void cutlass_gemm_caller_blockwise(torch::Tensor& out, torch::Tensor const& a,
-                                   torch::Tensor const& b,
-                                   torch::Tensor const& a_scales,
-                                   torch::Tensor const& b_scales) {
+void cutlass_gemm_caller_blockwise(torch::stable::Tensor& out, torch::stable::Tensor const& a,
+                                   torch::stable::Tensor const& b,
+                                   torch::stable::Tensor const& a_scales,
+                                   torch::stable::Tensor const& b_scales) {
   using GemmKernel = typename Gemm::GemmKernel;
   using StrideA = typename Gemm::GemmKernel::StrideA;
   using StrideB = typename Gemm::GemmKernel::StrideB;
@@ -120,7 +122,7 @@ void cutlass_gemm_caller_blockwise(torch::Tensor& out, torch::Tensor const& a,
 
   int32_t m = a.size(0), n = b.size(1), k = a.size(1);
 
-  TORCH_CHECK(m % 4 == 0, "m must be divisible by 4");
+  STD_TORCH_CHECK(m % 4 == 0, "m must be divisible by 4");
 
   StrideA a_stride;
   StrideB b_stride;
@@ -161,11 +163,11 @@ void cutlass_gemm_caller_blockwise(torch::Tensor& out, torch::Tensor const& a,
 }
 
 template <typename OutType>
-void cutlass_gemm_blockwise_sm90_fp8_dispatch(torch::Tensor& out,
-                                              torch::Tensor const& a,
-                                              torch::Tensor const& b,
-                                              torch::Tensor const& a_scales,
-                                              torch::Tensor const& b_scales) {
+void cutlass_gemm_blockwise_sm90_fp8_dispatch(torch::stable::Tensor& out,
+                                              torch::stable::Tensor const& a,
+                                              torch::stable::Tensor const& b,
+                                              torch::stable::Tensor const& a_scales,
+                                              torch::stable::Tensor const& b_scales) {
   // TODO: better heuristics
   cutlass_gemm_caller_blockwise<cutlass_3x_gemm_fp8_blockwise<
       OutType, 1, 128, 128, Shape<_128, _128, _128>,

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_helper.hpp

@@ -1,52 +1,57 @@
-#include <torch/all.h>
+#include <torch/csrc/stable/tensor.h>
+#include <torch/headeronly/core/ScalarType.h>
 #include "cuda_utils.h"
 #include "cutlass_extensions/common.hpp"
 
 template <typename Fp8Func, typename Int8Func, typename BlockwiseFunc>
-void dispatch_scaled_mm(torch::Tensor& c, torch::Tensor const& a,
-                        torch::Tensor const& b, torch::Tensor const& a_scales,
-                        torch::Tensor const& b_scales,
-                        std::optional<torch::Tensor> const& bias,
+void dispatch_scaled_mm(torch::stable::Tensor& c,
+                        torch::stable::Tensor const& a,
+                        torch::stable::Tensor const& b,
+                        torch::stable::Tensor const& a_scales,
+                        torch::stable::Tensor const& b_scales,
+                        std::optional<torch::stable::Tensor> const& bias,
                         Fp8Func fp8_func, Int8Func int8_func,
                         BlockwiseFunc blockwise_func) {
-  TORCH_CHECK(a_scales.dtype() == torch::kFloat32);
-  TORCH_CHECK(b_scales.dtype() == torch::kFloat32);
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
 
   int M = a.size(0), N = b.size(1), K = a.size(1);
 
   if ((a_scales.numel() == 1 || a_scales.numel() == a.size(0)) &&
       (b_scales.numel() == 1 || b_scales.numel() == b.size(1))) {
     // Standard per-tensor/per-token/per-channel scaling
-    TORCH_CHECK(a_scales.is_contiguous() && b_scales.is_contiguous());
-    if (a.dtype() == torch::kFloat8_e4m3fn) {
+    STD_TORCH_CHECK(a_scales.is_contiguous() && b_scales.is_contiguous());
+    if (a.scalar_type() == torch::headeronly::ScalarType::Float8_e4m3fn) {
       fp8_func(c, a, b, a_scales, b_scales, bias);
     } else {
-      TORCH_CHECK(a.dtype() == torch::kInt8);
+      STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
       if constexpr (!std::is_same_v<Int8Func, std::nullptr_t>) {
         int8_func(c, a, b, a_scales, b_scales, bias);
       } else {
         int32_t version_num = get_sm_version_num();
-        TORCH_CHECK(
+        STD_TORCH_CHECK(
             false, "Int8 not supported on SM", version_num,
             ". Use FP8 quantization instead, or run on older arch (SM < 100).");
       }
     }
   } else {
-    TORCH_CHECK(a_scales.dim() == 2, "a scale must be 2d tensor.");
-    TORCH_CHECK(b_scales.dim() == 2, "b scale must be 2d tensor.");
+    STD_TORCH_CHECK(a_scales.dim() == 2, "a scale must be 2d tensor.");
+    STD_TORCH_CHECK(b_scales.dim() == 2, "b scale must be 2d tensor.");
     int32_t version_num = get_sm_version_num();
     if (version_num >= 90) {
-      TORCH_CHECK(
+      STD_TORCH_CHECK(
           a.size(0) == a_scales.size(0) &&
               cuda_utils::ceil_div(a.size(1), int64_t(128)) == a_scales.size(1),
           "a_scale_group_shape must be [1, 128].");
-      TORCH_CHECK(
+      STD_TORCH_CHECK(
           cuda_utils::ceil_div(b.size(0), int64_t(128)) == b_scales.size(0) &&
               cuda_utils::ceil_div(b.size(1), int64_t(128)) == b_scales.size(1),
           "b_scale_group_shape must be [128, 128].");
     }
 
-    TORCH_CHECK(!bias, "Bias not yet supported blockwise scaled_mm");
+    STD_TORCH_CHECK(!bias, "Bias not yet supported blockwise scaled_mm");
     blockwise_func(c, a, b, a_scales, b_scales);
   }
 }

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_kernels.hpp

@@ -0,0 +1,52 @@
+#pragma once
+
+#include <torch/csrc/stable/tensor.h>
+
+namespace vllm {
+
+void cutlass_scaled_mm_sm90_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales,
+    std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_scaled_mm_sm90_int8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales,
+    std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_scaled_mm_azp_sm90_int8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_scaled_mm_blockwise_sm90_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales);
+
+void cutlass_scaled_mm_sm100_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales,
+    std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_scaled_mm_sm120_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales,
+    std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_scaled_mm_blockwise_sm100_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales);
+
+void cutlass_scaled_mm_blockwise_sm120_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales);
+}  // namespace vllm

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm100_fp8.cu

@@ -0,0 +1,24 @@
+#include "scaled_mm_kernels.hpp"
+#include "scaled_mm_sm100_fp8_dispatch.cuh"
+
+namespace vllm {
+
+void cutlass_scaled_mm_sm100_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales,
+    std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.is_contiguous() && b_scales.is_contiguous());
+  if (bias) {
+    STD_TORCH_CHECK(bias->scalar_type() == out.scalar_type(),
+                    "currently bias dtype must match output dtype ",
+                    out.scalar_type());
+    return cutlass_scaled_mm_sm100_fp8_epilogue<true>(out, a, b, a_scales,
+                                                      b_scales, *bias);
+  } else {
+    return cutlass_scaled_mm_sm100_fp8_epilogue<false>(out, a, b, a_scales,
+                                                       b_scales);
+  }
+}
+
+}  // namespace vllm

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm100_fp8_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "scaled_mm.cuh"
 #include "cutlass_gemm_caller.cuh"
 #include "cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp"
@@ -192,8 +194,9 @@ struct sm100_fp8_config_M16_swap_ab {
 };
 
 template <typename Gemm, typename... EpilogueArgs>
-void cutlass_gemm_caller_sm100_fp8(torch::Tensor& out, torch::Tensor const& a,
-                                   torch::Tensor const& b,
+void cutlass_gemm_caller_sm100_fp8(torch::stable::Tensor& out,
+                                   torch::stable::Tensor const& a,
+                                   torch::stable::Tensor const& b,
                                    EpilogueArgs&&... epilogue_params) {
   static constexpr bool swap_ab = Gemm::swap_ab;
   using ElementAB = typename Gemm::ElementAB;
@@ -237,15 +240,15 @@ void cutlass_gemm_caller_sm100_fp8(torch::Tensor& out, torch::Tensor const& a,
 
 template <typename InType, typename OutType, bool EnableBias,
           typename... EpilogueArgs>
-inline void cutlass_gemm_sm100_fp8_dispatch(torch::Tensor& out,
-                                            torch::Tensor const& a,
-                                            torch::Tensor const& b,
-                                            torch::Tensor const& a_scales,
-                                            torch::Tensor const& b_scales,
-                                            EpilogueArgs&&... args) {
+inline void cutlass_gemm_sm100_fp8_dispatch(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, EpilogueArgs&&... args) {
   static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-  TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(b.dtype() == torch::kFloat8_e4m3fn);
+  STD_TORCH_CHECK(a.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(b.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
 
   using Cutlass3xGemmDefault =
       typename sm100_fp8_config_default<InType, OutType,
@@ -292,22 +295,24 @@ inline void cutlass_gemm_sm100_fp8_dispatch(torch::Tensor& out,
 }
 
 template <bool EnableBias, typename... EpilogueArgs>
-void cutlass_scaled_mm_sm100_fp8_epilogue(torch::Tensor& out,
-                                          torch::Tensor const& a,
-                                          torch::Tensor const& b,
-                                          torch::Tensor const& a_scales,
-                                          torch::Tensor const& b_scales,
+void cutlass_scaled_mm_sm100_fp8_epilogue(torch::stable::Tensor& out,
+                                          torch::stable::Tensor const& a,
+                                          torch::stable::Tensor const& b,
+                                          torch::stable::Tensor const& a_scales,
+                                          torch::stable::Tensor const& b_scales,
                                           EpilogueArgs&&... epilogue_args) {
-  TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(b.dtype() == torch::kFloat8_e4m3fn);
+  STD_TORCH_CHECK(a.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(b.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
 
-  if (out.dtype() == torch::kBFloat16) {
+  if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
     return cutlass_gemm_sm100_fp8_dispatch<cutlass::float_e4m3_t,
                                            cutlass::bfloat16_t, EnableBias>(
         out, a, b, a_scales, b_scales,
         std::forward<EpilogueArgs>(epilogue_args)...);
   } else {
-    TORCH_CHECK(out.dtype() == torch::kFloat16);
+    STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
     return cutlass_gemm_sm100_fp8_dispatch<cutlass::float_e4m3_t,
                                            cutlass::half_t, EnableBias>(
         out, a, b, a_scales, b_scales,

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm120_fp8.cu

@@ -0,0 +1,25 @@
+#include "scaled_mm_kernels.hpp"
+#include "scaled_mm_sm120_fp8_dispatch.cuh"
+#include "cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp"
+
+namespace vllm {
+
+void cutlass_scaled_mm_sm120_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales,
+    std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.is_contiguous() && b_scales.is_contiguous());
+  if (bias) {
+    STD_TORCH_CHECK(bias->scalar_type() == out.scalar_type(),
+                    "currently bias dtype must match output dtype ",
+                    out.scalar_type());
+    return cutlass_scaled_mm_sm120_fp8_epilogue<c3x::ScaledEpilogueBias>(
+        out, a, b, a_scales, b_scales, *bias);
+  } else {
+    return cutlass_scaled_mm_sm120_fp8_epilogue<c3x::ScaledEpilogue>(
+        out, a, b, a_scales, b_scales);
+  }
+}
+
+}  // namespace vllm

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm120_fp8_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "scaled_mm.cuh"
 #include "cutlass_gemm_caller.cuh"
 
@@ -138,13 +140,15 @@ struct sm120_fp8_config_M16 {
 template <typename InType, typename OutType,
           template <typename, typename, typename> typename Epilogue,
           typename... EpilogueArgs>
-inline void cutlass_gemm_sm120_fp8_dispatch(torch::Tensor& out,
-                                            torch::Tensor const& a,
-                                            torch::Tensor const& b,
+inline void cutlass_gemm_sm120_fp8_dispatch(torch::stable::Tensor& out,
+                                            torch::stable::Tensor const& a,
+                                            torch::stable::Tensor const& b,
                                             EpilogueArgs&&... args) {
   static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-  TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(b.dtype() == torch::kFloat8_e4m3fn);
+  STD_TORCH_CHECK(a.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(b.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
 
   int M = a.size(0);
 
@@ -177,19 +181,21 @@ inline void cutlass_gemm_sm120_fp8_dispatch(torch::Tensor& out,
 
 template <template <typename, typename, typename> typename Epilogue,
           typename... EpilogueArgs>
-void cutlass_scaled_mm_sm120_fp8_epilogue(torch::Tensor& out,
-                                          torch::Tensor const& a,
-                                          torch::Tensor const& b,
+void cutlass_scaled_mm_sm120_fp8_epilogue(torch::stable::Tensor& out,
+                                          torch::stable::Tensor const& a,
+                                          torch::stable::Tensor const& b,
                                           EpilogueArgs&&... epilogue_args) {
-  TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(b.dtype() == torch::kFloat8_e4m3fn);
+  STD_TORCH_CHECK(a.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(b.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
 
-  if (out.dtype() == torch::kBFloat16) {
+  if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
     return cutlass_gemm_sm120_fp8_dispatch<cutlass::float_e4m3_t,
                                            cutlass::bfloat16_t, Epilogue>(
         out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
   } else {
-    TORCH_CHECK(out.dtype() == torch::kFloat16);
+    STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
     return cutlass_gemm_sm120_fp8_dispatch<cutlass::float_e4m3_t,
                                            cutlass::half_t, Epilogue>(
         out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm90_fp8.cu

@@ -0,0 +1,24 @@
+#include "scaled_mm_kernels.hpp"
+#include "scaled_mm_sm90_fp8_dispatch.cuh"
+
+namespace vllm {
+
+void cutlass_scaled_mm_sm90_fp8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales,
+    std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.is_contiguous() && b_scales.is_contiguous());
+  if (bias) {
+    STD_TORCH_CHECK(bias->scalar_type() == out.scalar_type(),
+                    "currently bias dtype must match output dtype ",
+                    out.scalar_type());
+    return cutlass_scaled_mm_sm90_fp8_epilogue<true>(out, a, b, a_scales,
+                                                     b_scales, *bias);
+  } else {
+    return cutlass_scaled_mm_sm90_fp8_epilogue<false>(out, a, b, a_scales,
+                                                      b_scales);
+  }
+}
+
+}  // namespace vllm

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm90_fp8_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "scaled_mm.cuh"
 #include "cutlass_gemm_caller.cuh"
 #include "cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp"
@@ -235,8 +237,9 @@ struct sm90_fp8_config_M16_N8192 {
 };
 
 template <typename Gemm, typename... EpilogueArgs>
-void cutlass_gemm_caller_sm90_fp8(torch::Tensor& out, torch::Tensor const& a,
-                                  torch::Tensor const& b,
+void cutlass_gemm_caller_sm90_fp8(torch::stable::Tensor& out,
+                                  torch::stable::Tensor const& a,
+                                  torch::stable::Tensor const& b,
                                   EpilogueArgs&&... epilogue_params) {
   static constexpr bool swap_ab = Gemm::swap_ab;
   using ElementAB = typename Gemm::ElementAB;
@@ -280,15 +283,15 @@ void cutlass_gemm_caller_sm90_fp8(torch::Tensor& out, torch::Tensor const& a,
 
 template <typename InType, typename OutType, bool EnableBias,
           typename... EpilogueArgs>
-inline void cutlass_gemm_sm90_fp8_dispatch(torch::Tensor& out,
-                                           torch::Tensor const& a,
-                                           torch::Tensor const& b,
-                                           torch::Tensor const& a_scales,
-                                           torch::Tensor const& b_scales,
-                                           EpilogueArgs&&... args) {
+inline void cutlass_gemm_sm90_fp8_dispatch(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, EpilogueArgs&&... args) {
   static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-  TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(b.dtype() == torch::kFloat8_e4m3fn);
+  STD_TORCH_CHECK(a.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(b.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
 
   using Cutlass3xGemmDefault =
       typename sm90_fp8_config_default<InType, OutType,
@@ -347,22 +350,24 @@ inline void cutlass_gemm_sm90_fp8_dispatch(torch::Tensor& out,
 }
 
 template <bool EnableBias, typename... EpilogueArgs>
-void cutlass_scaled_mm_sm90_fp8_epilogue(torch::Tensor& out,
-                                         torch::Tensor const& a,
-                                         torch::Tensor const& b,
-                                         torch::Tensor const& a_scales,
-                                         torch::Tensor const& b_scales,
+void cutlass_scaled_mm_sm90_fp8_epilogue(torch::stable::Tensor& out,
+                                         torch::stable::Tensor const& a,
+                                         torch::stable::Tensor const& b,
+                                         torch::stable::Tensor const& a_scales,
+                                         torch::stable::Tensor const& b_scales,
                                          EpilogueArgs&&... epilogue_args) {
-  TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(b.dtype() == torch::kFloat8_e4m3fn);
+  STD_TORCH_CHECK(a.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(b.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
 
-  if (out.dtype() == torch::kBFloat16) {
+  if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
     return cutlass_gemm_sm90_fp8_dispatch<cutlass::float_e4m3_t,
                                           cutlass::bfloat16_t, EnableBias>(
         out, a, b, a_scales, b_scales,
         std::forward<EpilogueArgs>(epilogue_args)...);
   } else {
-    TORCH_CHECK(out.dtype() == torch::kFloat16);
+    STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
     return cutlass_gemm_sm90_fp8_dispatch<cutlass::float_e4m3_t,
                                           cutlass::half_t, EnableBias>(
         out, a, b, a_scales, b_scales,

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm90_int8.cu

@@ -0,0 +1,25 @@
+#include "scaled_mm_kernels.hpp"
+#include "scaled_mm_sm90_int8_dispatch.cuh"
+#include "cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp"
+
+namespace vllm {
+
+void cutlass_scaled_mm_sm90_int8(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales,
+    std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.is_contiguous() && b_scales.is_contiguous());
+  if (bias) {
+    STD_TORCH_CHECK(bias->scalar_type() == out.scalar_type(),
+                    "currently bias dtype must match output dtype ",
+                    out.scalar_type());
+    return cutlass_scaled_mm_sm90_int8_epilogue<c3x::ScaledEpilogueBias>(
+        out, a, b, a_scales, b_scales, *bias);
+  } else {
+    return cutlass_scaled_mm_sm90_int8_epilogue<c3x::ScaledEpilogue>(
+        out, a, b, a_scales, b_scales);
+  }
+}
+
+}  // namespace vllm

csrc/libtorch_stable/quantization/w8a8/cutlass/c3x/scaled_mm_sm90_int8_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "scaled_mm.cuh"
 #include "cutlass_gemm_caller.cuh"
 
@@ -87,13 +89,13 @@ struct sm90_int8_config_M32_NSmall {
 template <typename InType, typename OutType,
           template <typename, typename, typename> typename Epilogue,
           typename... EpilogueArgs>
-inline void cutlass_gemm_sm90_int8_dispatch(torch::Tensor& out,
-                                            torch::Tensor const& a,
-                                            torch::Tensor const& b,
+inline void cutlass_gemm_sm90_int8_dispatch(torch::stable::Tensor& out,
+                                            torch::stable::Tensor const& a,
+                                            torch::stable::Tensor const& b,
                                             EpilogueArgs&&... args) {
   static_assert(std::is_same<InType, int8_t>());
-  TORCH_CHECK(a.dtype() == torch::kInt8);
-  TORCH_CHECK(b.dtype() == torch::kInt8);
+  STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
+  STD_TORCH_CHECK(b.scalar_type() == torch::headeronly::ScalarType::Char);
 
   using Cutlass3xGemmDefault =
       typename sm90_int8_config_default<InType, OutType,
@@ -142,19 +144,19 @@ inline void cutlass_gemm_sm90_int8_dispatch(torch::Tensor& out,
 
 template <template <typename, typename, typename> typename Epilogue,
           typename... EpilogueArgs>
-void cutlass_scaled_mm_sm90_int8_epilogue(torch::Tensor& out,
-                                          torch::Tensor const& a,
-                                          torch::Tensor const& b,
+void cutlass_scaled_mm_sm90_int8_epilogue(torch::stable::Tensor& out,
+                                          torch::stable::Tensor const& a,
+                                          torch::stable::Tensor const& b,
                                           EpilogueArgs&&... epilogue_args) {
-  TORCH_CHECK(a.dtype() == torch::kInt8);
-  TORCH_CHECK(b.dtype() == torch::kInt8);
+  STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
+  STD_TORCH_CHECK(b.scalar_type() == torch::headeronly::ScalarType::Char);
 
-  if (out.dtype() == torch::kBFloat16) {
+  if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
     return cutlass_gemm_sm90_int8_dispatch<int8_t, cutlass::bfloat16_t,
                                            Epilogue>(
         out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
   } else {
-    TORCH_CHECK(out.dtype() == torch::kFloat16);
+    STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
     return cutlass_gemm_sm90_int8_dispatch<int8_t, cutlass::half_t, Epilogue>(
         out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
   }

csrc/libtorch_stable/quantization/w8a8/cutlass/moe/get_group_starts.cuh

@@ -1,10 +1,10 @@
 #pragma once
 
 #include <cuda.h>
-#include <torch/all.h>
-#include <c10/cuda/CUDAStream.h>
+#include <torch/csrc/stable/tensor.h>
+#include <torch/headeronly/core/ScalarType.h>
+#include "libtorch_stable/torch_utils.h"
 
-#include "core/scalar_type.hpp"
 #include "cutlass/bfloat16.h"
 #include "cutlass/float8.h"
 
@@ -31,7 +31,7 @@ __global__ void get_group_gemm_starts(
 }
 
 #define __CALL_GET_STARTS_KERNEL(TENSOR_C_TYPE, C_TYPE)                    \
-  else if (out_tensors.dtype() == TENSOR_C_TYPE) {                         \
+  else if (out_tensors.scalar_type() == TENSOR_C_TYPE) {                   \
     get_group_gemm_starts<cutlass::float_e4m3_t, C_TYPE, float>            \
         <<<1, num_experts, 0, stream>>>(                                   \
             static_cast<int64_t*>(expert_offsets.data_ptr()),              \
@@ -51,32 +51,39 @@ __global__ void get_group_gemm_starts(
 namespace {
 
 void run_get_group_gemm_starts(
-    torch::Tensor const& expert_offsets, torch::Tensor& a_ptrs,
-    torch::Tensor& b_ptrs, torch::Tensor& out_ptrs,
-    torch::Tensor& a_scales_ptrs, torch::Tensor& b_scales_ptrs,
-    torch::Tensor const& a_tensors, torch::Tensor const& b_tensors,
-    torch::Tensor& out_tensors, torch::Tensor const& a_scales,
-    torch::Tensor const& b_scales) {
-  TORCH_CHECK(a_tensors.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(b_tensors.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(a_scales.dtype() == torch::kFloat32);
-  TORCH_CHECK(b_scales.dtype() == torch::kFloat32);
+    torch::stable::Tensor const& expert_offsets, torch::stable::Tensor& a_ptrs,
+    torch::stable::Tensor& b_ptrs, torch::stable::Tensor& out_ptrs,
+    torch::stable::Tensor& a_scales_ptrs, torch::stable::Tensor& b_scales_ptrs,
+    torch::stable::Tensor const& a_tensors,
+    torch::stable::Tensor const& b_tensors, torch::stable::Tensor& out_tensors,
+    torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales) {
+  STD_TORCH_CHECK(a_tensors.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(b_tensors.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
   // expect int64_t to avoid overflow during offset calculations
-  TORCH_CHECK(expert_offsets.dtype() == torch::kInt64);
+  STD_TORCH_CHECK(expert_offsets.scalar_type() ==
+                  torch::headeronly::ScalarType::Long);
 
   int num_experts = static_cast<int>(expert_offsets.size(0));
   bool per_act_token = a_scales.numel() != 1;
   bool per_out_ch = b_scales.numel() != num_experts;
 
-  auto stream = at::cuda::getCurrentCUDAStream(a_tensors.device().index());
+  auto stream = get_current_cuda_stream(a_tensors.get_device_index());
 
   if (false) {
   }
-  __CALL_GET_STARTS_KERNEL(torch::kBFloat16, cutlass::bfloat16_t)
-  __CALL_GET_STARTS_KERNEL(torch::kFloat16, half)
+  __CALL_GET_STARTS_KERNEL(torch::headeronly::ScalarType::BFloat16,
+                           cutlass::bfloat16_t)
+  __CALL_GET_STARTS_KERNEL(torch::headeronly::ScalarType::Half, half)
   else {
-    TORCH_CHECK(false, "Invalid output type (must be float16 or bfloat16)");
+    STD_TORCH_CHECK(false, "Invalid output type (must be float16 or bfloat16)");
   }
 }
 
-}  // namespace
+}  // namespace

csrc/libtorch_stable/quantization/w8a8/cutlass/moe/grouped_mm_c3x.cuh

@@ -6,6 +6,7 @@
 #include "cutlass/epilogue/collective/collective_builder.hpp"
 #include "cutlass/gemm/device/gemm_universal_adapter.h"
 
+#include <torch/csrc/stable/ops.h>
 #include "cutlass_extensions/epilogue/scaled_mm_epilogues_c3x.hpp"
 #include "cutlass_extensions/common.hpp"
 #include "get_group_starts.cuh"
@@ -84,13 +85,17 @@ struct cutlass_3x_group_gemm {
 };
 
 template <typename Gemm>
-void cutlass_group_gemm_caller(
-    torch::Tensor& out_tensors, torch::Tensor const& a_tensors,
-    torch::Tensor const& b_tensors, torch::Tensor const& a_scales,
-    torch::Tensor const& b_scales, torch::Tensor const& expert_offsets,
-    torch::Tensor const& problem_sizes, torch::Tensor const& a_strides,
-    torch::Tensor const& b_strides, torch::Tensor const& c_strides,
-    bool per_act_token, bool per_out_ch) {
+void cutlass_group_gemm_caller(torch::stable::Tensor& out_tensors,
+                               torch::stable::Tensor const& a_tensors,
+                               torch::stable::Tensor const& b_tensors,
+                               torch::stable::Tensor const& a_scales,
+                               torch::stable::Tensor const& b_scales,
+                               torch::stable::Tensor const& expert_offsets,
+                               torch::stable::Tensor const& problem_sizes,
+                               torch::stable::Tensor const& a_strides,
+                               torch::stable::Tensor const& b_strides,
+                               torch::stable::Tensor const& c_strides,
+                               bool per_act_token, bool per_out_ch) {
   static constexpr bool swap_ab = Gemm::swap_ab;
 
   using ElementAB = typename Gemm::ElementAB;
@@ -98,16 +103,20 @@ void cutlass_group_gemm_caller(
 
   int num_experts = static_cast<int>(expert_offsets.size(0));
 
-  auto stream = at::cuda::getCurrentCUDAStream(a_tensors.device().index());
+  auto stream = get_current_cuda_stream(a_tensors.get_device_index());
 
-  auto options_int =
-      torch::TensorOptions().dtype(torch::kInt64).device(a_tensors.device());
+  auto device = a_tensors.device();
 
-  torch::Tensor a_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor b_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor out_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor a_scales_ptrs = torch::empty(num_experts, options_int);
-  torch::Tensor b_scales_ptrs = torch::empty(num_experts, options_int);
+  torch::stable::Tensor a_ptrs = torch::stable::empty(
+      {num_experts}, torch::headeronly::ScalarType::Long, std::nullopt, device);
+  torch::stable::Tensor b_ptrs = torch::stable::empty(
+      {num_experts}, torch::headeronly::ScalarType::Long, std::nullopt, device);
+  torch::stable::Tensor out_ptrs = torch::stable::empty(
+      {num_experts}, torch::headeronly::ScalarType::Long, std::nullopt, device);
+  torch::stable::Tensor a_scales_ptrs = torch::stable::empty(
+      {num_experts}, torch::headeronly::ScalarType::Long, std::nullopt, device);
+  torch::stable::Tensor b_scales_ptrs = torch::stable::empty(
+      {num_experts}, torch::headeronly::ScalarType::Long, std::nullopt, device);
 
   run_get_group_gemm_starts(expert_offsets, a_ptrs, b_ptrs, out_ptrs,
                             a_scales_ptrs, b_scales_ptrs, a_tensors, b_tensors,
@@ -156,7 +165,7 @@ void cutlass_group_gemm_caller(
       static_cast<ElementD**>(out_ptrs.data_ptr()),
       static_cast<StrideC*>(c_strides.data_ptr())};
 
-  int device_id = a_tensors.device().index();
+  int device_id = a_tensors.get_device_index();
   static const cutlass::KernelHardwareInfo hw_info{
       device_id, cutlass::KernelHardwareInfo::query_device_multiprocessor_count(
                      device_id)};
@@ -170,9 +179,9 @@ void cutlass_group_gemm_caller(
   CUTLASS_CHECK(gemm_op.can_implement(args));
 
   size_t workspace_size = gemm_op.get_workspace_size(args);
-  auto const workspace_options =
-      torch::TensorOptions().dtype(torch::kUInt8).device(a_tensors.device());
-  auto workspace = torch::empty(workspace_size, workspace_options);
+  auto workspace =
+      torch::stable::empty(workspace_size, torch::headeronly::ScalarType::Byte,
+                           std::nullopt, device);
 
   cutlass::Status status = gemm_op.run(args, workspace.data_ptr(), stream);
   CUTLASS_CHECK(status);

csrc/libtorch_stable/quantization/w8a8/cutlass/moe/grouped_mm_c3x_sm100.cu

@@ -1,7 +1,8 @@
 #include <cudaTypedefs.h>
 
-#include <c10/cuda/CUDAGuard.h>
-#include <torch/all.h>
+#include "libtorch_stable/torch_utils.h"
+#include <torch/csrc/stable/tensor.h>
+#include <torch/headeronly/core/ScalarType.h>
 
 #include "cutlass/cutlass.h"
 #include "grouped_mm_c3x.cuh"
@@ -62,21 +63,27 @@ struct sm100_fp8_config_N8192 {
 };
 
 template <typename InType, typename OutType>
-void run_cutlass_moe_mm_sm100(
-    torch::Tensor& out_tensors, torch::Tensor const& a_tensors,
-    torch::Tensor const& b_tensors, torch::Tensor const& a_scales,
-    torch::Tensor const& b_scales, torch::Tensor const& expert_offsets,
-    torch::Tensor const& problem_sizes, torch::Tensor const& a_strides,
-    torch::Tensor const& b_strides, torch::Tensor const& c_strides,
-    bool per_act_token, bool per_out_ch) {
-  TORCH_CHECK(a_tensors.size(0) > 0, "No input A tensors provided.");
-  TORCH_CHECK(b_tensors.size(0) > 0, "No input B tensors provided.");
-  TORCH_CHECK(out_tensors.size(0) > 0, "No output tensors provided.");
+void run_cutlass_moe_mm_sm100(torch::stable::Tensor& out_tensors,
+                              torch::stable::Tensor const& a_tensors,
+                              torch::stable::Tensor const& b_tensors,
+                              torch::stable::Tensor const& a_scales,
+                              torch::stable::Tensor const& b_scales,
+                              torch::stable::Tensor const& expert_offsets,
+                              torch::stable::Tensor const& problem_sizes,
+                              torch::stable::Tensor const& a_strides,
+                              torch::stable::Tensor const& b_strides,
+                              torch::stable::Tensor const& c_strides,
+                              bool per_act_token, bool per_out_ch) {
+  STD_TORCH_CHECK(a_tensors.size(0) > 0, "No input A tensors provided.");
+  STD_TORCH_CHECK(b_tensors.size(0) > 0, "No input B tensors provided.");
+  STD_TORCH_CHECK(out_tensors.size(0) > 0, "No output tensors provided.");
 
-  TORCH_CHECK(a_tensors.dtype() == torch::kFloat8_e4m3fn,
-              "A tensors must be of type float8_e4m3fn.");
-  TORCH_CHECK(b_tensors.dtype() == torch::kFloat8_e4m3fn,
-              "B tensors must be of type float8_e4m3fn.");
+  STD_TORCH_CHECK(
+      a_tensors.scalar_type() == torch::headeronly::ScalarType::Float8_e4m3fn,
+      "A tensors must be of type float8_e4m3fn.");
+  STD_TORCH_CHECK(
+      b_tensors.scalar_type() == torch::headeronly::ScalarType::Float8_e4m3fn,
+      "B tensors must be of type float8_e4m3fn.");
 
   using Cutlass3xGemmDefault = typename sm100_fp8_config_default<
       InType, OutType, vllm::c3x::ScaledEpilogueArray>::Cutlass3xGemm;
@@ -107,14 +114,18 @@ void run_cutlass_moe_mm_sm100(
 }
 }  // namespace
 
-void dispatch_moe_mm_sm100(
-    torch::Tensor& out_tensors, torch::Tensor const& a_tensors,
-    torch::Tensor const& b_tensors, torch::Tensor const& a_scales,
-    torch::Tensor const& b_scales, torch::Tensor const& expert_offsets,
-    torch::Tensor const& problem_sizes, torch::Tensor const& a_strides,
-    torch::Tensor const& b_strides, torch::Tensor const& c_strides,
-    bool per_act_token, bool per_out_ch) {
-  if (out_tensors.dtype() == torch::kBFloat16) {
+void dispatch_moe_mm_sm100(torch::stable::Tensor& out_tensors,
+                           torch::stable::Tensor const& a_tensors,
+                           torch::stable::Tensor const& b_tensors,
+                           torch::stable::Tensor const& a_scales,
+                           torch::stable::Tensor const& b_scales,
+                           torch::stable::Tensor const& expert_offsets,
+                           torch::stable::Tensor const& problem_sizes,
+                           torch::stable::Tensor const& a_strides,
+                           torch::stable::Tensor const& b_strides,
+                           torch::stable::Tensor const& c_strides,
+                           bool per_act_token, bool per_out_ch) {
+  if (out_tensors.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
     run_cutlass_moe_mm_sm100<cutlass::float_e4m3_t, cutlass::bfloat16_t>(
         out_tensors, a_tensors, b_tensors, a_scales, b_scales, expert_offsets,
         problem_sizes, a_strides, b_strides, c_strides, per_act_token,
@@ -127,13 +138,17 @@ void dispatch_moe_mm_sm100(
   }
 }
 
-void cutlass_moe_mm_sm100(
-    torch::Tensor& out_tensors, torch::Tensor const& a_tensors,
-    torch::Tensor const& b_tensors, torch::Tensor const& a_scales,
-    torch::Tensor const& b_scales, torch::Tensor const& expert_offsets,
-    torch::Tensor const& problem_sizes, torch::Tensor const& a_strides,
-    torch::Tensor const& b_strides, torch::Tensor const& c_strides,
-    bool per_act_token, bool per_out_ch) {
+void cutlass_moe_mm_sm100(torch::stable::Tensor& out_tensors,
+                          torch::stable::Tensor const& a_tensors,
+                          torch::stable::Tensor const& b_tensors,
+                          torch::stable::Tensor const& a_scales,
+                          torch::stable::Tensor const& b_scales,
+                          torch::stable::Tensor const& expert_offsets,
+                          torch::stable::Tensor const& problem_sizes,
+                          torch::stable::Tensor const& a_strides,
+                          torch::stable::Tensor const& b_strides,
+                          torch::stable::Tensor const& c_strides,
+                          bool per_act_token, bool per_out_ch) {
   dispatch_moe_mm_sm100(out_tensors, a_tensors, b_tensors, a_scales, b_scales,
                         expert_offsets, problem_sizes, a_strides, b_strides,
                         c_strides, per_act_token, per_out_ch);

csrc/libtorch_stable/quantization/w8a8/cutlass/moe/grouped_mm_c3x_sm90.cu

@@ -1,7 +1,8 @@
 #include <cudaTypedefs.h>
 
-#include <c10/cuda/CUDAGuard.h>
-#include <torch/all.h>
+#include "libtorch_stable/torch_utils.h"
+#include <torch/csrc/stable/tensor.h>
+#include <torch/headeronly/core/ScalarType.h>
 
 #include "cutlass/cutlass.h"
 #include "grouped_mm_c3x.cuh"
@@ -103,21 +104,27 @@ struct sm90_fp8_config_N8192 {
 };
 
 template <typename InType, typename OutType>
-void run_cutlass_moe_mm_sm90(
-    torch::Tensor& out_tensors, torch::Tensor const& a_tensors,
-    torch::Tensor const& b_tensors, torch::Tensor const& a_scales,
-    torch::Tensor const& b_scales, torch::Tensor const& expert_offsets,
-    torch::Tensor const& problem_sizes, torch::Tensor const& a_strides,
-    torch::Tensor const& b_strides, torch::Tensor const& c_strides,
-    bool per_act_token, bool per_out_ch) {
-  TORCH_CHECK(a_tensors.size(0) > 0, "No input A tensors provided.");
-  TORCH_CHECK(b_tensors.size(0) > 0, "No input B tensors provided.");
-  TORCH_CHECK(out_tensors.size(0) > 0, "No output tensors provided.");
+void run_cutlass_moe_mm_sm90(torch::stable::Tensor& out_tensors,
+                             torch::stable::Tensor const& a_tensors,
+                             torch::stable::Tensor const& b_tensors,
+                             torch::stable::Tensor const& a_scales,
+                             torch::stable::Tensor const& b_scales,
+                             torch::stable::Tensor const& expert_offsets,
+                             torch::stable::Tensor const& problem_sizes,
+                             torch::stable::Tensor const& a_strides,
+                             torch::stable::Tensor const& b_strides,
+                             torch::stable::Tensor const& c_strides,
+                             bool per_act_token, bool per_out_ch) {
+  STD_TORCH_CHECK(a_tensors.size(0) > 0, "No input A tensors provided.");
+  STD_TORCH_CHECK(b_tensors.size(0) > 0, "No input B tensors provided.");
+  STD_TORCH_CHECK(out_tensors.size(0) > 0, "No output tensors provided.");
 
-  TORCH_CHECK(a_tensors.dtype() == torch::kFloat8_e4m3fn,
-              "A tensors must be of type float8_e4m3fn.");
-  TORCH_CHECK(b_tensors.dtype() == torch::kFloat8_e4m3fn,
-              "B tensors must be of type float8_e4m3fn.");
+  STD_TORCH_CHECK(
+      a_tensors.scalar_type() == torch::headeronly::ScalarType::Float8_e4m3fn,
+      "A tensors must be of type float8_e4m3fn.");
+  STD_TORCH_CHECK(
+      b_tensors.scalar_type() == torch::headeronly::ScalarType::Float8_e4m3fn,
+      "B tensors must be of type float8_e4m3fn.");
 
   using Cutlass3xGemmN8192 = typename sm90_fp8_config_N8192<
       InType, OutType, vllm::c3x::ScaledEpilogueArray>::Cutlass3xGemm;
@@ -163,14 +170,18 @@ void run_cutlass_moe_mm_sm90(
   }
 }
 
-void dispatch_moe_mm_sm90(
-    torch::Tensor& out_tensors, torch::Tensor const& a_tensors,
-    torch::Tensor const& b_tensors, torch::Tensor const& a_scales,
-    torch::Tensor const& b_scales, torch::Tensor const& expert_offsets,
-    torch::Tensor const& problem_sizes, torch::Tensor const& a_strides,
-    torch::Tensor const& b_strides, torch::Tensor const& c_strides,
-    bool per_act_token, bool per_out_ch) {
-  if (out_tensors.dtype() == torch::kBFloat16) {
+void dispatch_moe_mm_sm90(torch::stable::Tensor& out_tensors,
+                          torch::stable::Tensor const& a_tensors,
+                          torch::stable::Tensor const& b_tensors,
+                          torch::stable::Tensor const& a_scales,
+                          torch::stable::Tensor const& b_scales,
+                          torch::stable::Tensor const& expert_offsets,
+                          torch::stable::Tensor const& problem_sizes,
+                          torch::stable::Tensor const& a_strides,
+                          torch::stable::Tensor const& b_strides,
+                          torch::stable::Tensor const& c_strides,
+                          bool per_act_token, bool per_out_ch) {
+  if (out_tensors.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
     run_cutlass_moe_mm_sm90<cutlass::float_e4m3_t, cutlass::bfloat16_t>(
         out_tensors, a_tensors, b_tensors, a_scales, b_scales, expert_offsets,
         problem_sizes, a_strides, b_strides, c_strides, per_act_token,
@@ -185,13 +196,17 @@ void dispatch_moe_mm_sm90(
 
 }  // namespace
 
-void cutlass_moe_mm_sm90(
-    torch::Tensor& out_tensors, torch::Tensor const& a_tensors,
-    torch::Tensor const& b_tensors, torch::Tensor const& a_scales,
-    torch::Tensor const& b_scales, torch::Tensor const& expert_offsets,
-    torch::Tensor const& problem_sizes, torch::Tensor const& a_strides,
-    torch::Tensor const& b_strides, torch::Tensor const& c_strides,
-    bool per_act_token, bool per_out_ch) {
+void cutlass_moe_mm_sm90(torch::stable::Tensor& out_tensors,
+                         torch::stable::Tensor const& a_tensors,
+                         torch::stable::Tensor const& b_tensors,
+                         torch::stable::Tensor const& a_scales,
+                         torch::stable::Tensor const& b_scales,
+                         torch::stable::Tensor const& expert_offsets,
+                         torch::stable::Tensor const& problem_sizes,
+                         torch::stable::Tensor const& a_strides,
+                         torch::stable::Tensor const& b_strides,
+                         torch::stable::Tensor const& c_strides,
+                         bool per_act_token, bool per_out_ch) {
   dispatch_moe_mm_sm90(out_tensors, a_tensors, b_tensors, a_scales, b_scales,
                        expert_offsets, problem_sizes, a_strides, b_strides,
                        c_strides, per_act_token, per_out_ch);

csrc/libtorch_stable/quantization/w8a8/cutlass/moe/moe_data.cu

@@ -1,9 +1,11 @@
 #include <cudaTypedefs.h>
 
-#include <c10/cuda/CUDAGuard.h>
-#include <torch/all.h>
+#include "libtorch_stable/torch_utils.h"
+#include <torch/csrc/stable/tensor.h>
+#include <torch/csrc/stable/ops.h>
+#include <torch/headeronly/core/ScalarType.h>
 
-#include "dispatch_utils.h"
+#include "libtorch_stable/dispatch_utils.h"
 
 #include <iostream>
 
@@ -110,19 +112,22 @@ __global__ void compute_arg_sorts(const int32_t* __restrict__ topk_ids,
 }
 
 namespace {
-inline void launch_compute_problem_sizes(
-    const torch::Tensor& topk_ids, torch::Tensor& problem_sizes1,
-    torch::Tensor& problem_sizes2, torch::Tensor& atomic_buffer,
-    int64_t num_experts, int64_t n, int64_t k, cudaStream_t stream,
-    const bool swap_ab, const bool is_gated) {
+inline void launch_compute_problem_sizes(const torch::stable::Tensor& topk_ids,
+                                         torch::stable::Tensor& problem_sizes1,
+                                         torch::stable::Tensor& problem_sizes2,
+                                         torch::stable::Tensor& atomic_buffer,
+                                         int64_t num_experts, int64_t n,
+                                         int64_t k, cudaStream_t stream,
+                                         const bool swap_ab,
+                                         const bool is_gated) {
   int num_threads = min(THREADS_PER_EXPERT, topk_ids.numel());
 
-  auto const* topk_ptr = topk_ids.data_ptr<int32_t>();
-  auto* ps1_ptr = problem_sizes1.data_ptr<int32_t>();
-  auto* ps2_ptr = problem_sizes2.data_ptr<int32_t>();
-  auto* atomic_ptr = atomic_buffer.data_ptr<int32_t>();
+  auto const* topk_ptr = topk_ids.const_data_ptr<int32_t>();
+  auto* ps1_ptr = problem_sizes1.mutable_data_ptr<int32_t>();
+  auto* ps2_ptr = problem_sizes2.mutable_data_ptr<int32_t>();
+  auto* atomic_ptr = atomic_buffer.mutable_data_ptr<int32_t>();
 
-  VLLM_DISPATCH_BOOL(swap_ab, SwapAB, [&] {
+  VLLM_STABLE_DISPATCH_BOOL(swap_ab, SwapAB, [&] {
     compute_problem_sizes<SwapAB><<<num_experts, num_threads, 0, stream>>>(
         topk_ptr, ps1_ptr, ps2_ptr, atomic_ptr,
         static_cast<int>(topk_ids.numel()), static_cast<int>(n),
@@ -171,46 +176,53 @@ __global__ void compute_problem_sizes_from_expert_offsets(
 }
 
 void get_cutlass_moe_mm_problem_sizes_from_expert_offsets_caller(
-    const torch::Tensor& expert_first_token_offset,
-    torch::Tensor& problem_sizes1, torch::Tensor& problem_sizes2,
-    const int64_t n, const int64_t k, const bool swap_ab) {
-  TORCH_CHECK(expert_first_token_offset.is_cuda(),
-              "expert_first_token_offset must be a CUDA tensor");
-  TORCH_CHECK(expert_first_token_offset.dtype() == torch::kInt64,
-              "expert_first_token_offset must be int64");
+    const torch::stable::Tensor& expert_first_token_offset,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2, const int64_t n, const int64_t k,
+    const bool swap_ab) {
+  STD_TORCH_CHECK(expert_first_token_offset.is_cuda(),
+                  "expert_first_token_offset must be a CUDA tensor");
+  STD_TORCH_CHECK(expert_first_token_offset.scalar_type() ==
+                      torch::headeronly::ScalarType::Long,
+                  "expert_first_token_offset must be int64");
 
-  TORCH_CHECK(problem_sizes1.is_cuda() && problem_sizes2.is_cuda(),
-              "problem_sizes must be CUDA tensors");
-  TORCH_CHECK(problem_sizes1.dtype() == torch::kInt32 &&
-                  problem_sizes2.dtype() == torch::kInt32,
-              "problem_sizes must be int32");
-  TORCH_CHECK(problem_sizes1.is_contiguous() && problem_sizes2.is_contiguous(),
-              "problem_sizes must be contiguous");
-  TORCH_CHECK(problem_sizes1.dim() == 2 && problem_sizes2.dim() == 2,
-              "problem_sizes must be 2D tensors");
-  TORCH_CHECK(problem_sizes1.size(1) == 3 && problem_sizes2.size(1) == 3,
-              "problem_sizes second dim must be 3");
-  TORCH_CHECK(problem_sizes1.sizes() == problem_sizes2.sizes(),
-              "problem_sizes1 and problem_sizes2 must have same shape");
+  STD_TORCH_CHECK(problem_sizes1.is_cuda() && problem_sizes2.is_cuda(),
+                  "problem_sizes must be CUDA tensors");
+  STD_TORCH_CHECK(
+      problem_sizes1.scalar_type() == torch::headeronly::ScalarType::Int &&
+          problem_sizes2.scalar_type() == torch::headeronly::ScalarType::Int,
+      "problem_sizes must be int32");
+  STD_TORCH_CHECK(
+      problem_sizes1.is_contiguous() && problem_sizes2.is_contiguous(),
+      "problem_sizes must be contiguous");
+  STD_TORCH_CHECK(problem_sizes1.dim() == 2 && problem_sizes2.dim() == 2,
+                  "problem_sizes must be 2D tensors");
+  STD_TORCH_CHECK(problem_sizes1.size(1) == 3 && problem_sizes2.size(1) == 3,
+                  "problem_sizes second dim must be 3");
+  STD_TORCH_CHECK(problem_sizes1.size(0) == problem_sizes2.size(0) &&
+                      problem_sizes1.size(1) == problem_sizes2.size(1),
+                  "problem_sizes1 and problem_sizes2 must have same shape");
 
   int64_t const num_experts64 = problem_sizes1.size(0);
-  TORCH_CHECK(expert_first_token_offset.numel() == num_experts64 + 1,
-              "expert_first_token_offset must have num_experts + 1 elements");
-  TORCH_CHECK(num_experts64 <= INT32_MAX, "num_experts must fit in int32");
-  TORCH_CHECK(n <= INT32_MAX && k <= INT32_MAX, "n and k must fit in int32");
+  STD_TORCH_CHECK(
+      expert_first_token_offset.numel() == num_experts64 + 1,
+      "expert_first_token_offset must have num_experts + 1 elements");
+  STD_TORCH_CHECK(num_experts64 <= INT32_MAX, "num_experts must fit in int32");
+  STD_TORCH_CHECK(n <= INT32_MAX && k <= INT32_MAX,
+                  "n and k must fit in int32");
 
   int const num_experts = static_cast<int>(num_experts64);
-  auto stream = at::cuda::getCurrentCUDAStream(
-      expert_first_token_offset.device().index());
+  auto stream =
+      get_current_cuda_stream(expert_first_token_offset.get_device_index());
 
   int const threads = (num_experts < 256) ? num_experts : 256;
   int const blocks = (num_experts + threads - 1) / threads;
 
-  auto const* offsets_ptr = expert_first_token_offset.data_ptr<int64_t>();
-  auto* ps1_ptr = problem_sizes1.data_ptr<int32_t>();
-  auto* ps2_ptr = problem_sizes2.data_ptr<int32_t>();
+  auto const* offsets_ptr = expert_first_token_offset.const_data_ptr<int64_t>();
+  auto* ps1_ptr = problem_sizes1.mutable_data_ptr<int32_t>();
+  auto* ps2_ptr = problem_sizes2.mutable_data_ptr<int32_t>();
 
-  VLLM_DISPATCH_BOOL(swap_ab, SwapAB, [&] {
+  VLLM_STABLE_DISPATCH_BOOL(swap_ab, SwapAB, [&] {
     compute_problem_sizes_from_expert_offsets<SwapAB>
         <<<blocks, threads, 0, stream>>>(offsets_ptr, ps1_ptr, ps2_ptr,
                                          num_experts, static_cast<int>(n),
@@ -219,16 +231,19 @@ void get_cutlass_moe_mm_problem_sizes_from_expert_offsets_caller(
 }
 
 void get_cutlass_moe_mm_data_caller(
-    const torch::Tensor& topk_ids, torch::Tensor& expert_offsets,
-    torch::Tensor& problem_sizes1, torch::Tensor& problem_sizes2,
-    torch::Tensor& input_permutation, torch::Tensor& output_permutation,
-    const int64_t num_experts, const int64_t n, const int64_t k,
-    const std::optional<torch::Tensor>& blockscale_offsets,
+    const torch::stable::Tensor& topk_ids,
+    torch::stable::Tensor& expert_offsets,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2,
+    torch::stable::Tensor& input_permutation,
+    torch::stable::Tensor& output_permutation, const int64_t num_experts,
+    const int64_t n, const int64_t k,
+    const std::optional<torch::stable::Tensor>& blockscale_offsets,
     const bool is_gated) {
-  auto stream = at::cuda::getCurrentCUDAStream(topk_ids.device().index());
-  auto options_int32 =
-      torch::TensorOptions().dtype(torch::kInt32).device(topk_ids.device());
-  torch::Tensor atomic_buffer = torch::zeros(num_experts, options_int32);
+  auto device = topk_ids.device();
+  auto stream = get_current_cuda_stream(device.index());
+  torch::stable::Tensor atomic_buffer = torch::stable::new_zeros(
+      topk_ids, {num_experts}, torch::headeronly::ScalarType::Int);
 
   int num_threads = min(THREADS_PER_EXPERT, topk_ids.numel());
 
@@ -290,11 +305,13 @@ __global__ void compute_batched_moe_data(
 }
 
 void get_cutlass_batched_moe_mm_data_caller(
-    torch::Tensor& expert_offsets, torch::Tensor& problem_sizes1,
-    torch::Tensor& problem_sizes2, const torch::Tensor& expert_num_tokens,
+    torch::stable::Tensor& expert_offsets,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2,
+    const torch::stable::Tensor& expert_num_tokens,
     const int64_t num_local_experts, const int64_t padded_m, const int64_t n,
     const int64_t k) {
-  auto stream = at::cuda::getCurrentCUDAStream(expert_offsets.device().index());
+  auto stream = get_current_cuda_stream(expert_offsets.get_device_index());
 
   if (num_local_experts * padded_m > SWAP_AB_THRESHOLD) {
     compute_batched_moe_data<false><<<1, num_local_experts, 0, stream>>>(
@@ -311,4 +328,4 @@ void get_cutlass_batched_moe_mm_data_caller(
         static_cast<const int32_t*>(expert_num_tokens.data_ptr()), padded_m, n,
         k);
   }
-}
+}

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c2x.cu

@@ -0,0 +1,220 @@
+#include <stddef.h>
+#include <torch/csrc/stable/tensor.h>
+#include <torch/headeronly/core/ScalarType.h>
+#include "cutlass/cutlass.h"
+
+#include "scaled_mm_c2x.cuh"
+#include "scaled_mm_c2x_sm75_dispatch.cuh"
+#include "scaled_mm_c2x_sm80_dispatch.cuh"
+#include "scaled_mm_c2x_sm89_fp8_dispatch.cuh"
+#include "scaled_mm_c2x_sm89_int8_dispatch.cuh"
+
+#include "libtorch_stable/cutlass_extensions/epilogue/scaled_mm_epilogues_c2x.hpp"
+
+using namespace vllm;
+
+/*
+   This file defines quantized GEMM operations using the CUTLASS 2.x API, for
+   NVIDIA GPUs with SM versions prior to sm90 (Hopper).
+*/
+
+template <template <typename, typename> typename Epilogue,
+          typename... EpilogueArgs>
+void cutlass_scaled_mm_sm75_epilogue(torch::stable::Tensor& out,
+                                     torch::stable::Tensor const& a,
+                                     torch::stable::Tensor const& b,
+                                     EpilogueArgs&&... epilogue_args) {
+  STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
+  STD_TORCH_CHECK(b.scalar_type() == torch::headeronly::ScalarType::Char);
+
+  if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
+    return cutlass_gemm_sm75_dispatch<int8_t, cutlass::bfloat16_t, Epilogue>(
+        out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
+  } else {
+    STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
+    return cutlass_gemm_sm75_dispatch<int8_t, cutlass::half_t, Epilogue>(
+        out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
+  }
+}
+
+void cutlass_scaled_mm_sm75(torch::stable::Tensor& out,
+                            torch::stable::Tensor const& a,
+                            torch::stable::Tensor const& b,
+                            torch::stable::Tensor const& a_scales,
+                            torch::stable::Tensor const& b_scales,
+                            std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  if (bias) {
+    STD_TORCH_CHECK(bias->scalar_type() == out.scalar_type(),
+                    "currently bias dtype must match output dtype ",
+                    out.scalar_type());
+    return cutlass_scaled_mm_sm75_epilogue<c2x::ScaledEpilogueBias>(
+        out, a, b, a_scales, b_scales, *bias);
+  } else {
+    return cutlass_scaled_mm_sm75_epilogue<c2x::ScaledEpilogue>(
+        out, a, b, a_scales, b_scales);
+  }
+}
+
+void cutlass_scaled_mm_azp_sm75(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+
+  if (azp) {
+    return cutlass_scaled_mm_sm75_epilogue<c2x::ScaledEpilogueBiasAzpToken>(
+        out, a, b, a_scales, b_scales, azp_adj, *azp, bias);
+  } else {
+    return cutlass_scaled_mm_sm75_epilogue<c2x::ScaledEpilogueBiasAzp>(
+        out, a, b, a_scales, b_scales, azp_adj, bias);
+  }
+}
+
+template <template <typename, typename> typename Epilogue,
+          typename... EpilogueArgs>
+void cutlass_scaled_mm_sm80_epilogue(torch::stable::Tensor& out,
+                                     torch::stable::Tensor const& a,
+                                     torch::stable::Tensor const& b,
+                                     EpilogueArgs&&... epilogue_args) {
+  STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
+  STD_TORCH_CHECK(b.scalar_type() == torch::headeronly::ScalarType::Char);
+
+  if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
+    return cutlass_gemm_sm80_dispatch<int8_t, cutlass::bfloat16_t, Epilogue>(
+        out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
+  } else {
+    STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
+    return cutlass_gemm_sm80_dispatch<int8_t, cutlass::half_t, Epilogue>(
+        out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
+  }
+}
+
+void cutlass_scaled_mm_sm80(torch::stable::Tensor& out,
+                            torch::stable::Tensor const& a,
+                            torch::stable::Tensor const& b,
+                            torch::stable::Tensor const& a_scales,
+                            torch::stable::Tensor const& b_scales,
+                            std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  if (bias) {
+    STD_TORCH_CHECK(bias->scalar_type() == out.scalar_type(),
+                    "currently bias dtype must match output dtype ",
+                    out.scalar_type());
+    return cutlass_scaled_mm_sm80_epilogue<c2x::ScaledEpilogueBias>(
+        out, a, b, a_scales, b_scales, *bias);
+  } else {
+    return cutlass_scaled_mm_sm80_epilogue<c2x::ScaledEpilogue>(
+        out, a, b, a_scales, b_scales);
+  }
+}
+
+void cutlass_scaled_mm_azp_sm80(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+
+  if (azp) {
+    return cutlass_scaled_mm_sm80_epilogue<c2x::ScaledEpilogueBiasAzpToken>(
+        out, a, b, a_scales, b_scales, azp_adj, *azp, bias);
+  } else {
+    return cutlass_scaled_mm_sm80_epilogue<c2x::ScaledEpilogueBiasAzp>(
+        out, a, b, a_scales, b_scales, azp_adj, bias);
+  }
+}
+
+template <template <typename, typename> typename Epilogue,
+          typename... EpilogueArgs>
+void cutlass_scaled_mm_sm89_epilogue(torch::stable::Tensor& out,
+                                     torch::stable::Tensor const& a,
+                                     torch::stable::Tensor const& b,
+                                     EpilogueArgs&&... epilogue_args) {
+  if (a.scalar_type() == torch::headeronly::ScalarType::Char) {
+    STD_TORCH_CHECK(b.scalar_type() == torch::headeronly::ScalarType::Char);
+
+    if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
+      return cutlass_gemm_sm89_int8_dispatch<int8_t, cutlass::bfloat16_t,
+                                             Epilogue>(
+          out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
+    } else {
+      assert(out.scalar_type() == torch::headeronly::ScalarType::Half);
+      return cutlass_gemm_sm89_int8_dispatch<int8_t, cutlass::half_t, Epilogue>(
+          out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
+    }
+  } else {
+    STD_TORCH_CHECK(a.scalar_type() ==
+                    torch::headeronly::ScalarType::Float8_e4m3fn);
+    STD_TORCH_CHECK(b.scalar_type() ==
+                    torch::headeronly::ScalarType::Float8_e4m3fn);
+
+    if (out.scalar_type() == torch::headeronly::ScalarType::BFloat16) {
+      return cutlass_gemm_sm89_fp8_dispatch<cutlass::float_e4m3_t,
+                                            cutlass::bfloat16_t, Epilogue>(
+          out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
+    } else {
+      STD_TORCH_CHECK(out.scalar_type() == torch::headeronly::ScalarType::Half);
+      return cutlass_gemm_sm89_fp8_dispatch<cutlass::float_e4m3_t,
+                                            cutlass::half_t, Epilogue>(
+          out, a, b, std::forward<EpilogueArgs>(epilogue_args)...);
+    }
+  }
+}
+
+void cutlass_scaled_mm_sm89(torch::stable::Tensor& out,
+                            torch::stable::Tensor const& a,
+                            torch::stable::Tensor const& b,
+                            torch::stable::Tensor const& a_scales,
+                            torch::stable::Tensor const& b_scales,
+                            std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  if (bias) {
+    STD_TORCH_CHECK(bias->scalar_type() == out.scalar_type(),
+                    "currently bias dtype must match output dtype ",
+                    out.scalar_type());
+    return cutlass_scaled_mm_sm89_epilogue<c2x::ScaledEpilogueBias>(
+        out, a, b, a_scales, b_scales, *bias);
+  } else {
+    return cutlass_scaled_mm_sm89_epilogue<c2x::ScaledEpilogue>(
+        out, a, b, a_scales, b_scales);
+  }
+}
+
+void cutlass_scaled_mm_azp_sm89(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+
+  if (azp) {
+    return cutlass_scaled_mm_sm89_epilogue<c2x::ScaledEpilogueBiasAzpToken>(
+        out, a, b, a_scales, b_scales, azp_adj, *azp, bias);
+  } else {
+    return cutlass_scaled_mm_sm89_epilogue<c2x::ScaledEpilogueBiasAzp>(
+        out, a, b, a_scales, b_scales, azp_adj, bias);
+  }
+}

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c2x.cuh

@@ -1,8 +1,9 @@
 #pragma once
 #include <stddef.h>
-#include <torch/all.h>
+#include <torch/csrc/stable/tensor.h>
+#include <torch/csrc/stable/ops.h>
 
-#include <ATen/cuda/CUDAContext.h>
+#include "libtorch_stable/torch_utils.h"
 
 // clang-format will break include orders
 // clang-format off
@@ -95,8 +96,9 @@ struct cutlass_2x_gemm {
 };
 
 template <typename Gemm, typename... EpilogueArgs>
-inline void cutlass_gemm_caller(torch::Tensor& out, torch::Tensor const& a,
-                                torch::Tensor const& b,
+inline void cutlass_gemm_caller(torch::stable::Tensor& out,
+                                torch::stable::Tensor const& a,
+                                torch::stable::Tensor const& b,
                                 EpilogueArgs&&... epilogue_params) {
   using ElementAB = typename Gemm::ElementAB;
   using ElementD = typename Gemm::ElementD;
@@ -149,11 +151,12 @@ inline void cutlass_gemm_caller(torch::Tensor& out, torch::Tensor const& a,
   // Launch the CUTLASS GEMM kernel.
   typename Gemm::Op gemm_op;
   size_t workspace_size = gemm_op.get_workspace_size(args);
-  auto const workspace_options =
-      torch::TensorOptions().dtype(torch::kUInt8).device(a.device());
-  auto workspace = torch::empty(workspace_size, workspace_options);
+  auto device = a.device();
+  auto workspace =
+      torch::stable::empty(workspace_size, torch::headeronly::ScalarType::Byte,
+                           std::nullopt, device);
 
-  auto stream = at::cuda::getCurrentCUDAStream(a.get_device());
+  auto stream = get_current_cuda_stream(device.index());
 
   CUTLASS_CHECK(gemm_op.can_implement(args));
   cutlass::Status status = gemm_op(args, workspace.data_ptr(), stream);
@@ -161,9 +164,9 @@ inline void cutlass_gemm_caller(torch::Tensor& out, torch::Tensor const& a,
 }
 
 template <typename Gemm, typename FallbackGemm, typename... EpilogueArgs>
-inline void fallback_cutlass_gemm_caller(torch::Tensor& out,
-                                         torch::Tensor const& a,
-                                         torch::Tensor const& b,
+inline void fallback_cutlass_gemm_caller(torch::stable::Tensor& out,
+                                         torch::stable::Tensor const& a,
+                                         torch::stable::Tensor const& b,
                                          EpilogueArgs&&... args) {
   // In some cases, the GPU isn't able to accommodate the
   // shared memory requirements of the Gemm. In such cases, use
@@ -180,8 +183,8 @@ inline void fallback_cutlass_gemm_caller(torch::Tensor& out,
     return cutlass_gemm_caller<Gemm>(out, a, b,
                                      std::forward<EpilogueArgs>(args)...);
   } else {
-    TORCH_CHECK(fallback_gemm_shared_mem_size <=
-                max_shared_mem_per_block_opt_in);
+    STD_TORCH_CHECK(fallback_gemm_shared_mem_size <=
+                    max_shared_mem_per_block_opt_in);
     return cutlass_gemm_caller<FallbackGemm>(
         out, a, b, std::forward<EpilogueArgs>(args)...);
   }

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c2x_sm75_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "scaled_mm_c2x.cuh"
 
 /**
@@ -70,13 +72,13 @@ struct sm75_config_M32 {
 template <typename InType, typename OutType,
           template <typename, typename> typename Epilogue,
           typename... EpilogueArgs>
-inline void cutlass_gemm_sm75_dispatch(torch::Tensor& out,
-                                       torch::Tensor const& a,
-                                       torch::Tensor const& b,
+inline void cutlass_gemm_sm75_dispatch(torch::stable::Tensor& out,
+                                       torch::stable::Tensor const& a,
+                                       torch::stable::Tensor const& b,
                                        EpilogueArgs&&... args) {
   static_assert(std::is_same<InType, int8_t>());
-  TORCH_CHECK(a.dtype() == torch::kInt8);
-  TORCH_CHECK(b.dtype() == torch::kInt8);
+  STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
+  STD_TORCH_CHECK(b.scalar_type() == torch::headeronly::ScalarType::Char);
 
   using Cutlass2xGemmDefault =
       typename sm75_config_default<InType, OutType, Epilogue>::Cutlass2xGemm;

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c2x_sm80_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "scaled_mm_c2x.cuh"
 
 /**
@@ -72,13 +74,13 @@ struct sm80_config_M16 {
 template <typename InType, typename OutType,
           template <typename, typename> typename Epilogue,
           typename... EpilogueArgs>
-inline void cutlass_gemm_sm80_dispatch(torch::Tensor& out,
-                                       torch::Tensor const& a,
-                                       torch::Tensor const& b,
+inline void cutlass_gemm_sm80_dispatch(torch::stable::Tensor& out,
+                                       torch::stable::Tensor const& a,
+                                       torch::stable::Tensor const& b,
                                        EpilogueArgs&&... args) {
   static_assert(std::is_same<InType, int8_t>());
-  TORCH_CHECK(a.dtype() == torch::kInt8);
-  TORCH_CHECK(b.dtype() == torch::kInt8);
+  STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
+  STD_TORCH_CHECK(b.scalar_type() == torch::headeronly::ScalarType::Char);
 
   using Cutlass2xGemmDefault =
       typename sm80_config_default<InType, OutType, Epilogue>::Cutlass2xGemm;

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c2x_sm89_fp8_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "scaled_mm_c2x.cuh"
 #include "cutlass/float8.h"
 
@@ -34,10 +36,12 @@ struct sm89_fp8_config_default {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-    TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
+    STD_TORCH_CHECK(a.scalar_type() ==
+                    torch::headeronly::ScalarType::Float8_e4m3fn);
 
     using FallbackGemm =
         typename sm89_fp8_fallback_gemm<InType, OutType,
@@ -84,10 +88,12 @@ struct sm89_fp8_config_M256 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-    TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
+    STD_TORCH_CHECK(a.scalar_type() ==
+                    torch::headeronly::ScalarType::Float8_e4m3fn);
 
     using FallbackGemm =
         typename sm89_fp8_fallback_gemm<InType, OutType,
@@ -125,10 +131,12 @@ struct sm89_fp8_config_M128 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-    TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
+    STD_TORCH_CHECK(a.scalar_type() ==
+                    torch::headeronly::ScalarType::Float8_e4m3fn);
 
     using FallbackGemm =
         typename sm89_fp8_fallback_gemm<InType, OutType,
@@ -173,10 +181,12 @@ struct sm89_fp8_config_M64 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-    TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
+    STD_TORCH_CHECK(a.scalar_type() ==
+                    torch::headeronly::ScalarType::Float8_e4m3fn);
 
     using FallbackGemm =
         typename sm89_fp8_fallback_gemm<InType, OutType,
@@ -227,10 +237,12 @@ struct sm89_fp8_config_M32 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-    TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
+    STD_TORCH_CHECK(a.scalar_type() ==
+                    torch::headeronly::ScalarType::Float8_e4m3fn);
 
     using FallbackGemm =
         typename sm89_fp8_fallback_gemm<InType, OutType,
@@ -280,10 +292,12 @@ struct sm89_fp8_config_M16 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-    TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
+    STD_TORCH_CHECK(a.scalar_type() ==
+                    torch::headeronly::ScalarType::Float8_e4m3fn);
 
     using FallbackGemm =
         typename sm89_fp8_fallback_gemm<InType, OutType,
@@ -326,13 +340,15 @@ struct sm89_fp8_config_M16 {
 template <typename InType, typename OutType,
           template <typename, typename> typename Epilogue,
           typename... EpilogueArgs>
-inline void cutlass_gemm_sm89_fp8_dispatch(torch::Tensor& out,
-                                           torch::Tensor const& a,
-                                           torch::Tensor const& b,
+inline void cutlass_gemm_sm89_fp8_dispatch(torch::stable::Tensor& out,
+                                           torch::stable::Tensor const& a,
+                                           torch::stable::Tensor const& b,
                                            EpilogueArgs&&... args) {
   static_assert(std::is_same<InType, cutlass::float_e4m3_t>());
-  TORCH_CHECK(a.dtype() == torch::kFloat8_e4m3fn);
-  TORCH_CHECK(b.dtype() == torch::kFloat8_e4m3fn);
+  STD_TORCH_CHECK(a.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
+  STD_TORCH_CHECK(b.scalar_type() ==
+                  torch::headeronly::ScalarType::Float8_e4m3fn);
 
   uint32_t const m = a.size(0);
   uint32_t const mp2 =

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c2x_sm89_int8_dispatch.cuh

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <torch/headeronly/util/shim_utils.h>
+
 #include "scaled_mm_c2x.cuh"
 
 /**
@@ -32,10 +34,11 @@ struct sm89_int8_config_default {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, int8_t>());
-    TORCH_CHECK(a.dtype() == torch::kInt8);
+    STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
 
     using FallbackGemm =
         typename sm89_int8_fallback_gemm<InType, OutType,
@@ -88,10 +91,11 @@ struct sm89_int8_config_M256 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, int8_t>());
-    TORCH_CHECK(a.dtype() == torch::kInt8);
+    STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
 
     using FallbackGemm =
         typename sm89_int8_fallback_gemm<InType, OutType,
@@ -143,10 +147,11 @@ struct sm89_int8_config_M128 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, int8_t>());
-    TORCH_CHECK(a.dtype() == torch::kInt8);
+    STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
 
     using FallbackGemm =
         typename sm89_int8_fallback_gemm<InType, OutType,
@@ -193,10 +198,11 @@ struct sm89_int8_config_M64 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, int8_t>());
-    TORCH_CHECK(a.dtype() == torch::kInt8);
+    STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
 
     using FallbackGemm =
         typename sm89_int8_fallback_gemm<InType, OutType,
@@ -234,10 +240,11 @@ struct sm89_int8_config_M32 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, int8_t>());
-    TORCH_CHECK(a.dtype() == torch::kInt8);
+    STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
 
     using FallbackGemm =
         typename sm89_int8_fallback_gemm<InType, OutType,
@@ -276,10 +283,11 @@ struct sm89_int8_config_M16 {
   template <typename InType, typename OutType,
             template <typename, typename> typename Epilogue,
             typename... EpilogueArgs>
-  static void dispatch(torch::Tensor& out, torch::Tensor const& a,
-                       torch::Tensor const& b, EpilogueArgs&&... args) {
+  static void dispatch(torch::stable::Tensor& out,
+                       torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b, EpilogueArgs&&... args) {
     static_assert(std::is_same<InType, int8_t>());
-    TORCH_CHECK(a.dtype() == torch::kInt8);
+    STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
 
     using FallbackGemm =
         typename sm89_int8_fallback_gemm<InType, OutType,
@@ -311,13 +319,13 @@ struct sm89_int8_config_M16 {
 template <typename InType, typename OutType,
           template <typename, typename> typename Epilogue,
           typename... EpilogueArgs>
-inline void cutlass_gemm_sm89_int8_dispatch(torch::Tensor& out,
-                                            torch::Tensor const& a,
-                                            torch::Tensor const& b,
+inline void cutlass_gemm_sm89_int8_dispatch(torch::stable::Tensor& out,
+                                            torch::stable::Tensor const& a,
+                                            torch::stable::Tensor const& b,
                                             EpilogueArgs&&... args) {
   static_assert(std::is_same<InType, int8_t>());
-  TORCH_CHECK(a.dtype() == torch::kInt8);
-  TORCH_CHECK(b.dtype() == torch::kInt8);
+  STD_TORCH_CHECK(a.scalar_type() == torch::headeronly::ScalarType::Char);
+  STD_TORCH_CHECK(b.scalar_type() == torch::headeronly::ScalarType::Char);
 
   uint32_t const m = a.size(0);
   uint32_t const mp2 =

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c3x_sm100.cu

@@ -8,11 +8,12 @@
 
 #if defined ENABLE_SCALED_MM_SM100 && ENABLE_SCALED_MM_SM100
 
-void cutlass_scaled_mm_sm100(torch::Tensor& c, torch::Tensor const& a,
-                             torch::Tensor const& b,
-                             torch::Tensor const& a_scales,
-                             torch::Tensor const& b_scales,
-                             std::optional<torch::Tensor> const& bias) {
+void cutlass_scaled_mm_sm100(torch::stable::Tensor& c,
+                             torch::stable::Tensor const& a,
+                             torch::stable::Tensor const& b,
+                             torch::stable::Tensor const& a_scales,
+                             torch::stable::Tensor const& b_scales,
+                             std::optional<torch::stable::Tensor> const& bias) {
   dispatch_scaled_mm(c, a, b, a_scales, b_scales, bias,
                      vllm::cutlass_scaled_mm_sm100_fp8,
                      nullptr,  // int8 not supported on SM100

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c3x_sm120.cu

@@ -8,11 +8,12 @@
 
 #if defined ENABLE_SCALED_MM_SM120 && ENABLE_SCALED_MM_SM120
 
-void cutlass_scaled_mm_sm120(torch::Tensor& c, torch::Tensor const& a,
-                             torch::Tensor const& b,
-                             torch::Tensor const& a_scales,
-                             torch::Tensor const& b_scales,
-                             std::optional<torch::Tensor> const& bias) {
+void cutlass_scaled_mm_sm120(torch::stable::Tensor& c,
+                             torch::stable::Tensor const& a,
+                             torch::stable::Tensor const& b,
+                             torch::stable::Tensor const& a_scales,
+                             torch::stable::Tensor const& b_scales,
+                             std::optional<torch::stable::Tensor> const& bias) {
   dispatch_scaled_mm(c, a, b, a_scales, b_scales, bias,
                      vllm::cutlass_scaled_mm_sm120_fp8,
                      nullptr,  // int8 not supported on SM120

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_c3x_sm90.cu

@@ -0,0 +1,38 @@
+#include "c3x/scaled_mm_helper.hpp"
+#include "c3x/scaled_mm_kernels.hpp"
+
+/*
+   This file defines quantized GEMM operations using the CUTLASS 3.x API, for
+   NVIDIA GPUs with sm90a (Hopper).
+*/
+
+#if defined ENABLE_SCALED_MM_SM90 && ENABLE_SCALED_MM_SM90
+
+void cutlass_scaled_mm_sm90(torch::stable::Tensor& c,
+                            torch::stable::Tensor const& a,
+                            torch::stable::Tensor const& b,
+                            torch::stable::Tensor const& a_scales,
+                            torch::stable::Tensor const& b_scales,
+                            std::optional<torch::stable::Tensor> const& bias) {
+  dispatch_scaled_mm(c, a, b, a_scales, b_scales, bias,
+                     vllm::cutlass_scaled_mm_sm90_fp8,
+                     vllm::cutlass_scaled_mm_sm90_int8,
+                     vllm::cutlass_scaled_mm_blockwise_sm90_fp8);
+}
+
+void cutlass_scaled_mm_azp_sm90(
+    torch::stable::Tensor& out, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias) {
+  STD_TORCH_CHECK(a_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+  STD_TORCH_CHECK(b_scales.scalar_type() ==
+                  torch::headeronly::ScalarType::Float);
+
+  vllm::cutlass_scaled_mm_azp_sm90_int8(out, a, b, a_scales, b_scales, azp_adj,
+                                        azp, bias);
+}
+
+#endif

csrc/libtorch_stable/quantization/w8a8/cutlass/scaled_mm_entry.cu

@@ -0,0 +1,451 @@
+#include <cudaTypedefs.h>
+
+#include <torch/csrc/stable/tensor.h>
+
+#include "libtorch_stable/torch_utils.h"
+
+#include "cutlass_extensions/common.hpp"
+
+void cutlass_scaled_mm_sm75(torch::stable::Tensor& c,
+                            torch::stable::Tensor const& a,
+                            torch::stable::Tensor const& b,
+                            torch::stable::Tensor const& a_scales,
+                            torch::stable::Tensor const& b_scales,
+                            std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_scaled_mm_sm80(torch::stable::Tensor& c,
+                            torch::stable::Tensor const& a,
+                            torch::stable::Tensor const& b,
+                            torch::stable::Tensor const& a_scales,
+                            torch::stable::Tensor const& b_scales,
+                            std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_scaled_mm_sm89(torch::stable::Tensor& c,
+                            torch::stable::Tensor const& a,
+                            torch::stable::Tensor const& b,
+                            torch::stable::Tensor const& a_scales,
+                            torch::stable::Tensor const& b_scales,
+                            std::optional<torch::stable::Tensor> const& bias);
+
+#if defined ENABLE_SCALED_MM_SM90 && ENABLE_SCALED_MM_SM90
+void cutlass_scaled_mm_sm90(torch::stable::Tensor& c,
+                            torch::stable::Tensor const& a,
+                            torch::stable::Tensor const& b,
+                            torch::stable::Tensor const& a_scales,
+                            torch::stable::Tensor const& b_scales,
+                            std::optional<torch::stable::Tensor> const& bias);
+#endif
+#if defined ENABLE_CUTLASS_MOE_SM90 && ENABLE_CUTLASS_MOE_SM90
+void cutlass_moe_mm_sm90(torch::stable::Tensor& out_tensors,
+                         torch::stable::Tensor const& a_tensors,
+                         torch::stable::Tensor const& b_tensors,
+                         torch::stable::Tensor const& a_scales,
+                         torch::stable::Tensor const& b_scales,
+                         torch::stable::Tensor const& expert_offsets,
+                         torch::stable::Tensor const& problem_sizes,
+                         torch::stable::Tensor const& a_strides,
+                         torch::stable::Tensor const& b_strides,
+                         torch::stable::Tensor const& c_strides,
+                         bool per_act_token, bool per_out_ch);
+
+#endif
+
+#if defined ENABLE_CUTLASS_MOE_SM100 && ENABLE_CUTLASS_MOE_SM100
+void cutlass_moe_mm_sm100(torch::stable::Tensor& out_tensors,
+                          torch::stable::Tensor const& a_tensors,
+                          torch::stable::Tensor const& b_tensors,
+                          torch::stable::Tensor const& a_scales,
+                          torch::stable::Tensor const& b_scales,
+                          torch::stable::Tensor const& expert_offsets,
+                          torch::stable::Tensor const& problem_sizes,
+                          torch::stable::Tensor const& a_strides,
+                          torch::stable::Tensor const& b_strides,
+                          torch::stable::Tensor const& c_strides,
+                          bool per_act_token, bool per_out_ch);
+#endif
+
+#if defined ENABLE_SCALED_MM_SM120 && ENABLE_SCALED_MM_SM120
+void cutlass_scaled_mm_sm120(torch::stable::Tensor& c,
+                             torch::stable::Tensor const& a,
+                             torch::stable::Tensor const& b,
+                             torch::stable::Tensor const& a_scales,
+                             torch::stable::Tensor const& b_scales,
+                             std::optional<torch::stable::Tensor> const& bias);
+#endif
+
+#if defined ENABLE_SCALED_MM_SM100 && ENABLE_SCALED_MM_SM100
+void cutlass_scaled_mm_sm100(torch::stable::Tensor& c,
+                             torch::stable::Tensor const& a,
+                             torch::stable::Tensor const& b,
+                             torch::stable::Tensor const& a_scales,
+                             torch::stable::Tensor const& b_scales,
+                             std::optional<torch::stable::Tensor> const& bias);
+#endif
+
+#if (defined(ENABLE_CUTLASS_MOE_SM90) && ENABLE_CUTLASS_MOE_SM90) ||   \
+    (defined(ENABLE_CUTLASS_MOE_SM100) && ENABLE_CUTLASS_MOE_SM100) || \
+    (defined(ENABLE_CUTLASS_MOE_SM120) && ENABLE_CUTLASS_MOE_SM120)
+void get_cutlass_moe_mm_data_caller(
+    const torch::stable::Tensor& topk_ids,
+    torch::stable::Tensor& expert_offsets,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2,
+    torch::stable::Tensor& input_permutation,
+    torch::stable::Tensor& output_permutation, const int64_t num_experts,
+    const int64_t n, const int64_t k,
+    const std::optional<torch::stable::Tensor>& blockscale_offsets,
+    const bool is_gated);
+
+void get_cutlass_moe_mm_problem_sizes_from_expert_offsets_caller(
+    const torch::stable::Tensor& expert_first_token_offset,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2, const int64_t n, const int64_t k,
+    const bool swap_ab);
+
+void get_cutlass_batched_moe_mm_data_caller(
+    torch::stable::Tensor& expert_offsets,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2,
+    const torch::stable::Tensor& expert_num_tokens,
+    const int64_t num_local_experts, const int64_t padded_m, const int64_t n,
+    const int64_t k);
+#endif
+
+void cutlass_scaled_mm_azp_sm75(
+    torch::stable::Tensor& c, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_scaled_mm_azp_sm80(
+    torch::stable::Tensor& c, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias);
+
+void cutlass_scaled_mm_azp_sm89(
+    torch::stable::Tensor& c, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias);
+
+#if defined ENABLE_SCALED_MM_SM90 && ENABLE_SCALED_MM_SM90
+void cutlass_scaled_mm_azp_sm90(
+    torch::stable::Tensor& c, torch::stable::Tensor const& a,
+    torch::stable::Tensor const& b, torch::stable::Tensor const& a_scales,
+    torch::stable::Tensor const& b_scales, torch::stable::Tensor const& azp_adj,
+    std::optional<torch::stable::Tensor> const& azp,
+    std::optional<torch::stable::Tensor> const& bias);
+#endif
+
+bool cutlass_scaled_mm_supports_fp8(int64_t cuda_device_capability) {
+  // CUTLASS FP8 kernels need at least
+  //   CUDA 12.0 on SM90 systems (Hopper)
+  //   CUDA 12.4 on SM89 systems (Lovelace)
+
+#if defined CUDA_VERSION
+  if (cuda_device_capability >= 90) {
+    return CUDA_VERSION >= 12000;
+  } else if (cuda_device_capability >= 89) {
+    return CUDA_VERSION >= 12040;
+  }
+#endif
+
+  return false;
+}
+
+bool cutlass_scaled_mm_supports_block_fp8(int64_t cuda_device_capability) {
+  // CUTLASS block-quantized FP8 kernels need at least CUDA 12.0
+  // and at least SM90 (Hopper)
+
+#if defined CUDA_VERSION
+  if (cuda_device_capability >= 100) {
+    return CUDA_VERSION >= 12080;
+  } else if (cuda_device_capability >= 90) {
+    return CUDA_VERSION >= 12000;
+  }
+#endif
+
+  return false;
+}
+
+bool cutlass_group_gemm_supported(int64_t cuda_device_capability) {
+  // CUTLASS grouped FP8 kernels need at least CUDA 12.3 and SM90 (Hopper)
+  // or CUDA 12.8 and SM100 (Blackwell)
+
+#if defined CUDA_VERSION
+  if (cuda_device_capability >= 100) {
+    return CUDA_VERSION >= 12080;
+  }
+  if (cuda_device_capability >= 90) {
+    return CUDA_VERSION >= 12030;
+  }
+#endif
+
+  return false;
+}
+
+void cutlass_scaled_mm(torch::stable::Tensor& c, torch::stable::Tensor const& a,
+                       torch::stable::Tensor const& b,
+                       torch::stable::Tensor const& a_scales,
+                       torch::stable::Tensor const& b_scales,
+                       std::optional<torch::stable::Tensor> const& bias) {
+  // Checks for conformality
+  STD_TORCH_CHECK(a.dim() == 2 && b.dim() == 2 && c.dim() == 2);
+  STD_TORCH_CHECK(c.size(0) == a.size(0) && a.size(1) == b.size(0) &&
+                  b.size(1) == c.size(1));
+
+  // Check for strides and alignment
+  STD_TORCH_CHECK(a.stride(1) == 1 && c.stride(1) == 1);  // Row-major
+  STD_TORCH_CHECK(b.stride(0) == 1);                      // Column-major
+  STD_TORCH_CHECK(c.stride(0) % 16 == 0 &&
+                  b.stride(1) % 16 == 0);  // 16 Byte Alignment
+
+  if (bias) {
+    STD_TORCH_CHECK(bias->numel() == b.size(1) && bias->is_contiguous() &&
+                    bias->dim() == 1);
+  }
+
+  const torch::stable::accelerator::DeviceGuard device_guard(
+      a.get_device_index());
+  int32_t version_num = get_sm_version_num();
+
+#if defined ENABLE_SCALED_MM_SM120 && ENABLE_SCALED_MM_SM120
+  if (version_num >= 120) {
+    cutlass_scaled_mm_sm120(c, a, b, a_scales, b_scales, bias);
+    return;
+  }
+#endif
+
+#if defined ENABLE_SCALED_MM_SM100 && ENABLE_SCALED_MM_SM100
+  if (version_num >= 100 && version_num < 120) {
+    cutlass_scaled_mm_sm100(c, a, b, a_scales, b_scales, bias);
+    return;
+  }
+#endif
+
+  // Guard against compilation issues for sm90 kernels
+#if defined ENABLE_SCALED_MM_SM90 && ENABLE_SCALED_MM_SM90
+  if (version_num >= 90 && version_num < 100) {
+    // Hopper
+    cutlass_scaled_mm_sm90(c, a, b, a_scales, b_scales, bias);
+    return;
+  }
+#endif
+
+#if defined ENABLE_SCALED_MM_C2X && ENABLE_SCALED_MM_C2X
+  if (version_num == 89) {
+    // Ada Lovelace
+    cutlass_scaled_mm_sm89(c, a, b, a_scales, b_scales, bias);
+    return;
+  }
+
+  if (version_num >= 80) {
+    // Ampere
+    cutlass_scaled_mm_sm80(c, a, b, a_scales, b_scales, bias);
+    return;
+  }
+
+  if (version_num >= 75) {
+    // Turing
+    cutlass_scaled_mm_sm75(c, a, b, a_scales, b_scales, bias);
+    return;
+  }
+#endif
+
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false,
+      "No compiled cutlass_scaled_mm for a compute capability less than "
+      "CUDA device capability: ",
+      version_num);
+}
+
+void cutlass_moe_mm(torch::stable::Tensor& out_tensors,
+                    torch::stable::Tensor const& a_tensors,
+                    torch::stable::Tensor const& b_tensors,
+                    torch::stable::Tensor const& a_scales,
+                    torch::stable::Tensor const& b_scales,
+                    torch::stable::Tensor const& expert_offsets,
+                    torch::stable::Tensor const& problem_sizes,
+                    torch::stable::Tensor const& a_strides,
+                    torch::stable::Tensor const& b_strides,
+                    torch::stable::Tensor const& c_strides, bool per_act_token,
+                    bool per_out_ch) {
+  int32_t version_num = get_sm_version_num();
+#if defined ENABLE_CUTLASS_MOE_SM100 && ENABLE_CUTLASS_MOE_SM100
+  if (version_num >= 100 && version_num < 110) {
+    cutlass_moe_mm_sm100(out_tensors, a_tensors, b_tensors, a_scales, b_scales,
+                         expert_offsets, problem_sizes, a_strides, b_strides,
+                         c_strides, per_act_token, per_out_ch);
+    return;
+  }
+#endif
+#if defined ENABLE_CUTLASS_MOE_SM90 && ENABLE_CUTLASS_MOE_SM90
+  if (version_num >= 90 && version_num < 100) {
+    cutlass_moe_mm_sm90(out_tensors, a_tensors, b_tensors, a_scales, b_scales,
+                        expert_offsets, problem_sizes, a_strides, b_strides,
+                        c_strides, per_act_token, per_out_ch);
+    return;
+  }
+#endif
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false,
+      "No compiled cutlass_scaled_mm for CUDA device capability: ", version_num,
+      ". Required capability: 90 or 100");
+}
+
+void get_cutlass_moe_mm_data(
+    const torch::stable::Tensor& topk_ids,
+    torch::stable::Tensor& expert_offsets,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2,
+    torch::stable::Tensor& input_permutation,
+    torch::stable::Tensor& output_permutation, const int64_t num_experts,
+    const int64_t n, const int64_t k,
+    const std::optional<torch::stable::Tensor>& blockscale_offsets,
+    const bool is_gated) {
+  // This function currently gets compiled only if we have a valid cutlass moe
+  // mm to run it for.
+  int32_t version_num = get_sm_version_num();
+#if (defined ENABLE_CUTLASS_MOE_SM90 && ENABLE_CUTLASS_MOE_SM90) ||   \
+    (defined ENABLE_CUTLASS_MOE_SM100 && ENABLE_CUTLASS_MOE_SM100) || \
+    (defined ENABLE_CUTLASS_MOE_SM120 && ENABLE_CUTLASS_MOE_SM120)
+  get_cutlass_moe_mm_data_caller(topk_ids, expert_offsets, problem_sizes1,
+                                 problem_sizes2, input_permutation,
+                                 output_permutation, num_experts, n, k,
+                                 blockscale_offsets, is_gated);
+  return;
+#endif
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false,
+      "No compiled get_cutlass_moe_mm_data: no cutlass_scaled_mm kernel for "
+      "CUDA device capability: ",
+      version_num, ". Required capability: 90, 100, or 120");
+}
+
+void get_cutlass_moe_mm_problem_sizes_from_expert_offsets(
+    const torch::stable::Tensor& expert_first_token_offset,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2, const int64_t n, const int64_t k,
+    const bool swap_ab) {
+  int32_t version_num = get_sm_version_num();
+#if (defined ENABLE_CUTLASS_MOE_SM90 && ENABLE_CUTLASS_MOE_SM90) ||   \
+    (defined ENABLE_CUTLASS_MOE_SM100 && ENABLE_CUTLASS_MOE_SM100) || \
+    (defined ENABLE_CUTLASS_MOE_SM120 && ENABLE_CUTLASS_MOE_SM120)
+  get_cutlass_moe_mm_problem_sizes_from_expert_offsets_caller(
+      expert_first_token_offset, problem_sizes1, problem_sizes2, n, k, swap_ab);
+  return;
+#endif
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false,
+      "No compiled get_cutlass_moe_mm_problem_sizes_from_expert_offsets: "
+      "no cutlass_scaled_mm kernel for CUDA device capability: ",
+      version_num, ". Required capability: 90, 100, or 120");
+}
+
+void get_cutlass_batched_moe_mm_data(
+    torch::stable::Tensor& expert_offsets,
+    torch::stable::Tensor& problem_sizes1,
+    torch::stable::Tensor& problem_sizes2,
+    const torch::stable::Tensor& expert_num_tokens,
+    const int64_t num_local_experts, const int64_t padded_m, const int64_t n,
+    const int64_t k) {
+  // This function currently gets compiled only if we have a valid cutlass moe
+  // mm to run it for.
+  int32_t version_num = get_sm_version_num();
+#if (defined ENABLE_CUTLASS_MOE_SM90 && ENABLE_CUTLASS_MOE_SM90) ||   \
+    (defined ENABLE_CUTLASS_MOE_SM100 && ENABLE_CUTLASS_MOE_SM100) || \
+    (defined ENABLE_CUTLASS_MOE_SM120 && ENABLE_CUTLASS_MOE_SM120)
+  get_cutlass_batched_moe_mm_data_caller(expert_offsets, problem_sizes1,
+                                         problem_sizes2, expert_num_tokens,
+                                         num_local_experts, padded_m, n, k);
+  return;
+#endif
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false,
+      "No compiled get_cutlass_batched_moe_mm_data: no "
+      "cutlass_scaled_mm kernel "
+      "for CUDA device capability: ",
+      version_num, ". Required capability: 90, 100, or 120");
+}
+
+void cutlass_scaled_mm_azp(torch::stable::Tensor& c,
+                           torch::stable::Tensor const& a,
+                           torch::stable::Tensor const& b,
+                           torch::stable::Tensor const& a_scales,
+                           torch::stable::Tensor const& b_scales,
+                           torch::stable::Tensor const& azp_adj,
+                           std::optional<torch::stable::Tensor> const& azp,
+                           std::optional<torch::stable::Tensor> const& bias) {
+  // Checks for conformality
+  STD_TORCH_CHECK(a.dim() == 2 && b.dim() == 2 && c.dim() == 2);
+  STD_TORCH_CHECK(c.size(0) == a.size(0) && a.size(1) == b.size(0) &&
+                  b.size(1) == c.size(1));
+  STD_TORCH_CHECK(a_scales.numel() == 1 || a_scales.numel() == a.size(0));
+  STD_TORCH_CHECK(b_scales.numel() == 1 || b_scales.numel() == b.size(1));
+
+  // Check for strides and alignment
+  STD_TORCH_CHECK(a.stride(1) == 1 && c.stride(1) == 1);  // Row-major
+  STD_TORCH_CHECK(b.stride(0) == 1);                      // Column-major
+  STD_TORCH_CHECK(c.stride(0) % 16 == 0 &&
+                  b.stride(1) % 16 == 0);  // 16 Byte Alignment
+  STD_TORCH_CHECK(a_scales.is_contiguous() && b_scales.is_contiguous());
+
+  // bias, azp, azp_adj are all 1d
+  // bias and azp_adj have n elements, azp has m elements
+  if (bias) {
+    STD_TORCH_CHECK(bias->numel() == b.size(1) && bias->is_contiguous());
+  }
+  if (azp) {
+    STD_TORCH_CHECK(azp->numel() == a.size(0) && azp->is_contiguous());
+  }
+  STD_TORCH_CHECK(azp_adj.numel() == b.size(1) && azp_adj.is_contiguous());
+
+  // azp & bias types
+  STD_TORCH_CHECK(azp_adj.scalar_type() == torch::headeronly::ScalarType::Int);
+  STD_TORCH_CHECK(!azp ||
+                  azp->scalar_type() == torch::headeronly::ScalarType::Int);
+  STD_TORCH_CHECK(!bias || bias->scalar_type() == c.scalar_type(),
+                  "currently bias dtype must match output dtype ",
+                  c.scalar_type());
+
+  const torch::stable::accelerator::DeviceGuard device_guard(
+      a.get_device_index());
+
+  int32_t version_num = get_sm_version_num();
+
+#if defined ENABLE_SCALED_MM_SM90 && ENABLE_SCALED_MM_SM90
+  if (version_num >= 90) {
+    cutlass_scaled_mm_azp_sm90(c, a, b, a_scales, b_scales, azp_adj, azp, bias);
+    return;
+  }
+#endif
+
+#if defined ENABLE_SCALED_MM_C2X && ENABLE_SCALED_MM_C2X
+  if (version_num == 89) {
+    // Ada Lovelace
+    cutlass_scaled_mm_azp_sm89(c, a, b, a_scales, b_scales, azp_adj, azp, bias);
+    return;
+  }
+
+  if (version_num >= 80) {
+    // Ampere
+    cutlass_scaled_mm_azp_sm80(c, a, b, a_scales, b_scales, azp_adj, azp, bias);
+    return;
+  }
+
+  // Turing
+  STD_TORCH_CHECK(version_num >= 75);
+  cutlass_scaled_mm_azp_sm75(c, a, b, a_scales, b_scales, azp_adj, azp, bias);
+  return;
+#endif
+
+  STD_TORCH_CHECK_NOT_IMPLEMENTED(
+      false,
+      "No compiled cutlass_scaled_mm_azp for a compute capability less than "
+      "CUDA device capability: ",
+      version_num);
+}

csrc/libtorch_stable/torch_bindings.cpp

@@ -31,6 +31,174 @@ STABLE_TORCH_LIBRARY_FRAGMENT(_C, ops) {
       "per_token_group_quant_int8(Tensor input, Tensor! output_q, Tensor! "
       "output_s, int group_size, float eps, float int8_min, float int8_max) -> "
       "()");
+
+  // CUTLASS w8a8 GEMM, supporting symmetric per-tensor or per-row/column
+  // quantization, as well as bias
+  ops.def(
+      "cutlass_scaled_mm(Tensor! out, Tensor a,"
+      "                  Tensor b, Tensor a_scales,"
+      "                  Tensor b_scales, Tensor? bias) -> ()");
+
+  // CUTLASS w8a8 GEMM, supporting asymmetric per-tensor or per-row/column
+  // quantization.
+  ops.def(
+      "cutlass_scaled_mm_azp(Tensor! out, Tensor a,"
+      "                  Tensor b, Tensor a_scales,"
+      "                  Tensor b_scales, Tensor azp_adj,"
+      "                  Tensor? azp, Tensor? bias) -> ()");
+
+  // Check if cutlass scaled_mm is supported for CUDA devices of the given
+  // capability
+  ops.def("cutlass_scaled_mm_supports_fp8(int cuda_device_capability) -> bool");
+
+  // Check if cutlass grouped gemm is supported for CUDA devices of the given
+  // capability
+  ops.def("cutlass_group_gemm_supported(int cuda_device_capability) -> bool");
+
+  // CUTLASS w8a8 grouped GEMM
+  ops.def(
+      "cutlass_moe_mm(Tensor! out_tensors, Tensor a_tensors, Tensor b_tensors, "
+      "               Tensor a_scales, Tensor b_scales, Tensor expert_offsets, "
+      "               Tensor problem_sizes, Tensor a_strides, "
+      "               Tensor b_strides, Tensor c_strides, bool per_act_token, "
+      "               bool per_out_ch) -> ()");
+
+  // A function that computes data required to run fused MoE with w8a8 grouped
+  // GEMM. It takes topk_ids as an input, and computes expert_offsets
+  // (token start indices of each expert). In addition to this, it computes
+  // problem sizes for each expert's multiplication used by the two mms called
+  // from fused MoE operation, and arrays with permutations required to shuffle
+  // and de-shuffle the input/output of the fused operation.
+  ops.def(
+      "get_cutlass_moe_mm_data(Tensor topk_ids, Tensor! expert_offsets, "
+      "                        Tensor! problem_sizes1, Tensor! problem_sizes2, "
+      "                        Tensor! input_permutation, "
+      "                        Tensor! output_permutation, int num_experts, "
+      "                        int n, int k, Tensor? blockscale_offsets, "
+      "                        bool is_gated) -> ()");
+
+  // compute per-expert problem sizes from expert_first_token_offset
+  // produced by vLLM's moe_permute kernel
+  ops.def(
+      "get_cutlass_moe_mm_problem_sizes_from_expert_offsets("
+      "    Tensor expert_first_token_offset, "
+      "    Tensor! problem_sizes1, "
+      "    Tensor! problem_sizes2, "
+      "    int n, int k, bool swap_ab) -> ()");
+
+  // A function that computes data required to run fused MoE with w8a8 grouped
+  // GEMM in batched expert format. It takes expert_num_tokens
+  // as an input, and computes expert_offsets (token start indices of each
+  // expert). In addition to this, it computes problem sizes for each expert's
+  // multiplication used by the two mms called from fused MoE operation.
+  ops.def(
+      "get_cutlass_batched_moe_mm_data(Tensor! expert_offsets, "
+      "                             Tensor! problem_sizes1, "
+      "                             Tensor! problem_sizes2, "
+      "                             Tensor expert_num_tokens, "
+      "                             int num_local_experts, int padded_m, "
+      "                             int n, int k) -> ()");
+
+  // Check if cutlass scaled_mm supports block quantization (used by DeepSeekV3)
+  ops.def(
+      "cutlass_scaled_mm_supports_block_fp8(int cuda_device_capability) -> "
+      "bool");
+
+  // CUTLASS nvfp4 block scaled GEMM
+  ops.def(
+      "cutlass_scaled_fp4_mm(Tensor! out, Tensor a, Tensor b,"
+      "                      Tensor block_scale_a, Tensor block_scale_b,"
+      "                      Tensor alpha) -> ()");
+
+  // cutlass nvfp4 block scaled group GEMM
+  ops.def(
+      "cutlass_fp4_group_mm(Tensor! out, Tensor a, Tensor b,"
+      " Tensor a_blockscale, Tensor b_blockscales, Tensor alphas,"
+      " Tensor problem_sizes, Tensor expert_offsets, Tensor sf_offsets) -> ()");
+
+  // Compute NVFP4 block quantized tensor.
+  ops.def(
+      "scaled_fp4_quant(Tensor input,"
+      "                 Tensor input_scale, bool "
+      "is_sf_swizzled_layout) -> (Tensor, Tensor)");
+
+  // Out variant
+  // TODO: Add out_variant tag once PyTorch supports it (added in 2.11)
+  // This registration is now migrated to stable ABI
+  // at::Tag::out_variant is not available in the stable ABI (enum_tag.h is not
+  // yet in torch/headeronly), the tag should be applied from Python
+  // via torch.library.Library.define(..., tags=(torch.Tag.out_variant,))
+  // with the .impl remaining in C++.
+  // See pytorch/pytorch#176117.
+  ops.def(
+      "scaled_fp4_quant.out(Tensor input,"
+      "                     Tensor input_scale, bool "
+      "is_sf_swizzled_layout, *, Tensor(a!) output, Tensor(b!) output_scale) "
+      "-> ()");
+
+  // Compute NVFP4 experts quantization.
+  ops.def(
+      "scaled_fp4_experts_quant(Tensor! output, Tensor! output_scale,"
+      "Tensor input, Tensor input_global_scale, Tensor input_offset_by_experts,"
+      "Tensor output_scale_offset_by_experts) -> ()");
+
+  // Fused SiLU+Mul+NVFP4 experts quantization.
+  ops.def(
+      "silu_and_mul_scaled_fp4_experts_quant(Tensor! output, Tensor! "
+      "output_scale,"
+      "Tensor input, Tensor input_global_scale, Tensor input_offset_by_experts,"
+      "Tensor output_scale_offset_by_experts) -> ()");
+
+  // Fused SiLU+Mul+NVFP4 quantization.
+  ops.def(
+      "silu_and_mul_nvfp4_quant(Tensor! result, Tensor! result_block_scale, "
+      "Tensor input, Tensor input_global_scale) -> ()");
+
+  // Check if cutlass_scaled_mm_fp4 is supported for CUDA devices
+  // of the given capability
+  ops.def("cutlass_scaled_mm_supports_fp4(int cuda_device_capability) -> bool");
+
+  // CUTLASS w4a8 GEMM
+  ops.def(
+      "cutlass_w4a8_mm("
+      "   Tensor A,"
+      "   Tensor B,"
+      "   Tensor group_scales,"
+      "   int    group_size,"
+      "   Tensor channel_scales,"
+      "   Tensor token_scales,"
+      "   ScalarType? out_type,"
+      "   str?   maybe_schedule"
+      ") -> Tensor");
+
+  // pack scales
+  ops.def("cutlass_pack_scale_fp8(Tensor scales) -> Tensor");
+
+  // encode and reorder weight matrix
+  ops.def("cutlass_encode_and_reorder_int4b(Tensor B) -> Tensor");
+
+  // CUTLASS w4a8 grouped GEMM
+  ops.def(
+      "cutlass_w4a8_moe_mm("
+      "   Tensor! out_tensors,"
+      "   Tensor a_tensors,"
+      "   Tensor b_tensors,"
+      "   Tensor a_scales,"
+      "   Tensor b_scales,"
+      "   Tensor b_group_scales,"
+      "   int b_group_size,"
+      "   Tensor expert_offsets,"
+      "   Tensor problem_sizes,"
+      "   Tensor a_strides,"
+      "   Tensor b_strides,"
+      "   Tensor c_strides,"
+      "   Tensor group_scale_strides,"
+      "   str? maybe_schedule"
+      ") -> ()");
+
+  ops.def(
+      "cutlass_encode_and_reorder_int4b_grouped(Tensor b_tensors) -> (Tensor, "
+      "Tensor)");
 #endif
 }
 
@@ -46,6 +214,45 @@ STABLE_TORCH_LIBRARY_IMPL(_C, CUDA, ops) {
            TORCH_BOX(&per_token_group_quant_8bit_packed));
   ops.impl("per_token_group_quant_int8",
            TORCH_BOX(&per_token_group_quant_int8));
+
+  // CUTLASS scaled_mm ops
+  ops.impl("cutlass_scaled_mm", TORCH_BOX(&cutlass_scaled_mm));
+  ops.impl("cutlass_scaled_mm_azp", TORCH_BOX(&cutlass_scaled_mm_azp));
+  ops.impl("cutlass_moe_mm", TORCH_BOX(&cutlass_moe_mm));
+  ops.impl("get_cutlass_moe_mm_data", TORCH_BOX(&get_cutlass_moe_mm_data));
+  ops.impl("get_cutlass_moe_mm_problem_sizes_from_expert_offsets",
+           TORCH_BOX(&get_cutlass_moe_mm_problem_sizes_from_expert_offsets));
+  ops.impl("get_cutlass_batched_moe_mm_data",
+           TORCH_BOX(&get_cutlass_batched_moe_mm_data));
+
+  // FP4/NVFP4 ops
+  ops.impl("cutlass_scaled_fp4_mm", TORCH_BOX(&cutlass_scaled_fp4_mm));
+  ops.impl("scaled_fp4_quant", TORCH_BOX(&scaled_fp4_quant_func));
+  ops.impl("scaled_fp4_quant.out", TORCH_BOX(&scaled_fp4_quant_out));
+  ops.impl("scaled_fp4_experts_quant", TORCH_BOX(&scaled_fp4_experts_quant));
+  ops.impl("silu_and_mul_scaled_fp4_experts_quant",
+           TORCH_BOX(&silu_and_mul_scaled_fp4_experts_quant));
+  ops.impl("silu_and_mul_nvfp4_quant", TORCH_BOX(&silu_and_mul_nvfp4_quant));
+
+  // W4A8 ops: impl registrations are in the source files
+  // (w4a8_mm_entry.cu and w4a8_grouped_mm_entry.cu)
+#endif
+}
+
+// These capability-check functions take only primitive args (no tensors), so
+// there is no device to dispatch on. CompositeExplicitAutograd makes them
+// available for all backends. This is the stable ABI equivalent of calling
+// ops.impl("op_name", &func) without a dispatch key in the non-stable API.
+STABLE_TORCH_LIBRARY_IMPL(_C, CompositeExplicitAutograd, ops) {
+#ifndef USE_ROCM
+  ops.impl("cutlass_scaled_mm_supports_fp8",
+           TORCH_BOX(&cutlass_scaled_mm_supports_fp8));
+  ops.impl("cutlass_group_gemm_supported",
+           TORCH_BOX(&cutlass_group_gemm_supported));
+  ops.impl("cutlass_scaled_mm_supports_block_fp8",
+           TORCH_BOX(&cutlass_scaled_mm_supports_block_fp8));
+  ops.impl("cutlass_scaled_mm_supports_fp4",
+           TORCH_BOX(&cutlass_scaled_mm_supports_fp4));
 #endif
 }
 

csrc/libtorch_stable/torch_utils.h

@@ -1,10 +1,17 @@
 #pragma once
 
 #include <torch/csrc/inductor/aoti_torch/c/shim.h>
+#include <torch/csrc/stable/accelerator.h>
+#include <torch/csrc/stable/ops.h>
+#include <torch/csrc/stable/tensor.h>
 #include <torch/headeronly/util/shim_utils.h>
 
 #include <cuda_runtime.h>
 
+// Stable ABI equivalent of TORCH_CHECK_NOT_IMPLEMENTED.
+#define STD_TORCH_CHECK_NOT_IMPLEMENTED(cond, ...) \
+  STD_TORCH_CHECK(cond, "NotImplementedError: ", __VA_ARGS__)
+
 // Utility to get the current CUDA stream for a given device using stable APIs.
 // Returns a cudaStream_t for use in kernel launches.
 inline cudaStream_t get_current_cuda_stream(int32_t device_index = -1) {

csrc/mamba/mamba_ssm/selective_scan.h

@@ -21,7 +21,7 @@ struct SSMParamsBase {
     int dim_ngroups_ratio;
     bool is_variable_B;
     bool is_variable_C;
-    int64_t pad_slot_id;
+    int64_t null_block_id;
 
     bool delta_softplus;
     bool cache_enabled;

csrc/mamba/mamba_ssm/selective_scan_fwd.cu

@@ -118,9 +118,17 @@ void selective_scan_fwd_kernel(SSMParamsBase params) {
 
     const int* cache_indices = params.cache_indices_ptr == nullptr ? nullptr
         : reinterpret_cast<int *>(params.cache_indices_ptr);
-    const int cache_index = cache_indices == nullptr ? batch_id : cache_indices[batch_id]; 
-    // cache_index == params.pad_slot_id is defined as padding, so we exit early
-    if (cache_index == params.pad_slot_id){
+    int cache_index;
+    if (cache_indices == nullptr) {
+        cache_index = batch_id;
+    } else if (params.cache_enabled) {
+        const int* initial_state_idx = reinterpret_cast<const int*>(params.initial_state_idx_ptr);
+        cache_index = cache_indices[batch_id * params.cache_indices_stride + initial_state_idx[batch_id]];
+    } else {
+        cache_index = cache_indices[batch_id];
+    }
+    // Skip batch entries whose cache index maps to the null block (padding).
+    if (cache_indices != nullptr && cache_index == params.null_block_id){
         return;
     }
     input_t *u = reinterpret_cast<input_t *>(params.u_ptr) + sequence_start_index * params.u_batch_stride
@@ -527,7 +535,7 @@ void set_ssm_params_fwd(SSMParamsBase &params,
                         const std::optional<at::Tensor>& cache_indices,
                         const std::optional<at::Tensor>& has_initial_state,
                         bool varlen,
-                        int64_t pad_slot_id,
+                        int64_t null_block_id,
                         int64_t block_size,
                         const std::optional<torch::Tensor> &block_idx_first_scheduled_token,
                         const std::optional<torch::Tensor> &block_idx_last_scheduled_token,
@@ -544,7 +552,7 @@ void set_ssm_params_fwd(SSMParamsBase &params,
     params.dstate = dstate;
     params.n_groups = n_groups;
     params.dim_ngroups_ratio = dim / n_groups;
-    params.pad_slot_id = pad_slot_id;
+    params.null_block_id = null_block_id;
 
     params.delta_softplus = delta_softplus;
 
@@ -658,7 +666,7 @@ void selective_scan_fwd(const torch::Tensor &u, const torch::Tensor &delta,
                   const torch::Tensor &ssm_states,
                   // used to identify padding entries if cache_indices provided
                   // in case of padding, the kernel will return early
-                  int64_t pad_slot_id,
+                  int64_t null_block_id,
                   int64_t block_size,
                   const std::optional<torch::Tensor> &block_idx_first_scheduled_token,
                   const std::optional<torch::Tensor> &block_idx_last_scheduled_token,
@@ -805,7 +813,7 @@ void selective_scan_fwd(const torch::Tensor &u, const torch::Tensor &delta,
                        cache_indices,
                        has_initial_state,
                        varlen,
-                       pad_slot_id,
+                       null_block_id,
                        block_size,
                        block_idx_first_scheduled_token,
                        block_idx_last_scheduled_token,

csrc/moe/marlin_moe_wna16/kernel.h

@@ -13,7 +13,7 @@
       const int4 *__restrict__ b_bias_ptr,                            \
       const float *__restrict__ a_scales_ptr,                         \
       const int4 *__restrict__ scales_ptr,                            \
-      const uint16_t *__restrict__ global_scale_ptr,                  \
+      const float *__restrict__ global_scale_ptr,                     \
       const int4 *__restrict__ zp_ptr, const int *__restrict__ g_idx, \
       const int32_t *__restrict__ sorted_token_ids_ptr,               \
       const int32_t *__restrict__ expert_ids_ptr,                     \

csrc/moe/marlin_moe_wna16/marlin_template.h

@@ -260,7 +260,7 @@ __global__ void Marlin(
     // fp16 quantization scales. shape (k/groupsize, n)
     const int4* __restrict__ scales_ptr,
     // fp16 global scale (for nvfp4// only)
-    const uint16_t* __restrict__ global_scale_ptr,
+    const float* __restrict__ global_scale_ptr,
     // 4bit packed zero-points of shape
     // (k/groupsize, n/pack_factor)
     const int4* __restrict__ zp_ptr,
@@ -308,7 +308,14 @@ __global__ void Marlin(
   constexpr int moe_block_size = m_block_size_8 ? 8 : (16 * thread_m_blocks);
 
   #if defined(__CUDA_ARCH__) && __CUDA_ARCH__ == 750
-  constexpr bool use_fp16_accum = a_type_id == vllm::kFloat16.id();
+  static constexpr auto num_bits =
+      vllm::ScalarType::from_id(b_type_id).size_bits();
+  // Disable use_fp16_accum for NVFP4 and cases when group_size == -1 &&
+  // num_bits == 4
+  constexpr bool use_fp16_accum =
+      a_type_id == vllm::kFloat16.id() &&
+      (!(b_type_id == vllm::kFE2M1f.id() && s_type_id == vllm::kFE4M3fn.id()) &&
+       !(group_blocks == -1 && num_bits == 4));
   #else
   constexpr bool use_fp16_accum = false;
   #endif
@@ -357,7 +364,7 @@ __global__ void Marlin(
       has_zp && !is_zp_float && !std::is_same<scalar_t, nv_bfloat16>::value ||
       has_zp && !is_zp_float && !(b_type == vllm::kU8);
 
-  c_scalar_t2 global_scale;
+  float global_scale_f32 = 1.0f;
 
   constexpr bool has_act_order = group_blocks == 0;
 
@@ -507,11 +514,12 @@ __global__ void Marlin(
 
       if (mul_topk_weights) {
         idx = idx < prob_m_top_k ? idx : 0;
-        c_scalar_t2 topk_weight_val =
-            Cdtype::num2num2(Cdtype::float2num(topk_weights_ptr[idx]));
+        float topk_weight_tmp = topk_weights_ptr[idx];
         if constexpr (b_type == vllm::kFE2M1f && s_type == vllm::kFE4M3fn) {
-          topk_weight_val = __hmul2(topk_weight_val, global_scale);
+          topk_weight_tmp *= global_scale_f32;
         }
+        c_scalar_t2 topk_weight_val =
+            Cdtype::num2num2(Cdtype::float2num(topk_weight_tmp));
         sh_block_topk_weights[threadIdx.x] = topk_weight_val;
       }
     }
@@ -532,8 +540,7 @@ __global__ void Marlin(
     expert_id = expert_ids_ptr[block_id];
 
     if constexpr (b_type == vllm::kFE2M1f && s_type == vllm::kFE4M3fn) {
-      uint16_t val = global_scale_ptr[expert_id];
-      global_scale = Cdtype::num2num2(*reinterpret_cast<c_scalar_t*>(&val));
+      global_scale_f32 = global_scale_ptr[expert_id];
     }
 
     B_expert_off = expert_id * prob_n * prob_k / (pack_factor * 4);
@@ -1784,6 +1791,13 @@ __global__ void Marlin(
     // We first reorder in shared memory to guarantee the most efficient final
     // global write patterns
     auto write = [&](int idx, float c0, float c1, FragS& s, FragS& b_bias) {
+      if constexpr (b_type == vllm::kFE2M1f && s_type == vllm::kFE4M3fn) {
+        if (!mul_topk_weights) {
+          c0 *= global_scale_f32;
+          c1 *= global_scale_f32;
+        }
+      }
+
       c_scalar_t2 res =
           Cdtype::nums2num2(Cdtype::float2num(c0), Cdtype::float2num(c1));
 
@@ -1800,11 +1814,6 @@ __global__ void Marlin(
         res = __hmul2(res, tmp_scale);
       }
 
-      if constexpr (b_type == vllm::kFE2M1f && s_type == vllm::kFE4M3fn) {
-        if (!mul_topk_weights) {
-          res = __hmul2(res, global_scale);
-        }
-      }
       if (has_bias && last) {
         c_scalar_t2 tmp_bias = b_bias[0];
         if constexpr (m_block_size_8) {

csrc/moe/marlin_moe_wna16/ops.cu

@@ -382,7 +382,7 @@ void marlin_mm(const void* A, const void* B, void* C, void* C_tmp, void* b_bias,
   const int4* bias_ptr = (const int4*)b_bias;
   const float* a_s_ptr = (const float*)a_s;
   const int4* b_s_ptr = (const int4*)b_s;
-  const uint16_t* g_s_ptr = (const uint16_t*)g_s;
+  const float* g_s_ptr = (const float*)g_s;
   const int4* zp_ptr = (const int4*)zp;
   const int* g_idx_ptr = (const int*)g_idx;
   const int* perm_ptr = (const int*)perm;
@@ -759,7 +759,7 @@ torch::Tensor moe_wna16_marlin_gemm(
     TORCH_CHECK(b_type == vllm::kFE2M1f && s_type == vllm::kFE4M3fn,
                 "global_scale can only be used for nvfp4 format.");
   } else {
-    global_scale = torch::empty({0}, options);
+    global_scale = torch::empty({0}, options_fp32);
     TORCH_CHECK(!(b_type == vllm::kFE2M1f && s_type == vllm::kFE4M3fn),
                 "the global_scale parameter must be passed for nvfp4 format.");
   }
@@ -842,8 +842,8 @@ torch::Tensor moe_wna16_marlin_gemm(
 
   TORCH_CHECK(a_scales.scalar_type() == at::ScalarType::Float,
               "scalar type of a_scales must be float");
-  TORCH_CHECK(global_scale.scalar_type() == c.scalar_type(),
-              "scalar type of global_scale must be the same with c");
+  TORCH_CHECK(global_scale.scalar_type() == at::ScalarType::Float,
+              "scalar type of global_scale must be float");
   if (a_type.size_bits() == 16) {
     TORCH_CHECK(
         a.scalar_type() == c.scalar_type(),